STMicroelectronics UM2406 Ilana Olumulo Package Software IwUlO RF-Flasher

Awọn ẹrọ wo ni o ni atilẹyin nipasẹ package sọfitiwia IwUlO RF-Flasher?
Awọn akojọpọ sọfitiwia n ṣe atilẹyin lọwọlọwọ BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ati awọn ẹrọ BlueNRG-2.

Kini awọn ibeere eto to kere julọ lati ṣiṣẹ IwUlO RF-Flasher?
Awọn ibeere eto to kere julọ pẹlu o kere ju 2 GB ti Ramu, awọn ebute USB, ati Adobe Acrobat Reader 6.0 tabi nigbamii.
Bawo ni MO ṣe le fipamọ aworan iranti lọwọlọwọ ni IwUlO RF-Flasher?
Lati fipamọ aworan iranti lọwọlọwọ, lọ si [File] > [Fipamọ File Bi…] ko si yan apakan iranti lati wa ni fipamọ si .bin file.

UM2406
Itọsọna olumulo

Ohun elo sọfitiwia ohun elo RF-Flasher

Ọrọ Iṣaaju

Iwe yii ṣe apejuwe package sọfitiwia IwUlO RF-Flasher (STSW-BNRGFLASHER), eyiti o pẹlu ohun elo PC IwUlO RF-Flasher.
IwUlO RF-Flasher jẹ ohun elo PC adaduro, eyiti o fun laaye BlueNRG-1, BlueNRG-2, BlueNRG-LP, ati BlueNRG-LPS Bluetooth® Low Energy Systems-lori-chip filasi iranti lati ka, paarẹ pupọ, kọ, ati siseto.
Lọwọlọwọ o ṣe atilẹyin wiwo si BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ati BlueNRG-2 iranti filasi nipasẹ ipo UART nipa lilo ẹrọ ti inu UART bootloader. O tun ṣe atilẹyin lọwọlọwọ ni wiwo si BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ati BlueNRG-2 iranti filasi nipasẹ ipo SWD nipa lilo wiwo SWD boṣewa nipasẹ awọn irinṣẹ siseto ohun elo / ṣatunṣe awọn irinṣẹ (CMSIS-DAP, ST-LINK) , ati J-Link).
Pẹlupẹlu, o tun ngbanilaaye adirẹsi MAC lati wa ni ipamọ ni ipo iranti filasi kan pato ti olumulo yan ni awọn ipo UART ati SWD mejeeji.
Ohun elo sọfitiwia RF-Flasher tun pese ohun elo ifilọlẹ filasi imurasilẹ, gbigba siseto iranti filasi, kika, piparẹ pupọ, ati ijẹrisi akoonu. IwUlO ifilọlẹ flasher nilo window PC DOS nikan.

Akiyesi:
Ọrọ RF lọwọlọwọ n tọka si BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ati awọn ẹrọ BlueNRG-2. Eyikeyi iyatọ pato ti wa ni afihan ni ibi ti o nilo.

ifihan pupopupo

Akojọ ti awọn acronyms

Table 1. Akojọ ti awọn acronyms

Igba	Itumo
RF	Igbohunsafẹfẹ Redio
SWD	Serial waya yokokoro
UART	Olugba asynchronous gbogbo agbaye
USB	Universal jara akero

Awọn iwe aṣẹ itọkasi

Table 2. Awọn iwe itọkasi

Itọkasi	Iru	Akọle
DS11481	BlueNRG-1 iwe data	Eto alailowaya Bluetooth® Low Energy SoC
DS12166	BlueNRG-2 iwe data	Eto alailowaya Bluetooth® Low Energy SoC
DB3557	STSW-BNRGFLASHER data finifini	Alaye kukuru fun akojọpọ sọfitiwia RF-Flasher
DS13282	BlueNRG-LP iwe data	Eto alailowaya Bluetooth® Low Energy SoC
DS13819	BlueNRG-LPS iwe data	Eto alailowaya Bluetooth® Low Energy SoC

Bibẹrẹ

Abala yii ṣapejuwe gbogbo awọn ibeere eto lati ṣiṣẹ ohun elo PC IwUlO RF-Flasher ati ilana fifi sori ẹrọ sọfitiwia ti o ni ibatan.

Awọn ibeere eto
IwUlO RF-Flasher ni awọn ibeere to kere julọ wọnyi:

PC pẹlu Intel® tabi ero isise AMD ti nṣiṣẹ ẹrọ ṣiṣe Microsoft® wọnyi:
- Windows® 10
O kere ju 2 GB ti Ramu
Awọn ibudo USB
Adobe Acrobat Reader 6.0 tabi nigbamii
Iwọn ifihan ti a ṣe iṣeduro ati awọn eto jẹ to 150%.

Eto package software
Olumulo le ṣiṣẹ ohun elo yii nipa tite lori aami IwUlO RF-Flasher ([Bẹrẹ]> [ST RF-Flasher Utility xxx]> [RF-Flasher Utility]).

Toolbar ni wiwo

Ni apakan ọpa irinṣẹ ti window akọkọ ohun elo RF-Flasher, olumulo le ṣe awọn iṣẹ wọnyi:

Ṣe kojọpọ .bin tabi .hex (Intel ti o gbooro sii) file, lilo [File>> [Ṣii file…]
Fi aworan iranti ti isiyi pamọ sinu .bin file, lilo [File>> [Fipamọ File Bi…]. Adirẹsi ibẹrẹ ati iwọn apakan iranti lati wa ni fipamọ si awọn file jẹ yan lati awọn Device Memory taabu.
Pa .bin tabi .hex ti o wa tẹlẹ file, lilo [File>> [Pade file]
Ṣeto igbohunsafẹfẹ ST-LINK, ni lilo [Awọn irinṣẹ]>[Eto…]
Muu ṣiṣẹ tabi mu igbasilẹ ṣiṣẹ file ẹda ni UART/SWD modality, lilo [Awọn irinṣẹ]> [Eto…]. Ti o ba wọle files ti wa ni fipamọ, o ṣee ṣe lati ṣeto ipele ti alaye yokokoro lati fipamọ (fun SWD nikan). Gbogbo log files wa ni fipamọ si {installation path}\ST\RF-Flasher Utility xxxLogs\.
Paarẹ pupọ, ni lilo [Awọn irinṣẹ]>[Parẹ ọpọ eniyan].

Daju akoonu iranti filasi [Awọn irinṣẹ]>[Ṣiṣe daju akoonu filasi].
Gba ẹya ohun elo, ni lilo [Iranlọwọ]>[Nipa].
Ṣe igbasilẹ a file, lilo [Awọn irinṣẹ]>[Flash].

Pa awọn apa ẹrọ rẹ, ni lilo [Awọn irinṣẹ]>[Pa awọn oju-iwe rẹ kuro…]
Ṣe afiwe iranti ẹrọ pẹlu aworan ti o yan file, lilo [Awọn irinṣẹ]>[Fifiwera Device Memory pẹlu file]. Awọn aworan meji files ti han ni Afiwera ẹrọ Iranti pẹlu Aworan File taabu ati awọn iyatọ ti o jọmọ jẹ afihan ni pupa.
Ṣe afiwe meji files, lilo [File>> [Fiwe meji files]

Ka eka bootloader (nikan ni ipo SWD), ni lilo [Awọn irinṣẹ]>[Ka Ẹka Bootloader (SWD)].
Ka agbegbe OTP (nikan ni ipo SWD), ni lilo [Awọn irinṣẹ]>[Ka Agbegbe OTP (SWD)].
Ṣafipamọ awọn apa bootloader tabi agbegbe OTP ni .bin kan file, lilo [File>> [Fipamọ File Bi…].

Olumulo tun le yan aworan meji files ki o si afiwe wọn. Awọn aworan meji files ti han ni Afiwe Meji Files taabu ati awọn ibatan iyato ti wa ni afihan ni pupa. .bin ati .hex file awọn ọna kika ti wa ni atilẹyin.

Ni apakan oke ti window akọkọ ohun elo RF-Flasher, olumulo le yan aworan naa file nipasẹ awọn [Yan Aworan File] bọtini. Olumulo le yan iru iranti: iranti filasi, bootloader, tabi agbegbe OTP. Fun agbegbe iranti filasi, olumulo le ṣeto adirẹsi ibẹrẹ (fun bin file)
Gbogbo awọn aṣayan wọnyi wa ni ipo UART ati SWD.
Olumulo nilo lati mu iraye si ipo ti o yan (UART tabi SWD). Wọn le ṣe eyi nipa ṣiṣi ibudo COM ti o somọ fun ipo UART, tabi nipa sisopọ ohun elo siseto ohun elo SWD / ohun elo n ṣatunṣe aṣiṣe si awọn laini SWD ẹrọ.

UART akọkọ window
Ninu taabu window akọkọ UART ti window akọkọ IwUlO RF-Flasher, olumulo le yan ibudo COM lati lo lati ni wiwo ẹrọ naa nipasẹ Akojọ apakan Awọn ibudo COM.
Oṣuwọn baud ni tẹlentẹle ti a lo fun igbimọ igbelewọn ohun elo RF jẹ 460800 bps.

