MOES Tuya ZigBee Smart Sliding Window Pusher

1. Introduction

The MOES Tuya ZigBee Smart Sliding Window Pusher is an innovative device designed to automate the opening and closing of sliding windows. Featuring solar charging, app remote control, and voice control compatibility with platforms like Alexa and Google Home, it offers convenience and enhanced home automation. This device is drilling-free and requires no complex wiring for installation.

Figure 1: Product overview highlighting key features like drilling-free, no wiring, solar charging, and compatibility with smart home platforms.

2. Safety Information

• Ensure the device is installed securely to prevent accidental detachment.
• Keep hands and fingers clear of the window and the device's moving parts during operation to avoid pinching.
• Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
• Keep the device away from water and extreme temperatures.
• This device is intended for indoor use on sliding windows only.

3. Package Contents

Please check the package for the following items:

• Smart Sliding Windows Pusher ×1
• Plastic Positioning Bracket and Metal Frame ×1
• Wedge-shaped Block ×1
• Limiter ×1
• User Manual ×1
• Magnetic Sheet (with Adhesive) ×2
• USB Charging Cable ×1
• A pair of Installation Screws and Drill Bits ×1
• Glue and Wiping Cloth ×1

Figure 2: All items included in the product package.

4. Specifications

Figure 3: Detailed dimensions of the Smart Sliding Window Pusher.

5. Installation

5.1 Pre-installation Checks

Before proceeding with installation, ensure your window meets the following conditions:

1. The space between the inner edge of the window frame and the friction surface must be greater than 1cm.
2. The side of the window sash should not be loose. The window frame or door frame side surface cover must be firm.
3. The doors and windows should not be hard to push and pull. It should be easy to slide the door and window left and right without excessive pressure.

Figure 4: Visual guide for checking the space between the window frame and friction surface.

Figure 5: Illustration of a loose window sash, which is not suitable for installation.

Figure 6: Demonstrating a window that is hard to push or pull, indicating unsuitability for installation.

5.2 Installation Steps

1. Close the Window: Close the window completely. If the window is equipped with locks, you can directly lock the window to fix it.
2. Install Limiter (if no latch): If there is no latch, clamp the window's slide with the limiter included in the box and use the spanner to tighten it.
3. Insert Wedge-shaped Block: Insert the wedge-shaped block firmly into the gap between the window sash.
4. Apply Glue: The glue in the package can be used for two times in total. A single installation controls the amount of glue applied to half of the glue so as not to affect the curing effect and cause deviation of the installation position. Apply glue evenly to the side of the metal frame.
5. Position Bracket: Place the positioning bracket and metal frame against the surface of the rear sash. Slide smoothly to the side of the front sash. Press for 5 minutes until cemented, then let it stand for 5 minutes. Do not touch it during this process.
6. Remove Wedge-shaped Block: Remove the wedge-shaped block after the bracket is firmly stuck.
7. Attach Magnetic Sheets: Paste a piece of magnetic sheet in the hole above the positioning bracket. Open the window until the positioning bracket is flush with the edge of the inner frame of the outer sash. Attach another piece of magnet to the hole above the positioning frame as well. Keep the two magnetic sheets on the same horizontal line for more accurate positioning.
8. Install Window Pusher: Peel off the sticker from the bracket and pull the bracket out from the side. Put the top of the window opener into the frame first, then snap firmly into the bottom and push into the buckle and press tightly.

Important Note: During installation, be careful not to touch the button on the product to prevent hand pinching while the rubber wheel is rotating.

5.3 ZigBee Gateway Requirement

NOTE: A ZigBee gateway is required for the smart functions of this device. Please purchase one additionally if you do not already have one.

Figure 7: Diagram illustrating the connection of the window pusher to a WiFi router and gateway for APP and voice control.

6. Operation

6.1 Product Networking (Pairing)

To connect your Smart Sliding Window Pusher to your smart home system:

1. Ensure your ZigBee gateway is powered on and connected to your network.
2. Press any front button on the window pusher three times and hold it for about 5 seconds on the third press. The indicator light will flash.
3. Open the MOES App (or Tuya Smart Life App) and navigate to your gateway.
4. Select 'Zigbee devices list' and tap 'Add devices' or 'Search device'.
5. The app will discover the window pusher. Once found, add it to your device list.

6.2 App Remote Control

Once paired, you can control your window pusher via the MOES App (or Tuya Smart Life App) from anywhere. The app allows you to:

• Open or close the window.
• Adjust the window open/closed ratio (accurate percentage control).
• Monitor battery level and charging status.
• Set up timing schedules for automatic operation.

Figure 8: Screenshot of the mobile application interface for remote control.

Figure 9: The app allows precise control over the window's opening percentage.

6.3 Voice Control

Integrate the window pusher with voice assistants like Amazon Alexa or Google Home for hands-free control. Simply use commands such as "Alexa, open the window" or "Hey Google, close the window to 50%."

Figure 10: Demonstrating voice control functionality with smart speakers.

6.4 Automatic Opening and Closing

The device supports automatic opening and closing of windows. You can set up schedules or use smart linkages for automated ventilation.

Figure 11: The device automatically opens and closes the window, with manual mode toggle available in the app.

6.5 Timed Opening for Ventilation

Utilize the timing function to schedule window openings and closings, ensuring optimal indoor air circulation and protecting your family's health. For example, set the window to open at 9:00 am and close at 9:30 am.

Figure 12: Example of setting a timed schedule for window ventilation.

6.6 Smart Linkage

Unlock advanced automation by linking the window pusher with other smart sensors. For instance, if a temperature and humidity sensor detects high indoor levels, the linked window pusher can automatically open the window for ventilation and cooling.

Figure 13: Diagram showing smart linkage between the window pusher and a temperature/humidity sensor.

6.7 Manual Control

The device also supports manual push and pull sensing, allowing you to operate the window directly if needed.

7. Maintenance

• Cleaning: Use the provided wiping cloth or a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
• Charging: The device features solar charging for continuous endurance. If additional charging is needed, use the provided USB Type-C cable.
• Firmware Updates: Periodically check the MOES App for any available firmware updates to ensure optimal performance and new features.

Figure 14: The device supports solar charging and has a Type-C port for alternative charging.

8. Troubleshooting

• Device not responding: Check if the battery is charged. Ensure the ZigBee gateway is online and the device is within range. Re-pair the device if necessary.
• Window not opening/closing smoothly: Verify that the window slides freely without obstruction. Check the installation of the positioning bracket and ensure it's flush.
• App control issues: Ensure your smartphone has an active internet connection and the MOES App is up to date. Restart the app or your phone if problems persist.
• Voice control not working: Confirm that the device is correctly linked to Alexa or Google Home and that your voice commands are clear and recognized.

9. User Tips

• Push Force: The device has a maximum push force of 50N, which is approximately 5.1 kg. Ensure your window does not require more force than this for smooth operation.
• Installation Direction: The device supports both left and right installation. You can adjust the installation direction setting within the app for optimal performance.

Figure 15: App interface showing options for left or right installation.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official MOES website. Keep your purchase receipt as proof of purchase.