unitronics IO-AO6X Igalelo-Isiphumo Ukwandiswa kweModyuli
6 Iziphumo ezikwanti zeAnalog
IO-AO6X yiModyuli yoKwandiswa kwe-I/O enokusetyenziswa ngokubambisana nabalawuli be-Unitronics OPLC. Imodyuli inikeza i-6 12-bit iziphumo ezizimeleyo; ukusebenza kwi-0-10V, 0-20mA, kunye ne-4-20mA. Ujongano phakathi kwemodyuli kunye ne-OPLC ibonelelwa yiadaptha. Imodyuli inokuthi ifakwe ngokukhawuleza kwi-DIN kaloliwe, okanye igxunyekwe ngesijirufu kwi-mounting plate.
| Ukuchongwa kwelungu | |
| 1 | Isinxibelelanisi semodyuli ukuya kwimodyuli |
| 2 | Isalathisi senqanaba lonxibelelwano |
| 3 | Isalathisi sobonelelo lwamandla salodwa |
| 4 | Amanqaku oqhagamshelwano lwemveliso, AO4-AO5 |
| 5 | Amanqaku oqhagamshelwano lwamandla |
| unikezelo kwiyunithi ye-analog | |
| 6 | Imodyuli-ukuya-kwimodyuli yesiqhagamshelo sezibuko |
| 7 | Amanqaku oqhagamshelwano lwemveliso, AO0-AO3 |
- Ngaphambi kokusebenzisa le mveliso, luxanduva lomsebenzisi ukufunda nokuqonda olu xwebhu kunye nawaphi na amaxwebhu akhaphayo.
- Zonke exampIiles kunye nemizobo eboniswe apha yenzelwe ukunceda ukuqonda, kwaye ayiqinisekisi ukusebenza. I-Unitronics ayilwamkeli uxanduva lokusetyenziswa kokwenene kwale mveliso ngokusekelwe kwezi examples.
- Nceda ulahle le mveliso ngokuhambelana nemigangatho kunye nemimiselo yendawo kunye neyesizwe.
- Kuphela ngabasebenzi benkonzo abaqeqeshiweyo ekufuneka basivule esi sixhobo okanye basilungise.
Ukhuseleko lomsebenzisi kunye nezikhokelo zokukhusela izixhobo
Olu xwebhu lujolise ekuncedeni abasebenzi abaqeqeshiweyo nabanobuchule ekufakeni esi sixhobo njengoko kuchazwa yimiyalelo yaseYurophu koomatshini, ivolthi ephantsi.tage, kunye ne-EMC. Kuphela ligcisa okanye injineli eqeqeshwe kwimigangatho yombane yasekhaya neyesizwe ekufuneka yenze imisebenzi enxulumene neengcingo zombane zesixhobo. Iimpawu zisetyenziselwa ukuqaqambisa ulwazi olunxulumene nokhuseleko lomsebenzisi kunye nokhuseleko lwesixhobo kulo lonke olu xwebhu. Xa le miqondiso ibonakala, ulwazi olunxulumeneyo kufuneka lufundwe ngenyameko kwaye luqondwe ngokupheleleyo.
| Intsingiselo | Inkcazo |
| Ingozi | Ingozi echongiweyo ibangela umonakalo emzimbeni kunye nepropathi. |
| Isilumkiso | Ingozi echongiweyo inokubangela umonakalo emzimbeni kunye nepropathi. |
| Isilumkiso | Lumka. |
- Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukwenzakala kakhulu okanye umonakalo wepropati. Ngalo lonke ixesha sebenzisa inkathalo efanelekileyo xa usebenza ngezixhobo zombane
- Jonga inkqubo yomsebenzisi phambi kokuba uyiqhube.
- Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo.
- Faka i-breaker circuit yangaphandle kwaye uthathe amanyathelo afanelekileyo okhuseleko ngokuchasene ne-short-circuiting kwi-wiring yangaphandle.
- Ukunqanda ukonakalisa isixokelelwano, musa ukuqhagamshelwa/uqhawule uqhagamshelo isixhobo xa umbane uvuliwe.
Ukuqwalaselwa kokusingqongileyo
- Musa ukufaka kwiindawo ezine: uthuli olugqithisileyo okanye oluqhubekileyo, igesi edlayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka kwempembelelo rhoqo okanye ukungcangcazela okugqithisileyo.
- Shiya ubuncinane besithuba se-10mm sokungena komoya phakathi kweencam eziphezulu nezisezantsi zesixhobo kunye neendonga ezivaliweyo.