Ipo UART: bi o ṣe le ṣiṣẹ
Aworan file yiyan
Lati kojọpọ .bin tabi .hex ti o wa tẹlẹ file, lo [Yan Aworan File] bọtini lori oju-iwe akọkọ, lilö kiri si [File>> [Ṣii File…], tabi lọ si Aworan File taabu. Ni kikun ona ti awọn ti o yan file han tókàn si awọn bọtini ati ki o [Flash] bọtini di lọwọ nigbati awọn file ti kojọpọ.
Atokọ ti Awọn ibudo COM taabu ṣafihan gbogbo awọn ẹrọ ti a ti sopọ lori awọn ebute oko USB PC. Awọn bọtini [Yan Gbogbo], [Mai yan Gbogbo], ati [Invert All] jẹ ki olumulo ṣalaye iru awọn ẹrọ ti o sopọ (gbogbo, ko si, tabi diẹ ninu wọn) yẹ ki o jẹ ibi-afẹde awọn iṣẹ ṣiṣe. Ni ọna yii, iṣẹ kanna (iyẹn ni, siseto iranti filasi) le ṣee ṣe ni nigbakannaa lori awọn ẹrọ pupọ. Bọtini [Tọtun] gba olumulo laaye lati sọ atokọ ti awọn ẹrọ ti a sopọ mọ.
Nipa aiyipada, aṣayan [Mass erase] ni apakan [Awọn iṣe] ko ṣayẹwo, ati pe awọn oju-iwe iranti ti o nilo nikan ni a paarẹ ati kọ pẹlu file akoonu. Nigbati aṣayan yii ba ṣayẹwo, piparẹ ni kikun yoo ṣaju ipele siseto iranti filasi.
Aṣayan [Daju] fi agbara mu ayẹwo lati rii daju pe akoonu iranti ti kọ ni deede.
Ṣayẹwo aṣayan [Imudojuiwọn Iranti Ẹrọ] lati ṣe imudojuiwọn tabili iranti ẹrọ lẹhin iṣẹ kan lori iranti filasi.
Aṣayan Idaabobo kika jẹ ki o jẹ ki idaabobo ẹrọ kika kika lẹhin siseto iranti filasi.
Ṣayẹwo aṣayan [Auto Baudrate] nikan ti o ba ṣe atunṣe ohun elo kan lori igbimọ lati fi ipa mu iṣẹ [Auto Baudrate]. Nipa aiyipada, aṣayan [Auto Baudrate] ko ṣayẹwo.

Aworan naa File taabu
Awọn ti o yan file orukọ, iwọn, ati awọn akoonu ti a ṣe itupalẹ lati ṣe eto ninu iranti filasi ẹrọ le jẹ viewed ni Aworan File taabu.

The Device Memory taabu
Yan taabu yii si view awọn akoonu iranti ti ẹrọ ti a ti sopọ (nipasẹ bọtini [Ka]) ati akọọlẹ ti o ni awọn iṣẹ ṣiṣe lori ẹrọ ti o yan.

Tẹ bọtini [Ka] lati gbe apakan iranti ti asọye nipasẹ [Ibẹrẹ Adirẹsi ati Iwọn] sinu tabili.
Lati ka gbogbo iranti filasi, ṣayẹwo aṣayan [Gbogbo Iranti].
Oju-iwe akọkọ fun adirẹsi ipilẹ ti awọn baiti 16 wọnyi ni ọna kan (fun example, kana 0x10040050, iwe 4 di baiti hexadecimal iye ni 0x10040054. Olumulo le yi awọn iye baiti pada nipa titẹ-lẹẹmeji sẹẹli kan ati titẹ iye hexadecimal tuntun kan. Awọn baiti satunkọ han ni pupa.
Tẹ bọtini [Kọ] lati ṣe eto gbogbo oju-iwe pẹlu awọn iye baiti tuntun sinu iranti filasi ẹrọ.
Bọtini [Flash] ngbanilaaye iṣẹ siseto iranti filasi lati bẹrẹ pẹlu aṣayan ti o yan. Ti o ba ti ṣayẹwo apoti [MAC Adirẹsi], olumulo le pato adirẹsi iranti nibiti o ti fipamọ adirẹsi MAC ti o yan. Nigbati bọtini [Flash] ba tẹ lori, adiresi MAC ti ṣe eto lẹhin aworan naa file.

Ṣe afiwe Iranti Ẹrọ pẹlu Aworan File taabu
Olumulo le ṣe afiwe iranti ẹrọ lọwọlọwọ pẹlu aworan ti o yan file. Awọn aworan meji files ti han ati eyikeyi iyatọ ti wa ni afihan ni pupa. .bin ati .hex files kika ni atilẹyin.

Lilo ohun elo RF-Flasher pẹlu awọn igbimọ miiran
IwUlO RF-Flasher laifọwọyi ṣe iwari BlueNRG-1, BlueNRG-2, BlueNRG-LP, ati awọn igbimọ igbelewọn BlueNRG-LPS (ti o han bi STDK) ti o ni asopọ si awọn ebute USB PC. O nlo STM32 oluranlowo (ti a ṣe nipasẹ GUI) lati tun ẹrọ naa pada ki o si fi sii ni ipo bootloader UART.
Ohun elo naa tun ṣiṣẹ pẹlu awọn igbimọ aṣa, pese iwọle UART ti o rọrun si ẹrọ ti a ti sopọ, ṣugbọn olumulo gbọdọ fi ẹrọ naa sinu ipo bootloader pẹlu ọwọ. Lori yiyan eyikeyi awọn ebute oko oju omi STEVAL COM, agbejade atẹle yoo han:

Nigbati agbejade yii ba han ati da lori iru ẹrọ, ipo bootloader ti mu ṣiṣẹ gẹgẹbi atẹle:

Fun awọn ẹrọ BlueNRG-LP ati BlueNRG-LPS, olumulo gbọdọ ṣeto PIN PA10 si iye to ga ati ṣe eto atunto ẹrọ naa (titọju PA10 ni iye giga).
Fun awọn ẹrọ BlueNRG-1 ati BlueNRG-2, olumulo gbọdọ ṣeto PIN DIO7 si iye giga ati tun ẹrọ naa (titọju DIO7 ni iye giga).

Olumulo tun le ṣeto oṣuwọn baud ti o fẹ fun UART ni window agbejade ati lẹhinna tẹ O DARA lati pada si GUI.

Akiyesi:
Olumulo gbọdọ yago fun atunto ẹrọ lakoko lilo ohun elo RF-Flasher, ayafi ti agbejade Eto ComPort nṣiṣẹ. Ti ẹrọ ba tunto, olumulo gbọdọ yi ibudo COM pada lati lo IwUlO Flasher lẹẹkansi.

Akiyesi:
Nigbati a ba lo awọn igbimọ aṣa nipa fifun iwọle UART si BlueNRG-1, BlueNRG-2, BlueNRG-LP, ati awọn ẹrọ BlueNRG-LPS nipasẹ wiwo USB FTDI, olumulo yẹ ki o ṣayẹwo-ṣayẹwo lairi ni nkan ṣe pẹlu awakọ PC FTDI USB. Eyi ngbanilaaye ibudo ti a ti sopọ mọ bi COM foju USB kan. Lori awakọ PC USB-FTDI aṣoju, ṣayẹwo lẹẹmeji ẹrọ ti o jọmọ awọn eto awakọ USB ni [Awọn ohun-ini]>[Port
Eto]>[To ti ni ilọsiwaju]. Rii daju pe iye aago idaduro ti ṣeto si 1 ms. Eto yii ni a gbaniyanju gidigidi lati yara awọn iṣẹ iranti filasi lori awọn igbimọ aṣa.

SWD akọkọ window

Lati lo taabu window akọkọ SWD ninu ferese akọkọ ohun elo RF-Flasher, olumulo gbọdọ so siseto ohun elo SWD / ohun elo n ṣatunṣe aṣiṣe si awọn laini SWD ẹrọ (BlueNRG-1, BlueNRG-2, BlueNRG-LP, ati awọn ẹrọ BlueNRG-LPS ).
Awọn atọkun siseto ohun elo SWD wọnyi / n ṣatunṣe aṣiṣe ni atilẹyin, ni ro pe ohun elo ti a yan ati awọn irinṣẹ sọfitiwia ti o jọmọ ṣe atilẹyin ẹrọ ti o sopọ:

CMSIS-DAP
ST-RÁNṢẸ
J-Ọna asopọ

Akiyesi
Lati lo J-Link bi oluyipada yokokoro, awakọ USB nilo lati yipada lati J-Link awakọ si WinUSB. Eyi le ṣee ṣe ni irọrun nipa lilo irinṣẹ HYPERLINK Zadig (https://zadig.akeo.ie) bi atẹle:

Yan J-Link lati inu akojọ ẹrọ
Yan "WinUSB" bi awakọ naa

Tẹ [Fi Driver sori ẹrọ] lati fi awakọ WinUSB sori ẹrọ

Akiyesi:
Tọkasi HYPERLINK J-Link OpenOCD webAaye (https://wiki.segger.com/OpenOCD) fun alaye siwaju sii.

