IC-NTG4.5 Camera Integration System
Specifications:
- Product Name: Camera Integration System for Mercedes-Benz
vehicles with NTG4.5 system - Manufacturer: IC-NTG4.5
- Address: 1080 Holland Drive, Boca Raton, FL 33487
- Contact: 929-220-1212
Product Usage Instructions:
Kit Components:
- IC-NTG4.5 Interface
- LVDS IN Cable
Interface Ports:
- Main Power T-Harness
- LVDS OUT
- LVDS IN
- Main Power INPUT
DIP Switch Settings:
DIP | ON | OFF |
---|---|---|
1 2 | SEE OTHER CHART | |
3 | 4 DISABLE PDC ENABLE PDC | |
5 | DISABLE ENABLE | |
6 | ENABLE DVR Input DISABLE DVR Input | |
7 | FRONT CAM Disable front shows (10 sec) after REV | |
8 | — |
Guidelines:
- DIP SWITCHES affect resolution (screen size), CAN type (vehicle
type), and OE vs. aftermarket camera. - Press and HOLD HANG UP to force ‘DVR VIDEO’ at any time
(outside of reverse). - If the user wants timed front AND forced front at any time, see
diagram on page 3, must use RCA Y-Adapter (not included).
FAQ:
How many additional composite video inputs does the IC-NTG4.5
add to the factory screen?
The IC-NTG4.5 adds up to 3 additional composite video inputs to
the factory screen in Mercedes vehicles equipped with the NTG4.5
system.
To force one camera on at any time using a steering wheel
button, press and hold HANG UP.
What are the key features of the IC-NTG4.5 system?
The key features of the IC-NTG4.5 system include adding up to 3
additional composite video inputs, enabling the user to force one
camera on at any time using a steering wheel button, and
compatibility with Mercedes vehicles equipped with the NTG4.5
system.
Camera Integration System for Mercedes-Benz vehicles equipped with the NTG4.5 system
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
The IC-NTG4.5 adds up to 3 additional composite video inputs to the factory screen in Mercedes vehicles equipped with the NTG4.5 system, with the added ability to force one camera on at any time using a steering wheel button.
KIT COMPONENTS
IC-NTG4.5 Interface
LVDS IN Cable
INTERFACE PORTS
Main Power T-Harness
LVDS OUT
LVDS IN
Main Power INPUT
NOT USED
Reset unit after adjusting switches!
DIP SWITCH SETTINGS
DIP
ON
OFF
1 2
Car Model/Screen Size
SEE OTHER CHART
3
4 DISABLE PDC ENABLE PDC
5
DISABLE
ENABLE
Guidelines
Guidelines
6 ENABLE DVR Input DISABLE DVR Input
7 FRONT CAM Disable front
shows (10 sec) after REV
8
—
—
Model / Screen
1
2
2010-2014 5.8″ A,B,C,GLA,GLK,GLS OFF OFF
2010-2014 ML 7″ screen
ON OFF
10-14 E-Class, C-Class 7″ screen OFF ON
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
3 OFF OFF OFF
2|Page
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
3|Page
Once installation is complete and all dip-switches are set properly and camera is powered and connected, reverse image should display automatically while in reverse (unless manual transmission in this case, power Orange trigger wire with reverse gear).
– DIP SWITCHES affect resolution (screen size), CAN type (vehicle type) and OE vs aftermarket camera.
– Press and HOLD HANG UP to force `DVR VIDEO’ at any time (outside of reverse). – If user wants timed front AND forced front at any time, see diagram on page 3, must use RCA Y-
Adapter (not included)
Hold Hang Up to force video input
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
4|Page
1080 Holland Drive, Boca Raton, FL 33487 | 929-220-1212
5|Page
Documents / Resources
![]() |
ZZ 2 IC-NTG4.5 Camera Integration System [pdf] User Guide ZZ-2, IC-NTG4.5, IC-NTG4.5 Camera Integration System, IC-NTG4.5, Camera Integration System, Integration System, System |