Imodemu ye-WM-E2S

UKUXHUMANA

1. Indawo ebiyelwe ngepulasitiki kanye nekhava yayo ephezulu
2. I-PCB (i-mainboard)
3. Amaphoyinti okuqinisa (ama-fixation lags)
4. Indlebe yesibambi sekhava (ikhululekile ukuvula ikhava ephezulu)
5. Isixhumi se-antenna ye-FME (50 Ohm) – ngokuzikhethela: Isixhumi se-antenna ye-SMA
6. Ama-LED wesimo: ukusuka phezulu kuye phansi: I-LED3 (eluhlaza okotshani), i-LED1 (eluhlaza okwesibhakabhaka), i-LED2 (ebomvu)
7. Ihinge lekhava
8. Isibambi sekhadi le-SIM elincane (lidonsele kwesokudla bese uyivula)
9. Isixhumi se-antenna yangaphakathi (U.FL – FME)
10. Isixhumi se-RJ45 (uxhumano lwedatha namandla kagesi e-DC)
11. I-Jumper crossboard (ngokukhethwa kwemodi ye-RS232/RS485 enama-jumper)
12. Ama-Super-capacitors
13. Isixhumi sangaphandle

UKUNIKEZELWA KWAMANDLA KANYE NEZIMBANDLA

• Ukunikezwa kwamandla: 8-12V DC (10V DC nominal), Okwamanje: 120mA (Itron® ACE 6000), 200mA (Itron® SL7000), Ukusetshenziswa: max. 2W @ 10V DC
• Okokufaka kwamandla: kungahlinzekwa imitha, ngesixhumi se-RJ45
• Ukuxhumana okungenantambo: ngokuya ngemojula ekhethiwe (izinketho ze-oda)
• Amachweba: RJ45 uxhumano: RS232 (300/1200/2400/4800/9600 baud) / RS485
• Izinga lokushisa lokusebenza: -30 ° C * kuya +60 ° C, rel. 0-95% rel. umswakama (*TLS: kusuka -25°C) / Izinga lokushisa lesitoreji: kusuka ku -30°C kuya ku-+85°C, rel. 0-95% rel. umswakama
  *uma i-TLS: -20°C

IDATHA YOMCHWEPHESHE / UKUDIZINI

• Ubukhulu: 108 x 88 x 30mm, Isisindo: 73 gr
• Impahla: Imodemu inezindlu zepulasitiki ezisobala, ezivikelwe i-IP21, ezilwa nokuvuvukala, ezingaqhubeki. Indawo ebiyelwe ingaboshelwa izindlebe zokulungisa ngaphansi kwesembozo setheminali yemitha.
• Ukulungiswa kwe-DIN-rail ongakukhetha kunga-odwa (iyunithi ye-adaptha yokubopha ihlanganiswe ngemuva kwendawo ebiyelwe ngezikulufo) ngakho-ke ingasetshenziswa njengemodemu yangaphandle.