Akiyesi:
IKILO: Ni kete ti awakọ USB J-Link ti rọpo, ko si sọfitiwia SEGGER lati package sọfitiwia J-Link ti o le ṣe ibaraẹnisọrọ pẹlu J-Link. Lati lo sọfitiwia SEGGER J-Link lẹẹkansi, awakọ USB nilo lati yi pada si aiyipada rẹ.

Ipo SWD: bi o ṣe le ṣiṣẹ
Aworan file yiyan
Lo [Yan Aworan File] bọtini lori oju-iwe akọkọ tabi lọ si [File>>[ Ṣii File…] lati kojọpọ .bin tabi .h ex file. Awọn kikun ona ti awọn ti o yan file han tókàn si awọn bọtini ati ki o [Flash] bọtini di lọwọ ni opin ti awọn file ikojọpọ.
Ninu taabu Awọn iṣe, olumulo le yan awọn aṣayan wọnyi:

[Daju]: fi agbara mu ayẹwo lati rii daju pe akoonu iranti ti kọ ni deede
[Idaabobo kika]: jẹ ki aabo kika kika ẹrọ ṣiṣẹ lẹhin siseto aworan ti o yan file

[Mass erase]: ngbanilaaye lati ṣe piparẹ pupọ ti ẹrọ naa ṣaaju siseto aworan ti o yan file
[Imudojuiwọn Iranti Ẹrọ]: ngbanilaaye tabili iranti ẹrọ lati ni imudojuiwọn lẹhin iṣẹ siseto iranti filasi
[Plug&Play mode]: ngbanilaaye ipo siseto plug-ati-play filasi iranti lati mu ṣiṣẹ/alaabo nigbati ohun elo siseto SWD kan wa. Ni idi eyi, awọn igbimọ ti wa ni eto ọkan ni akoko kan. Nigbati iṣẹ siseto ba ti pari lori igbimọ kan, o ṣee ṣe lati yọọ kuro ki o pulọọgi igbimọ miiran.

Nipa aiyipada, aṣayan [Mass erase] lẹgbẹẹ bọtini [Flash] ko ṣayẹwo, ati pe awọn oju-iwe iranti ti o nilo nikan ni a paarẹ ati kọ pẹlu file akoonu.
Awọn taabu [Atokọ ti awọn atọkun ti a ti sopọ] ṣe afihan gbogbo awọn atọkun SWD ti a ti sopọ (CMSIS-DAP, ST-LINK, ati J-Link). Tẹ bọtini [Tọtun] lati ṣe imudojuiwọn atokọ ti awọn atọkun ti a ti sopọ.
Olumulo tun le yan iru wiwo ohun elo SWD kan pato gbọdọ jẹ afihan nipasẹ aaye [Interface].
Awọn bọtini [Yan Gbogbo], [Mai yan Gbogbo], ati [Invert All] gba olumulo laaye lati ṣalaye iru awọn atọkun SWD ti o sopọ (gbogbo, ko si, tabi diẹ ninu wọn) yẹ ki o jẹ ibi-afẹde awọn iṣẹ ṣiṣe. Ni ọna yii, iṣẹ kanna (iyẹn ni, siseto iranti filasi) le ṣee ṣe ni nigbakannaa lori awọn ẹrọ pupọ.
Bọtini [Flash] ngbanilaaye iṣẹ siseto iranti filasi lati bẹrẹ pẹlu aṣayan ti o yan. Ti o ba ti ṣayẹwo apoti [MAC Adirẹsi], olumulo le pato adirẹsi iranti nibiti o ti fipamọ adirẹsi MAC ti o yan. Nigbati bọtini [Flash] ba tẹ lori, adiresi MAC ti ṣe eto lẹhin aworan naa file.
'Aworan File'taabu
Awọn ti o yan file orukọ, iwọn, ati awọn akoonu ti a ṣe itupalẹ lati ṣe eto ninu iranti filasi ẹrọ le jẹ viewed ni Aworan File taabu.

The Device Memory taabu
Yan taabu yii si view awọn akoonu iranti ti ẹrọ ti a ti sopọ (nipasẹ bọtini [Ka]) ati akọọlẹ ti o ni awọn iṣẹ ṣiṣe lori ẹrọ ti o yan.

Akiyesi:
[Fiwera Ẹrọ Iranti si File] tun ṣe atilẹyin ni ipo SWD, pẹlu awọn ẹya kanna gẹgẹbi a ti ṣalaye ni Abala 4.1: Ipo UART: bi o ṣe le ṣiṣe.

Ipo SWD: ka bootloader aladani
Olumulo naa le ka apakan bootloader ti ẹrọ ti a ti sopọ nipasẹ wiwo siseto ohun elo SWD nipa yiyan [Awọn irinṣẹ]>[Ka Abala Bootloader (SWD)]. Awọn akoonu eka bootloader ti han ni Bootloader/OTP taabu.

Akiyesi:
Ẹya yii ni atilẹyin nikan ni ipo SWD ati wiwọle nikan nipasẹ GUI.

Ipo SWD: ka agbegbe OTP
Olumulo naa le ka ẹrọ ti a ti sopọ agbegbe OTP (nibiti o ṣe atilẹyin) nipasẹ wiwo siseto hardware SWD nipa yiyan [Awọn irinṣẹ]>[Ka Agbegbe OTP (SWD)]. Akoonu agbegbe OTP ti han ni Bootloader/OTP taabu.
Ẹya yii ko ṣe atilẹyin ni ipo UART.

SWD Plug&Muu ipo siseto
Ipo siseto Plug&Play SWD ngbanilaaye olumulo lati tẹ lupu siseto nipa sisopọ pẹpẹ ẹrọ tuntun lati ṣe eto. Nigbati aworan iranti filasi file ati awọn iṣẹ siseto ti yan, ohun elo PC Flasher beere lọwọ olumulo lati so ẹrọ kan pọ si wiwo SWD (Iduro fun ẹrọ N. 1 ifiranṣẹ ti han).
Nigbati olumulo ba so ẹrọ naa pọ, ifiranṣẹ ti o sopọ ẹrọ N. 1 yoo han, ati ohun elo naa bẹrẹ siseto ẹrọ naa pẹlu aworan ti o yan. file ati awọn aṣayan. Nigbati iṣẹ siseto ba ti pari, ohun elo Flasher yoo han ifiranṣẹ naa Jọwọ ge asopọ ẹrọ N. 1. Nigbati olumulo ba ge asopọ ẹrọ naa, ifiranṣẹ Nduro fun ẹrọ N. 2 yoo han. Olumulo le da ipo aifọwọyi duro nipa titẹ bọtini [Duro].
Nigbati o ba nlo ipo Plug&Play, olumulo gbọdọ yan wiwo lati ṣee lo (CMSIS-DAP, ST-LINK, tabi J-Link).

Mac adirẹsi siseto

siseto adirẹsi MAC ngbanilaaye adiresi MAC lati wa ni ipamọ si ipo iranti filasi kan pato lori ẹrọ naa.
Olumulo le yan lati mu aṣayan yii ṣiṣẹ tabi kii ṣe nipasẹ ṣiṣayẹwo tabi ṣiṣayẹwo apoti [MAC adirẹsi]. Ipo iranti filasi kan pato ti ṣeto nipasẹ aaye [MAC Flash Flash] aaye.
Bọtini [Ṣeto MAC adirẹsi] gba olumulo laaye lati yan adirẹsi MAC bi atẹle:

Ṣayẹwo apoti ayẹwo [Range] ki o pese adirẹsi ibẹrẹ ni aaye [Ibẹrẹ Adirẹsi]. Adirẹsi ibẹrẹ ni adiresi MAC lati wa ni ipamọ lori ẹrọ akọkọ ti a ti sopọ.
- O ṣee ṣe lati ṣeto awọn igbesẹ afikun ti o bẹrẹ lati iye [Ibẹrẹ Adirẹsi] nipa titẹ nọmba awọn igbimọ lati ṣe eto ni Nọmba. Awọn taabu taabu, tabi nipa titẹ si iye [Adirẹsi Ipari]:
- Ti ipo aifọwọyi ba ti yan ni taabu Awọn iṣẹ, atokọ adirẹsi MAC ti o yan ni a lo fun awọn iṣẹ siseto adaṣe. Ti kii ba ṣe bẹ, ẹrọ kan nikan ni a ṣe eto, ni lilo aaye [Ibẹrẹ Adirẹsi].
Olumulo le pese atokọ ti awọn adirẹsi MAC lati ṣee lo nipasẹ titẹ sii file:
- Ṣayẹwo awọn [File] apoti ko si yan ọrọ titẹ sii file ninu awọn [Load File] aaye.
- Ti ipo aifọwọyi ba ti yan ni taabu Awọn iṣẹ, atokọ adirẹsi MAC ti o yan ni a lo fun awọn iṣẹ siseto adaṣe. Ti kii ba ṣe bẹ, adirẹsi akọkọ nikan ni a lo fun iṣẹ siseto kan.

