Imodem yeWM-E2S

UQHAGAMSHELO

1. Iplastiki ebiyelweyo kunye nekhava yayo ephezulu
2. I-PCB (i-mainboard)
3. Amanqaku okuqinisa (ukulungisa lags)
4. Isibambi sendlebe (ikhululekile ukuvula isiciko esiphezulu)
5. Isidibanisi se-eriyali ye-FME (50 Ohm) – ngokuzikhethela: Isidibanisi se-eriyali ye-SMA
6. Ii-LED zesimo: ukusuka phezulu ukuya ezantsi: i-LED3 (eluhlaza), i-LED1 (ebhlowu), i-LED2 (ebomvu)
7. Ihinge yokugquma
8. Isibambi sekhadi leSIM encinci (yitsalele ekunene kwaye uyivule)
9. Isidibanisi se-eriyali yangaphakathi (U.FL –FME)
10. Isidibanisi se-RJ45 (uqhagamshelwano lwedatha kunye nonikezelo lwamandla e-DC)
11. Ibhodi yokutsiba (ye-RS232/RS485 ukhetho lwemowudi enezijumpi)
12. Ii-Super-capacitors
13. Isidibanisi sangaphandle

UKUNIKEZELWA KWAMANDLA KUNYE NEEMEKO ZOKUSINGQONGILEYO

• Umbane wamandla: 8-12V DC (10V DC nominal), Okwangoku: 120mA (Itron® ACE 6000), 200mA (Itron® SL7000), Ukusetyenziswa: max. 2W @ 10V DC
• Igalelo lamandla: unokubonelelwa ngomitha, ngokusebenzisa i-RJ45 ikhonkco
• Unxibelelwano olungenacingo: ngokwemodyuli ekhethiweyo (ukhetho lokuodola)
• Amazibuko: RJ45 uxhumano: RS232 (300/1200/2400/4800/9600 baud) / RS485
• Ubushushu bokusebenza: -30 ° C * ukuya +60 ° C, rel. 0-95% rel. ukufuma (* TLS: ukusuka -25 ° C) / Ubushushu bokugcina: ukusuka -30 ° C ukuya +85 ° C, rel. 0-95% rel. ukufuma
  *kwimeko ye-TLS: -20°C

IDATHA YOMCHWEPHEKO / UYILO

• Imilinganiselo: 108 x 88 x 30mm, Ubunzima: 73 gr
• Impahla: Imodem ine-transparent, IP21 ekhuselweyo, i-antistatic, i-non-conductive yezindlu zeplastiki. I-enclosure inokugqithwa ngeendlebe zokulungisa phantsi kwekhava ye-terminal yemitha.
• Ukulungiswa kwe-DIN-umzila we-Optional unoku-odolwa (iyunithi ye-adapter ye-fastener ihlanganiswe kwicala elingasemva le-enclosure ngezikrufu) ngoko ingasetyenziswa njengemodem yangaphandle.

