ESPRESSIF SYSTEMS ESP8684-WROOM-060 ESP32 C2 Imojula

Imininingwane Yomkhiqizo

• Imodeli: ESP8684-WROOM-06C
• Ukuxhumana okungenantambo: I-Wi-Fi ne-Bluetooth LE
• Izinketho zokukhweza: I-Reflow soldering noma i-wave soldering
• Ama-GPIO: 14 etholakala endaweni ephakemeyo, 5 etholakala endaweni eqondile
• I-Antenna: I-antenna ye-PCB esebhodini

Imiyalo yokusetshenziswa komkhiqizo

Qalisa

Okudingayo
Qinisekisa ukuthi unemojula ye-ESP8684-WROOM-06C, amathuluzi okuthuthukisa adingekayo, kanye nebhodi le-PCB elihambisanayo.

I-Hardware Connection
Xhuma imojuli ebhodini le-PCB ngokulandela ukwakheka kwephinikhodi njengoba kushiwo kumininingwane yedatha.

Setha i-Development Environment

1. Faka Okudingekayo: Faka amathuluzi esofthiwe adingekayo nemitapo yolwazi.
2. Thola i-ESP-IDF: Landa i-ESP-IDF (Espressif IoT Development Framework).
3. Setha Amathuluzi: Lungiselela amathuluzi okuthuthukisa ohlelo.
4. Setha Okuguquguqukayo Kwendawo: Setha okuguquguqukayo kwemvelo okudingekayo kwemvelo yokuthuthukiswa.

Dala Iphrojekthi Yakho Yokuqala

Qala iphrojekthi
Dala iphrojekthi entsha endaweni yakho yokuthuthuka.

Xhuma idivayisi yakho
Sungula ukuxhumana phakathi kwendawo yakho yokuthuthuka kanye nemojuli ye-ESP8684-WROOM-06C.

Lungiselela
Lungiselela izilungiselelo zephrojekthi kanye nemingcele ngokwezidingo zakho.

Yakha Iphrojekthi
Hlanganisa iphrojekthi ukuze ukhiqize isithombe se-firmware.

Flash kuDivayisi
Flash i-firmware ehlanganisiwe kumojula ye-ESP8684-WROOM-06C.

Gada
Gada ukuziphatha kwedivayisi nokukhiphayo ngezinjongo zokuhlola nokulungisa iphutha.

I-Module Overview

Izici

I-CPU ne-On-Chip Memory

• ESP8684H2 noma ESP8684H4 eshumekiwe, 32-bit RISC-V single-core processor, kufika ku-120 MHz
• 576 KB ROM
• 272 KB SRAM (16 KB yenqolobane)
• I-flash engaphakathi kwephakheji (bona imininingwane kuThebula 1 ESP8684-WROOM-06C Series Ukuqhathanisa)
• Ukufinyelela ku-flash kusheshiswa yinqolobane
• Isekela i-flash in-circuit Programming (ICP)

I-Wi-Fi

• I-IEEE 802.11 b/g/n-iyahambisana
• Ibanga lefrikhwensi emaphakathi yesiteshi esisebenzayo:
  2412 ~ ​​2462 MHz
• Isekela umkhawulokudonsa ongu-20 MHz ebhendini engu-2.4 GHz
• Imodi ye-1T1R enezinga ledatha elingafika ku-72.2 Mbps
• I-Wi-Fi Multimedia (WMM)
• TX/RX A-MPDU, TX/RX A-MSDU
• Ngokushesha Vimba ACK
• Ukuhlukaniswa nokuhlukaniswa
• Ithuba lokudlulisa (TXOP)
• Ukuqapha kwe-Beacon okuzenzakalelayo (i-hardware TSF)
• 3 × izixhumanisi ezibonakalayo ze-Wi-Fi
• Ukusekelwa kanyekanye Kwengqalasizinda ye-BSS kumodi Yesiteshi, Imodi ye-SoftAP, Imodi Yesiteshi + SoftAP, kanye nemodi yokuziphatha okubi
  Qaphela ukuthi uma uchungechunge lwe-ESP8684 luskena kumodi yesiteshi, isiteshi seSoftAP sizoshintsha kanye nesiteshi Sesiteshi.

I-Bluetooth®

• I-Bluetooth LE: I-Bluetooth 5.3 iqinisekisiwe
• Imodi yamandla aphezulu (20 dBm)
• Isivinini: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps
• Izandiso zokukhangisa
• Amasethi ezikhangiso amaningi
• I-algorithm yokukhetha isiteshi #2
• Indlela yokuphilisana kwangaphakathi phakathi kwe-Wi-Fi ne-Bluetooth ukwabelana ngothi olufanayo

Amapheripheral
I-GPIO, i-SPI, i-UART, i-I2C, isilawuli se-LED PWM, isilawuli se-DMA esijwayelekile, inzwa yezinga lokushisa, i-SAR ADC, izibali sikhathi, ne-watchdog
Qaphela:
* Sicela ubheke I-ESP8684 Series Datasheet ukuze uthole ulwazi oluningiliziwe mayelana nama-peripheral module.