Apoti [Fipamọ Adirẹsi MAC Fipamọ] jẹ ki atokọ ti awọn adirẹsi MAC ti a lo lati wa ni ipamọ ni a file, ti a yan ninu [File Orukọ] aaye.
Eto siseto adirẹsi MAC le ni idapo pẹlu ipo siseto adaṣe. Fun ẹrọ kọọkan ti a ti sopọ, aworan naa file ti wa ni siseto akọkọ, atẹle nipa adirẹsi MAC. Nọmba awọn adirẹsi MAC ti o yan
(iwọn atokọ adirẹsi afikun tabi titẹ sii file iwọn) nfa opin awọn iṣẹ siseto adaṣe. Adirẹsi MAC kọọkan ti a ṣe eto ti han ni window Wọle.
siseto adirẹsi MAC jẹ atilẹyin ni ipo UAR ati SWD.

Olumulo le yan boya tabi kii ṣe akoko kanamp ti wa ni afikun si awọn Mac adirẹsi log file orukọ (bi suffix).
Ti o ba ti igbaamp ti wa ni ko kun si awọn orukọ ti awọn log file, gbogbo alaye log ti wa ni ipamọ ni akọọlẹ kanna file. Ti o ba ti igbaamp ti wa ni afikun, awọn log alaye fun kọọkan run ti wa ni fipamọ ni kan yatọ si log file.
Orukọ akọọlẹ naa file le ṣe pato nipa lilo [File Orukọ] aaye.

IwUlO ifilọlẹ RF-Flasher

Ifilọlẹ RF-Flasher jẹ ohun elo adaduro ti o ngbanilaaye olumulo lati ṣiṣe awọn aṣẹ ohun elo RF-Flasher nipa lilo GUI IwUlO RF-Flasher.
Ferese aṣẹ DOS kan nilo ati pe mejeeji UART ati awọn ipo SWD ni atilẹyin (lilo .bin ati aworan .hex files).
IwUlO ifilọlẹ RF-Flasher (RF-Flasher_Launcher.exe) wa ninu package sọfitiwia ohun elo RF-Flasher laarin folda ohun elo. “Fọọmu Tu silẹ” ninu akojọ aṣayan ibere akojọpọ sọfitiwia ohun elo RF-Flasher
ohun kan (ST RF-Flasher IwUlO xxx) ngbanilaaye wiwọle taara si folda ohun elo.

Awọn ibeere
Lati le lo ohun elo ifilọlẹ RF-Flasher lori ẹrọ kan pato, awọn ohun pataki wọnyi gbọdọ pade:

Ipo UART: BlueNRG-1, BlueNRG-2, BlueNRG-LP, tabi BlueNRGLPS Syeed gbọdọ jẹ asopọ si ibudo USB PC kan
Ipo SWD: ohun elo siseto ohun elo SWD/ohun elo n ṣatunṣe aṣiṣe gbọdọ jẹ asopọ si BlueNRG-1, BlueNRG-2, BlueNRG-LP, tabi BlueNRG-LPS SWD laini.

Pẹlu aṣayan -l, gbogbo awọn igbesẹ iṣẹ ni a tọpinpin ni log files, ti a fipamọ sinu folda “Logs”, eyiti o ṣẹda ninu apo-iwe sọfitiwia ohun elo RF-Flasher “Ohun elo”.

Awọn aṣayan ohun elo ifilọlẹ RF-Flasher
Lati lo ohun elo ifilọlẹ RF-Flasher lori ẹrọ kan pato, olumulo gbọdọ ṣii ikarahun Windows DOS kan ki o ṣe ifilọlẹ
RF-Flasher_Launcher.exe pẹlu aṣẹ to dara, ati awọn aṣayan (lo –h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin).
RF-Flasher_Launcher.exe -h:
Lilo: RF-Flasher nkan jiju [-h] {filasi, ka, mass_erase, verify_memory, nu_pages, uart, swd, read_OTP,
kọ_OTP}
Ẹya ifilọlẹ RF-Flasher xxx
Awọn ariyanjiyan iyan:
-h, -iranlọwọ: ṣafihan ifiranṣẹ iranlọwọ yii ati jade Awọn aṣẹ:
{flash, read, mass_erase, verify_memory, eraase_pages, uart, swd, read_OTP, write_OTP}

filasi: eto a filasi iranti
ka: ka a filasi iranti

mass_erase: nu a filasi iranti
verify_memory: ṣayẹwo akoonu ti ẹrọ RF pẹlu a file
erase_pages: nu oju-iwe kan tabi diẹ sii lati iranti filasi

uart: ṣafihan gbogbo awọn ebute oko oju omi COM ti a ti sopọ (ipo UART)
swd: ṣafihan gbogbo awọn ẹrọ ti o sopọ nipasẹ wiwo SWD: ST-LINK, CMSIS-DAP, J-Link (ipo SWD)
read_OTP: ka agbegbe OTP (nikan ni ipo SWD)

write_OTP: kọ agbegbe OTP (nikan ni ipo SWD)

IwUlO ifilọlẹ RF-Flasher: UART & awọn ipo SWD
IwUlO ifilọlẹ RF-Flasher ṣe atilẹyin awọn ipo iṣẹ meji:

Ipo UART (so ẹrọ ti o yan pọ si ibudo USB PC)

Ipo SWD (so BlueNRG-1 ti a yan, BlueNRG-2, BlueNRG-LP, tabi BlueNRG-LPS ẹrọ SWD awọn laini si siseto SWD / irinṣẹ aṣiṣe).

IwUlO ifilọlẹ RF-Flasher: lo pipaṣẹ uart lati gba atokọ ti gbogbo awọn ebute oko oju omi COMx ti o wa (awọn ẹrọ ti o sopọ si awọn ebute oko USB PC):

RF-Flasher_Launcher.exe uart
ebute oko = COM194 (ST DK), COM160 (ST DK)
IwUlO ifilọlẹ RF-Flasher: lo aṣẹ swd lati gba atokọ ti gbogbo awọn ohun elo siseto ohun elo SWD ti o wa ti o wa / awọn irinṣẹ n ṣatunṣe aṣiṣe:
RF-Flasher_Launcher.exe swd
Ti sopọ nipasẹ ST-RÁNṢẸ = KO ST-RÁNṢẸ
Ti sopọ nipasẹ CMSIS-DAP (nọmba lẹsẹsẹ ti awọn atọkun CMSIS-DAP):

07200001066fff333231545043084259a5a5a5a597969908
07200001066dff383930545043205830a5a5a5a597969908
07200001066dff333231545043084255a5a5a5a597969908 TI J-Link SO = KO SI J-Link SO.

IwUlO ifilọlẹ RF-Flasher: pipaṣẹ filasi
Lati lo ohun elo ifilọlẹ RF-Flasher lati ṣe eto iranti filasi ẹrọ kan pato, aṣẹ filasi wa (wa aṣayan –h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin):
RF-Flasher_Launcher.exe filasi -h

Flash pipaṣẹ lilo
RF-Flasher_Launcher.exe filasi [-h] [-adirẹsi START_ADDRESS][-f FILE_TO_FLASH
[FILE_TO_FLASH, …]] [-rẹ] [-verify] [-rp] [-mac] [-mac_adirẹsi MAC_ADDRESS][-mac_log_file MAC_LOG_FILE][-mac_bẹrẹ MAC_START_ADDRESS | -mac_file
MAC_FILE_ADDRESS](-gbogbo | -d DEVICE_ID) [-ọrọ-ọrọ {0, 1, 2, 3, 4}] [-l](-UART |
-SWD) [-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}]

Flash pipaṣẹ iyan ariyanjiyan

-adirẹsi START_ADDRESS, --adirẹsi START_ADDRESS: adirẹsi ibẹrẹ.
-gbogbo, –gbogbo: gbogbo awọn ẹrọ ti a ti sopọ (COM ibudo ni UART mode; ST-LINK ID, CMSIS-DAP ID, ati J-link ID ni SWD mode).
-d DEVICE_ID, -ẹrọ DEVICE_ID: ṣeto ID ti ohun elo hardware ti a lo fun asopọ (ibudo COM ni ipo UART; ID ST-LINK, ID CMSIS-DAP, ati ID J-Link ni ipo SWD).

-erase, –-nu: jeki aṣayan [Mass Nu] ṣiṣẹ.
-f FILE_TO_FLASH [FILE_TO_FLASH …], -fileToFlash FILE_TO_FLASH
[FILE_TO_FLASH …]: atokọ ti .bin tabi .hex files lati ṣe eto ẹrọ RF: BlueNRG-1, BlueNRG-2, BlueNRG-LP, tabi BlueNRG-LPS ẹrọ.
igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}, –igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}: ṣeto igbohunsafẹfẹ-moduality (nikan). Iwọn aiyipada jẹ 4000.

-h, -iranlọwọ: ṣe afihan ifiranṣẹ iranlọwọ yii ati jade.
-l, -log: log data.
-mac, –mac: jeki aṣayan [Mac Adirẹsi].

