Modem ea WM-E2S

KHOPOTSO

1. Sekoahelo sa polasetiki le sekoahelo sa eona se ka holimo
2. PCB (mainboard)
3. Lintlha tsa fastener (li-lags tsa ho lokisa)
4. Tsebe ea sekoahelo (e hlephileng ho bula sekoahelo se ka holimo)
5. Sehokelo sa antenna sa FME (50 Ohm) – ka boikgethelo: Sehokelo sa manakana a SMA
6. Maemo a LED: ho tloha holimo ho ea tlase: LED3 (e tala), LED1 (e putsoa), LED2 (e khubelu)
7. Hinge e kwahelang
8. Sets'oants'o sa SIM-card e nyane (e hulele ka ho le letona ebe u bula)
9. Sehokelo sa antenna sa ka hare (U.FL – FME)
10. Sehokelo sa RJ45 (khokahanyo ea data le phepelo ea motlakase ea DC)
11. Jumper crossboard (bakeng sa khetho ea mokhoa oa RS232/RS485 ka li-jumpers)
12. Super-capacitors
13. Sehokedi sa kantle

KABELO EA MATLA LE MAEMO A TIKOLOHO

• Matla a matla: 8-12V DC (10V DC nominal), Hona joale: 120mA (Itron® ACE 6000), 200mA (Itron® SL7000), Tšebeliso: max. 2W @ 10V DC
• Kenyelletso ea matla: e ka fanoa ke meter, ka sehokelo sa RJ45
• Puisano e se nang mohala: ho latela module e khethiloeng (likhetho tsa odara)
• Boema-kepe: khokahano ea RJ45: RS232 (300/1200/2400/4800/9600 baud) / RS485
• Mocheso oa ts'ebetso: -30 ° C * ho +60 ° C, rel. 0-95% rel. mongobo (*TLS: ho tloha -25°C) / Mocheso oa polokelo: ho tloha -30°C ho ea ho +85°C, rel. 0-95% rel. mongobo
  *ha e le TLS: -20°C

LINTLHA TSA MOSEBETSI / MORAO

• Litekanyo: 108 x 88 x 30mm, Boima: 73 gr
• Seaparo: Modem e na le ntlo ea polasetiki e pepeneneng, e sirelelitsoeng ea IP21, e antistatic, e sa sebetseng. Sekoahelo se ka fasoa ka litsebe tsa ho lokisa tlas'a sekoahelo sa meter.
• Ho ka laeloa ho lokisa DIN-rail (fastener adapter unit e bokelloa ka lehlakoreng le ka morao la sekoahelo ka li-screw) ka hona e ka sebelisoa e le modem ea kantle.

