Introduction
The ROJECO Automatic Pet Water Fountain (Model RYSJ-12) is designed to provide a continuous supply of clean, fresh water for your pets. Its circulating filtration system encourages pets to drink more, contributing to their overall health and happiness. This manual provides essential information for the proper setup, operation, and maintenance of your pet water fountain.
Video: Overview of the ROJECO Pet Water Fountain features and operation.
Product Features
- 1.5L (50oz) Capacity: Sufficient water supply for an adult cat for approximately 5-7 days.
- Ultra Quiet Pump: Operates at less than 30dB, ensuring a peaceful environment for you and your pets.
- Double Filtration System: Includes an Activated Carbon Filter to remove heavy metals and impurities, and a Sponge Filter to capture hair, debris, and large particles.
- Two Water Flow Modes:
- Spout Mode: Provides a gentle trickle, appealing to pets who prefer drinking from a faucet.
- Fountain Mode: Offers a wide, gentle spring flow, increasing oxygen content in the water.
- Safe 5V Low Voltage: Designed with pet safety in mind, preventing electric shock even if pets bite the wire.
- Convenient Power Options: Can be powered via an adapter, USB interface, or a power bank (not included).
- 120ml Emergency Water Storage: Ensures your pet has access to water for up to one day during power outages or other emergencies.
Image: Key features of the ROJECO Pet Water Fountain.
Package Contents
Please check the package to ensure all components are present:
- 1x ROJECO Pet Water Fountain (1.5L)
- 1x Water Pump
- 1x Sponge Filter
- 1x Fountain Filter (Activated Carbon Filter)
- 1x EU Adapter (Note: This product comes with an EU plug. Please ensure compatibility or use an appropriate adapter for your region.)
Image: ROJECO Pet Water Fountain and its components.
Setup Instructions
- Clean Before Use: Thoroughly clean all components of the fountain before initial use.
- Place the Fountain: Position the fountain in an easily accessible location for your pet.
- Prepare the Filter: The filter must be fully soaked in water for 5-10 minutes before installation. This prevents water from not diffusing properly and causing overflow.
- Assemble Filtration System: Refer to the diagram below for proper assembly of the pump, filter tray, sponge filter, and activated carbon filter.
- Fill with Water: Fill the water tank with fresh water, ensuring the water level is between the MAX and MIN marks. The pump must be completely submerged in water.
- Connect Power: Connect the adapter to the fountain and plug it into a power outlet. Alternatively, use a USB interface or a power bank.
Image: Circulating Filtration System Diagram.
Operating Instructions
Once set up, the fountain will begin circulating water. You can choose between two water flow modes:
- Spout Mode: Provides a continuous stream of water, mimicking a tap.
- Fountain Mode: Offers a bubbling spring effect, increasing water oxygenation.
The fountain is designed for continuous operation, providing fresh water for your pets. Its low voltage design ensures safety.
Image: Two Water Flow Modes.
Image: 120ml Emergency Water Storage.
Maintenance
Regular cleaning and filter replacement are crucial for maintaining water quality and the longevity of your fountain.
- Weekly Cleaning: Clean the entire fountain, including the pump, water tray, and water tank, every week.
- Filter Replacement: Replace the Activated Carbon Filter and Sponge Filter every 2 to 4 weeks, or immediately if you notice a decrease in water flow or water quality.
- Multiple Pets: If you have multiple pets, their saliva can make the water tray and tank sticky. In such cases, clean the inner components and replace the water more frequently. Timely filter replacement is especially important.
- Cleaning Precautions:
- Do not wash plastic parts in a dishwasher.
- Avoid getting soap into the filter, as it may not rinse out completely.
Image: Double Filtration System details.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water overflow during initial use | Filter not fully soaked before installation. | Ensure the filter is soaked for 5-10 minutes before turning on the fountain. |
| Decreased water flow | Clogged filter or pump. | Clean the pump and replace the filters (Activated Carbon and Sponge). |
| Water tank/tray feels sticky | Saliva buildup, especially with multiple pets. | Clean the fountain components more frequently and replace the filters as needed. |
| Fountain not working (no water flow) | No power, pump issue, or water level too low. | Check power connection. Ensure water level is above MIN mark. Clean the pump for any blockages. |
Specifications
| Product Name | ROJECO Pet Water Fountain |
| Model | RYSJ-12 |
| Capacity | 1.5L / 50oz |
| Adapter Input | 100-240V 50/60Hz |
| Adapter Output | 5V 1000mA |
| Rated Input | 5V = 1A Max |
| Filter Type | Carbon filter / Sponge filter |
| Material | ABS Plastic |
| Dimensions (approx.) | 145mm (W) x 166mm (H) / 5.7in (W) x 6.5in (H) |
| Smart Device | No |
| LCD Display | No |
| Time Setting | No |
Image: Product Dimensions and Specifications.
User Tips
- Always soak new filters for 5-10 minutes before placing them in the fountain to ensure proper water flow and prevent initial overflow.
- For households with multiple pets, consider more frequent cleaning and filter changes to combat saliva buildup and maintain water freshness.
- The 120ml emergency water storage is a great feature for short power outages. For longer periods away from a power source, you can power the fountain using a compatible power bank.
- This model is straightforward to use, as it does not include complex features like motion sensors or LCD displays, simplifying operation.
Warranty and Support
For any questions, concerns, or technical support regarding your ROJECO Automatic Pet Water Fountain, please contact the seller or manufacturer's customer service. Keep your purchase receipt for warranty claims.