-mac_address –MAC_ADDRESS: ipo iranti filasi nibiti o ti fipamọ adirẹsi Bluetooth® ti gbogbo eniyan.
-mac_file MAC_FILE_ADDRESS, – mf MAC_FILE_ADDRESS: file ti o ni awọn akojọ ti awọn Mac adirẹsi.
-mac_log_file MAC_LOG_FILE, –ml MAC_LOG_FILE: files ti o ni awọn akọọlẹ ti o ti fipamọ / ti ko tọju ati lilo / awọn adirẹsi MAC ti ko lo.

-mac_star MAC_START_ADDRESS, -ms MAC_START_ADDRESS: adirẹsi MAC akọkọ.
-rp, --readout_protection: mu aṣayan [Idaabobo ReadOut] ṣiṣẹ.
-SWD, –-swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware siseto / n ṣatunṣe irinṣẹ).

-UART, –-uart: UART mode. A gbọdọ fi igbimọ aṣa kan si ipo bootloader (iye pin DIO7 ga lakoko ṣiṣe eto atunto ti ẹrọ BlueNRG-1 tabi BlueNRG-2; PA10 pin iye ga lakoko ti o ntunto BlueNRG-LP tabi BlueNRG-LPS ẹrọ) ṣaaju ṣiṣe iṣẹ naa .
-ọrọ-ọrọ {0, 1, 2, 3, 4}, -ọrọ-ọrọ {0, 1, 2, 3, 4}: pọsi ọrọ-ọrọ iṣejade; ṣeto ipele yokokoro soke to 4 (nikan fun SWD modality ati log data). Iwọn aiyipada jẹ 2.
-verify, –verify: jeki aṣayan [Daju] ṣiṣẹ.

Akiyesi:

Ti ipo UART ba yan, ẹrọ naa gbọdọ ni asopọ si ibudo PC USB COM ati aṣayan –UART gbọdọ ṣee lo. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si awọn ebute oko USB PC, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ibudo COM kọọkan nipa lilo aṣayan –d.
Ti o ba ti SWD mode ti wa ni ti a ti yan, ohun SWD hardware siseto / n ṣatunṣe irinṣẹ gbọdọ wa ni ti sopọ si awọn ti o yan ẹrọ SWD ila, ati awọn ti o jẹ pataki lati lo awọn aṣayan -SWD. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si PC nipasẹ wiwo SWD, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ni wiwo kọọkan nipa lilo aṣayan –d.
Alakomeji naa file lati wa ni pato nipa lilo aṣayan –f. Ti olumulo ba fẹ lati ṣe eto BlueNRG-1, BlueNRG-2, BlueNRG-LP, tabi awọn ẹrọ BlueNRG-LPS pẹlu alakomeji oriṣiriṣi. files nigba akoko siseto kanna, wọn le ṣe pato awọn aworan alakomeji ti o tẹle aṣẹ yii: BlueNRG-1, BlueNRG-2, BlueNRG-LP, BlueNRG-LPS.
RF-Flasher_Launcher.exe filasi -UART -gbogbo
– f “C: \{user_ona}\BlueNRG-1_2 DK
3.2.2 \ Firmware \ BlueNRG1_Periph_Examples\Micro\Hello_World\BlueNRG-1\Micro_Hell o_World.bin"
– f “C: \{user_ona}\BlueNRG-1_2 DK
3.2.2 \ Firmware \ BlueNRG1_Periph_Examples \ Micro \ Hello_World \ BlueNRG-2 \ Micro_Hell o_World.bin" -l
– f “C:{user_ona}BlueNRG-LP DK 1.4.0Fimuwia
\Agbeegbe_Examples\ Examples_MIX\MICRO\MICRO_Hello_Ayé\STEVAL-
IDB011V1\Micro_Hello_World.bin”
– f “C:{user_ona}BlueNRG-LP DK 1.4.0Fimuwia
\Agbeegbe_Examples\ Examples_MIX\MICRO\MICRO_Hello_Ayé\STEVAL-
IDB012V1\Micro_Hello_World.bin”
Akọkọ file ti ṣe eto lori awọn ẹrọ BlueNRG-1 ti a ti sopọ; keji file ti ṣe eto lori awọn ẹrọ BlueNRG-2 ti a ti sopọ; kẹta file ti ṣe eto lori awọn ẹrọ BlueNRG-LP ti a ti sopọ; kẹrin file ti ṣe eto lori awọn ẹrọ BlueNRG-LPS ti a ti sopọ.
Ti a ko ba lo aṣayan –f, awọn aworan alakomeji files pato ninu Ohun elo/config_file.conf ti wa ni lilo:
#Aworan file fun ẹrọ BlueNRG_1
BLUENRG_1 = "ona_olumulo"/bluenrg_1_binary_file.hex
#Aworan file fun ẹrọ BlueNRG_2
BLUENRG_2 = "ona olumulo"/bluenrg_2_binary.hex
#Aworan file fun BlueNRG_LP ẹrọ
BLUENRG_LP = "ona olumulo"/bluenrg_lp_binary.hex
#Aworan file fun BlueNRG_LPS ẹrọ
BLUENRG_LPS = "ona_olumulo"/bluenrg_lps_binary.hex
Olumulo gbọdọ pato ọna aworan alakomeji ni kikun fun ẹrọ kọọkan.

IwUlO ifilọlẹ RF-Flasher: pipaṣẹ kika
Lati lo ohun elo ifilọlẹ RF-Flasher lati ka iranti filasi ẹrọ kan pato, aṣẹ kika wa (lo –h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin):
RF-Flasher_Launcher.exe ka –h
Ka pipaṣẹ lilo
RF-Flasher_Launcher.exe ka [-h] [-adirẹsi START_ADDRESS][-iwọn SIZE] [–gbogbo] [-s] (-gbogbo | -d DEVICE_ID)(-UART | -SWD) [-ọrọ-ọrọ {0, 1 , 2, 3, 4}] [-l] [-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}]

Ka pipaṣẹ iyan ariyanjiyan

-adirẹsi START_ADDRESS, --adirẹsi START_ADDRESS: adirẹsi ibẹrẹ (iye aiyipada jẹ 0x10040000).
-gbogbo, –gbogbo: gbogbo awọn ẹrọ ti a ti sopọ (COM ibudo ni UART mode; ST-LINK ID, CMSIS-DAP ID, ati J-link ID ni SWD mode).
-d DEVICE_ID, -ẹrọ DEVICE_ID: ṣeto ID ti ohun elo hardware ti a lo fun asopọ (ibudo COM ni ipo UART; ID ST-LINK, ID CMSIS-DAP, ati ID J-Link ni ipo SWD).
-gbogbo, -gbogbo: ka gbogbo iranti filasi.
-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}, -igbohunsafẹfẹ
{5,15,25,50,100,125,240,480,900,1800,4000}: ṣeto iye igbohunsafẹfẹ (nikan fun SWD modality – ST-LINK hardware). Iwọn aiyipada jẹ 4000.
-h, -–iranlọwọ: ṣe afihan ifiranṣẹ iranlọwọ yii ati jade.
-l, --log: log data.
-s, --show: fi iranti filasi han lẹhin iṣẹ kika.
-iwọn SIZE, --iwọn SIZE: iwọn iranti filasi lati ka (iye aiyipada jẹ 0x3000).
-SWD, –-swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware siseto / n ṣatunṣe irinṣẹ).
-UART, –-uart: UART modality. Awọn igbimọ aṣa gbọdọ wa ni fi si ipo bootloader ṣaaju ṣiṣe iṣẹ yii. Fun awọn ẹrọ BlueNRG-LP ati BlueNRG-LPS, olumulo gbọdọ ṣeto PIN PA10 si iye ti o ga ati ki o ṣe atunto ẹrọ naa, titọju PA10 ni iye giga. Fun awọn ẹrọ BlueNRG-1 ati BlueNRG-2, olumulo gbọdọ ṣeto PIN DIO7 si iye ti o ga ati tunto ẹrọ naa, titọju DIO7 ni iye giga.
-ọrọ-ọrọ {0, 1, 2, 3, 4}, -ọrọ-ọrọ {0, 1, 2, 3, 4}: pọsi ọrọ-ọrọ iṣejade; ṣeto ipele yokokoro soke to 4 (nikan fun SWD modality ati log data). Iwọn aiyipada jẹ 2.
Ti ipo UART ba yan, ẹrọ naa gbọdọ ni asopọ si ibudo PC USB COM ati aṣayan –UART gbọdọ ṣee lo. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si awọn ebute oko USB PC, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ibudo COM kọọkan nipa lilo aṣayan –d.
Ti o ba ti SWD mode ti wa ni ti a ti yan, ohun SWD hardware siseto / n ṣatunṣe irinṣẹ gbọdọ wa ni ti sopọ si awọn ti o yan ẹrọ SWD ila, ati awọn ti o jẹ pataki lati lo awọn aṣayan -SWD. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si PC nipasẹ wiwo SWD, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ni wiwo kọọkan nipa lilo aṣayan –d.

