Introduction
This manual provides comprehensive instructions for the Rollerhouses AC123 series wireless RF433.92 controller transmitter remote. This device is designed to wirelessly control electric blinds, offering convenience and ease of use. The AC123 series includes 1-channel, 2-channel, 6-channel, and 16-channel remotes, allowing for individual or group control of multiple shades.
Important Compatibility Note:
This remote is specifically designed for A-OK RF Motors. It is not a generic remote and may not work with motors from other brands, even if they have a similar appearance. Specifically, this remote is NOT compatible with LEVOLOR Blinds or Hunter-Douglas blinds. Please ensure your blinds motor is compatible with Rollerhouses A-OK RF systems before use.
Image: AC123 remote in use, with a note about checking compatibility with your RF roller motor.
Package Contents
Upon opening your package, please verify that all the following items are included:
- AC123 Series Remote Control (1, 2, 6, or 16 Channel model as ordered)
- Wall Mount Base
- Mounting Hardware (screws)
- CR2032 Button Battery (pre-installed or separate)
Image: The AC123 remote control and its accompanying wall mount base and screws.
Setup and Installation
1. Battery Installation
The remote control is powered by a CR2032 button battery. Ensure the battery is correctly inserted, observing polarity (+/-) if not pre-installed.
2. Wall Mount Installation
The included wall mount base allows for convenient storage and access to your remote. Use the provided screws to secure the base to a desired wall location. The remote can then be easily slid into the mount.
Video: Demonstrates how to install the remote control into its wall mount.
3. Remote Programming and Limit Setting
Refer to the detailed diagram below for programming your remote and setting the upper and lower limits for your electric blinds. This process involves interacting with both the remote and the motor's PROG button.
- Initial Pairing and Limit Setting:
- On the remote, select the desired channel (if multi-channel).
- Press and HOLD the inset button on the BACK of the control (use a paper clip or small screwdriver). The shade motor will rotate briefly up and down (jog) to indicate it's in limit setting mode.
- While in limit setting mode, use the UP (▲) or DOWN (▼) buttons to adjust the desired upper and lower positions for your shade.
- Press the Setting button (on the back of the remote) to save the limit positions. The shade motor will jog briefly up and down to confirm that the limits are set and pairing is finished.
- Adjusting Upper/Lower Limits (for an already paired motor):
- Press and HOLD the inset button on the BACK of the control. The shade motor will jog briefly up and down to enter limit setting mode.
- Use the UP (▲) or DOWN (▼) buttons to adjust your desired upper or lower position.
- Press the Setting button (on the back of the remote) to save the new limit position. The shade motor will jog briefly up and down to confirm the limit position is done.
Image: AC123 Remote Instruction diagram, detailing programming, limit setting, and troubleshooting.
Operating Instructions
The AC123 remote provides intuitive control over your electric blinds. Familiarize yourself with the buttons:
- Up Button (▲): Moves the blind upwards.
- Stop Button (■): Stops the blind at its current position.
- Down Button (▼): Moves the blind downwards.
- Channel Button: On multi-channel remotes, this button cycles through the available channels to select which blind or group of blinds to control.
Image: Front and back of the AC123 remote, highlighting button functions and specifications.
Multi-Channel Control
For AC123-02 (2 Channel), AC123-06 (6 Channel), and AC123-16 (16 Channel) remotes, you can control multiple blinds or groups of blinds independently. Use the "Channel" button to switch between the programmed channels. The LCD display (if present on your model) will indicate the currently selected channel.
Image: Various AC123 remote models demonstrating multi-channel control.
Adding a New Controller to a Shade
Multiple controllers can be linked to one shade. To add a new remote to an already programmed shade:
- Press the STOP button on the currently paired remote (Remote A). The motor will jog once.
- Press the UP button on the new remote. The motor will jog again, confirming the new remote has been paired with the shade.
Maintenance
Battery Replacement
The remote control uses a CR2032 button battery. When the remote's performance degrades or the indicator light no longer illuminates, it's time to replace the battery. Carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery, ensuring correct polarity.
Cleaning
To clean the remote, gently wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the device.
Troubleshooting
If you encounter issues with your AC123 remote or electric blinds, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not turn after installation. |
|
|
| Motor stops working. |
|
|
| Remote not pairing or controlling blinds. |
|
|
Deleting All Memory (Factory Reset)
To reset the motor to factory settings, deleting all programmed remotes and limits:
- Press the PROG button on the motor for 7 seconds.
- The motor will jog once, then twice later, indicating all limits and remotes have been deleted.
Specifications
| Feature | Detail |
|---|---|
| Brand | Rollerhouses |
| Model Series | AC123-01, AC123-06, AC123-16 (and other channel variants) |
| RF Frequency | 433.92MHz |
| Channels | 1, 2, 6, or 16 (depending on model) |
| Battery Type | 3V CR2032 Button Battery |
| Wireless Range | Approximately 70 feet (through several walls and different floors) |
| Origin | Mainland China |
User Tips
- Always double-check the brand and model of your electric blinds motor to ensure compatibility with the AC123 remote. Incompatible remotes will not function.
- When programming, ensure you are in close proximity to the motor for reliable signal transmission.
- If controlling multiple blinds, consider labeling your remote channels for easier identification and control.
Warranty and Support
For any questions, technical assistance, or warranty inquiries regarding your Rollerhouses AC123 series remote control, please contact the seller or manufacturer directly. Keep your purchase records handy for faster service.