Izingxenye Ezihlanganisiwe Kumojuli
26 MHz crystal oscillator

Izinketho ze-Antenna
I-antenna ye-PCB esebhodini

Izimo zokusebenza

• I-vol esebenzayotagI-e/Power supply: 3.0 ~ 3.6V
• Izinga lokushisa le-ambient elisebenzayo: -40 ~ 105 °C

Isitifiketi

• Isitifiketi se-Bluetooth: I-BQB
• Isitifiketi esiluhlaza: RoHS/REACH

Isivivinyo
I-HTOL/HTSL/uHAST/TCT/ESD/Latch-up

Incazelo

• I-ESP8684-WROOM-06C inamandla, i-Wi-Fi ejwayelekile kanye nemojuli ye-Bluetooth LE. Le mojula iyinketho efanelekile yamakhaya ahlakaniphile, i-automation yezimboni, ukunakekelwa kwezempilo, ama-electronics abathengi, njll.
• I-ESP8684-WROOM-06C ingafakwa phezu kwebhodi le-PCB ngokusebenzisa i-reflow soldering noma ithengiswe ngokuqondile ebhodini le-PCB ngokusebenzisa i-wave soldering. Lapho ingaphezulu ifakwe, imojula inama-GPIO ayi-14 atholakalayo; uma ithengiswe iqonde phezulu, imojula inama-GPIO angu-5 atholakalayo.
• I-ESP8684-WROOM-06C iza nothi lwe-PCB olusebhodini.
• Ukuqhathaniswa kochungechunge lwe-ESP8684-WROOM-06C imi kanje:
  

  Ikhodi yoku-oda	I-flash engaphakathi kwephakheji	I-Ambient Temp.1 (°C)	Usayizi (mm)
  ESP8684-WROOM-06C-H2	2 MB	- 40 ~ 105	15.8 × 20.3 × 2.7
  ESP8684-WROOM-06C-H4	4 MB

  Izinga lokushisa le-ambient licacisa ibanga lokushisa elinconyiwe lendawo ngokushesha ngaphandle kwemojula ye-Espressif.

• I-chip ye-ESP8684H2 kanye ne-ESP8684H4 chip ziwela esigabeni esifanayo, okuyi-ESP8684 chip series.
• Uchungechunge lwe-ESP8684 lwama-chips lune-32-bit RISC-V single-core processor. Bahlanganisa isethi ecebile yama-peripherals, okuhlanganisa i-UART, I2C, isilawuli se-LED PWM, isilawuli esijwayelekile se-DMA, inzwa yokushisa, i-SAR ADC, njll.
  Qaphela:
  * Ukuze uthole ulwazi olwengeziwe nge-chip ye-ESP8684, sicela ubhekisele ku-ESP8684 Series Datasheet.

Phina Izincazelo

Ukuhlelwa Kwephini
Umdwebo wephinikhodi ongezansi ubonisa cishe indawo yamaphini kumojula.

Phina Incazelo

• Imojula inamaphini angu-22. Bona izincazelo zephinikhodi kuThebula 2, Izincazelo zephini.
• Ukuze uthole ukulungiselelwa kwephinikhodi, sicela ubheke I-ESP8684 Series Datasheet.
  

  Igama	Cha.	Uhlobo1	Umsebenzi
  IO1	1	I/O/T	I-GPIO1, ADC1_CH1
  IO2	2	I/O/T	GPIO2, ADC1_CH2, FSPIQ
  NC	3	—	NC
  NC	4	—	NC
  IO0	5	I/O/T	I-GPIO0, ADC1_CH0
  RX0	6	I/O/T	I-GPIO19, U0RXD
  TX0	7	I/O/T	I-GPIO20, U0TXD
  IO3	8	I/O/T	GPIO3, ADC1_CH3, LED PWM
  IO7	9	I/O/T	GPIO7, FSPID, MTDO, LED PWM
  IO6	10	I/O/T	GPIO6, FSPICLK, MTCK, LED PWM
  IO4	11	I/O/T	GPIO4, ADC1_CH4, FSPIHD, MMS, LED PWM
  IO5	12	I/O/T	GPIO5, FSPIWP, MTDI, LED PWM
  GND	13	P	Ground
  3V3	14	P	Ukunikezwa kwamandla kagesi
  IO18	15	I/O/T	I-GPIO18
  IO10	16	I/O/T	GPIO10, FSPICS0
  NC	17	—	NC
  EN	18	I	Phezulu: Eyodwa inika amandla i-chip. Phansi: icishiwe, I-chip ivala amandla. Okuzenzakalelayo: kudonswe ngaphakathi.
  NC	19	—	NC
  IO9 2	20	I/O/T	I-GPIO9
  IO8	21	I/O/T	I-GPIO8
  I-EPAD	22	P	Ground