IwUlO ifilọlẹ RF-Flasher: pipaṣẹ piparẹ pupọ
Lati lo ohun elo ifilọlẹ RF-Flasher lati ṣe piparẹ pupọ ti iranti filasi ti ẹrọ kan pato,
pipaṣẹ mass_erase wa (lo -h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin):
RF-Flasher_Launcher.exe mass_erase –h
Lopo pipaṣẹ pipaṣẹ
RF-Flasher_Launcher.exe mass_erase [-h] [-s] (-gbogbo | -d DEVICE_ID) (-UART | -SWD) [-ọrọ-ọrọ {0, 1, 2, 3, 4}] [-l] [- igbohunsafẹfẹ
{5,15,25,50,100,125,240,480,900,1800,4000}]

Ibi nu pipaṣẹ iyan ariyanjiyan

-gbogbo, –gbogbo: gbogbo awọn ẹrọ ti a ti sopọ (COM ibudo ni UART mode; ST-LINK ID, CMSIS-DAP ID, ati J-link ID ni SWD mode).
-d DEVICE_ID, -ẹrọ DEVICE_ID: ṣeto ID ti ohun elo hardware ti a lo fun asopọ (ibudo COM ni ipo UART; ID ST-LINK, ID CMSIS-DAP, ati ID J-Link ni ipo SWD).
-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}, -igbohunsafẹfẹ
{5,15,25,50,100,125,240,480,900,1800,4000}: ṣeto iye igbohunsafẹfẹ (nikan fun SWD modality – ST-LINK hardware). Iwọn aiyipada jẹ 4000.
-h, --iranlọwọ: ṣe afihan ifiranṣẹ iranlọwọ yii ati jade.
-l, --log: log data.
-s, --show: fi iranti filasi han lẹhin isẹ ti o parẹ pupọ.
-SWD, –-swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware siseto / n ṣatunṣe irinṣẹ).
-UART, –-uart: UART modality. Awọn igbimọ aṣa gbọdọ wa ni fi si ipo bootloader ṣaaju ṣiṣe iṣẹ yii. Fun awọn ẹrọ BlueNRG-LP ati BlueNRG-LPS, olumulo gbọdọ ṣeto PIN PA10 si iye ti o ga ati ki o ṣe atunto ẹrọ naa, titọju PA10 ni iye giga. Fun awọn ẹrọ BlueNRG-1 ati BlueNRG-2, olumulo gbọdọ ṣeto PIN DIO7 si iye ti o ga ati tunto ẹrọ naa, titọju DIO7 ni iye giga.
-ọrọ-ọrọ {0, 1, 2, 3, 4}, -ọrọ-ọrọ {0, 1, 2, 3, 4}: pọsi ọrọ-ọrọ iṣejade; ṣeto ipele yokokoro soke to 4 (nikan fun SWD modality ati log data). Iwọn aiyipada jẹ 2.

Akiyesi

Ti ipo UART ba yan, ẹrọ naa gbọdọ ni asopọ si ibudo PC USB COM ati aṣayan –UART gbọdọ ṣee lo. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si awọn ebute oko USB PC, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ibudo COM kọọkan nipa lilo aṣayan –d.
Ti o ba ti SWD mode ti wa ni ti a ti yan, ohun SWD hardware siseto / n ṣatunṣe irinṣẹ gbọdọ wa ni ti sopọ si awọn ti o yan ẹrọ SWD ila, ati awọn ti o jẹ pataki lati lo awọn aṣayan -SWD. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si PC nipasẹ wiwo SWD, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ni wiwo kọọkan nipa lilo aṣayan –d.

IwUlO ifilọlẹ RF-Flasher: jẹrisi pipaṣẹ iranti
Lati lo ohun elo ifilọlẹ RF-Flasher lati mọ daju akoonu iranti filasi ti ẹrọ kan pato, awọn
verify_memory pipaṣẹ wa (lo -h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin):
RF-Flasher_Launcher.exe verify_memory –h

Daju lilo pipaṣẹ iranti
RF-Flasher_Launcher.exe verify_memory [-h] -f FLASH_VERIFY_FILE[-s][-adirẹsi START_ADDRESS](-gbogbo | -d DEVICE_ID) [- verbose {0, 1, 2, 3, 4}][-l] (-UART |-SWD)[-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000]

Daju pipaṣẹ iranti iyan ariyanjiyan

-adirẹsi START_ADDRESS, –-adirẹsi START_ADDRESS: ibere adirẹsi fun ijerisi (fun .bin files nikan). Iwọn aiyipada jẹ 0x10040000.
-gbogbo, –gbogbo: gbogbo awọn ẹrọ ti a ti sopọ (COM ibudo ni UART mode; ST-LINK ID, CMSIS-DAP ID, ati J-link ID ni SWD mode).
-d DEVICE_ID, -ẹrọ DEVICE_ID: ṣeto ID ti ohun elo hardware ti a lo fun asopọ (ibudo COM ni ipo UART; ID ST-LINK, ID CMSIS-DAP, ati ID J-Link ni ipo SWD).
-f FLASH_VERIFY_FILE, --file FLASH_VERIFY_FILE: file lati lo lati mọ daju awọn filasi iranti
-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}, –frequency {5,15,25,50,100,125,240,480,900,1800,4000} – fun ST hardware mode (lori LINKD modality). Iwọn aiyipada jẹ 4000.
-h, -–iranlọwọ: ṣe afihan ifiranṣẹ iranlọwọ yii ati jade
-l, --log: log data.
-s, --show: fi iranti filasi han lẹhin isẹ ṣiṣe
-SWD, --swd: SWD mode (ST-LINK, CMSIS-DAP, J-Link hardware siseto / n ṣatunṣe irinṣẹ).
-UART, –-uart: UART mode.
-ọrọ-ọrọ {0, 1, 2, 3, 4}, -ọrọ-ọrọ {0, 1, 2, 3, 4}: pọsi ọrọ-ọrọ iṣejade; ṣeto ipele yokokoro soke to 4 (nikan fun SWD modality ati log data). Iwọn aiyipada jẹ 2.
Ti ipo UART ba yan, ẹrọ naa gbọdọ ni asopọ si ibudo PC USB COM ati aṣayan –UART gbọdọ ṣee lo. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si awọn ebute oko USB PC, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ibudo COM kọọkan nipa lilo aṣayan –d.
Ti o ba ti SWD mode ti wa ni ti a ti yan, ohun SWD hardware siseto / n ṣatunṣe irinṣẹ gbọdọ wa ni ti sopọ si awọn ti o yan ẹrọ SWD ila, ati awọn ti o jẹ pataki lati lo awọn aṣayan -SWD. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si PC nipasẹ wiwo SWD, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ni wiwo kọọkan nipa lilo aṣayan –d.

IwUlO ifilọlẹ RF-Flasher: pa pipaṣẹ awọn oju-iwe rẹ
Lati lo ohun elo ifilọlẹ RF-Flasher lati nu oju-iwe akoonu iranti filasi lati ẹrọ kan pato,
pipaṣẹ erase_pages wa (lo –h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin):
RF-Flasher_Launcher.exe erase_pages –h
Pa lilo aṣẹ oju-iwe rẹ kuro
RF-Flasher_Launcher.exe erase_pages [-h](-UART |-SWD)(-gbogbo | -d DEVICE_ID) [-l] [- verbose {0, 1, 2, 3, 4}] [-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000, XNUMX}] [-s] (-p Awọn oju-iwe | -IGBAGBỌ RANGE)