LIEKETSENG MOHATO

• Mohato oa #1: Tlosa sekoaelo sa mithara ka li-screw (ka screwdriver).
• Mohato oa #2: Netefatsa hore modem HA E tlas'a phepelo ea motlakase, tlosa khokahano ea RJ45 ho metara. (Mohloli oa matla o tla tlosoa.)
• Mohato oa #4: Joale PCB e tla beoa ka letsohong le letšehali kamoo e ka bonoang fotong. Sututsa sekoaelo sa polasetiki ea SIM (8) ho tloha ka letsohong le letšehali ho ea ho le letona, ebe u se bula.
• Mohato oa #5: Kenya SIM card e sebetsang ka har'a sets'oants'o (8). Ela hloko boemo bo nepahetseng (chip e sheba fatše, ntlha e sehiloeng ea karete e sheba ka ntle ho lenakana. Sutumelletsa SIM seporong se tataisang, koala sets'oants'o sa SIM, ebe u e sutumelletsa morao (8) ho tloha ho le letona ho ea ho le letšehali, 'me u koale. morao.
• Mohato oa #6: Netefatsa hore thapo e ntšo ea ka hare ea antenna e hoketsoe sehokelong sa U.FL (9)!
• Mohato oa #7: Koala sekoaelo se kaholimo sa sebaka (1) ka litsebe tse koalang (4). U tla utloa molumo oa ho tobetsa.
• Mohato oa #8: Hlomella lenakana ho sehokelo sa lenakana la FME (5). (Haeba u sebelisa eana ea SMA, joale sebelisa SMA-FME converter).
• Mohato oa #9: Hokela modem komporong ka thapo ea RJ45 le converter ea RJ45-USB, 'me u hlophise boemo ba jumper ka mokhoa oa RS232. (modem e ka hlophisoa feela ka mokhoa oa RS232 ka cable!)
• Mohato oa #10: Lokisa modem ka software ea WM-E Term®.
• Mohato oa #11: Ka mor'a hore tlhophiso e thehe li-jumpers (11) hape, koala li-jumpers tse hlokahalang (malebela a ka fumanoa holim'a jumper crossboard) - RS232 mode: li-jumpers tsa ka hare li koetsoe / RS485 mode: lipini tsa winger li koetsoe ke ba tlolang.
• Mohato oa #12: Hokela thapo ea RJ45 ho mithara. (Haeba modem e tla sebelisoa ka boema-kepe ba RS485, joale u tlameha ho fetola li-jumpers ho mokhoa oa RS485!)
• Mohato oa #13: modem→Itron® meter khokahanyo e ka qalisoa ka RS232 kapa RS485 port. Ka hona, hokela mohala oa RJ45 oa bohlooho (14) ho boema-kepe ba RJ45 (10).
• Mohato oa #14: Lehlakore le leng la thapo ea RJ45 le lokela ho hokela sehokelong sa mitha RJ45 ho latela mofuta oa mithara, le boema-kepe ba ho bala (RS232 kapa RS485). Modem e tla tsamaisoa ke mitha hang-hang 'me ts'ebetso ea eona e tla qala - e ka hlahlojoang ka li-LED.

TŠEBELETSO EA LITŠOANTŠISO TSA TŠEBELETSO EA LED - HA HO TLOHA
Ela hloko! Modem e tlameha ho tjhaja pele o e sebedisa la pele - kapa haeba e ne e se e le nako e telele e sa sebetse. Tefiso e nka metsotso e ka bang ~ 2 haeba supercapacitor e ne e khathetse / e lahliloe.

LED		Tšōmo	Letshoao
		Ha ho etsoa boemo ba pele, nakong ea ho tjhaja li-supercapacitor tse khathetseng, feela botala LED e tla benya kapele. Ke LED ena feela e sebetsang nakong ea tefiso. Emela ho fihlela sesebelisoa se tla tjhajoa ka botlalo.	●
LED3

Holim'a mefokolo ea fektheri, ts'ebetso le tatellano ea matšoao a LED li ka fetoloa ke sesebelisoa sa WM-E Term®, ho sehlopha sa paramethara ea General Meter Settings. Mahala a ho khetha likhetho tse ling tsa LED li ka fumanoa ho Buka ea ho Instola modem ea WM-E2S®.
TŠEBELETSO EA LITŠOANTŠISO TSA TŠEBELETSO EA LED - HA HO SEBELISA TLOAELEHILE