  1. P: ukunikezwa kwamandla; I: okokufaka; O: okukhiphayo; T: impedance ephezulu.
  2. Le phinikhodi ingasetshenziswa njengendawo yokuhlola.
     Qaphela:
     IO0, IO1, IO3, kanye nezikhonkwane ze-IO5/MTDI zinamaphutha ezinga eliphansi ngesikhathi sokuqinisa i-chip. Bheka imininingwane esigabeni esithi Okokufaka Kwenjongo Okujwayelekile / Isixhumi esibonakalayo sokukhipha (GPIO) se-ESP8684 Series Datasheet.

Qalisa

Okudingayo
Ukwakha izinhlelo zokusebenza zemojuli, udinga:

• 1 x ESP8684-WROOM-06C
• 1 x Ibhodi lokuhlola le-Espressif RF
• 1 x ibhodi le-USB-to-Serial
• 1 x Ikhebula le-Micro-USB
• 1 x I-PC esebenzisa i-Linux
  Kulo mhlahlandlela womsebenzisi, sithatha isistimu yokusebenza ye-Linux njengesiboneloample. Ukuze uthole ulwazi olwengeziwe mayelana nokucushwa ku-Windows ne-macOS, sicela ubheke Umhlahlandlela Wokuhlela we-ESP-IDF.

I-Hardware Connection

1. Solder imojuli ye-ESP8684-WROOM-06C ebhodini lokuhlola le-RF njengoba kuboniswe kuMfanekiso 2.

   

2. Xhuma ibhodi lokuhlola le-RF ebhodini le-USB-to-Serial nge-TXD, RXD, ne-GND.
3. Xhuma ibhodi le-USB-to-Serial ku-PC.
4. Xhuma ibhodi lokuhlola le-RF ku-PC noma i-adaptha yamandla ukuze unike amandla amandla angu-5 V ngekhebula le-Micro-USB.
5. Ngesikhathi sokulanda, xhuma i-IO0 ku-GND usebenzisa i-jumper. Bese, uvula "VULA" ibhodi lokuhlola.
6. Landa i-firmware ku-flash. Ukuze uthole imininingwane, bheka izigaba ezingezansi.
7. Ngemva kokulanda, susa i-jumper ku-IO0 naku-GND.
8. Nika amandla ibhodi lokuhlola le-RF futhi. Imojuli izoshintshela kumodi yokusebenza. I-chip izofunda izinhlelo kusuka ku-flash lapho iqaliswa.
   Qaphela:
   I-IO0 inengqondo yangaphakathi iphakeme. Uma i-IO0 isethelwe ukudonsa, i-Boot mode iyakhethwa. Uma leli phini lidonselwa phansi noma lishiywe lintanta, imodi yokulanda iyakhethwa. Ukuze uthole ulwazi olwengeziwe nge-ESP8684-WROOM-06C, sicela ubheke I-ESP8684 Series Datasheet.

Setha i-Development Environment

I-Espressif IoT Development Framework (i-ESP-IDF ngamafuphi) iwuhlaka lokuthuthukisa izinhlelo zokusebenza ezisekelwe ku-Espressif ESP32. Abasebenzisi bangathuthukisa izinhlelo zokusebenza nge-ESP8684 ku-Windows/Linux/macOS ngokusekelwe ku-ESP-IDF. Lapha sithatha isistimu yokusebenza ye-Linux njenge-example.

Faka okudingekayo
Ukuze uhlanganise ne-ESP-IDF, udinga ukuthola amaphakheji alandelayo:

• I-CentOS 7 & 8:
  
• Ubuntu & Debian:
  
• I-Arch:
  
  Qaphela:
  • Lo mhlahlandlela usebenzisa uhla lwemibhalo ~/esp ku-Linux njengefolda yokufaka ye-ESP-IDF.
  • Khumbula ukuthi i-ESP-IDF ayisekeli izikhala ezindleleni.