AMANYATHELO OKUFAKA

• Inyathelo #1: Susa isiciko seterminal yemitha ngezikrufu zayo (nge screwdriver).
• Inyathelo #2: Qinisekisa ukuba imodem AYIKHO phantsi kombane, susa uqhagamshelo lwe-RJ45 kwimitha. (Umthombo wamandla uya kususwa.)
• Inyathelo #4: Ngoku iPCB iya kubekwa ekhohlo njengoko inokubonwa kwifoto. Tyhila isiciko sesibambi seplastiki seplastiki (8) ukusuka ekhohlo ukuya kwicala lasekunene, uze usivule.
• Inyathelo #5: Faka iSIM khadi esebenzayo kwisibambi (8). Yithathele ingqalelo indawo elungileyo (itshiphu ijonge ezantsi, icala elisikiweyo lekhadi lijonge ngaphandle kwi-eriyali. Tyhila iSIM kwisiporo esikhokelayo, vala isibambi seSIM, kwaye uyityhale ngasemva (8) ukusuka ekunene ukuya kwicala lasekhohlo, uze uvale. ngasemva.
• Inyathelo #6: Qinisekisa ukuba intambo emnyama yangaphakathi ye-eriyali iqhagamshelwe kwisidibanisi se-U.FL (9)!
• Inyathelo #7: Vala ngasemva isiciko esingaphezulu sesivalo (1) ngeendlebe zokubopha (4). Uya kuva isandi sokucofa.
• Inyathelo #8: Nyusa i-eriyali kwisidibanisi se-eriyali ye-FME (5). (Ukuba usebenzisa i-eriyali ye-SMA, ngoko sebenzisa isiguquli se-SMA-FME).
• Inyathelo #9: Qhagamshela imodem kwikhompyuter ngentambo ye-RJ45 kunye ne-RJ45-USB converter, kwaye usete indawo ye-jumper kwimo ye-RS232. (imodem ingaqwalaselwa kuphela kwimo ye-RS232 ngentambo!)
• Inyathelo #10: Qwalasela imodem ngeWM-E Term® software.
• Inyathelo #11: Emva kokuba uqwalaselo lusete i-jumpers (11) kwakhona, vala i-jumper pairs ezifunekayo (iingcebiso zinokufumaneka kwi-jumper crossboard) - imowudi ye-RS232: i-jumpers yangaphakathi ivaliwe / i-RS485 imo: i-winger pins ivaliwe abaxhume.
• Inyathelo #12: Qhagamshela intambo ye-RJ45 umva kwimitha. (Ukuba imodem iya kusetyenziswa kwizibuko le-RS485, ngoko ke kuya kufuneka uguqule abatsiba kwimo ye-RS485!)
• Inyathelo #13: Imodem→Uqhagamshelo lwemitha ye-Itron® inokuqaliswa nge-RS232 okanye i-RS485 port. Ngoko ke qhagamshela intambo ye-RJ45 engwevu (14) kwi-RJ45 port (10).
• Inyathelo #14: Elinye icala lentambo ye-RJ45 kufuneka liqhagamshelwe kwisidibanisi semitha ye-RJ45 ngokohlobo lwemitha, kunye ne-readout port (RS232 okanye RS485). Imodem iya kunikwa amandla yimitha ngoko nangoko kwaye ukusebenza kwayo kuya kuqaliswa – okunokuthi kujongwe ngee-LEDs.

UKUSEBENZA IIMPAWU ZE-LED – KWIXASO LOKUHLAWULA
Ingqalelo! Imodem kufuneka ihlawulwe phambi kokusetyenziswa kokuqala - okanye ukuba ibingasetyenziswanga ixesha elide. Intlawulo ithatha malunga ne- ~ 2 imizuzu ukuba i-supercapacitor iphelile / ikhutshwe.

I-LED		Intsomi	Sayina
		Kwisimo sokuqala, ngexesha lokutshaja ii-supercapacitors eziphelelweyo, kuphela luhlaza I-LED iya kudanya ngokukhawuleza. Kuphela le LED esebenzayo ngexesha lokuhlawuliswa. Linda de ifowuni igcwaliswe ngokupheleleyo.	●
I-LED3

Ngaphezulu kokungagqibekanga kwefektri, ukusebenza kunye nokulandelelana kweempawu ze-LED kunokutshintshwa yi-WM-E Term® ithuluzi lokucwangcisa, kwiqela le-parameter ye-General Meter Settings. Esimahla yokukhetha ezinye iinketho ze-LED inokufumaneka kwi-WM-E2S® yemodem yoFakelo lweManyuwali.
UKUSEBENZA IIMPAWU ZE-LED – KWIMEKO YOKUSEBENZA OKUQHELEKILEYO

