unitronics IO-AO6X Input-Output Expansion Module
6 I-Isolated Analog Outputs
I-IO-AO6X iyimojuli yokunweba ye-I/O engasetshenziswa ngokuhambisana nezilawuli ezithile ze-Unitronics OPLC. Imojula inikeza okuphumayo okukodwa okungu-6 12-bit; isebenza ku-0-10V, 0-20mA, kanye ne-4-20mA. Ukuxhumana phakathi kwemojula ne-OPLC kuhlinzekwa nge-adaptha. Imojuli ingase igxunyekwe ngokushesha kumzila wesitimela we-DIN, noma ifakwe isikulufu ku-mounting plate.
| Ukuhlonza ingxenye | |
| 1 | Isixhumi semojula-kuya-mojuli |
| 2 | Isibonisi sesimo sokuxhumana |
| 3 | Inkomba yokuphakelwa kwamandla ehlukanisiwe |
| 4 | Amaphoyinti okuxhuma okukhiphayo, AO4-AO5 |
| 5 | Amaphoyinti okuxhuma amandla |
| ukuhlinzeka kuyunithi ye-analog | |
| 6 | Imbobo yesixhumi semojula kuya kumojuli |
| 7 | Amaphoyinti okuxhuma okukhiphayo, AO0-AO3 |
- Ngaphambi kokusebenzisa lo mkhiqizo, kuyisibopho somsebenzisi ukufunda nokuqonda lo mbhalo nanoma yimiphi imibhalo ehambisana nawo.
- Konke exampimidwebo nemidwebo eboniswe lapha ihloselwe ukusiza ukuqonda, futhi ayiqinisekisi ukusebenza. I-Unitronics ayiwamukeli umthwalo wemfanelo wokusetshenziswa kwangempela kwalo mkhiqizo ngokusekelwe kulawa exampLes.
- Sicela ulahle lo mkhiqizo ngokuhambisana namazinga nemithetho kazwelonke yendawo nekazwelonke.
- Izisebenzi zesevisi eziqeqeshiwe kuphela okufanele zivule lolu cingo noma zilungise.
Imihlahlandlela yokuphepha kwabasebenzisi kanye nempahla yokusebenza
Lo mbhalo uhloselwe ukusiza abasebenzi abaqeqeshiwe nabanekhono ekufakweni kwalo mshini njengoba kuchazwe yiziqondiso zaseYurophu zemishini, i-low vol.tage, kanye ne-EMC. Uchwepheshe kuphela noma unjiniyela oqeqeshwe kumazinga kagesi endawo nawezwe okufanele enze imisebenzi ehambisana nezintambo zikagesi zedivayisi. Izimpawu zisetshenziselwa ukugqamisa ulwazi oluhlobene nokuphepha komuntu siqu komsebenzisi kanye nokuvikelwa kwempahla kuyo yonke le dokhumenti. Lapho lezi zimpawu zivela, ulwazi oluhlobene kufanele lufundwe ngokucophelela futhi luqondwe ngokugcwele.
| Incazelo | Incazelo |
| Ingozi | Ingozi ekhonjiwe idala ukulimala ngokomzimba kanye nempahla. |
| Isexwayiso | Ingozi ekhonjiwe ingabangela ukulimala ngokomzimba kanye nempahla. |
| Isexwayiso | Qaphela. |
- Ukwehluleka ukuthobela izinkombandlela zokuphepha ezifanele kungaholela ekulimaleni okukhulu komuntu siqu noma ekulimaleni kwempahla. Njalo sebenzisa ukuqapha okufanele lapho usebenza ngezinto zikagesi
- Hlola uhlelo lomsebenzisi ngaphambi kokulusebenzisa.
- Ungazami ukusebenzisa le divayisi ngemingcele eyeqa amazinga avunyelwe.
- Faka i-circuit breaker futhi uthathe izinyathelo ezifanele zokuphepha ngokumelene ne-short-circuiting kuzintambo zangaphandle.
- Ukuze ugweme ukulimaza isistimu, ungaxhumeki / unganqamuli idivayisi lapho amandla avuliwe.
Ukucatshangelwa Kwemvelo
- Ungafaki ezindaweni: ezinothuli oluningi noma oluhambisayo, igesi ebolayo noma evuthayo, umswakama noma imvula, ukushisa okudlulele, ukushaqeka okujwayelekile noma ukudlidliza okukhulu.
- Shiya okungenani isikhala esingu-10mm sokungenisa umoya phakathi kwamaphethelo angaphezulu naphansi ocingo kanye nezindonga ezivalekile.
- Ungawabeki emanzini noma uvumele amanzi avuzele eyunithi.
- Ungavumeli imfucumfucu iwele ngaphakathi kweyunithi phakathi nokufakwa.