IZINYATHELO ZOKUFAKA

• Isinyathelo #1: Susa ikhava yetheminali yemitha ngezikulufo zayo (nge-screwdriver).
• Isinyathelo #2: Qinisekisa ukuthi imodemu AYIKHO ngaphansi kwamandla kagesi, susa uxhumano lwe-RJ45 kumitha. (Umthombo wamandla uzosuswa.)
• Isinyathelo #4: Manje i-PCB izobekwa kwesokunxele njengoba ingabonakala esithombeni. Phusha ikhava yesibambi se-SIM yepulasitiki (8) ukusuka kwesokunxele uye kwesokudla, bese uyivula.
• Isinyathelo #5: Faka i-SIM khadi esebenzayo kusibambi (8). Nakekela ukuma kwesokudla (i-chip ibheka phansi, unqenqema lwekhadi olusikiwe lubheke ngaphandle othini. Phusha iSIM kumzila wesitimela, vala isibambi seSIM, bese uyiphushela emuva (8) ukusuka kwesokudla uye kwesokunxele, bese uvala. emuva.
• Isinyathelo #6: Qinisekisa ukuthi intambo emnyama yangaphakathi yothi ixhunywe kusixhumi se-U.FL (9)!
• Isinyathelo #7: Vala emuva ikhava yangaphezulu yendawo ebiyelwe (1) ngezindlebe zokubopha (4). Uzozwa umsindo wokuchofoza.
• Isinyathelo #8: Khipha uthi kusixhumi sothi lwe-FME (5). (Uma usebenzisa uthi lwe-SMA, sebenzisa isiguquli se-SMA-FME).
• Isinyathelo #9: Xhuma imodemu kukhompyutha ngekhebula le-RJ45 kanye nesiguquli se-RJ45-USB, bese usetha indawo ye-jumper kumodi ye-RS232. (imodemu ingalungiselelwa kuphela kumodi ye-RS232 ngekhebula!)
• Isinyathelo #10: Lungiselela imodemu ngesofthiwe ye-WM-E Term®.
• Isinyathelo #11: Ngemva kokucushwa kokusetha ama-jumper (11) futhi, vala amapheya e-jumper adingekayo (amacebo angatholakala ku-jumper crossboard) - Imodi ye-RS232: ama-jumpers angaphakathi avaliwe / Imodi ye-RS485: izikhonkwane ze-winger zivaliwe abagxumagxuma.
• Isinyathelo #12: Xhuma ikhebula le-RJ45 ubuyele kumitha. (Uma imodemu izosetshenziswa ngembobo ye-RS485, kuzomele uguqule ama-jumpers abe yimodi ye-RS485!)
• Isinyathelo #13: Imodemu→Uxhumo lwemitha ye-Itron® lungaqalwa ngembobo engu-RS232 noma engu-RS485. Ngakho-ke xhuma intambo empunga ye-RJ45 (14) embotsheni ye-RJ45 (10).
• Isinyathelo #14: Olunye uhlangothi lwekhebula le-RJ45 kufanele luxhunywe kusixhumi semitha i-RJ45 ngokohlobo lwemitha, kanye nembobo yokufunda (RS232 noma RS485). Imodemu izonikwa amandla imitha ngokushesha futhi ukusebenza kwayo kuzoqalwa – okungahlolwa ngama-LED.

IZIMPAWU ZOKUSEBENZA ZE-LED – UMA INGASHAJA
Qaphela! Imodemu kufanele ishajwe ngaphambi kokusetshenziswa kokuqala - noma uma ibikade inganikiwe amandla isikhathi eside. Ukushaja kuthatha cishe amaminithi angu-2 uma i-supercapacitor iphelile / ikhishiwe.

I-LED		Inganekwane	Sayina
		Ekumisweni kokuqala, ngesikhathi sokushajwa kwama-supercapacitor akhathele, kuphela eluhlaza I-LED izokhanya ngokushesha. Yile LED kuphela esebenzayo ngesikhathi sokushaja. Linda kuze kube yilapho idivayisi izoshajwa ngokugcwele.	●
I-LED3

Ngokuzenzakalelayo kwefekthri, ukusebenza nokulandelana kwezimpawu ze-LED kungashintshwa ithuluzi lokumisa le-WM-E Term®, eqenjini lepharamitha Yezilungiselelo Zemitha Ejwayelekile. Okukhululekile ukukhetha okunye okukhethwa kukho kwe-LED kungatholakala kuManuwali Yokufaka yemodemu ye-WM-E2S®.
IZIMPAWU ZOKUSEBENZA ZE-LED – EMVA KOKUSEBENZA OKUJWAYELEKILE

