Unitronics IO-AO6X Input-Output Expansion Module

6 Keɓaɓɓen Abubuwan Analog

IO-AO6X Module Fadada I/O ne wanda za'a iya amfani dashi tare da takamaiman masu kula da Unitronics OPLC. Tsarin yana ba da abubuwan keɓancewa na 6 12-bit; aiki a 0-10V, 0-20mA, da 4-20mA. Ana samar da hanyar sadarwa tsakanin module da OPLC ta hanyar adaftar. Za a iya ɗora wannan ƙirar a kan layin dogo na DIN, ko kuma a ɗora dunƙule a kan faranti mai hawa.

	Gane bangaren
1	Module-zuwa-module mai haɗawa
2	Alamar halin sadarwa
3	Keɓewar mai nuna wutar lantarki
4	Abubuwan haɗin da aka fitar, AO4-AO5
5	Abubuwan haɗi don iko
	wadata naúrar analog
6	Module-zuwa-module mai haɗa tashar jiragen ruwa
7	Abubuwan haɗin da aka fitar, AO0-AO3

• Kafin amfani da wannan samfur, alhakin mai amfani ne ya karanta da fahimtar wannan daftarin aiki da duk wani takaddun da ke biye.
• Duk examples da zane-zane da aka nuna a nan an yi su ne don taimakawa fahimta, kuma ba su da garantin aiki. Unitronics ba ya karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples.
• Da fatan za a zubar da wannan samfurin daidai da ƙa'idodi da ƙa'idodi na gida da na ƙasa.
• ƙwararrun ma'aikatan sabis ne kawai ya kamata su buɗe wannan na'urar ko su yi gyara.

Tsaron mai amfani da jagororin kariyar kayan aiki
Wannan takarda an yi niyya ne don taimaka wa ƙwararrun ƙwararrun ma'aikata a cikin shigar da wannan kayan aikin kamar yadda umarnin Turai na injiniyoyi suka ayyana, low vol.tage, da EMC. Mai fasaha ko injiniya ne kawai wanda ya horar da ma'aunin lantarki na gida da na ƙasa ya kamata ya yi ayyukan da ke da alaƙa da na'urar lantarki. Ana amfani da alamomin don haskaka bayanan da suka shafi amincin mai amfani da kariyar kayan aiki a cikin wannan takaddar. Lokacin da waɗannan alamomin suka bayyana, dole ne a karanta bayanan haɗin gwiwa a hankali kuma a fahimce su sosai.

Ma'ana	Bayani
hadari	Hadarin da aka gano yana haifar da lalacewar jiki da ta dukiya.
Gargadi	Hatsarin da aka gano na iya haifar da lalacewar jiki da ta dukiya.
Tsanaki	Yi amfani da hankali.

• Rashin bin ƙa'idodin aminci masu dacewa na iya haifar da mummunan rauni na mutum ko lalacewar dukiya. Koyaushe yi taka tsantsan yayin aiki da kayan lantarki
• Bincika shirin mai amfani kafin gudanar da shi.
• Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini.
• Shigar da na'urar da'ira ta waje kuma ɗauki matakan tsaro masu dacewa game da gajeriyar kewayawa a cikin wayoyi na waje.
• Don guje wa lalata tsarin, kar a haɗa / cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli

• Kar a sanyawa a cikin wuraren da: ƙura mai wuce gona da iri, gurɓataccen iskar gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza ta yau da kullun ko firgita.
• Bar mafi ƙarancin sarari na 10mm don samun iska tsakanin saman sama da gefen ƙasa na na'urar da bangon shinge.
• Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
• Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.

Hawan Module

DIN-dogo hawa
Dauke na'urar a kan layin dogo na DIN kamar yadda aka nuna a ƙasa; Module ɗin zai kasance daidai a kan layin dogo na DIN.

Screw-Mounting
An zana adadi a shafi na gaba zuwa ma'auni. Ana iya amfani da shi azaman jagora don dunƙule-hawan module. Nau'in hawa dunƙule: ko dai M3 ko NC6-32.

Haɗa Modulolin Faɗawa

Adafta yana ba da haɗin kai tsakanin OPLC da tsarin haɓakawa. Don haɗa na'urar I/O zuwa adaftar ko zuwa wani module: Tura mai haɗa module-zuwa-module cikin tashar jiragen ruwa dake gefen dama na na'urar.

Lura cewa akwai hular kariya da aka tanada tare da adaftan. Wannan hular tana rufe tashar tashar I/O na ƙarshe a cikin tsarin Don guje wa lalata tsarin, kar a haɗa ko cire haɗin na'urar lokacin da wutar ke kunne.