Ukukhweza Imojuli
Ukukhwezwa kwe-DIN-rail
Thinta idivayisi kumzila wesitimela we-DIN njengoba kukhonjisiwe ngezansi; imojula izotholakala ngokulingana kumzila wesitimela we-DIN.
I-Screw-Mounting
Umfanekiso osekhasini elilandelayo udwetshwa esikalini. Ingase isetshenziswe njengegayidi yokufaka isikulufu semojuli. Uhlobo lwesikulufu sokukhweza: kungaba i-M3 noma i-NC6-32.
Ixhuma Amamojula Wokunweba
I-adaptha inikeza ukuxhumana phakathi kwe-OPLC nemojula yokwandisa. Ukuze uxhume imojula ye-I/O ku-adaptha noma kwenye imojuli: Phusha isixhumi semojula siye kumojuli esikhaleni esingakwesokudla socingo.
Qaphela ukuthi kukhona isivikelo esinikezwe ne-adaptha. Le cap ifaka imbobo yemojuli ye-I/O yokugcina ohlelweni Ukuze ugweme ukulimaza isistimu, ungaxhumeki noma unqamule idivayisi lapho amandla avuliwe.
| Ukuhlonza ingxenye | |
| 1 | Isixhumi semojula-kuya-mojuli |
| 2 | Isigqoko sokuzivikela |
Izintambo
- Ungazithinti izintambo ezibukhoma.
- Izikhonkwane ezingasetshenzisiwe akufanele zixhunywe. Ukuziba lesi siqondiso kungase kulimaze idivayisi.
- Ungaxhumi isignali 'Yokumaphakathi noma 'Yomugqa' ye-110/220VAC kuphinikhodi ye-0V yedivayisi.
- Hlola kabili zonke izintambo ngaphambi kokuvula ugesi
Izinqubo zezintambo
Sebenzisa amatheminali e-crimp ukwenza izintambo; sebenzisa intambo engu-26-12 AWG (0.13 mm 2–3.31 mm2) kuzo zonke izinjongo zokufaka izintambo.
- Hlikihla ucingo lube ubude obungu-7±0.5mm (0.250–0.300 amayintshi).
- Khipha itheminali endaweni yayo ebanzi kakhulu ngaphambi kokufaka intambo.
- Faka intambo ngokuphelele kutheminali ukuze uqinisekise ukuthi kungenziwa uxhumano olufanele.
- Qinisa ngokwanele ukugcina intambo ingadonsi mahhala.
- Ukuze ugweme ukulimaza ucingo, ungeqi i-torque engu-0.5 N·m (5 kgf·m).
- Ungasebenzisi ithini, i-solder, nanoma iyiphi enye into ocingweni olukhumuliwe olungase ludabule umucu wocingo.
- Faka ebangeni eliphezulu ukusuka ku-high-voltagizintambo ze-e kanye nempahla yamandla.
I/O Wiring—General
- Amakhebuli okokufaka noma okukhiphayo akufanele asetshenziswe ngentambo efanayo yama-multi-core noma abelane ngentambo efanayo.
- Vumela ivolumutagUkuphazamiseka kwe-e nomsindo nemigqa yokufaka esetshenziswa ebangeni elinwetshiwe. Sebenzisa intambo enosayizi ofanele wokulayisha.
Imiphumela ye-Analog
- Izihlangu kufanele zenziwe umhlabathi, zixhunywe emhlabeni wekhabhinethi.
- Ungaxhumi okukhiphayo okungasetshenzisiwe.
- Okuphumayo kungenziwa ngentambo kuya ku-current noma ku-voltage.
- Ungasebenzisi i-current ne-voltage kusuka esiteshini somthombo ofanayo.
