soundcore Rave 3 Portable Bluetooth Speaker User Guide

Upon successful pairing, a sound prompt will confirm the connection.
Double press the AuraCast button on either speaker to assign the left and right audio channels.

AI Vocal Removal

To use the AI Vocal Removal feature:

Press the AI VOCAL REMOVAL button on the speaker to remove vocals from a song.
Adjust the vocal removal level using the wireless microphone’s AI Vocal Removal button (ranging from 0% to 100%).

Wireless Microphone Setup

For initial use of the wireless microphone:

Open the battery cover and insert two AA batteries.
Turn on the wireless microphone, it will automatically connect to the speaker.

You can adjust the microphone volume and vocal removal level using the physical buttons on the microphone.

Light Effects Control

The speaker offers various light effects including Flame, Color Flow, Lightning, and Bou Audio Light. Use the soundcore App for more control over the lighting effects.

Button Function

Press the “AI VOCAL REMOVAL” button to mute or unmute the original vocal in the song.

Connectivity

Bluetooth connectivity

Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Rave 3” from the Bluetooth list to connect.

TWS Connectivity

With one speaker connected to a smartphone, press the AuraCast button simultaneously on both speakers to enter TWS pairing mode.
Upon successful pairing, you will hear a sound prompt. Then double press the AuraCast button on either speaker to assign the left and right audio channels.

Using Instructions

With one speaker connected to a smartphone, press the AuraCast button on up to 100 soundcore speakers with AuraCast function to synchronize audio and light.

Press the Lightshow button to turn on or off the light effect. You can also select your preferred light effect, or customize its pattern and brightness in the soundcore app.

The current UI images are for illustrative purposes only. Actual display content may vary depending on the software version.

APPS

Experience Accompaniment, Vocal Modification, Stage Reverberation and more advanced karaoke features in soundcore app.

The current UI images are for illustrative purposes only. Actual display content may vary depending on the software version.

Plugins

Connect a microphone or guitar to the speaker through 6.5mm audio cables (not suppplied).

After connecting a microphone or guitar to the speaker, make sure to set the toggle switch to the correct sound input.

Mic Instructions

2sOFFONx1For first-time use of the wireless microphone, unscrew battery cover and install two AA batteries. Once you power on the wireless microphone, it will automatically connect to the speaker. Through the physical buttons on the microphone, you can adjust its volume and the level of the original vocals being removed in karaoke.

The AI VOCAL REMOVAL button on the speaker can remove the original vocal from a song with just one press. While the AI Vocal Removal button on the wireless microphone allows for adjustable vocal removal, ranging from 0% to 100%.
Once the vocal removal level is set on the microphone, the speaker will remember this setting even after restarting. This ensures that when you activate the vocal removal feature on the speaker, the vocal removal effect will match the level set on the microphone.

Charging

Connect the speaker to the power source with a C-C cable.

Download App

Specification

Name of the Speaker: soundcore Rave 3
Name of the Microphone: soundcore Party Wireless Microphone
Speaker Model: A31A3

Microphone Model: A3326
Input: 5V = 3A (Speaker)
Rating: 3V = 110mA (powered by 2 AA batteries) (Microphone)

Charging Time: 6 Hours
Playtime (varies by volume level and playback content): Up to 12 Hours
FCC ID: 2AOKB-A31A3 (Speaker)

FCC ID: 2AOKB-A3326 (Microphone)
IC: 23451-A31A3 (Speaker) IC: 23451-A3326 (Microphone)

Disclaimer

Before using this product, users are required to fully read and understand the terms herein.

This product is designated exclusively for lawful personal use by the purchasing user. Users shall maintain strict adherence to prevailing applicable laws and regulations and are responsible for ensuring their usage does not violate any third party’s intellectual property rights or any other legal rights, including but not limited to securing appropriate licenses or authorizations for any audio or other copyright-protected materials used, or securing appropriate licenses or authorizations for the sharing, publication, or other distribution of any such copyright-pro-tected materials.

The company disclaims liability for any damages or third-party claims arising from the misuse of this product or breach of these terms. Users are solely responsible for all resulting liabilities, including legal costs and damages. Continued use of this product indicates the user’s express acceptance of and agreement to these terms.

Warranty

18-month limited warranty
www.ankerjapan.com
service@soundcore.com

support.mea@soundcore.com (For Middle East and Africa Only)
support@anker.com
+1 (800) 988 7973 (US/Canada)

+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
03 4455 7823 (日本)

+86 400 0550 036 (中国)
+82 02-1661-9246 (한국)
+971 529750842 (Middle East & Africa)

+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)

+20 8000000826 (Egypt)

GermanyThe Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited (or Anker Technology Co., Limited) is under license. Other trademarks and trade names are those of their respective owners.

Important Safety Information

Operating temperature should be between 0°C to 40°C/32°F to 104°F.
The product contains a battery pack, so it should not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Notice

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU and amendment (EU) 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://support.soundcore.com/s/articleRecommend?type=DownLoad&secondType=doc

Maximum output power of Speaker: 13.42dBm Maximum output power of Microphone: 6.93dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)

High or low extreme temperatures that a battery can be subjected to during use, storage or transportation:

During use: maximum 40℃ (104°F)
Storage: -20 – 45℃ (-4 – 113°F)
Transportation: 5 – 35℃ (41 – 95°F)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Company Name: Fantasia Trading LLC

Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764

Telephone: +1 (800) 988 7973

FCC RF Exposure Warning Statements for Speaker:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003 (B) / NMB-003 (B)
This Class B digital apparatus complies with Canadian ICES-003.

IC Radio Frequency Exposure Statement for Speaker:
This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

More Info

USER GUIDE

soundcore.com/support

@soundcoreaudio

FAQ

Q: How can I access TWS pairing mode on the soundcore Rave 3?
- A: To enter TWS pairing mode, connect one speaker to a smartphone, then press the AuraCast button simultaneously on both speakers. Upon successful pairing, assign left and right channels by double pressing the AuraCast button on either speaker.

Q: How do I adjust the vocal removal level using the wireless microphone?
- A: Press the AI Vocal Removal button on the wireless microphone to adjust the vocal removal level, ranging from 0% to 100%.
Q: How can I control the light effects on the soundcore Rave 3?
- A: The speaker offers various light effects like Flame, Color Flow, Lightning, and Bou Audio Light. For more control over lighting effects, use the soundcore App.

Documents / Resources

soundcore Rave 3 Portable Bluetooth Speaker [pdf] User Guide
A31A3, 51005004956 V01, Rave 3 Portable Bluetooth Speaker, Rave 3, Portable Bluetooth Speaker, Bluetooth Speaker, Speaker

References

User Manual

soundcore Rave 3 Portable Bluetooth Speaker

Product Usage Instructions