ZYXEL-logo

ZYXEL PX3321-T1 WiFi 6 Gpon Volp Gateway ONT with 1 Port USB

ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-product

Package Contents 

ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (1)

Quick Start Guide 

Step 1 Hardware Installation 

Warning! To avoid possible eye injury, do NOT look into an operating fiber module’s connector.

  1. Connect the fiber optic cable from your service provider’s network to the PON port.
  2. Carefully coil the fiber optic cable from inside to outside. Make sure the cable goes under the tabs to keep it in place. Do not exceed 2.5 meters of fiber optic cable with an outer diameter of 3.0 mm.
  3. Connect the power cable to the PX3321-T1 and press the power button.
  4. Connect a computer to the LAN port using the yellow Ethernet cable.
  5. Connect a phone to the PHONE port using the phone cableZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (3) ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (4)

LEDs

ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (5)ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- 11

Step 2 WiFi Connection 

Using SSIDZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (6)

  1. The SSID and wireless key are on the device label.
  2. On your smartphone or notebook, find this SSID. Enter the wireless key to connect.

Using WPS 

  1. Press the WPS button until the WiFi 5GHz/WPS and 2.4GHz/WPS LEDs light up in amber.
  2. Press the WPS button on the wireless client. If the WPS method fails, use the SSID and wireless key to set up a WiFi connection.ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (7) ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (8) ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- 12

Step 3 Quick Start Setup 

Open a web browser and go to http://192.168.1.1. Enter the default User Name (admin) and admin login password (on the device label), and then click Login. A wizard runs. Follow the wizard prompts to complete the setup.
ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (9)

Wall Mounting (Optional) 

  1. Drill two holes in the wall at a distance of 138.8 mm. Insert the screw anchors and screws (not provided).
  2. Place the PX3321-T1 so the wall mount holes line up with the screws (2-a). Slide the PX3321-T1 down gently to fix it into place (2-b).ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (10)

Support Information 

https://service-provider.zyxel.com/global/en/tech-support

ZYXEL-PX3321-T1-WiFi-6-Gpon-Volp-Gateway-ONT-with-1-Port-USB-fig- (2)

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.

EU Importer
Zyxel Communicotions A/S Gladsaxevej 378, 2. th. 2860 S0borg, Denmark  https://www.zyxel.com/dk/da

US Importer
Zyxel Communications, Inc. 1130 North Miller Street Anaheim, CA 92806-2001  https://www.zyxel.com/us/en

Copyright© 2023 Zyxel and/or its affiliates. All Rights Reserved.

Documents / Resources

ZYXEL PX3321-T1 WiFi 6 Gpon Volp Gateway ONT with 1 Port USB [pdf] User Guide
PX3321-T1, PX3321-T1 WiFi 6 Gpon Volp Gateway ONT with 1 Port USB, WiFi 6 Gpon Volp Gateway ONT with 1 Port USB, 6 Gpon Volp Gateway ONT with 1 Port USB, Volp Gateway ONT with 1 Port USB, Gateway ONT with 1 Port USB, 1 Port USB

References

Leave a comment

Your email address will not be published. Required fields are marked *