- Musa ukubeka emanzini okanye ukuvumela amanzi avuze kwiyunithi.
- Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo.
Ukunyuswa kweModyuli
DIN-umzila kaloliwe onyukayo
Cofa isixhobo kwi-DIN kaloliwe njengoko kubonisiwe ngezantsi; Imodyuli iya kubekwa ngokuthe tye kuloliwe weDIN.
Ukunyuswa kweScrew
Umfanekiso okwiphepha elilandelayo uzotywe kwisikali. Ingasetyenziswa njengesikhokelo sokunyusela isijirufu kwimodyuli. Uhlobo lwe-screw lokunyuka: nokuba yi-M3 okanye i-NC6-32.
Ukuqhagamshela iiModyuli zoKwandiswa
Iadaptha ibonelela ngojongano phakathi kwe-OPLC kunye nemodyuli yolwandiso. Ukuqhagamshela imodyuli ye-I/O kwiadaptha okanye kwenye imodyuli: Tyhiliza imodyuli ukuya kwimodyuli isidibanisi kwizibuko elibekwe kwicala lasekunene lesixhobo.
Phawula ukuba kukho ikepusi yokukhusela ebonelelwe ngeadaptha. Le cap igubungela i-port ye-modyuli ye-I / O yokugqibela kwinkqubo Ukuphepha ukulimaza inkqubo, musa ukuxhuma okanye ukukhupha ifowuni xa amandla evuliwe.
| Ukuchongwa kwelungu | |
| 1 | Isinxibelelanisi semodyuli ukuya kwimodyuli |
| 2 | Umnqwazi wokukhusela |
Iintambo
- Musa ukubamba iingcingo eziphilayo.
- Izikhonkwane ezingasetyenziswanga akufanele zidityaniswe. Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
- Musa ukuqhagamshela i-'Neutral okanye 'Layini' isignali ye-110/220VAC kwi-pin ye-0V yesixhobo.
- Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane
Iinkqubo zocingo
Sebenzisa iitheminali zecrimp kwi-wiring; sebenzisa i-26-12 AWG ucingo (0.13 mm 2-3.31 mm2) kuzo zonke iinjongo zocingo.
- Hlubula ucingo ukuya kubude be-7±0.5mm (0.250-0.300 intshi).
- Khulula i-terminal ukuya kwindawo yayo ebanzi phambi kokufaka ucingo.
- Faka ucingo ngokupheleleyo kwi-terminal ukuqinisekisa ukuba uqhagamshelwano olufanelekileyo lunokwenziwa.
- Qinisa ngokwaneleyo ukugcina ucingo lungatsali lukhululekile.
- Ukuze ugweme ukulimaza ucingo, ungadluli i-torque ephezulu ye-0.5 N · m (5 kgf·m).
- Musa ukusebenzisa itoti, i-solder, okanye nayiphi na enye into kucingo olukhutshiweyo olunokubangela ukuba umsonto wocingo uqhawuke.
- Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.
I/O Wiring—General
- Iingcingo zokufaka okanye eziphumayo akufuneki ziqhutywe ngentambo enye ye-multi-core okanye kwabelwane ngocingo olufanayo.
- Vumela umqulutagUkuwa kunye nokuphazamiseka kwengxolo kunye nemigca yegalelo esetyenziswa kumgama owandisiweyo. Sebenzisa ucingo olulinganiswe ngokufanelekileyo kumthwalo.
Iziphumo zeAnalog
- Izikhuselo kufuneka zifakwe emhlabeni, zixhunywe kumhlaba wekhabhinethi.
- Musa ukudibanisa iziphumo ezingasetyenziswanga.
- Imveliso inokutsalwa ukuba ibe yangoku okanye ivolthitage.
- Musa ukusebenzisa yangoku kunye voltage ukusuka kwijelo lomthombo ofanayo.