- Izimpawu ze-COM zokukhiphayo zifushanisiwe ngaphakathi
| IO-AO6X Imininingwane Yobuchwepheshe | |
| Ubukhulu. ukusetshenziswa kwamanje | I-32mA ephezulu ukusuka ku-5VDC ye-adaptha |
| Ukusetshenziswa kwamandla okujwayelekile | 29mA @ 5VDC |
| Inkomba yesimo | |
| (GIJIMA) | I-LED eluhlaza:
-Kukhanya lapho isixhumanisi sokuxhumana sisungulwa phakathi kwemojula ne-OPLC. - Iyacwayiza lapho isixhumanisi sokuxhumana sihluleka. |
| Inkomba yamandla ehlukanisiwe
(ISO. PWR) |
I-LED eluhlaza:
-Kukhanya lapho ugesi ongawodwa uvuliwe. |
| Ukuzihlukanisa | |
| Isiteshi esiya ebhasini | Yebo |
| Isiteshi sokuphakelwa kwamandla | Yebo |
| Isiteshi esiteshini | Cha |
| Imiphumela ye-Analog | |
| Inani lokuphumayo | 6 (okukodwa) |
| Ibanga lokukhipha | 0-10V, 0-20mA, 4-20mA. Bheka Inothi 1. |
| Ukulungiswa (ngaphandle kokuthi 4-20mA) Ukulungiswa kokuthi 4-20mA | 12-bit (4096 amayunithi)
819 kuya ku-4095 (3277 amayunithi) |
| Layisha impedance | 1kΩ ubuncane—ivolumutage
500Ω umkhawulo—okwamanje. Bheka Inothi 2. |
| Isikhathi sokuguqulwa | 2 mSec, evunyelaniswe ekuxhumaneni okunwetshiwe. |
| Iphutha lomugqa | ±0.1% |
| Imikhawulo yamaphutha okusebenza | ±0.2% |
| I-Analog Power Supply | 24VDC |
| Ibanga elivumelekile | 20.4 ukuze 28.8VDC |
| Ubukhulu. ukusetshenziswa kwamanje | 170mA@24VDC |
| Ezemvelo | IP20 / NEMA1 |
| Izinga lokushisa lokusebenza | 0° ukuya ku-50°C (32 kuya ku-122° F) |
| Izinga lokushisa lesitoreji | -20° ukuya ku-60°C (-4 kuya ku-140° F) |
| Umswakamo Ohlobene (RH) | 5% kuya ku-95% (okungafinyeleli) |
| Ubukhulu (WxHxD) | 80mm x 93mm x 60mm (3.15 x 3.66 x 2.362”) |
| Isisindo | 159g (5.6oz.) |
| Ukukhweza | Kuphakathi kuka-35mm DIN-rail noma kufakwe isikulufu. |
| Amanothi: | |
| 1. Qaphela ukuthi ububanzi be-I/O ngayinye buchazwa kokubili ngezintambo nangaphakathi kwesofthiwe yesilawuli.
2. Uma okukhiphayo kwe-analogi kusethelwe ukusebenzisa okwamanje, okukhiphayo kufanele kuxhunywe ngaphambili amandla avuliwe. |
|
Ikhuluma nama-I/Os kumamojula Wokunweba
Okokufaka nokuphumayo okutholakala kumamojula wokunweba we-I/O axhunywe ku-OPLC anikezwa amakheli ahlanganisa uhlamvu nenombolo. Uhlamvu lubonisa ukuthi i-I/O iwukufaka (I) noma okukhiphayo (O). Inombolo ikhombisa indawo ye-I/O ohlelweni. Le nombolo ihlobene nakho kokubili ukuma kwemojula yokwandisa ohlelweni, kanye nendawo ye-I/O kuleyo mojula. Amamojula okunweba anezinombolo ukusuka ku-0-7 njengoba kukhonjisiwe esithombeni esingezansi.
Ifomula engezansi isetshenziselwa ukwaba amakheli amamojula e-I/O asetshenziswa ngokuhambisana ne-M90 OPLC. U-X inombolo emele indawo yemojuli ethile (0-7). U-Y inombolo yokokufaka noma okukhiphayo kuleyo mojula ethile (0-15). Inombolo emele indawo ye-I/O ilingana no: 32 + x • 16 + y
ExampLes
- Okokufaka #3, okutholakala kumojula #2 yokwandisa ohlelweni, kuzobhekwa njenge-I 67, 67 = 32 + 2 • 16 + 3
- Okukhiphayo #4, okutholakala kumojula #3 yokwandisa ohlelweni, kuzobhekwa njengo-O 84, 84 = 32 + 3 • 16 + 4
I-EX90-DI8-RO8 iyimojuli ye-I/O ezimele yodwa. Ngisho noma kuwukuphela kwemojula ekucushweni, i-EX90-DI8- RO8 ihlale inikezwa inombolo 7. I-I/Os yayo iqondiswa ngokufanele.
Example
Okokufaka #5, okutholakala ku-EX90-DI8-RO8 exhunywe ku-M90 OPLC kuzobhekwa njengo-I 149, 149 = 32 + 7 • 16 + 5
Ukuhambisana kwe-UL
Imikhiqizo ebhalwe ngenhla ingasetshenziswa nama-Unitronics PLCs ahambisanayo. Imihlahlandlela Yokufaka enemininingwane equkethe imidwebo yezintambo ye-I/O yalawa mamodeli, ukucaciswa kobuchwepheshe, kanye nemibhalo eyengeziwe kutholakala Kulabhulali Yezobuchwepheshe ku-Unitronics. webindawo: https://unitronicsplc.com/support-technical-library/
Isigaba esilandelayo sihambisana nemikhiqizo ye-Unitronics esohlwini lwe-UL. Amamodeli alandelayo: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8, IO- I-DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X zifakwe kuhlu lwe-UL Lwezindawo Eziyingozi. Amamodeli alandelayo: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IO-AI4-AO2, IO-AI4-AO2-B, IO- I-AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-L, IO DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO- I-LC3, IO-PT4, IO-PT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X, EX-RC1 zifakwe kuhlu lwe-UL yendawo Ejwayelekile. Izilinganiso ze-UL, Izilawuli Ezihlelekayo Ezizosetshenziswa Ezindaweni Eziyingozi, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D Lawa manothi okukhishwa ahlobene nayo yonke imikhiqizo ye-Unitronics enezimpawu ze-UL ezisetshenziselwa ukumaka imikhiqizo egunyazwe ukusetshenziswa ezindaweni eziyingozi. izindawo, Ikilasi I, Isigaba 2, Amaqembu A, B, C kanye no-D.