Thola i-ESP-IDF

• Ukuze wakhe izinhlelo zokusebenza zemojula ye-ESP8684-WROOM-06C, udinga amalabhulali esofthiwe ahlinzekwe yi-Espressif endaweni ye-ESP-IDF.
• Ukuze uthole i-ESP-IDF, dala inkomba yokufaka (~/esp) ukuze ulande i-ESP-IDF futhi uhlanganise indawo yokugcina nge-'git clone':

  

• I-ESP-IDF izolandwa kokuthi ~/esp/esp-idf. Bheka Izinguqulo ze-ESP-IDF ukuze uthole ulwazi mayelana nokuthi iyiphi inguqulo ye-ESP-IDF ongayisebenzisa esimweni esithile.

Setha Amathuluzi
Ngaphandle kwe-ESP-IDF, udinga futhi ukufaka amathuluzi asetshenziswa i-ESP-IDF, njenge-compiler, debugger, Python packages, njll. I-ESP-IDF inikeza iskripthi esiqanjwe ngokuthi 'install.sh' ukusiza ukusetha amathuluzi. ekuhambeni okukodwa.

Setha Okuguquguqukayo Kwemvelo
Amathuluzi afakiwe awakakangezwa kokuhluka kwemvelo ye-PATH. Ukwenza amathuluzi asetshenziswe emugqeni womyalo, okunye okuguquguqukayo kwendawo kufanele kusethwe. I-ESP-IDF inikeza esinye iskripthi,' export.sh', esenza lokho. Kutheminali lapho uzosebenzisa khona i-ESP-IDF, sebenzisa:

Manje konke sekumi ngomumo, ungakha iphrojekthi yakho yokuqala kumojula ye-ESP8684-WROOM-06C.

Dala Iphrojekthi Yakho Yokuqala

Qala iphrojekthi

• Manje usukulungele ukulungiselela isicelo sakho semojula ye-ESP8684-WROOM-06C. Ungaqala ngephrojekthi yokuqalisa/hello_world kusukela ku-exampLes directory in ESP-IDF.
• Kopisha ukuqalisa/hello_world ku-~/esp lwemibhalo:

  
• Kukhona uhla lwama-exampamaphrojekthi ku-exampLes directory in ESP-IDF. Ungakopisha noma iyiphi iphrojekthi ngendlela efanayo neyethulwe ngenhla bese uyiqhuba. Kungenzeka futhi ukwakha exampendaweni, ngaphandle kokuwakopisha kuqala.

Xhuma idivayisi yakho
Manje xhuma imojula yakho kukhompyutha bese ubheka ukuthi iyiphi imbobo ye-serial module ibonakala ngaphansi kwayo. Izimbobo ze-serial ku-Linux ziqala ngokuthi '/dev/tty' emagameni azo. Qalisa umyalo ongezansi izikhathi ezimbili, okokuqala ibhodi livuliwe, bese lixhunyiwe. Imbobo evela okwesibili yileyo oyidingayo:

Qaphela:
Gcina igama lembobo liseduze njengoba uzolidinga ezinyathelweni ezilandelayo.

Lungiselela

• Zulazulela kunkomba yakho ethi 'hello_world' kusuka ku-Isinyathelo 3.4.1. Qala Iphrojekthi, setha i-chip ye-ESP8684 njengethagethi, bese usebenzisa insiza yokumisa iphrojekthi 'menuconfig'.

  

• Ukusetha ithagethi nge-'idf.py set-target ESP8684' kufanele kwenziwe kanye, ngemva kokuvula iphrojekthi entsha. Uma ngabe iphrojekthi iqukethe izakhiwo ezikhona kanye nezilungiselelo, zizosulwa futhi ziqaliswe. Ithagethi ingase ilondolozwe kokuguquguquka kwemvelo ukuze weqe lesi sinyathelo sonke. Bona Ukukhetha Okuqondisiwe ukuze uthole ulwazi olwengeziwe.
• Uma izinyathelo ezedlule zenziwe ngendlela efanele, imenyu elandelayo ivela:

  

• Usebenzisa le menyu ukusetha okuguquguqukayo okuqondene nephrojekthi ethile, isb, igama lenethiwekhi ye-Wi-Fi nephasiwedi, isivinini sokucubungula, njll. Ukusetha iphrojekthi nge-menuconfig kungase kweqiwe kokuthi “hello_world”. Lesi example izosebenza nokucushwa okuzenzakalelayo.
• Imibala yemenyu ingase yehluke kutheminali yakho. Ungashintsha ukubukeka ngenketho ethi '-̉-style'̉. Sicela usebenzise okuthi 'idf.py menuconfig -̉-help'̉ ukuze uthole ulwazi olwengeziwe.