- Iimpawu ze-COM zeziphumo zifutshane ngaphakathi
| IO-AO6X Iinkcukacha zobuGcisa | |
| Max. ukusetyenziswa kwangoku | 32mA ubuninzi ukusuka kwi-5VDC ye-adapter |
| Ukusetyenziswa kwamandla okuqhelekileyo | 29mA @ 5VDC |
| Isalathisi semeko | |
| (BALEKA) | I-LED eluhlaza:
-Lit xa unxibelelwano lusekiwe phakathi kwemodyuli kunye ne-OPLC. —Iyaqhwanyaza xa unxibelelwano lusilela. |
| Isalathisi samandla esizimeleyo
(ISO. PWR) |
I-LED eluhlaza:
-Ilayitiwe xa umbane owahlukileyo ulayishiwe. |
| Ukubekwa wedwa | |
| Umjelo oya ebhasini | Ewe |
| Umjelo wokubonelela ngombane | Ewe |
| Umjelo ukuya kumjelo | Hayi |
| Iziphumo zeAnalog | |
| Inani leziphumo | 6 (isiphelo esinye) |
| Uluhlu lwemveliso | 0-10V, 0-20mA, 4-20mA. Jonga iNqaku lesi-1. |
| Isisombululo (ngaphandle kwe-4-20mA) Isisombululo kwi-4-20mA | 12-bit (4096 iiyunithi)
819 ukuya 4095 (3277 iiyunithi) |
| Layisha impedance | 1kΩ ubuncinci—voltage
500Ω ubukhulu—ngoku. Jonga iNqaku lesi-2. |
| Ixesha loguqulo | I-2 mSec, idityaniswe kunxibelelwano lolwandiso. |
| Impazamo yomgca | ±0.1% |
| Imida yempazamo yokusebenza | ±0.2% |
| Ubonelelo lwaMandla eAnalog | 24VDC |
| Uluhlu oluvumelekileyo | I-20.4 ukuya kwi-28.8VDC |
| Max. ukusetyenziswa kwangoku | 170mA@24VDC |
| Okusingqongileyo | IP20 / NEMA1 |
| Ubushushu bokusebenza | 0° ukuya ku-50°C (32 ukuya ku-122°F) |
| Ubushushu bokugcina | -20 ukuya ku-60°C (-4 ukuya ku-140°F) |
| Ukufuma okuzalanayo (RH) | 5% ukuya kwi-95% (engacondensing) |
| Imilinganiselo (WxHxD) | 80mm x 93mm x 60mm (3.15 x 3.66 x 2.362”) |
| Ubunzima | 159g (5.6oz.) |
| Ukunyuka | Nokuba ungene kwi-35mm ye-DIN kaloliwe okanye ugxunyekwe ngezikrufu. |
| Amanqaku: | |
| 1. Qaphela ukuba uluhlu lwe-I / O nganye luchazwe zombini nge-wiring kunye ne-software yomlawuli.
2. Xa i-analog output isetyenziselwe ukusebenzisa okwangoku, imveliso kufuneka idibaniswe ngaphambili amandla avuliwe. |
|
Ukujongana nee-I/Os kwiiModyuli zoKwandiswa
Amagalelo kunye neziphumo ezibekwe kwiimodyuli zokwandisa ze-I/O eziqhagamshelwe kwi-OPLC zinikwe iidilesi eziquka unobumba kunye nenombolo. Ileta ibonisa ukuba i-I/O ligalelo (I) okanye isiphumo (O). Inani libonisa indawo ye-I/O kwisistim. Eli nani linxulumene nendawo yokwandiswa kwemodyuli kwisistim, kunye nendawo ye-I/O kuloo modyuli. Iimodyuli zokwandiswa zibalwa ukusuka ku-0-7 njengoko kubonisiwe kumzobo ongezantsi.
Ifomula engezantsi isetyenziselwa ukwabela iidilesi zeemodyuli ze-I/O ezisetyenziswa ngokubambisana ne-M90 OPLC. X linani elimele indawo yemodyuli ethile (0-7). U-Y linani legalelo okanye imveliso kuloo modyuli ithile (0-15). Inani elimele indawo ka-I/O lilingana no: 32 + x • 16 + y
ExampLes
- Igalelo #3, elibekwe kwimodyuli yolwandiso #2 kwinkqubo, iya kuqwalaselwa njenge-67, 67 = 32 + 2 • 16 + 3
- Imveliso #4, ebekwe kwimodyuli yokwandisa #3 kwinkqubo, iya kulungiswa njenge-O 84, 84 = 32 + 3 • 16 + 4
I-EX90-DI8-RO8 yimodyuli ye-I/O ezimeleyo. Nangona imodyuli yodwa kuqwalaselo, i-EX90-DI8- RO8 isoloko inikwe inombolo 7. I-I / Os yayo ibhekiswe ngokufanelekileyo.