Isexwayiso
- ◼Lesi sisetshenziswa silungele ukusetshenziswa Ekilasini I, Isigaba 2, Amaqembu A, B, C kanye no-D, noma ezindaweni ezingezona eziyingozi kuphela.
- Izintambo zokufaka nokuphumayo kufanele zihambisane nezindlela zokufaka izintambo zeSigaba I, isigaba 2 futhi ngokuhambisana negunya elinegunya.
- ISEXWAYISO-Ingozi Yokuqhuma—ukushintshanisa izingxenye kungase kukhinyabeze ukufaneleka Kwekilasi I, Isigaba 2.
- ISEXWAYISO – INGOZI YOKUQHUBEKA – Ungaxhumi noma unqamule amathuluzi ngaphandle uma ugesi ucishiwe noma indawo yaziwa ngokuthi ayinabungozi.
- ISEXWAYISO – Ukuchayeka kwamanye amakhemikhali kungase kwehlise izinga lokuvala impahla esetshenziswa kuma-Relay.
- Lo mshini kufanele ufakwe kusetshenziswa izindlela zokufaka izintambo njengoba kudingeka ku-Class I, Division 2 ngokwe-NEC kanye/noma i-CEC.
Izilinganiso Zokumelana Nokukhipha Okudluliselweyo
Imikhiqizo efakwe ohlwini ngezansi iqukethe okuphumayo kwe-relay: Amamojula wokunweba okokufaka/Okukhiphayo, Amamodeli: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L Uma le mikhiqizo ethile isetshenziswa ezindaweni eziyingozi, iyalinganiselwa. ku-3A res, lapho le mikhiqizo ethile isetshenziswa ezimweni zemvelo ezingenabungozi, ilinganiselwa ku-5A res, njengoba inikezwe ekucacisweni komkhiqizo.
Ulwazi olukulo mbhalo lubonisa imikhiqizo ngosuku lokuphrinta. I-Unitronics igodla ilungelo, kuncike kuyo yonke imithetho esebenzayo, nganoma yisiphi isikhathi, ngokubona kwayo kuphela, futhi ngaphandle kwesaziso, lokuyeka noma ukushintsha izici, imiklamo, izinto zokwakha kanye neminye imininingwane yemikhiqizo yayo, kanye nokuhoxisa unomphela noma okwesikhashana noma yikuphi abashiye emakethe. Lonke ulwazi olukule dokhumenti lunikezwa “njengoba lunjalo” ngaphandle kwewaranti yanoma yiluphi uhlobo, evezwayo noma eshiwo, kuhlanganisa kodwa kungagcini kunoma yiziphi iziqinisekiso ezisikiselwayo zokuthengiselana, ukufaneleka kwenjongo ethile, noma ukungaphuli umthetho. I-Unitronics ayithwesi icala ngamaphutha noma ukweqiwa kolwazi olwethulwe kulo mbhalo. Akukho mcimbi lapho i-Unitronics izobophezeleka khona nganoma yimuphi umonakalo okhethekile, wengozi, ongaqondile noma umphumela wanoma yiluphi uhlobo, noma yimuphi umonakalo ovela ngenxa noma ohlobene nokusetshenziswa noma ukwenziwa kwalolu lwazi. Amagama okuhweba, izimpawu zokuhweba, amalogo kanye nezimpawu zesevisi ezivezwe kulo mbhalo, kuhlanganisa nokwakheka kwazo, kuyimpahla ye-Unitronics (1989) (R”G) Ltd. noma ezinye izinkampani zangaphandle futhi awuvunyelwe ukuzisebenzisa ngaphandle kwemvume ebhalwe ngaphambili. ze-Unitronics noma umuntu wesithathu ongase abe ngabanikazi bazo
Amadokhumenti / Izinsiza
 |
unitronics IO-AO6X Input-Output Expansion Module [pdf] Umhlahlandlela Womsebenzisi I-IO-AO6X Input-Output Expansion Module, IO-AO6X, Input-Output Expansion Module, Output Expansion Module, Expansion Module, Module |