I-LED	Imicimbi
I-LED3 I-SIM isimo / I-SIM ukwehluleka or I-PIN ikhodi ukwehluleka	Ukukhanyisa okuqhubekayo, kuze kube yilapho idivayisi ingekho kunethiwekhi yeselula futhi i-RSSI ingatholakali (i-SIM ilungile) Lapho i- I-SIM I-PIN is kulungile: i-led esebenzayo Uma ekhona cha I-SIM kutholiwe noma I-SIM I-PIN is okungalungile: ecwayiza kanye nge okwesibili (ukukhanya kancane) Inani le-RSSI (amandla esignali) lisayinwe futhi yile LED. Ukukhanyisa ngo-“N”-izikhathi njalo ngemizuzwana eyi-10-15, kuye ngesikhathi sokuvuselela se-RSSI. Inani le-RSSI lingaba ngu-1,2,3 noma 4 kunethiwekhi yeselula yamanje. Izinombolo zokukhanyisa kwe-RSSI zihlukile kubo bonke ubuchwepheshe benethiwekhi, ngokuya ngokulandelayo: on 2G: 1 ukucwayiza: RSSI >= -98 / 2 ukubaneka: RSSI phakathi -97 kanye -91 / 3 ukubaneka: RSSI -90 kuya -65 / 4 ukubaneka: RSSI > -64 on 3G: 1 ukubaneka: RSSI >= -103 / 2 ukubaneka: RSSI phakathi -102 kanye -92 / 3 ukubaneka: RSSI -91 kuya -65 / 4 ukubaneka: RSSI > -64 on 4G I-LTE: 1 ukubaneka: RSSI >= -122 / 2 ukubaneka: RSSI phakathi -121 kuya -107 / 3 ukubaneka: RSSI -106 kuya -85 / 4 ukubaneka: RSSI > -84 on I-LTE Ikati.M1: 1 ukubaneka: RSSI >= -126 / 2 ukubaneka: RSSI phakathi -125 kanye -116 / 3 ukubaneka: RSSI -115 kuya -85 / 4 ukubaneka: RSSI > -84 on I-LTE Ikati. I-NB-IoT (Narrow Ibhendi): 1 ukubaneka: RSSI >= -122 / 2 ukubaneka: RSSI -121 kuya -107 / 3 ukubaneka: RSSI phakathi -106 kanye -85 / 4 ukubaneka: RSSI > -84
I-LED1 I-GSM / GPRS isimo	Ngesikhathi sokubhaliswa kwenethiwekhi: i-led iyasebenza Ngesikhathi sokusesha inethiwekhi: ukucwayiza kanye ngesekhondi Uma uxhumeke kunethiwekhi nokuxhumana kwe-IP kulungile: ukucwayiza kabili ngomzuzwana Lapho ubuchwepheshe bokufinyelela kwenethiwekhi yeselula bushintshwa: ukukhanya okusheshayo kuzothenjwa: 2G 2 ekhanyayo ngomzuzwana / 3G 3 ekhanyayo ngomzuzwana / 4G 4 ekhanyayo ngomzuzwana Uma ingekho inethiwekhi yeselula etholakalayo: i-led izobe ingenalutho Ngesikhathi socingo lwe-CSD kanye nokudluliselwa kwedatha ye-IP, i-LED ikhanya ngokuqhubekayo
I-LED2 Isimo semitha ye-E	Ngokujwayelekile: i-led ayisebenzi Ngesikhathi sokuxhumana: i-led iyasebenza (i-flashing)

Qaphela ukuthi ngesikhathi sokulayisha i-firmware ama-LED asebenza njengokujwayelekile - asikho isignali ye-LED ebalulekile yenqubekelaphambili yokuvuselela i-FW. Ngemva kokufakwa kwe-Firmware, ama-LED angu-3 azobe ekhanya imizuzwana emi-5 futhi wonke azobe engenalutho, bese imodemu iqala kabusha nge-firmware entsha. Khona-ke wonke amasignali e-LED azobe esebenza njengoba ebhalwe ngenhla.

UKUMISELWA KWEMODEMU
Imodemu ingacushwa nge-software ye-WM-E Term® ngokusetha amapharamitha ayo. Lokhu kufanele kwenziwe ngaphambi kokusebenza nokusetshenziswa.