Pa pipaṣẹ awọn ariyanjiyan aṣayan awọn oju-iwe rẹ

-gbogbo, –gbogbo: gbogbo awọn ẹrọ ti a ti sopọ (COM ibudo ni UART mode; ST-LINK ID, CMSIS-DAP ID, ati J-link ID ni SWD mode).
-d DEVICE_ID, -ẹrọ DEVICE_ID: ṣeto ID ti ohun elo hardware ti a lo fun asopọ (ibudo COM ni ipo UART; ID ST-LINK, ID CMSIS-DAP, ati ID J-Link ni ipo SWD).
-h, --iranlọwọ: ṣe afihan ifiranṣẹ iranlọwọ yii ati jade.
-l, --log: log data.
-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}, -igbohunsafẹfẹ
{5,15,25,50,100,125,240,480,900,1800,4000}: ṣeto iye igbohunsafẹfẹ (nikan fun SWD modality – ST-LINK hardware). Iwọn aiyipada jẹ 4000.
-p Awọn oju-iwe, –Oju-iwe: atokọ ti awọn oju-iwe lati parẹ (bẹrẹ ni 0).
-range RANGE RANGE, –range RANGE RANGE: orisirisi awọn oju-iwe lati parẹ (nibiti RANGE akọkọ tọkasi nọmba oju-iwe ti o kere julọ ati RANGE keji n tọka nọmba oju-iwe ti o ga julọ).
-s, --show: fi iranti filasi han lẹhin isẹ ṣiṣe.
-SWD, –-swd: SWD modality (ST-LINK, CMSIS-DAP, J-Link hardware siseto / n ṣatunṣe irinṣẹ).
-UART, –-uart: UART modality. Awọn igbimọ aṣa gbọdọ wa ni fi si ipo bootloader ṣaaju ṣiṣe iṣẹ yii. Fun awọn ẹrọ BlueNRG-LP ati BlueNRG-LPS, olumulo gbọdọ ṣeto PIN PA10 si iye ti o ga ati ki o ṣe atunto ẹrọ naa, titọju PA10 ni iye giga. Fun awọn ẹrọ BlueNRG-1 ati BlueNRG-2, olumulo gbọdọ ṣeto PIN DIO7 si iye ti o ga ati tunto ẹrọ naa, titọju DIO7 ni iye giga.
-ọrọ-ọrọ {0, 1, 2, 3, 4}, -ọrọ-ọrọ {0, 1, 2, 3, 4}: pọsi ọrọ-ọrọ iṣejade; ṣeto ipele yokokoro soke to 4 (nikan fun SWD modality ati log data). Iwọn aiyipada jẹ 2.
Ti ipo UART ba yan, ẹrọ naa gbọdọ ni asopọ si ibudo PC USB COM ati aṣayan –UART gbọdọ ṣee lo. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si awọn ebute oko USB PC, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ibudo COM kọọkan nipa lilo aṣayan –d.
Ti o ba ti SWD mode ti wa ni ti a ti yan, ohun SWD hardware siseto / n ṣatunṣe irinṣẹ gbọdọ wa ni ti sopọ si awọn ti o yan ẹrọ SWD ila, ati awọn ti o jẹ pataki lati lo awọn aṣayan -SWD. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si PC nipasẹ wiwo SWD, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ni wiwo kọọkan nipa lilo aṣayan –d.

IwUlO ifilọlẹ RF-Flasher: ka aṣẹ OTP
Lati lo ohun elo ifilọlẹ RF-Flasher lati ka OTP ti ẹrọ kan pato, aṣẹ read_OTP wa (lo –h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin):
RF-Flasher_Launcher.exe read_OTP –h
Ka OTP pipaṣẹ lilo
RF-Flasher_Launcher.exe read_OTP [-h] (gbogbo | -d DEVICE_ID) [-adirẹsi OTP_ADDRESS][-nọmba NUM] [-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000} [-l] s] [-ọrọ-ọrọ {0,1,2,3,4}]

Ka OTP pipaṣẹ iyan ariyanjiyan

-adirẹsi OTP_ADDRESS, –adirẹsi OTP_ADDRESS: adirẹsi agbegbe OTP (aiyipada: 0x10001800
- Ọrọ ti o ni ibamu).
-gbogbo, –gbogbo: gbogbo awọn ẹrọ ti a ti sopọ (ID ST-LINK ID, CMSIS-DAP ID, ati J-link ID ni ipo SWD).
-d DEVICE_ID, -ẹrọ DEVICE_ID: ṣeto ID ti ohun elo hardware ti a lo fun asopọ (ID ST-LINK ID, CMSIS-DAP ID, ati ID J-Link ni ipo SWD).
-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}, –frequency {5,15,25,50,100,125,240,480,900,1800,4000} – fun ST hardware mode (lori LINKD modality). Iwọn aiyipada jẹ 4000.
-h, --iranlọwọ: ṣe afihan ifiranṣẹ iranlọwọ yii ati jade.
-l, --log: log data.
-nọmba NUM, -nọmba NUM: nọmba awọn ọrọ lati ka inu agbegbe OTP. Iwọn aiyipada jẹ 256.
-s, –-show: fi agbegbe OTP han.
-ọrọ-ọrọ {0, 1, 2, 3, 4}, -ọrọ-ọrọ {0, 1, 2, 3, 4}: pọsi ọrọ-ọrọ iṣejade; ṣeto ipele yokokoro soke to 4 (nikan fun SWD modality ati log data). Iwọn aiyipada jẹ 2.

Akiyesi:
Aṣẹ read_OTP ṣiṣẹ nikan ni ipo SWD. Nitorinaa, ohun elo siseto ohun elo SWD / ohun elo n ṣatunṣe gbọdọ wa ni asopọ si awọn laini SWD ẹrọ ti o yan. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si PC nipasẹ wiwo SWD, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ni wiwo kọọkan nipa lilo aṣayan –d.

IwUlO ifilọlẹ RF-Flasher: kọ aṣẹ OTP
Lati lo ohun elo ifilọlẹ RF-Flasher lati ka OTP ti ẹrọ kan pato, aṣẹ write_OTP wa (lo –h lati gba atokọ ti gbogbo awọn aṣayan atilẹyin):
RF-Flasher_Launcher.exe write_OTP –h

Kọ OTP pipaṣẹ lilo
RF-Flasher_Launcher.exe write_OTP [-h] (gbogbo | -d DEVICE_ID) -adirẹsi OTP_ADDRESS
-iye OTP_VALUE [-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}] [-l] [- verbose {0,1,2,3,4}]

Kọ OTP pipaṣẹ iyan ariyanjiyan

-adirẹsi OTP_ADDRESS, –adirẹsi OTP_ADDRESS: adirẹsi ti agbegbe OTP (aiyipada: 0x10001800 – ọrọ deedee).
-gbogbo, –gbogbo: gbogbo awọn ẹrọ ti a ti sopọ (ID ST-LINK ID, CMSIS-DAP ID, ati J-link ID ni ipo SWD).
-d DEVICE_ID, -ẹrọ DEVICE_ID: ṣeto ID ti ohun elo hardware ti a lo fun asopọ (ID ST-LINK ID, CMSIS-DAP ID, ati ID J-Link ni ipo SWD).
-igbohunsafẹfẹ {5,15,25,50,100,125,240,480,900,1800,4000}, –frequency {5,15,25,50,100,125,240,480,900,1800,4000} – fun ST hardware mode (lori LINKD modality). Iwọn aiyipada jẹ 4000.
-h, --iranlọwọ: ṣe afihan ifiranṣẹ iranlọwọ yii ati jade.
-l, --log: log data.
-s, --show: fi iranti filasi han lẹhin isẹ ṣiṣe.
-iye OTP_VALUE, -iye OTP_VALUE: Iye OTP (ọrọ kan, gẹgẹbi 0x11223344)
-ọrọ-ọrọ {0, 1, 2, 3, 4}, -ọrọ-ọrọ {0, 1, 2, 3, 4}: pọsi ọrọ-ọrọ iṣejade; ṣeto ipele yokokoro soke to 4 (nikan fun SWD modality ati log data). Iwọn aiyipada jẹ 2.

Akiyesi:
Aṣẹ write_OTP ṣiṣẹ nikan ni ipo SWD. Nitorinaa, ohun elo siseto ohun elo SWD / ohun elo n ṣatunṣe gbọdọ wa ni asopọ si awọn laini SWD ẹrọ ti o yan. Ti ẹrọ diẹ ẹ sii ju ọkan lọ ni asopọ si PC nipasẹ wiwo SWD, aṣayan –all gba gbogbo wọn laaye lati yan. Ni omiiran, olumulo le pato ni wiwo kọọkan nipa lilo aṣayan –d.
IwUlO ifilọlẹ RF-Flasher: examples
Ṣeto aworan alakomeji lori BlueNRG-1 ati awọn ẹrọ BlueNRG-2 ti o sopọ pẹlu ohun elo ohun elo ST-LINK (ni ipo SWD):
RF-Flasher_Launcher.exe filasi -SWD -gbogbo -f “User_Application.hex” –l
Ṣeto aworan alakomeji lori awọn ẹrọ Bluetooth® Low ti a ti sopọ nipasẹ awọn ebute oko USB COM (ni ipo UART):
RF-Flasher_Launcher.exe filasi -UART -gbogbo -f "User_Application.hex" -l
Ṣeto aworan alakomeji lori awọn ẹrọ ti o sopọ nipasẹ ikanni CMSIS-DAP ni lilo piparẹ, rii daju, ati awọn aṣayan data wọle (ni ipo SWD):

