Introduction
Thank you for purchasing the Huina 1561 1:14 Scale 22 Channel RC Fire Truck. This highly detailed remote-controlled engineering vehicle is designed to provide a realistic and engaging experience with its multi-joint ladder, water spray function, and authentic lights and sounds. Please read this manual carefully before operation to ensure safe and optimal performance.
Safety Information
- Warning: Not suitable for children under 36 months due to small parts. Adult supervision is recommended during operation.
- This product contains a Lithium Battery. Handle with care and follow all battery safety guidelines.
- Ensure the product is used in a safe environment, away from obstacles, people, and pets.
- Do not modify or disassemble the product.
Package Contents
Verify that all items are present in your package:
- 1 x Huina 1561 RC Fire Truck
- 1 x 2.4GHz Remote Control
- 1 x Lithium Battery (for truck)
- 1 x USB Charging Cable
- 1 x Screwdriver
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1561 |
| Scale | 1:14 |
| Control Channels | 22 Channels & Up |
| Remote Control Frequency | 2.4GHz Anti-interference High Frequency |
| Remote Distance | Up to 100m (30m listed in product properties) |
| Power Source | Electric (Lithium Battery) |
| Controller Battery | AA (not included) |
| Motor Type | Brush Motor |
| State of Assembly | Ready-to-Go |
| Material | Metal, Plastic |
| Ladder Length (Extended) | 85cm |
| Workbench Rotation | 270° |
| Water Tank Capacity | Approx. 300ml |
| Water Spray Distance | More than 5 meters |
| Endurance | Approx. 30 minutes |
| Product Dimensions (L x W x H) | Approx. 63cm x 14cm x 23cm (with ladder retracted) |
| Package Dimensions (L x W x H) | 61cm x 28cm x 22cm |
| Weight | 3.92 kg |
| Certification | CE |
Setup
1. Battery Installation
For the RC Fire Truck:
- Locate the battery compartment on the underside of the fire truck.
- Use the provided screwdriver to open the compartment.
- Connect the included Lithium Battery to the truck's power connector.
- Carefully place the battery inside the compartment and close the cover, securing it with the screw.
For the Remote Control:
- Locate the battery compartment on the back of the remote control.
- Open the compartment and insert the required AA batteries (not included), ensuring correct polarity.
- Close the battery compartment cover.
2. Charging the Truck Battery
- Connect the Lithium Battery to the USB Charging Cable.
- Plug the USB cable into a suitable USB power source (e.g., computer, USB wall adapter).
- The charging indicator light on the cable will show the charging status. Charge until fully charged (refer to battery instructions for specific times).
3. Filling the Water Tank
- Locate the water inlet on the top of the fire truck (indicated by '注水口' in images).
- Carefully pour clean water into the tank. The tank has a capacity of approximately 300ml. Do not overfill.
- Ensure the cap is securely closed after filling.
Operating Instructions
1. Power On/Off
- Turn on the power switch on the fire truck.
- Turn on the power switch on the remote control. The remote and truck should automatically pair. If not, refer to the remote control's specific pairing instructions.
2. Basic Movement
Use the joysticks on the remote control for basic truck movement:
- Forward/Backward: Push the left joystick up/down.
- Turn Left/Right: Push the right joystick left/right.
3. Ladder Operation (22 Channels)
The fire truck features a multi-joint ladder with extensive control. Refer to the remote control diagram for specific button functions.
- Ladder Lift/Lower: Use designated buttons/joysticks to raise or lower the ladder. The ladder can extend up to 85cm.
- Workbench Rotation: The ladder operation table can rotate 270 degrees. Use the corresponding controls to rotate the ladder left or right.
- Ladder Extension/Retraction: Control the extension and retraction of the ladder sections.
4. Water Spray Function
Once the water tank is filled, activate the water spray using the dedicated button on the remote control. The water can spray a distance of more than 5 meters.
5. Lights and Sounds
The fire truck is equipped with realistic lights and sounds. These features are typically activated automatically when the truck is powered on or can be controlled via specific buttons on the remote control.
6. Product Demonstration Video
Maintenance
- Cleaning: Wipe the truck and remote control with a soft, dry cloth. Do not use water or chemical cleaners.
- Battery Care: Always remove batteries from the remote control when not in use for extended periods. For the truck's Lithium Battery, charge it fully before storage and periodically during long storage to maintain battery health.
- Storage: Store the product in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Tank: After using the water spray function, empty any remaining water from the tank to prevent mold or residue buildup.
Troubleshooting
- Truck not responding: Ensure both the truck and remote control are powered on and batteries are fully charged/fresh. Check for proper battery installation.
- Weak water spray: Verify the water tank is sufficiently filled. Check for any blockages in the spray nozzle.
- Limited range: Ensure there are no strong interferences (e.g., other 2.4GHz devices) in the operating area. Check remote control battery levels.
- Lights/Sounds not working: Check power connections and battery levels.
User Tips
- For best performance, operate the fire truck on flat, smooth surfaces.
- Practice controlling the ladder and water spray in an open area to get familiar with the multi-channel controls.
- Always use clean, filtered water for the spray function to prevent clogging.
Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For technical support or warranty claims, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.