• Ngesikhathi senqubo yokumisa, isixhumi se-RJ45 (5) kufanele sikhishwe kusixhumi semitha futhi kufanele sixhunywe ku-PC. Ngesikhathi soxhumano lwe-PC idatha yemitha ayikwazi ukutholwa yimodemu.
• Xhuma imodemu kukhompyutha ngekhebula le-RJ45 kanye nesiguquli se-RJ45-USB. Abagxumayo kufanele babe sesimweni sika-RS232!
  Okubalulekile! Ngesikhathi sokucushwa, ukunikezwa kwamandla kwemodemu kuqinisekiswa yileli bhodi lokuguqula, ekuxhumekeni kwe-USB. Amanye amakhompyutha angazwela izinguquko zamanje ze-USB. Kulokhu kufanele usebenzise ukunikezwa kwamandla kwangaphandle ngokuxhumeka okukhethekile.
• Ngemva kokucushwa xhuma kabusha ikhebula le-RJ45 kumitha!
• Ukuze uthole uxhumano lwekhebula le-serial lungiselela izilungiselelo zembobo ye-COM yekhompyutha exhunyiwe ngokuya nge-modem serial port properties ku-Windows ku-Start menu / Control panel / Isiphathi Sedivayisi / Amachweba (COM ne-LTP) ku-Properties: Bit/sec: 9600 , Izingcezu zedatha: 8, Ukulingana: Akukho, Izingcezu zokumisa: 1, Ibhendi enokulawula: Cha
• Ukulungiselelwa kungenziwa ngekholi ye-CSData noma uxhumano lwe-TCP uma i-APN isivele imisiwe.

UKULUNGISWA KWEMODEMU NGE-WM-E TERM®
I-Microsoft .NET framework runtime environment iyadingeka kukhompuyutha yakho. Ngokucushwa kwemodemu nokuhlola uzodinga i-APN/iphakheji yedatha evuliwe, i-SIM khadi esebenzayo.
Ukucupha kungenzeka ngaphandle kwe-SIM khadi, kodwa kulokhu imodemu isebenza iqale kabusha ngezikhathi ezithile, futhi ezinye izici zemodemu ngeke zitholakale kuze kufakwe i-SIM khadi (isb. ukufinyelela ukude).

Ukuxhuma kwimodemu (ngembobo ye-RS232*)

• Isinyathelo #1: Landa ifayela le- https://www.m2mserver.com/m2m-downloads/WM-ETerm_v1_3_63.zip file. Susa ukucindezela bese uqala ifayela le-wm-eterm.exe file.
• Isinyathelo #2: Cindezela inkinobho yokungena bese ukhetha idivayisi ye-WM-E2S ngokuthi Khetha.
• Isinyathelo #3: Kwesokunxele esikrinini, kuthebhu yohlobo lwe-Connection, khetha ithebhu ye-Serial, bese ugcwalisa inkambu yokuxhuma okusha (uhlelo olusha lokuxhumafile name) bese ucindezela inkinobho ethi Dala.
• Isinyathelo #4: Khetha imbobo ye-COM efanele bese umisa isivinini sokudlulisa Idatha sibe yi-9600 baud (ku-Windows® kufanele ulungiselele isivinini esifanayo). Inani lefomethi Yedatha kufanele libe ngu-8,N,1. Cindezela inkinobho ethi Londoloza ukuze wenze uxhumano oluyingcwetifile.
• Isinyathelo #5: ngezansi kwesokunxele kwesikrini khetha uhlobo lokuxhuma (serial).
• Isinyathelo #6: Khetha isithonjana solwazi lwedivayisi kumenyu bese uhlola inani le-RSSI, ukuthi amandla esiginali anele nokuthi indawo ye-antenna ilungile noma cha.
  (Inkomba kufanele okungenani ibe phuzi (isignali emaphakathi) noma ibe luhlaza (ikhwalithi yesignali enhle). Uma unamanani abuthaka, shintsha indawo ye-antenna kuyilapho ungeke uthole inani elingcono le-dBm. (kufanele ucele isimo futhi ngesithonjana ).
• Isinyathelo #7: Khetha isithonjana sokufunda Ipharamitha ngoxhumo lwemodemu. Imodemu izoxhunywa futhi amanani ayo epharamitha, izihlonzi zizofundwa. *Uma usebenzisa ucingo lwedatha (CSD) noma uxhumano lwe-TCP/IP ukude ngemodemu– hlola imanuwali yokufaka ukuze uthole imingcele yokuxhuma!