Gane bangaren
1	Module-zuwa-module mai haɗawa
2	hular kariya

Waya

• Kar a taɓa wayoyi masu rai.
• Kada a haɗa fil ɗin da ba a yi amfani da shi ba. Yin watsi da wannan umarnin na iya lalata na'urar.
• Kar a haɗa siginar 'Neutral ko' Layi' na 110/220VAC zuwa fil ɗin 0V na na'urar.
• Bincika duk wayoyi sau biyu kafin kunna wutar lantarki

Hanyoyin Waya
Yi amfani da crimp tashoshi don wayoyi; yi amfani da 26-12 AWG waya (0.13 mm 2-3.31 mm2) don duk dalilai na wayoyi.

1. Cire waya zuwa tsayin 7± 0.5mm (0.250-0.300 inci).
2. Cire tashar zuwa mafi girman matsayi kafin saka waya.
3. Saka waya gaba daya a cikin tashar don tabbatar da cewa za a iya yin haɗin da ya dace.
4. Maƙarƙashiya don kiyaye waya daga ja kyauta.
   1. Don guje wa lalata waya, kar a wuce iyakar ƙarfin 0.5 N·m (5 kgf·m).
   2. Kada a yi amfani da gwangwani, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
   3. Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.

I/O Wiring — Gabaɗaya

• Bai kamata a yi amfani da igiyoyin shigarwa ko fitarwa ta hanyar kebul mai mahimmanci iri ɗaya ko raba waya ɗaya ba.
• Bada izinin voltage digo da tsangwama amo tare da layukan shigarwa da aka yi amfani da su akan nisa mai nisa. Yi amfani da waya wanda yayi daidai da girman nauyin kaya.

Abubuwan Analog

• Ya kamata a sanya garkuwar ƙasa, an haɗa su da ƙasan majalisar.
• Kar a haɗa abubuwan da ba a yi amfani da su ba.
• Ana iya haɗa fitarwa zuwa ko dai halin yanzu ko voltage.
• Kar a yi amfani da halin yanzu da voltage daga tashar tushen guda ɗaya.
• Abubuwan da aka fitar' COM an gajarta a ciki

IO-AO6X Ƙayyadaddun Fasaha
Max. amfani na yanzu	Matsakaicin 32mA daga adaftar 5VDC
Yawan amfani da wutar lantarki	29mA @ 5VDC
Alamar matsayi
(RUN)	Green LED: -Lit lokacin da aka kafa hanyar sadarwa tsakanin module da OPLC. -Kyafta ido lokacin da hanyar sadarwar ta gaza.
Mai nuna ikon keɓe (ISO. PWR)	Green LED: - Kunna lokacin da keɓantaccen wutar lantarki ke kunne.
Kaɗaici
Channel zuwa bas	Ee
Channel zuwa samar da wutar lantarki	Ee
Channel zuwa channel	A'a
Abubuwan Analog
Yawan abubuwan da aka fitar	6 (mai ƙarewa ɗaya)
Kewayon fitarwa	0-10V, 0-20mA, 4-20mA. Duba bayanin kula 1.
Resolution (sai dai a 4-20mA) Ƙimar a 4-20mA	12-bit (raka'a 4096) 819 zuwa 4095 (raka'a 3277)
Load impedance	1kΩ mafi ƙarancin—voltage Matsakaicin 500Ω — na yanzu. Duba bayanin kula 2.
Lokacin juyawa	2 mSec, aiki tare da fadada sadarwa.
Kuskuren layi	± 0.1%
Iyakar kuskuren aiki	± 0.2%
Analog Power Supply	Saukewa: 24VDC
Kewayon halatta	20.4 zuwa 28.8VDC
Max. amfani na yanzu	170mA @ 24VDC
Muhalli	IP20/NEMA1
Yanayin aiki	0° zuwa 50°C (32 zuwa 122°F)
Yanayin ajiya	-20° zuwa 60°C (-4 zuwa 140°F)
Dangantakar Humidity (RH)	5% zuwa 95% (ba mai tauri)
Girma (WxHxD)	80mm x 93mm x 60mm (3.15 x 3.66 x 2.362")
Nauyi	159g (5.6oz.)
Yin hawa	Ko dai a kan dogo na 35mm DIN-dogon ko mai dunƙulewa.
Bayanan kula:
1. Lura cewa kewayon kowane I/O an ayyana su ta hanyar wayoyi da kuma cikin software na mai sarrafawa. 2. Lokacin da aka saita fitarwa na analog don amfani da halin yanzu, dole ne a haɗa abin fitarwa kafin an kunna wuta.