LED	Liketsahalo
LED3 SIM boemo / SIM ho hloleha or PIN khoutu ho hloleha	Ho khantša khafetsa, ho fihlela sesebelisoa se le sieo marang-rang a cellular mme RSSI e ke ke ea bonoa (SIM e lokile) Ha the SIM PIN is ho lokile: led ke mafolofolo Haeba le teng che SIM fumanoa kapa SIM PIN is phoso: ho panya hang ka ea bobeli (ho benya butle) Boleng ba RSSI (matla a matšoao) bo saennoe le ke LED ena. Ho khanya ka "N"-nako ka metsotsoana e meng le e meng e 10-15, ho latela nako ea ho khatholla ea RSSI. Boleng ba RSSI e ka ba 1,2,3 kapa 4 ho netweke ea hajoale ea cellular. Linomoro tsa RSSI flashings li fapane ho theknoloji e 'ngoe le e' ngoe ea marang-rang, ho latela tse latelang: on 2G: 1 e benyang: RSSI >= -98 / 2 flashings: RSSI pakeng tsa -97 le -91 / 3 flashings: RSSI -90 ho -65 / 4 flashings: RSSI > -64 on 3G: 1 ho benya: RSSI >= -103 / 2 flashings: RSSI pakeng tsa -102 le -92 / 3 flashings: RSSI -91 ho -65 / 4 flashings: RSSI > -64 on 4G LTE: 1 ho benya: RSSI >= -122 / 2 flashings: RSSI pakeng tsa -121 ho -107 / 3 flashings: RSSI -106 ho -85 / 4 flashings: RSSI > -84 on LTE Katse.M1: 1 ho benya: RSSI >= -126 / 2 flashings: RSSI pakeng tsa -125 le -116 / 3 flashings: RSSI -115 ho -85 / 4 flashings: RSSI > -84 on LTE Katse. NB-IoT (Narrow Sehlopha): 1 ho benya: RSSI >= -122 / 2 flashings: RSSI -121 ho -107 / 3 flashings: RSSI pakeng tsa -106 le -85 / 4 flashings: RSSI > -84
LED1 GSM / GPRS boemo	Nakong ea ngoliso ea marang-rang: tataiso e sebetsa Nakong ea ho batla marang-rang: ho panya hang ka motsotsoana Ha o hokahane le marang-rang mme khokahano ea IP e lokile: ho panya habeli ka motsotsoana Ha theknoloji ea ho fihlella marang-rang a thelefono e fetotsoe: ho tla ts'eptjoa ho khanya ka potlako: 2G 2 e khanyang ka motsotsoana / 3G 3 e khanyang ka motsotsoana / 4G 4 e khanyang ka motsotsoana Haeba ho se na marang-rang a fumanehang a cellular: led e tla be e se na letho Nakong ea mohala oa CSD le phetisetso ea data ea IP, LED e ntse e khantša khafetsa
LED2 Boemo ba E-meter	Ka kakaretso: tataiso ha e sebetse Nakong ea puisano: led e sebetsa (ho benya)

Hlokomela hore nakong ea firmware e kenyang li-LED li sebetsa joalo ka ha li tloaelehile - ha ho na lets'oao la bohlokoa la LED bakeng sa tsoelo-pele ea ho khatholla ea FW. Kamora ho kengoa ha Firmware, li-LED tse 3 li tla khantša metsotsoana ea 5 'me tsohle li tla koaloa, ebe modem e qala hape ka firmware e ncha. Ebe mats'oao ohle a LED a tla sebetsa joalo ka ha a thathamisitsoe kaholimo.

TS'ELISO MOHLOMI
Modem e ka hlophisoa ka software ea WM-E Term® ka ho seta liparamente tsa eona. Sena se tlameha ho etsoa pele ho ts'ebetso le tšebeliso.

• Nakong ea ts'ebetso ea tlhophiso, sehokelo sa RJ45 (5) se tlameha ho tlosoa ho sehokelo sa metha mme se lokela ho hokahanngoa le PC. Ka nako ya kgokelo ya PC, data ya mitha ha e kgone ho amohelwa ke modem.
• Hokela modem khomphuteng ka thapo ea RJ45 le converter ea RJ45-USB. Li-jumpers li tlameha ho ba maemong a RS232!
  Bohlokoa! Nakong ea tlhophiso, phepelo ea motlakase ea modem e tiisitsoe ke boto ena ea converter, mabapi le khokahano ea USB. Likhomphutha tse ling li khona ho utloisisa liphetoho tsa hajoale tsa USB. Tabeng ena o lokela ho sebelisa motlakase o ka ntle o nang le khokahanyo e khethehileng.
• Ka mor'a hore tlhophiso e kopanye hape mohala oa RJ45 ho meter!
• Bakeng sa khokahanyo ea serial cable, lokisa litlhophiso tsa boema-kepe ba COM ea komporo e hokahaneng ho latela thepa ea modem serial port ho Windows ho Start menu / Control panel / Motsamaisi oa Sesebelisoa / Ports (COM le LTP) ho Properties: Bit/sec: 9600 , Lintlha tsa data: 8, Parity: Ha ho letho, Emisa likotoana: 1, Sehlopha se nang le taolo: Che
• Tlhophiso e ka etsoa ka mohala oa CSData kapa khokahano ea TCP haeba APN e se e hlophisitsoe.