I-LED	Iziganeko
I-LED3 I-SIM ubume / I-SIM ukusilela or I-PIN ikhowudi ukusilela	Ukukhanya okuqhubekayo, de ifowuni ingabikho kwinethiwekhi yeselula kwaye i-RSSI ayinakubonwa (i-SIM ilungile) Xa i I-SIM I-PIN is okay: led yiyo esebenzayo Ukuba kukho Hayi I-SIM ibhaqwe okanye I-SIM I-PIN is engalunganga: Ukuqhwanyaza Kanye ngokwe Isibini (idanyaza kancinci) Ixabiso le-RSSI (amandla omqondiso) lisayinwe kwakhona yile LED. Ukudanyaza ngo-“N”-amaxesha kwimizuzwana eyi-10-15, kuxhomekeke kwixesha lokuhlaziya le-RSSI. Ixabiso le-RSSI linokuba ngu-1,2,3 okanye 4 kwinethiwekhi yeselula yangoku. Amanani okudanyaza kweRSSI ahlukile kuzo zonke itekhnoloji yenethiwekhi, ngokulandelayo: on 2G: 1 idanyaza: RSSI >= -98 / 2 idanyaza: RSSI phakathi -97 kunye -91 / 3 idanyaza: RSSI -90 ukuya -65 / 4 idanyaza: RSSI > -64 on 3G: Ukudanyaza oku-1: RSSI >= -103 / 2 okudanyazayo: RSSI phakathi kwe -102 kunye -92 / 3 idanyaza: RSSI -91 ukuya -65 / 4 idanyaza: RSSI > -64 on 4G LTE: 1 idanyaza: RSSI >= -122 / 2 idanyaza: RSSI phakathi -121 ukuya -107 / 3 idanyaza: RSSI -106 ukuya -85 / 4 idanyaza: RSSI > -84 on LTE Ikati.M1: Ukudanyaza oku-1: RSSI >= -126 / 2 okudanyazayo: RSSI phakathi kwe -125 kunye -116 / 3 idanyaza: RSSI -115 ukuya -85 / 4 idanyaza: RSSI > -84 on LTE Ikati. I-NB-IoT (Imxinwa Ibhendi): Ukudanyaza oku-1: RSSI >= -122 / 2 okudanyazayo: RSSI -121 ukuya -107 / 3 okudanyazayo: RSSI phakathi kwe -106 kunye -85 / 4 ezidanyazayo: RSSI > -84
I-LED1 GSM / GPRS ubume	Ngexesha lobhaliso lwenethiwekhi: i-led iyasebenza Ngexesha lokukhangela kwenethiwekhi: ukuqhwanyaza kanye ngesekhondi Xa uqhagamshelwe kwinethiwekhi kunye noqhagamshelwano lwe-IP lulungile: ukuqhwanyaza kabini ngesibini Xa iteknoloji yokufikelela kwinethiwekhi yeselula yatshintshwa: ukukhanya okukhawulezayo kuya kuthenjwa: 2G 2 edanyazayo ngesekhondi / 3G 3 edanyazayo ngesekhondi / 4G 4 edanyazayo ngesekhondi Ukuba akukho nethiwekhi yeselula efunyenweyo: i-led iya kuba ngenanto Ngexesha lokufowuna kwe-CSD kunye nokuhanjiswa kwedatha ye-IP, i-LED ikhanya ngokuqhubekayo
I-LED2 Ubume bemitha ye-E	Ngokubanzi: i-led ayisebenzi Ngexesha lonxibelelwano: i-lead iyasebenza (i-flashing)

Qaphela ukuba ngexesha le-firmware yokulayisha ii-LED zisebenza njengesiqhelo - akukho mqondiso obalulekileyo we-LED wenkqubela phambili yokuhlaziya i-FW. Emva kofakelo lweFirmware, ii-LED ezi-3 ziya kukhanyisa imizuzwana emi-5 kwaye zonke ziya kuba ngenanto, emva koko imodem iqalise kwakhona nge-firmware entsha. Emva koko zonke iimpawu ze-LED ziya kusebenza njengoko kudweliswe ngasentla.

UQINISEKISO LWEMODEM
Imodem inokumiswa kunye nesoftware yeWM-E Term® ngokuseta iiparamitha zayo. Oku kufuneka kwenziwe ngaphambi kokusebenza kunye nokusetyenziswa.