Yakha Iphrojekthi

• Yakha iphrojekthi ngokwenza:

  
• Lo myalo uzohlanganisa uhlelo lokusebenza nazo zonke izingxenye ze-ESP-IDF, bese ukhiqiza i-bootloader, ithebula lokuhlukanisa, namabhanari wohlelo lokusebenza.

  

• Uma engekho amaphutha, ukwakhiwa kuzoqeda ngokukhiqiza ibhini ye-firmware .bin file.

Flash kuDivayisi

• Flash okombambambili osanda kukwakha kumojula yakho ngokuqalisa:

  
• Faka esikhundleni i-PORT ngegama lembobo yebhodi le-ESP8684 yakho kusuka ku-Isinyathelo: Xhuma Idivayisi Yakho.
• Ungakwazi futhi ukushintsha izinga le-baud elikhanyayo ngokufaka esikhundleni se-BAUD ngezinga le-baud olidingayo. Izinga le-baud elizenzakalelayo lingu-460800.
• Ukuze uthole ulwazi olwengeziwe mayelana nezimpikiswano ze-idf.py, bheka idf.py.
  Qaphela:
  Inketho ethi 'flash' yakha futhi ikhanyise iphrojekthi ngokuzenzakalelayo, ngakho-ke ukusebenzisa 'idf.py build' akudingekile.
• Lapho ukhanyisa, uzobona ilogi yokuphuma efana nokulandelayo:

  

• Uma zingekho izinkinga ekupheleni kwenqubo ye-flash, ibhodi lizoqala kabusha futhi liqalise uhlelo lokusebenza lwe-"hello_world".

Gada

• Ukuhlola ukuthi i-“hello_world” iyasebenza ngempela yini, thayipha okuthi 'idf.py -p PORT monitor' (Ungakhohlwa ukushintsha i-PORT ufake igama lembobo yakho yomkhiqizo).
• Lo myalo wethula uhlelo lokusebenza lwe-IDF Monitor:

  

• Ngemva kokuqala kanye namalogi okuxilonga askrolela phezulu, kufanele ubone "Sawubona mhlaba!" ephrintwe uhlelo lokusebenza.

  
• Ukuze uphume kumonitha we-IDF, sebenzisa isinqamuleli esithi Ctrl+].
• Yilokho kuphela okudingayo ukuze uqalise ngemojula ye-ESP8684-WROOM-06C! Manje usukulungele ukuzama enye i-exampLes ku-ESP-IDF, noma uye kwesokudla ukuze uthuthukise izinhlelo zakho zokusebenza.

Isitatimende se-US FCC

Idivayisi ithobelana ne-KDB 996369 D03 OEM Manual v01. Ngezansi kunemiyalo yokuhlanganisa yabakhiqizi bomkhiqizo abasingathi ngokwe-KDB 996369 D03 OEM Manual v01.

Uhlu Lwemithetho Ye-FCC Esebenzayo
I-FCC Ingxenye 15 Ingxenye Engaphansi C 15.247

Imibandela Yokusebenzisa Ethize
Imojula inemisebenzi ye-WiFi ne-BLE.

• Imvamisa yokusebenza:
  • I-WiFi: 2412 ~ ​​2462 MHz
  • I-Bluetooth: 2402 ~ ​​2480 MHz
• Inombolo yesiteshi:
  • I-WiFi: 11
  • I-Bluetooth: 40
• Ukuguquguquka:
  • I-WiFi: I-DSSS; OFDM
  • I-Bluetooth: I-GFSK;
• Uhlobo: Ebhodini PCB Antenna
• Zuza: 2.7 dBi Max
  Imojula ingasetshenziselwa izinhlelo zokusebenza ze-IoT ezinothi oluphezulu lwe-2.7 dBi. Umkhiqizi osokhaya ofaka le mojula emkhiqizweni wakhe kufanele aqinisekise ukuthi umkhiqizo wokugcina oyinhlanganisela uthobela izimfuneko ze-FCC ngokuhlolwa kobuchwepheshe noma ukuhlolwa kwemithetho ye-FCC, okuhlanganisa nokusebenza komthumeli. Umkhiqizi wosokhaya kufanele aqaphele ukuthi anganikezi ulwazi kumsebenzisi wokugcina mayelana nendlela yokufaka noma ukususa le mojula ye-RF kubhukwana lomsebenzisi lomkhiqizo wokugcina ohlanganisa le mojula. Imanuwali yomsebenzisi wokugcina izofaka yonke imininingwane yokulawula edingekayo/izixwayiso njengoba kukhonjisiwe kule manuwali.

Izinqubo Zemojuli Elinganiselwe
Akufaneleki. Imojula iyimojula eyodwa futhi ithobelana nezidingo ze-FCC Ingxenye 15.212.