Ukucushwa kwepharamitha

• Isinyathelo #1: Landa Itemu le-WM-E sample ukumisa file, ngokohlobo lwemitha ye-Iron. Khetha i- File / Layisha imenyu ukuze ulayishe file.
• Imodi ye-RS232 noma RS485: https://m2mserver.com/m2m-downloads/WM-E2S-STD-DEFAULT-CONFIG.zip
• Isinyathelo #2: Eqenjini Lepharamitha khetha iqembu le-APN, bese ucindezela inkinobho ethi Hlela amanani. Chaza iseva ye-APN futhi uma kudingekile izinkambu zegama lomsebenzisi le-APN nephasiwedi ye-APN, bese ucindezela inkinobho ethi KULUNGILE.
• Isinyathelo #3: Khetha iqembu lepharamitha le-M2M, bese ucindezela inkinobho ethi Hlela amanani. Engeza inombolo ye-PORT kunkambu yembobo yokufunda imitha e-Transparent (IEC) - ezosetshenziselwa ukufunda imitha ekude. Nikeza ukucushwa kwe-PORT NUMBER kokuthi Ukucushwa kanye nembobo yokulanda ye-firmware.
• Isinyathelo #4: Uma i-SIM isebenzisa i-PIN ye-SIM, kuzomele uyichaze eqenjini lepharamitha yenethiwekhi Yeselula, futhi uyinikeze kunkambu ye-PIN ye-SIM. Lapha ungakhetha ubuchwepheshe beselula (isb. Bonke ubuchwepheshe benethiwekhi obutholakalayo - okutuswa ukuba bukhethwe) noma khetha i-LTE ukuya ku-2G (i-fallback) yoxhumano lwenethiwekhi. Ungaphinda ukhethe u-opharetha weselula kanye nenethiwekhi– njenge-othomathikhi noma imanyuwali. Bese ucindezela inkinobho ethi KULUNGILE.
• Isinyathelo #5: Imbobo ye-serial ye-RS232 nezilungiselelo ezibonisa ngale zingatholakala ku-Trans. / Iqembu lepharamitha ye-NTA. Izilungiselelo ezizenzakalelayo yilezi ezilandelayo: kumodi ye-Multi Utility: Imodi ye-transzparent, Isilinganiso se-Meter port baud: 9600, Ifomethi yedatha: Fixed 8N1). Bese ucindezela inkinobho ethi KULUNGILE.
• Isinyathelo #6: Izilungiselelo ze-RS485 zingenziwa eqenjini lepharamitha ye-RS485 yamamitha. Imodi ye-RS485 ingasethwa lapha. Uma usebenzisa imbobo ye-RS232 kuzomele ukhubaze le nketho kuzilungiselelo! Bese ucindezela inkinobho ethi KULUNGILE.
• Isinyathelo #7: Ngemva kwezilungiselelo kufanele ukhethe isithonjana sokubhala Ipharamitha ukuze uthumele izilungiselelo kumodemu. Ungabona ukuqhubeka kokulayisha kubha yokuqhubeka yesimo esingezansi. Ekupheleni kwenqubekelaphambili imodemu izoqalwa kabusha futhi izobe iqala ngezilungiselelo ezintsha.
• Isinyathelo #8: Uma ufuna ukusebenzisa imodemu ku-RS485 port ukufunda imitha, ngakho-ke ngemva kokumisa, shintsha ama-jumpers abe yimodi ye-RS485!

Ezinye izinketho zokusetha

• Ukuphathwa kwemodemu kungacwengwa eqenjini lepharamitha ye-Watchdog.
• Amapharamitha amisiwe kufanele alondolozwe kukhompyutha yakho futhi File/Gcina imenyu.
• Ukuthuthukiswa kwe-Firmware: khetha imenyu Yamadivayisi, kanye nento yokulayisha i-Single Firmware (lapho ungalayisha khona isandiso esifanele.Isandiso se-DWL file). Ngemva kokuqhubeka kokulayisha, imodemu izobe iqalisa kabusha futhi isebenza nge-firmware entsha kanye nezilungiselelo zangaphambilini!

UKUSEKELA
Umkhiqizo unophawu lwe-CE ngokuya ngemithetho yaseYurophu.
Imibhalo yomkhiqizo, isoftware ingatholakala kumkhiqizo webindawo: https://www.m2mserver.com/en/product/wm-e2s/

Amadokhumenti / Izinsiza

Imodemu ye-WM-E2S [pdf] Umhlahlandlela Womsebenzisi Imodemu ye-WM-E2S, i-WM-E2S, iModemu, i-ACE6000, i-ACE8000, i-SL7000, amamitha kagesi

Izithenjwa

• Imaniwali yosebenzisayo