TLHOKOMELISO EA MODEM KA MOSEBETSI OA WM-E TERM®
Microsoft .NET framework runtime environment ea hlokahala khomphuteng ea hau. Ho lokisa modem le ho etsa diteko o tla hloka APN/sephutheloana sa data se butswe, SIM-card e sebetsang.
Ho hlophisoa hoa khoneha ntle le SIM card, empa boemong bona modem e ntse e tsoela pele ho qala bocha nako le nako, 'me likarolo tse ling tsa modem li ke ke tsa fumaneha ho fihlela SIM card e kentsoe (mohlala, phihlello e hole).

Khokahano ho modem (ka RS232 port*)

• Mohato oa #1: Khoasolla faele ea https://www.m2mserver.com/m2m-downloads/WM-ETerm_v1_3_63.zip file. Tlosa 'me u qale file ea wm-eterm.exe file.
• Mohato oa #2: Tobetsa konopo ea Kena ebe u khetha sesebelisoa sa WM-E2S ka konopo ea Khetha.
• Mohato oa #3: Ka ho le letšehali skrineng, tabeng ea mofuta oa Connection, khetha "serial tab" 'me u tlatse sebaka se secha sa khokahanyo.file name) ebe o tobetsa konopo ea Create.
• Mohato oa #4: Khetha boema-kepe bo nepahetseng ba COM 'me u lokise lebelo la phetiso ea data ho 9600 baud (ho Windows® u tlameha ho lokisa lebelo le ts'oanang). Boleng ba sebopeho sa Data e lokela ho ba 8,N,1. Tobetsa konopo ea Boloka ho etsa hore khokahano e be profile.
• Mohato oa #5: Ka tlase lehlakoreng le letšehali la skrine khetha mofuta oa khokahanyo (serial).
• Mohato oa #6: Khetha letšoao la tlhahisoleseding ea Sesebelisoa ho tsoa ho menu 'me u hlahlobe boleng ba RSSI, hore matla a pontšo a lekane le boemo ba antenna bo nepahetse kapa che.
  (Letšoao bonyane e lokela ho ba mosehla (letšoao le tloaelehileng) kapa le letala (boleng bo botle ba lets'oao). Haeba u na le boleng bo fokolang, fetola boemo ba antenna ha u ntse u ke ke ua fumana boleng bo betere ba dBm. (o tlameha ho kopa boemo hape ka lets'oao ).
• Mohato oa #7: Khetha aekhone ea ho bala ea Parameter bakeng sa khokahano ea modem. Modem e tla kopanngoa 'me litekanyetso tsa eona tsa parameter, li-identifiers li tla baloa. *Haeba u sebelisa mohala oa data (CSD) kapa khokahano ea TCP/IP u le hole le modem- sheba bukana ea Instolano bakeng sa liparamente tsa khokahano!