Yin jawabi I/Os akan Modulolin Faɗawa

Abubuwan shigarwa da abubuwan da aka fitar da ke kan na'urorin haɓaka I/O waɗanda ke haɗe da OPLC ana sanya adiresoshin da suka ƙunshi harafi da lamba. Harafin yana nuna ko I/O shigarwar (I) ne ko fitarwa (O). Lambar tana nuna wurin I/O a cikin tsarin. Wannan lambar tana da alaƙa da duka matsayi na ƙirar haɓakawa a cikin tsarin, da kuma matsayin I / O akan wannan rukunin. Ana ƙidaya nau'ikan haɓakawa daga 0-7 kamar yadda aka nuna a cikin adadi na ƙasa.

Ana amfani da dabarar da ke ƙasa don sanya adiresoshin I/O modules da aka yi amfani da su tare da M90 OPLC. X shine lambar da ke wakiltar takamaiman wurin ƙirar (0-7). Y shine adadin shigarwar ko fitarwa akan wannan ƙayyadaddun tsarin (0-15). Lambar da ke wakiltar wurin I/O daidai yake da: 32 + x • 16 + y

Examples

• Input #3, wanda ke kan tsarin haɓakawa #2 a cikin tsarin, za a yi magana da shi kamar yadda I 67, 67 = 32 + 2 • 16 + 3
• Fitowa #4, wanda ke kan tsarin haɓakawa #3 a cikin tsarin, za a yi magana da shi azaman O 84, 84 = 32 + 3 • 16 + 4

EX90-DI8-RO8 shine tsarin I/O mai tsaye. Ko da shi ne kawai module a cikin sanyi, EX90-DI8- RO8 koyaushe ana sanya lamba 7. Ana magance I / Os daidai.

Example
Shigarwar #5, wacce ke kan EX90-DI8-RO8 da aka haɗa da M90 OPLC za a yi magana da ita kamar yadda I 149, 149 = 32 + 7 • 16 + 5

Farashin UL

Ana iya amfani da samfuran da aka jera a sama tare da masu dacewa da Unitronics PLCs. Cikakkun jagororin shigarwa waɗanda ke ƙunshe da zane-zanen wayoyi na I/O don waɗannan samfuran, ƙayyadaddun fasaha, da ƙarin takaddun suna cikin Laburaren Fasaha a cikin Unitronics. website: https://unitronicsplc.com/support-technical-library/
Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL. Samfura masu zuwa: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8, IO- DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X an jera UL don wurare masu haɗari. Samfura masu zuwa: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IO-AI4-AO2, IO-AI4-AO2-B, IO- AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-LI, IO- DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO- LC3, IO-PT4, IO-PT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X, EX-RC1 sune UL da aka jera don Wuri na Musamman. Ƙididdigar UL, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu Haɗari, Class I, Division 2, Rukunin A, B, C da D Waɗannan Bayanan Bayanan sun shafi duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani da su cikin haɗari. wurare, Class I, Division 2, Rukunin A, B, C da D.

Tsanaki

• ◼Wannan kayan aikin sun dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wuraren da ba masu haɗari kawai.
• Wayoyin shigarwa da fitarwa dole ne su kasance daidai da Class I, hanyoyin wayoyi na Division 2 kuma daidai da ikon da ke da iko.
• GARGADI-Hazarar fashewa-masanin abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
• GARGADI – HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
• GARGADI - Bayyanawa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
• Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.

Ƙimar Juriya na Relay
Samfuran da aka jera a ƙasa sun ƙunshi abubuwan da aka fitar: Input/Fit extension modules, Model: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L Lokacin da aka yi amfani da waɗannan takamaiman samfuran a wurare masu haɗari, ana ƙididdige su. a 3A res, lokacin da aka yi amfani da waɗannan takamaiman samfuran a cikin yanayin muhalli marasa haɗari, ana ƙididdige su a 5A res, kamar yadda aka bayar a cikin ƙayyadaddun samfurin.

Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci janye kowane daga cikinsu. da forgoing daga kasuwa. Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyanawa ko bayyananne, gami da amma ba'a iyakance ga kowane garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanin da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin. Sunayen kasuwanci, alamun kasuwanci, tambura da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izini na farko ba. na Unitronics ko wani ɓangare na uku wanda zai iya mallake su

Takardu / Albarkatu

Unitronics IO-AO6X Input-Output Expansion Module [pdf] Jagorar mai amfani IO-AO6X Ƙaddamarwar Fitar da Fitarwa, IO-AO6X.

Magana

• Manual mai amfani