Landelela Imiklamo ye-Antenna
Akufaneleki. Imojula inothi lwayo, futhi ayidingi ibhodi ephrintiwe ye-microstrip trace antenna, njll.

Ukucatshangelwa kokuvezwa kwe-RF
Imojula kufanele ifakwe kumshini wokusingathwa ngendlela yokuthi okungenani kugcinwe u-20cm phakathi kothi nomzimba wabasebenzisi; futhi uma isitatimende sokuchayeka se-RF noma isakhiwo semojula sishintshwa, khona-ke umenzi womkhiqizo osokhaya kudingeka azibophezele kumojuli ngoshintsho ku-ID ye-FCC noma uhlelo lokusebenza olusha. I-ID ye-FCC yemojuli ayikwazi ukusetshenziswa emkhiqizweni wokugcina. Kulezi zimo, umkhiqizi womsingathi uzoba nesibopho sokuhlola kabusha umkhiqizo wokugcina (okuhlanganisa nesidlulisi) kanye nokuthola ukugunyazwa kwe-FCC okuhlukile.

Izimpondo

• Imininingwane ye-antenna imi kanje:
  • Uhlobo: I-PCB Antenna
  • Zuza: 2.7dbi
• Le divayisi ihloselwe abakhiqizi abangabasingathi kuphela ngaphansi kwezimo ezilandelayo:
  • Imojula yokudlulisa kungenzeka ingabi ndawonye nanoma yisiphi esinye isidluliseli noma uthi.
  • Imojula izosetshenziswa kuphela no(izi)antenna lwangaphandle oluhloliwe futhi lwaqinisekiswa ngale mojula.
  • I-antenna kufanele inamathiselwe unomphela noma isebenzise i-coupler 'eyingqayizivele' yothi.
• Inqobo nje uma izimo ezingenhla zihlangatshezwana nazo, ezinye izivivinyo zama-transmitter ngeke zidingeke. Nokho, umkhiqizi womsingathi usenomthwalo wemfanelo wokuhlola umkhiqizo wakhe wokuphela ukuze athole noma yiziphi izimfuneko zokuthobela ezengeziwe ezidingekayo ngale mojula efakiwe (ngokwesibonelo.ample, ukukhishwa kwemishini yedijithali, izidingo ze-PC peripheral, njll.).

Ulwazi Lwelebula Nokuthotshelwa Kwemithetho
Abakhiqizi bomkhiqizo osokhaya badinga ukuhlinzeka ngelebula eliphathekayo noma le-e-mail elithi “Iqukethe i-FCC ID: 2AC7Z-ESP868406C” nomkhiqizo wabo oqediwe.

Ulwazi lwamamodi okuhlola kanye nezidingo zokuhlola ezengeziwe

• Imvamisa yokusebenza:
  • I-WiFi: 2412 ~ ​​2462 MHz
  • I-Bluetooth: 2402 ~ ​​2480 MHz
• Inombolo yesiteshi:
  • I-WiFi: 11
  • I-Bluetooth: 40
• Ukuguquguquka:
  • I-WiFi: I-DSSS; OFDM
  • I-Bluetooth: I-GFSK;
    Abakhiqizi abangabasingathi kufanele benze izivivinyo zokukhishwa kwemisebe kanye nokwenziwe kanye nokuphuma okungamanga, njll., ngokuya ngezindlela zokuhlola zangempela zesidlulisi semodyuli esizimele sodwa kumsingathi, kanye namamojula adlulisa kanyekanye noma amanye ama-transmitters kumkhiqizo osingathiwe. Kuphela uma yonke imiphumela yokuhlolwa yezindlela zokuhlola ithobelana nezimfuneko ze-FCC, umkhiqizo wokugcina uzothengiswa ngokusemthethweni.