• Ngethuba lenkqubo yokucwangcisa, i-RJ45 (5) ikhonkco kufuneka ikhutshwe kwisixhumi semitha kwaye kufuneka ixhunywe kwi-PC. Ngexesha loqhagamshelo lwePC idatha yemitha ayinakufunyanwa yimodem.
• Xhuma imodem kwikhompyuter ngentambo ye-RJ45 kunye ne-RJ45-USB converter. Abatsibayo kufuneka babe kwindawo ye-RS232!
  Kubalulekile! Ngethuba lokucwangciswa, ukunikezelwa kwamandla emodem kuqinisekiswa yile bhodi yokuguqula, kwi-USB uxhumano. Ezinye iikhompyuter zinobuntununtunu kutshintsho lwangoku lwe-USB. Kule meko kufuneka usebenzise unikezelo lwamandla lwangaphandle kunye noqhagamshelo olukhethekileyo.
• Emva kolungelelwaniso phinda udibanise intambo ye-RJ45 kwimitha!
• Kuqhagamshelo lwentambo yesiriyali qwalasela useto lwezibuko ze-COM zekhompyuter eqhagamshelweyo ngokwemodem yothotho lweepropathi zezibuko kwiWindows kwimenyu yokuQala / Iphaneli yokulawula / uMphathi weSixhobo / iiPort (COM kunye neLTP) kwiiPropathi: Bit/sec: 9600 , Amasuntswana eDatha: 8, Ukulingana: Akukho nanye, Misa amasuntswana: 1, Ibhendi enolawulo: Hayi
• Uqwalaselo lungenziwa nge-CSData ifowuni okanye uqhagamshelwano lwe-TCP ukuba i-APN sele iqwalaselwe.

UQINISEKISO LWEMODEM NGEXESHA LE-WM-E®
IMicrosoft .NET framework runtime environment iyafuneka kwikhompyuter yakho. Kuqwalaselo lwemodem kunye novavanyo uya kufuna i-APN/iphakheji yedatha evuliweyo, iSIM khadi esebenzayo.
Ulungelelwaniso lunokwenzeka ngaphandle kweSIM khadi, kodwa kule meko imodem isebenza ngokutsha ngamaxesha athile, kwaye ezinye iimpawu zemodem aziyi kufumaneka de ifakwe ikhadi leSIM (umz. ukufikelela kude).

Uqhagamshelo kwimodem (nge-RS232 port*)

• Inyathelo #1: Khuphela i https://www.m2mserver.com/m2m-downloads/WM-ETerm_v1_3_63.zip file. Susa ucinezelo kwaye uqalise i-wm-eterm.exe file.
• Inyathelo #2: Cofa iqhosha lokuNgena kwaye ukhethe isixhobo se-WM-E2S ngokuthi Khetha iqhosha.
• Inyathelo #3: Ekhohlo kwikhusi, kuhlobo loQhagamshelwano thebhu, khetha i Uthotho tab, kwaye ugcwalise indawo entsha yoqhagamshelo (uqhagamshelo olutsha profile name) kwaye cinezela i Yenza iqhosha.
• Inyathelo #4: Khetha i-port efanelekileyo ye-COM kwaye uqwalasele isantya sokuhanjiswa kweDatha kwi-9600 baud (kwi-Windows® kufuneka uqwalasele isantya esifanayo). Ixabiso lohlobo lweDatha kufuneka libe ngu-8,N,1. Cofa i Gcina iqhosha ukwenza unxibelelwano lube profile.
• Inyathelo #5: Emazantsi kwicala lasekhohlo kwesikrini khetha uhlobo loqhagamshelo (uthotho).
• Inyathelo #6: Khetha i icon yolwazi lweDivaysi kwimenyu kwaye ujonge ixabiso leRSSI, ukuba amandla omqondiso anele kwaye indawo ye-antenna ilungile okanye hayi.
  (Isalathisi kufuneka sibe tyheli ubuncinane (uphawu oluphakathi) okanye lube luhlaza (umgangatho wophawu olulungileyo). Ukuba unamaxabiso abuthathaka, tshintsha indawo ye-eriyali ngelixa ungazukufumana xabiso elingcono le-dBm. (kufuneka ucele imeko kwakhona nge-icon ).
• Inyathelo #7: Khetha i-ayikhoni yokufunda iParameter yoqhagamshelwano lwemodem. Imodem iya kudityaniswa kwaye ixabiso layo parameter, izichazi ziya kufundwa ngaphandle. *Ukuba usebenzisa umnxeba wedata (CSD) okanye uqhagamshelo lwe-TCP/IP ukude ngemodem- jonga incwadana yoFakelo lweeparamitha zoqhagamshelwano!