Example
Igalelo #5, elibekwe kwi-EX90-DI8-RO8 eqhagamshelwe kwi-M90 OPLC iya kulungiswa njengo-I 149, 149 = 32 + 7 • 16 + 5
Ukuthotyelwa kwe-UL
Ezi mveliso zidweliswe ngasentla zinokusetyenziswa nee-Unitronics PLCs ezihambelanayo. Izikhokelo zoFakelo oluneenkcukacha eziqulathe imizobo yeentambo ze-I/O kule mifuziselo, iinkcukacha zobugcisa, kunye namaxwebhu awongezelelweyo abekwe kwiThala leencwadi lobuGcisa kwi-Unitronics. webindawo: https://unitronicsplc.com/support-technical-library/
Eli candelo lilandelayo lifanelekile kwiimveliso ze-Unitronics ezidweliswe kunye ne-UL. Le mizekelo ilandelayo: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8, IO- I-DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X zi-UL zidweliswe kwiiNdawo ezinobungozi. Le mizekelo ilandelayo: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IO-AI4-AO2, IO-AI4-AO2-B, IO- I-AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-L, IO DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO- I-LC3, IO-PT4, IO-PT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X, EX-RC1 zi-UL ezidweliswe kwindawo eqhelekileyo. Imilinganiselo ye-UL, abalawuli abaCwangcisiweyo abaSebenzisa kwiiNdawo ezinobungozi, iKlasi yoku-I, iCandelo lesi-2, amaQela A, B, C kunye no-D La maNqaku okuKhululwa ahambelana nazo zonke iimveliso ze-Unitronics ezineempawu ze-UL ezisetyenziselwa ukuphawula iimveliso ezivunyiweyo ukuba zisetyenziswe ezinobungozi. iindawo, iKlasi I, iCandelo 2, Amaqela A, B, C kunye no-D.
Isilumkiso
- ◼Esi sixhobo sikulungele ukusetyenziswa kwiKlasi I, iCandelo 2, iQela A, B, C no-D, okanye kwiindawo eziNgenabungozi kuphela.
- I-input kunye ne-output wiring kufuneka ihambelane neKlasi I, iCandelo le-2 iindlela zocingo kunye nokuhambelana negunya elinegunya.
- ISILUMKISO-Ingozi yoDubulo-ukutshintshwa kwamalungu kunokuphazamisa ukufaneleka kwiKlasi yoku-I, iCandelo lesi-2.
- ISILUMKISO – INGOZI YOKUQHUBEKA – Musa ukudibanisa okanye ukuqhawula izixhobo ngaphandle kokuba umbane ucinyiwe okanye indawo leyo yaziwa ngokuba ayinabungozi.
- ISILUMKISO – Ukuvezwa kwezinye iikhemikhali kungonakalisa iipropathi zokutywina zezinto ezisetyenziswa kwiiRelays.
- Esi sixhobo kufuneka sifakwe kusetyenziswa iindlela zocingo njengoko zifuneka kwiKlasi I, iCandelo 2 ngokwe-NEC kunye / okanye i-CEC.
Relay Output Resistance Ratings
Iimveliso ezidweliswe apha ngezantsi ziqulethe iziphumo zokudluliselwa: Iimodyuli zokungeniswa / imveliso yokwandisa, Iimodeli: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L Xa ezi mveliso zikhethekileyo zisetyenziselwa kwiindawo ezinobungozi, zilinganiswe kwi-3A res, xa ezi mveliso zikhethekileyo zisetyenziswe kwiimeko ezingekho yingozi, zilinganiswe kwi-5A res, njengoko zinikwe kwiinkcukacha zemveliso.
Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ngokubona kwayo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, ukuyila, izixhobo kunye nezinye iinkcukacha zeemveliso zayo, kwaye mhlawumbi ngokusisigxina okanye okwethutyana Ukushiya kwimarike. Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungonaki. I-Unitronics ayithathi xanduva ngeempazamo okanye ukushiyeka kulwazi olunikwe kolu xwebhu. Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi. Amagama orhwebo, iimpawu zentengiso, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kuquka noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye akuvumelekanga ukuzisebenzisa ngaphandle kwemvume ebhaliweyo kwangaphambili. yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo
Amaxwebhu / Izibonelelo
 |
unitronics IO-AO6X Igalelo-Isiphumo Ukwandiswa kweModyuli [pdf] Isikhokelo somsebenzisi IO-AO6X Input-Output Expansion Module, IO-AO6X, Input-Output Expansion Module, Output Expansion Module, Imodyuli yoKwandiswa, imodyuli |