Ukuhlola okwengeziwe, Ingxenye 15 Ingxenye Encane B iyathobelana

• I-modular transmitter igunyazwe i-FCC kuphela ye-FCC Ingxenye 15 Ingxenye Encane C 15.247, futhi umkhiqizi womkhiqizo osingethe unesibopho sokuthobela noma yimiphi eminye imithetho ye-FCC esebenza kumsingathi ongakhaviwe yi-modular transmitter grant of certification. Uma onikezwayo amaketha umkhiqizo wakhe njengokuthobela Ingxenye 15 Engaphansi (lapho futhi iqukethe i-digital-radiator digital circuitry), khona-ke onikezwayo uzohlinzeka ngesaziso esisho ukuthi umkhiqizo wokugcina wokusingathwa usadinga ukuhlolwa kokuthobela Ingxenye 15 Yengxenye Engaphansi B efakwe isidlulisi semodular.
• Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngaphansi kweNgxenye 15 yeMithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lo mshini ukhiqiza, usebenzise, ​​futhi ungasakaza amandla efrikhwensi yomsakazo futhi, uma ungafakiwe futhi usetshenziswa ngokwemiyalelo, ungabangela ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo.
• Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinye salezi zinyathelo ezilandelayo:
  • Hlela kabusha noma hambisa uthi olwamukelayo.
  • Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
  • Xhuma okokusebenza endaweni esesekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
  • Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.
• Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
  • Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi.
  • Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
    Isexwayiso:
    Noma yiziphi izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
• Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-FCC RF ebekwe endaweni engalawuleki. Lolu cingo kanye nothi lwayo akumele kubekwe endaweni eyodwa noma kusebenze ngokuhambisana nanoma yiluphi olunye uthi noma isidlulisi. Ama-antenna asetshenziselwa lesi sithumeli kufanele afakwe ukuze anikeze ibanga lokuhlukanisa okungenani elingama-20 cm kubo bonke abantu futhi akumele abekwe ndawonye noma asebenze ngokuhlangana nanoma iyiphi enye i-antenna noma isidlulisi.

OEM Integration Imiyalo
Le divayisi ihloselwe kuphela izihlanganisi ze-OEM ngaphansi kwezimo ezilandelayo:

• Imojula yokudlulisa kungenzeka ingabi ndawonye nanoma yisiphi esinye isidluliseli noma uthi.
• Imojula izosetshenziswa kuphela nothi oluhloliwe futhi lwaqinisekiswa ngale mojula.
• Inqobo nje uma izimo ezingenhla zihlangatshezwana nazo, ezinye izivivinyo zama-transmitter ngeke zidingeke. Kodwa-ke, isihlanganisi se-OEM sisenomthwalo wemfanelo wokuhlola umkhiqizo wabo wokugcina nganoma yiziphi izimfuneko zokuthobela ezengeziwe ezidingekayo ngale mojula efakiwe (ngokwesibonelo.ample, ukukhishwa kwemishini yedijithali, izidingo ze-PC peripheral, njll.).

Ukufaneleka Kokusebenzisa Isitifiketi Semojuli
Uma le mibandela ingenakufinyelelwa (isibample, ukulungiselelwa okuthile kwekhompuyutha ephathekayo noma indawo ehlangene nenye i-transmitter), bese ukugunyazwa kwe-FCC kwale mojula kuhlanganiswe nesisetshenziswa sokusingatha akusabhekwa njengokuvumelekile, futhi i-ID ye-FCC yemojuli ayikwazi ukusetshenziswa emkhiqizweni wokugcina. Kulezi zimo, isihlanganisi se-OEM sizoba nesibopho sokuhlola kabusha umkhiqizo wokugcina (okuhlanganisa nesidluliseli) kanye nokuthola ukugunyazwa kwe-FCC okuhlukile.

Qeda Ukulebula Komkhiqizo
Umkhiqizo wokugcina kufanele ulebulwe endaweni ebonakalayo ngalokhu okulandelayo: “Iqukethe i-FCC ID ye-Transmitter Module: 2AC7Z-ESP868406C”.

Imibhalo Ehlobene Nezinsiza Ezihlobene

• Idatha ye-ESP8684 - Imininingwane yehadiwe ye-ESP8684.
• I-ESP8684 Technical Reference Manual - Imininingwane enemininingwane yokuthi isetshenziswa kanjani inkumbulo ye-ESP8684 kanye nama-peripherals.
• I-ESP8684 Imihlahlandlela Yokuklama Izingxenyekazi zekhompuyutha - Imihlahlandlela yokuthi ungayihlanganisa kanjani i-ESP8684 kumkhiqizo wakho wehadiwe.
• Izitifiketi https://espressif.com/en/support/documents/certificates
• Izaziso Zokushintsha Komkhiqizo/Inqubo ye-ESP8684 (PCN) https://espressif.com/en/support/documents/pcns?keys=ESP8684
• Ukubuyekezwa Kwamadokhumenti Nokubhalisa Kwesaziso Sokuvuselela https://espressif.com/en/support/download/documents

Indawo Yonjiniyela

• I-ESP-IDF Programming Guide ye-ESP8684 – Imibhalo ebanzi yohlaka lokuthuthukiswa kwe-ESP-IDF.
• I-ESP-IDF nezinye izinhlaka zokuthuthukisa ku-GitHub.
  https://github.com/espressif
• Iforamu ye-ESP32 BBS - Umphakathi Wonjiniyela ukuya kuNjiniyela (E2E) wemikhiqizo ye-Espressif, lapho ungathumela khona imibuzo,
  yabelana ngolwazi, hlola imibono, futhi usize ukuxazulula izinkinga nabanye onjiniyela.
  https://esp32.com/
• Ijenali ye-ESP - Imikhuba Engcono Kakhulu, Imibhalo, Namanothi avela ku-Espressif abantu.
  https://blog.espressif.com/
• Bona amathebhu SDK, Demos, Apps, Tools, kanye AT Firmware.
  https://espressif.com/en/support/download/sdks-demos