Uqwalaselo lweParameter

• Inyathelo #1: Khuphela iXesha le-WM-Eample uqwalaselo file, ngokohlobo lwemitha ye-Iron. Khetha i File / Layisha imenyu ukulayisha i file.
• RS232 okanye RS485 imowudi: https://m2mserver.com/m2m-downloads/WM-E2S-STD-DEFAULT-CONFIG.zip
• Inyathelo #2: Kwiqela leParameter khetha iqela le-APN, uze ucofe kwi Hlela amaxabiso iqhosha. Chaza iseva ye-APN kwaye xa kuyimfuneko i-APN Igama lomsebenzisi kunye neendawo zokugqitha ze-APN, kwaye utyhale kwiqhosha elithi OK.
• Inyathelo #3: Khetha iqela leparameter yeM2M, emva koko ucofe Hlela amaxabiso iqhosha. Yongeza inombolo ye-PORT kwi-Transparent (IEC) imitha yokufunda indawo yezibuko - eya kusetyenziselwa ukufunda imitha ekude. Nika uqwalaselo PORT NUMBER kuqwalaselo kunye ne-firmware yokukhuphela izibuko.
• Inyathelo #4: Ukuba i-SIM isebenzisa i-PIN ye-SIM, ke kufuneka uyichaze kwiqela le parameter yenethiwekhi yeMobile, kwaye uyinike kwindawo ye-PIN ye-SIM. Apha ungakhetha iTekhnoloji yeMobile (umzekelo. Bonke ubuchwephesha bothungelwano obukhoyo – ekucetyiswa ukuba bukhethwe) okanye khetha i-LTE ukuya ku-2G (i-fallback) yoqhagamshelwano lwenethiwekhi. Unokukhetha kwakhona umsebenzisi wefowuni kunye nenethiwekhi- njengezenzekelayo okanye ngesandla. Emva koko cofa kwiqhosha elithi OK.
• Inyathelo #5: I-RS232 ye-serial port kunye nezicwangciso ezicacileyo zinokufumaneka kwi-Trans. / Iqela leparameter ye-NTA. Izicwangciso ezingagqibekanga zezi zilandelayo: kwimowudi yemisebenzi emininzi: imowudi ye-transzparent, i-Meter port baud rate: 9600, ifomathi yeDatha: Fixed 8N1). Emva koko cofa kwiqhosha elithi OK.
• Inyathelo #6: Izicwangciso zeRS485 zinokwenziwa kwiqela leparameter yojongano lweemitha zeRS485. Imo ye-RS485 inokusetwa apha. Ukuba usebenzisa izibuko le-RS232 ke kuya kufuneka ucime olu khetho kuseto! Emva koko cofa kwiqhosha elithi OK.
• Inyathelo #7: Emva koseto kufuneka ukhethe i icon yokubhala iParameter ukuthumela useto kwimodem. Uyakwazi ukubona inkqubela phambili yokulayisha kwibar yenkqubela yesimo esisezantsi. Ekupheleni kwenkqubela phambili, imodem iya kuqalwa kwakhona kwaye iya kuqalisa ngezicwangciso ezitsha.
• Inyathelo #8: Ukuba ufuna ukusebenzisa imodem kwi RS485 port yokufunda imitha, ke ngoko emva koqwalaselo, guqula kancinane abatsiba kwimowudi yeRS485!

Olunye ukhetho lokuseta

• Ukuphathwa kwemodem kunokucocwa kwiqela le-parameter ye-Watchdog.
• Iiparamitha eziqwalaselweyo kufuneka zigcinwe kwikhompyuter yakho kwakhona nge File/Gcina imenyu.
• Ukuphuculwa kweFirmware: khetha iDevices menu, kunye neFirmware enye yokulayisha into (apho unokulayisha ngokufanelekileyo.DWL ulwandiso file). Emva kwenkqubela phambili yokulayisha, imodem iya kuqalisa kwaye isebenze kunye ne-firmware entsha kunye nezicwangciso zangaphambili!

INKXASO
Imveliso inophawu lwe-CE ngokwemigaqo yaseYurophu.
Amaxwebhu emveliso, isoftware inokufumaneka kwimveliso webindawo: https://www.m2mserver.com/en/product/wm-e2s/

Amaxwebhu / Izibonelelo

wm WM-E2S Imodem [pdf] Isikhokelo somsebenzisi IModem ye-WM-E2S, i-WM-E2S, iModem, i-ACE6000, i-ACE8000, i-SL7000, iimitha zoMbane

Iimbekiselo

• Incwadi yokusebenzisa