SPEC SHEET – 403552 (HS003)
Zip Hydroboil
Instant on-wall boiling water
Enjoy no waiting time with this convenient, reliable and safe wall-mounted instant boiling water unit. Advanced technology delivers boiling water heated to within 0.5°C of set temperature. Simple to use, it employs an external twoway classic tap with fingertip control for filling cups. The tap also locks on to fill pots hands-free.
| MODEL | TANK SIZE (litres) |
HEAT UP TIME (INLET 15°C) |
HEAT UP TIME (INLET 10°C) |
NOMINAL POWER RATING KW |
DIMENSIONS W X D X H |
FILLED WEIGHT |
| 403552 | 3 | 16mins | 17mins | 1.4 kW @ 230V AC | 300mm x 183mm x 439mm | 12.5kg |
Features and benefits
Convenience
The Hydroboil range delivers reliable boiling water instantly, saving time and helping to increase workplace productivity.
Space saving
Wall-mounted units save much-needed counter-top and under-counter space.
Easy and safe to use
Simple controls and a range of safety features give you complete peace of mind.
Energy efficient
Steam-Heat-Boost technology saves energy by recycling steam to pre-heat incoming cold water – making boiling quicker and less costly.
Wide range
With capacities ranging from 1.5 to 40 litres, there is a model for every situation.
Product detail
Specification type
| Product code | 403552 (HS003) |
| Product name | HydroBoil HS003 3ltr Instant on-wall boiling water heater in white |
| Case material | Corrosion Resistant White Enamelled Steel |
| Instant boiling water | Twin chamber |
| Control | N/A |
| Service Access Port | Top and bottom |
Capacity, weights & dimensions
| Capacity | 3ltrs |
| Unit dimension (W x D x H) | 300mm x 183mm x 439mm |
| Product weight | 12.5kg |
| Plumbing | |
| Wholesome cold water inlet supply required | Yes |
| Supply pressure range | 0.07 MPa (0.7bar) – 0.5 (5bar) |
| Inlet pipe | 1/2″BSP |
| Vent pipe | 15mm |
| Vent discharge | Visible tundish or drainage board |
| Installation | Must comply with current water supply regulations |
Electrical
| Nominal power rating kw | 1.4 kW @ 230V AC |
| Power supply 1.5L to 25L models | 1 x 13A double pole isolation switch or socket outlet |
| Installation | Must comply with current IEE regulations |
Warranty
| 2 Year on-site parts and labour on site | Terms and conditions apply (visit website for more information) |
Technical drawings & dimensions
All dimensions in mm
Specification sheet Zip Hydroboil
Technical Support Tel. 0345 6 005 005 Email: service@zipindustries.co.uk specify.zipwater.co.uk
Documents / Resources
 |
ZIP 403552 Hydroboil Instant On-Wall Boiling Water [pdf] Instructions 403552 Hydroboil Instant On-Wall Boiling Water, 403552, Hydroboil Instant On-Wall Boiling Water, Instant On-Wall Boiling Water, Wall Boiling Water, Boiling Water, Water |