Imikhiqizo

• I-ESP8684 Series SoCs - Phequlula kuwo wonke ama-ESP8684 SoCs. https://espressif.com/en/products/socs?id=ESP8684
• Amamojula ochungechunge we-ESP8684 Phequlula kuwo wonke amamojula asekelwe ku-ESP8684. https://espressif.com/en/products/modules?id=ESP8684
• I-ESP8684 Series DevKits – Phequlula kuwo wonke ama-devkits asekelwe ku-ESP8684. https://espressif.com/en/products/devkits?id=ESP8684
• Isikhethi somkhiqizo we-ESP - Thola umkhiqizo wehadiwe we-Espressif ofanele izidingo zakho ngokuqhathanisa noma ukusebenzisa izihlungi. https://products.espressif.com/#/product-selector?language=en

Xhumana nathi
Bona amathebhu Imibuzo Yokuthengisa, Imibuzo Yezobuchwepheshe, Isikimu Sesifunda & Ne-PCB Design Review, Thola Samples (Izitolo eziku-inthanethi), Yiba Ngumhlinzeki Wethu, Amazwana & Iziphakamiso. https://espressif.com/en/contact-us/sales-questions

Umusho wokuzihlangula kanye nesaziso se-copyright

• Ulwazi kulo mbhalo, kuhlanganisa URL izinkomba, zingashintsha ngaphandle kwesaziso.
• LONKE IMINININGWANE YENKAMPANI YESITHATHU KULO MBHALO INIKEZELWA NJENGOBA IFANA IZIQINISEKISO ZOBUQINISO NOKUNEMBA KWALO.
• AYIKHO ISIQINISEKISO ESINIKEZELWE KULO MQULU NGOKUTHENGISWA KWAWO, UKUNGAPHUMULI KWAWO, UKULUNGELA KWANOMA YIYIPHI INHLOSO ETHILE, FUTHI AYIKHO ISIQINISEKISO ENGAKHO ESIVELA KUNOMA siphi isiphakamiso, INKCAZELO, NOMA IZINHLOSO.AMPLE.
• Zonke izikweletu, okuhlanganisa isikweletu sokwephulwa kwanoma yimaphi amalungelo obunikazi, ahlobene nokusetshenziswa kolwazi olukule dokhumenti asikhishiwe. Awekho amalayisensi ashiwo noma ashiwo, nge-estoppel noma ngenye indlela, kunoma imaphi amalungelo empahla yengqondo anikezwe lapha.
• Ilogo yeLungu le-Wi-Fi Alliance wuphawu lokuthengisa lwe-Wi-Fi Alliance. Ilogo ye-Bluetooth wuphawu lokuthengisa olubhalisiwe lwe-Bluetooth SIG.
• Wonke amagama okuhweba, izimpawu zokuhweba, nezimpawu zokuthengisa ezibhalisiwe ezishiwo kulo mbhalo ziyimpahla yabanikazi bazo futhi ziyamukelwa.

Imibuzo Evame Ukubuzwa (FAQ)

• Ngingakwazi ukusebenzisa kokubili ukusebenza kwe-Wi-Fi ne-Bluetooth ngesikhathi esisodwa ku-ESP8684-WROOM-06C?
  Yebo, imojula isekela kokubili ukusebenza kwe-Wi-Fi ne-Bluetooth ngesikhathi esisodwa, inika amandla izinhlelo zokusebenza ezihlukahlukene ezidinga amakhono angenantambo amabili.
• Iliphi ibanga lokushisa elinconywayo lokusebenzisa i-ESP8684-WROOM-06C?
  Ibanga lokushisa le-ambient elinconywayo lemojula licaciswe kudatha yedatha futhi kufanele lilandelwe ukuze kusebenze kahle nokuhlala isikhathi eside.

Amadokhumenti / Izinsiza

ESPRESSIF SYSTEMS ESP8684-WROOM-060 ESP32 C2 Imojula [pdf] Imaniwali yosebenzisayo 2AC7Z-ESP868406C, 2AC7ZESP868406C, esp868406c, ESP8684-WROOM-060 ESP32 C2 Imojuli, ESP8684-WROOM-060, ESP32 C2 Imojuli, C2 Imojuli

Izithenjwa

• Imaniwali yosebenzisayo