Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Rollerhouses AC114 Series Blinds Transmitter. This wireless remote control is designed to operate motorized roller shades and blinds using RF 433.92MHz technology. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The AC114 series transmitters are available in various channel configurations, including 1-channel, 2-channel, 6-channel, and 16-channel options, allowing control over individual or multiple groups of blinds.
Figure 1: Different channel versions of the AC114 remote controllers.
Setup
1. Battery Installation
The AC114 transmitter requires two AAA batteries (3V total) for operation. Follow these steps to install the batteries:
- Remove the battery compartment cover on the back of the remote.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover.
Video 1: Demonstration of battery installation and remote holder use.
Figure 2: Remote, wall mount, and AAA batteries included.
2. Wall Mounting (Optional)
The transmitter comes with a wall mount for convenient storage and access. To install:
- Choose a suitable location on a wall.
- Secure the back holder to the wall using appropriate screws (not included, or use adhesive if provided).
- Slide the remote into the mounted holder.
Figure 3: Remote with wall mount, showing installation.
3. Pairing with Motorized Blinds
Before use, the transmitter must be paired with your motorized roller shades/blinds. This remote is specifically designed for Rollerhouses motors. For other brands, please refer to the compatibility section.
- Ensure your motorized blind is powered on.
- Locate the "PROG" button on your blind's motor. Press and hold it briefly.
- Immediately after, press the "UP" button on your AC114 remote.
- The blind motor will shake slightly, indicating successful pairing.
Note: Each channel on a multi-channel remote needs to be paired individually if you wish to control different groups of blinds. A single-channel remote controls one group of blinds.
Operating Instructions
Remote Control Layout
Figure 4: Button layout and battery compartment of the remote.
Button Functions
- Up (Open) Button: Moves the blinds upwards to open them.
- Down (Close) Button: Moves the blinds downwards to close them.
- Pause/Stop Button: Stops the blinds at their current position.
- Channel Switch (Left/Right Flip) Buttons: On multi-channel remotes, these buttons allow you to cycle through the available channels to select which group of blinds you wish to control. The selected channel is displayed on the screen.
- Channel Display: Shows the currently selected channel number.
Figure 5: Visualizing 1-channel vs. 6-channel control.
Control Range
The AC114 transmitter operates on a 433.92 MHz RF frequency, providing a strong signal that can work through walls and obstacles. The effective control range is up to 120 feet indoors, allowing you to operate your blinds from a considerable distance within your home.
Figure 6: Remote control from a long distance.
Maintenance
Battery Replacement
The built-in replaceable batteries typically last about two years. When the remote's performance degrades or the indicator light no longer illuminates, it's time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
Cleaning
To clean the remote, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.
Troubleshooting
- Remote not responding: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
- Blinds not responding to remote: Ensure the remote is paired with the correct motor. Re-attempt the pairing process if needed. Verify that the remote is within the effective control range.
- Intermittent control: This could be due to low battery power or interference. Try replacing batteries.
- Compatibility Issues: This remote is specifically designed for Rollerhouses motors (AC123, AC114, AC127, AC141, AC140 series). It is NOT compatible with the following brands:
- Somfy brand Shade
- Graber and Bali blinds
- Sivola Triathlon Shades
- Rollease Acmeda shade motors
- Tucson DC1602b
- Levolor motorized sheer shades
- 3 day blinds
If you encounter issues not covered here, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Model | AC114 Series (AC114-01B, AC114-06B, etc.) |
| Frequency | 433.92MHz |
| Radiation Power | ≤10mW |
| Working Temperature | -10°C ~ +50°C |
| Dimensions | 4.84" x 1.77" x 0.6" (12.3cm x 4.5cm x 1.5cm) |
| Battery Type | AAA x 2 (3V) |
| Transmission Current | ≤18mA |
| RF Modulation Method | ASK |
| Voltage (for compatible motors) | 110-240V |
| Wattage (for compatible motors) | 1W |
Figure 7: Product dimensions and specifications.
Figure 8: AC114-01 Single-Channel Transmitter specifications.
User Tips
- Confirm Compatibility: Due to the complex functionality and specific compatibility requirements, always double-check that the AC114 series transmitter is compatible with your existing motorized blinds system before purchase. If unsure, consult with the seller.
- Multi-Channel Advantage: If you have multiple motorized blinds, consider a multi-channel transmitter (e.g., 6-channel or 16-channel) to control different groups of blinds independently or simultaneously.
- Smart Home Integration: While this remote is a standalone RF controller, some users may seek smart home integration. Check if your motorized blinds system or a compatible smart home hub offers a bridge or gateway to integrate RF 433.92MHz devices with platforms like Alexa or Google Home.
- Battery Life: To maximize battery life, avoid unnecessary button presses and ensure the remote is stored in a cool, dry place.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