Sebopeho sa parameter

• Mohato oa #1: Khoasolla Nako ea WM-E sample tlhophiso file, ho latela mofuta oa mitha ea Iron. Khetha ea File / Laela menu ya ho laela file.
• Mokhoa oa RS232 kapa RS485: https://m2mserver.com/m2m-downloads/WM-E2S-STD-DEFAULT-CONFIG.zip
• Mohato oa #2: Sehlopheng sa Parameter khetha sehlopha sa APN, ebe o tobetsa konopo ea Edit values. Hlalosa seva sa APN mme ha ho hlokahala, APN Username le password tsa APN, ebe o tobetsa konopo ea OK.
• Mohato oa #3: Khetha sehlopha sa li-parameter tsa M2M, ebe o tobetsa konopo ea Edit values. Eketsa nomoro ea PORT sebakeng sa boema-kepe ba ho bala limithara tse Transparent (IEC) - e tla sebelisoa bakeng sa ho bala metara e hole. Fana ka tlhophiso PORT NUMBER ho Setsi sa Tlhophiso le ho khoasolla firmware.
• Mohato oa #4: Haeba SIM e sebelisa PIN ea SIM, joale u tlameha ho e hlalosetsa sehlopha sa "Mobile network parameter", 'me u fane ka eona tšimong ea SIM PIN. Mona o ka khetha thekenoloji ea Mobile (mohlala, theknoloji eohle e fumanehang ea marang-rang - e khothalletsoang ho e khetha) kapa khetha LTE ho ea ho 2G (fallback) bakeng sa khokahanyo ea marang-rang. U ka boela ua khetha opareitara ea selefouno le netweke– e le othomathiki kapa o sebetsa ka letsoho. Ebe o tobetsa konopo ea OK.
• Mohato oa #5: The RS232 serial port le li-setting tse pepeneneng li ka fumanoa ho Trans. / Sehlopha sa li-parameter tsa NTA. Litlhophiso tsa kamehla ke tse latelang: ho Multi utility mode: transzparent mode, Meter port baud rate: 9600, Data format: Fixed 8N1). Ebe o tobetsa konopo ea OK.
• Mohato oa #6: Litlhophiso tsa RS485 li ka etsoa sehlopheng sa RS485 meter interface parameter. Mokhoa oa RS485 o ka hlophisoa mona. Haeba u sebelisa boema-kepe ba RS232 joale u tlameha ho tima khetho ena litlhophisong! Ebe o tobetsa konopo ea OK.
• Mohato oa #7: Kamora litlhophiso u tlameha ho khetha letšoao la ho ngola la Parameter ho romella litlhophiso ho modem. U ka bona tsoelo-pele ea ho kenya sebakeng se ka tlase sa boemo ba tsoelo-pele. Qetellong ea ts'ebetso, modem e tla qala hape 'me e tla qala ka li-setting tse ncha.
• Mohato oa #8: Haeba u batla ho sebelisa modem ho boema-kepe ba RS485 bakeng sa ho bala mithara, ka hona, ka mor'a tlhophiso, fetola li-jumpers ho RS485 mode!

Likhetho tse ling tsa ho seta

• Ho sebetsana le modem ho ka hloekisoa ho sehlopha sa parameter ea Watchdog.
• Mekhahlelo e hlophisitsoeng e lokela ho bolokoa komporong ea hau hape ka File/ Boloka menu.
• Ntlafatso ea Firmware: khetha Menu ea Lisebelisoa, le ntho ea ho kenya Single Firmware (moo o ka kenyang e loketseng.Katoloso ea DWL file). Ka mor'a tsoelo-pele ea ho kenya, modem e tla qala hape 'me e sebetse ka firmware e ncha le litlhophiso tse fetileng!

TS'ESO
Sehlahisoa se na le lets'oao la CE ho latela melaoana ea Europe.
Litokomane tsa sehlahisoa, software li ka fumanoa ho sehlahisoa websebaka: https://www.m2mserver.com/en/product/wm-e2s/

Litokomane / Lisebelisoa

wm WM-E2S Modem [pdf] Bukana ea Mosebelisi WM-E2S Modem, WM-E2S, Modem, ACE6000, ACE8000, SL7000, Limithara tsa Motlakase

Litšupiso

• Bukana ea Mosebelisi