Àtúnyẹwò itan

Table 3. Iwe itan àtúnyẹwò

Ọjọ	Ẹya	Awọn iyipada
15-Oṣu Karun-2018	1	Itusilẹ akọkọ.
03-Jul-2018	2	Nọmba imudojuiwọn 1. BlueNRG-1, BlueNRG-2 Flasher Utility, olusin 2. Flasher IwUlO UART window akọkọ, olusin 3. Flasher IwUlO UART mode: image file , olusin 4. Flasher IwUlO UART mode: ẹrọ iranti, olusin 5. Flasher IwUlO UART mode: iyipada iranti aaye, olusin 7. Flasher IwUlO: SWD akọkọ window, olusin 8. Flasher IwUlO SWD mode: ẹrọ iranti, olusin 10. Flasher IwUlO: SWD laifọwọyi mode, olusin 11. Flasher IwUlO: UART laifọwọyi mode, olusin 12. Flasher IwUlO: UART laifọwọyi siseto ti wa ni ti pari ati Figure 13. Flasher IwUlO: SWD Mac adirẹsi yiyan. Ọrọ kekere yipada jakejado iwe-ipamọ naa.
26-Kínní-2019	3	Imudojuiwọn Abala Iṣaaju ati Abala 3.1 UART mode: bi o si ṣiṣe. Ṣe afikun IwUlO ifilọlẹ Flasher Abala 8 ati gbogbo awọn apakan apakan rẹ.
09-Apr-2019	4	Itọkasi ti a ṣafikun si “Fọọmu Ohun elo” ni Abala 8: IwUlO ifilọlẹ RF-Flasher. Abala imudojuiwọn 8.4: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ filasi.
14-Jul-2020	5	Yi BlueNRG-1 ati BlueNRG-2 pada si BlueNRG-X Flasher package software Fi kun tọka si BlueNRG-LP ẹrọ. Nọmba imudojuiwọn 1. RF-Flasher IwUlO, olusin 3. IwUlO Flasher UART akọkọ window, olusin 5. Flasher IwUlO UART mode: Device Memory taabu, olusin 6. Flasher IwUlO UART mode: iyipada iranti aaye, olusin 9. IwUlO Flasher: SWD akọkọ window, olusin 10. Flasher IwUlO SWD mode: Device Memory taabu, olusin 14. Flasher IwUlO: SWD Plug & Play mode, olusin 15. Flasher IwUlO: Mac adirẹsi yiyan ati Figure 18. RF-Flasher nkan jiju: pipaṣẹ filasi pẹlu –parẹ, -l, -ṣayẹwo aṣayan
05-Oṣu kejila-2020	6	Ifihan Abala ti a ṣe imudojuiwọn, Abala 2.1: Awọn ibeere eto, Abala 4.1: Ipo UART: bii o ṣe le ṣiṣẹ, Abala 5: window akọkọ SWD, Abala 5.1: Ipo SWD: bii o ṣe le ṣiṣẹ, Abala 8.1: Awọn ibeere, Abala 8.2: Awọn aṣayan ohun elo ifilọlẹ RF-Flasher, Abala 8.3: IwUlO ifilọlẹ RF-Flasher: UART & Awọn ipo SWD, Abala 8.4: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ filasi, Abala 8.5: IwUlO ifilọlẹ RF-Flasher: aṣẹ kika, Abala 8.6. IwUlO ifilọlẹ RF-Flasher: pipaṣẹ piparẹ pupọ, Abala 8.7: IwUlO ifilọlẹ RF-Flasher: jẹrisi pipaṣẹ iranti. Fikun Abala 8.8: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ awọn oju-iwe rẹ.
04-Oṣu Kẹwa-2021	7	Fikun Abala 5.2: Ipo SWD: ka bootloader eka ati Abala 5.3: Ipo SWD: Ka agbegbe OTP. Ṣe imudojuiwọn akọle naa, Ifihan Abala, Abala 2: Bibẹrẹ, Abala 2.1: Awọn ibeere eto, Abala 2.2: Eto package sọfitiwia, Abala 3: wiwo irinṣẹ, Abala 4: window akọkọ UART, Abala 8: IwUlO ifilọlẹ Flasher RF-Flasher, Abala 8.1: Awọn ibeere, Abala 8.2: Awọn aṣayan ohun elo ifilọlẹ RF-Flasher, Abala 8.3: IwUlO ifilọlẹ RF-Flasher: UART & Awọn ipo SWD , Abala 8.4: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ filasi, Abala 8.5: IwUlO ifilọlẹ RF-Flasher: aṣẹ kika, Abala 8.6: RF-IwUlO ifilọlẹ Flasher: pipaṣẹ piparẹ pupọ, Abala 8.7: IwUlO ifilọlẹ RF-Flasher: jẹrisi pipaṣẹ iranti, Abala 8.8: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ aṣẹ awọn oju-iwe , Abala 1.1: Akojọ ti awọn acronyms ati Abala 1.2: Awọn iwe itọkasi.

Ọjọ	Ẹya	Awọn iyipada
		Nọmba imudojuiwọn 1. IwUlO RF-Flasher, Nọmba 2. Ṣe afiwe Meji Files taabu, olusin 3. IwUlO Flasher window akọkọ UART, olusin 4. IwUlO Flasher ipo UART: Aworan File taabu, olusin 5. Flasher IwUlO UART mode: Device Memory taabu, olusin 6. Flasher IwUlO UART mode: iyipada awọn aaye iranti, olusin 7. Flasher IwUlO mode: Afiwe Device Memory pẹlu Pipa File taabu, olusin 9. Flasher IwUlO: SWD akọkọ window, olusin 10. Flasher IwUlO SWD mode: Device Memory taabu, olusin 16. Flasher IwUlO: UART MAC adirẹsi siseto, olusin 17. Flasher IwUlO: SWD Mac adirẹsi siseto ati Figure 18. RF-Flasher nkan jiju: filasi pipaṣẹ pẹlu - -verase, -.l.
06-Apr-2022	8	Ti ṣafikun itọkasi BlueNRG-LPS jakejado iwe naa. Abala imudojuiwọn 8.3: IwUlO ifilọlẹ RF-Flasher: Awọn ipo UART & SWD ati Abala 8.4: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ filasi.
10-Jul-2024	9	imudojuiwọn: Akọle iwe Abala Ifihan Abala 1.1: Akojọ ti awọn acronyms Abala 1.2: Awọn iwe itọkasi olusin 1. RF-Flasher IwUlO Abala 3: Toolbar ni wiwo olusin 3. Flasher IwUlO UART akọkọ window Abala 4.1: Ipo UART: bi o ṣe le ṣiṣẹ Abala 5: SWD akọkọ window Abala 5.1: Ipo SWD: bi o ṣe le ṣiṣẹ olusin 12. Flasher IwUlO SWD mode: ka bootloader Abala 5.3: Ipo SWD: ka agbegbe OTP olusin 14. Flasher IwUlO: SWD Plug&Play mode Abala 7: Mac adirẹsi siseto Abala 8.1: Awọn ibeere Abala 8.2: Awọn aṣayan ohun elo ifilọlẹ RF-Flasher Abala 8.3: IwUlO ifilọlẹ RF-Flasher: UART & Awọn ipo SWD Abala 8.4: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ filasi Abala 8.5: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ kika Abala 8.6: IwUlO ifilọlẹ RF-Flasher: pipaṣẹ piparẹ pupọ Abala 8.7: IwUlO ifilọlẹ RF-Flasher: jẹrisi pipaṣẹ iranti Abala 8.8: IwUlO ifilọlẹ RF-Flasher: pa pipaṣẹ awọn oju-iwe rẹ Abala 8.9: IwUlO ifilọlẹ RF-Flasher: ka aṣẹ OTP Abala 8.10: IwUlO ifilọlẹ RF-Flasher: kọ aṣẹ OTP

AKIYESI PATAKI – KA SARA
STMicroelectronics NV ati awọn ẹka rẹ (“ST”) ni ẹtọ lati ṣe awọn ayipada, awọn atunṣe, awọn imudara, awọn atunṣe, ati awọn ilọsiwaju si awọn ọja ST ati/tabi si iwe-ipamọ nigbakugba laisi akiyesi. Awọn olura yẹ ki o gba alaye tuntun ti o wulo lori awọn ọja ST ṣaaju gbigbe awọn aṣẹ. Awọn ọja ST jẹ tita ni ibamu si awọn ofin ati ipo ST ti tita ni aye ni akoko ifọwọsi aṣẹ.
Awọn olura nikan ni iduro fun yiyan, yiyan, ati lilo awọn ọja ST ati ST ko dawọle kankan fun iranlọwọ ohun elo tabi apẹrẹ awọn ọja awọn olura.
Ko si iwe-aṣẹ, ṣalaye tabi mimọ, si eyikeyi ẹtọ ohun-ini ọgbọn ti a fun ni nipasẹ ST ninu rẹ.
Tita awọn ọja ST pẹlu awọn ipese ti o yatọ si alaye ti a ṣeto sinu rẹ yoo sọ atilẹyin ọja eyikeyi di ofo fun iru ọja bẹẹ.
ST ati aami ST jẹ aami-iṣowo ti ST. Fun afikun alaye nipa ST aami-išowo, tọkasi lati www.st.com/trademarks. Gbogbo ọja miiran tabi awọn orukọ iṣẹ jẹ ohun-ini ti awọn oniwun wọn.
Alaye ti o wa ninu iwe yii bori ati rọpo alaye ti a ti pese tẹlẹ ni eyikeyi awọn ẹya iṣaaju ti iwe yii.
© 2024 STMicroelectronics – Gbogbo ẹtọ wa ni ipamọ
UM2406 – Ìṣí 9

Awọn iwe aṣẹ / Awọn orisun

STMicroelectronics UM2406 Apo Software IwUlO RF-Flasher [pdf] Afowoyi olumulo
UM2406, UM2406 Apo sọfitiwia IwUlO RF-Flasher, Iṣakojọpọ sọfitiwia IwUlO RF-Flasher, Apo sọfitiwia IwUlO RF-Flasher, Package Software IwUlO, Iṣakojọpọ Software, Package

Awọn itọkasi

Itọsọna olumulo

STMicroelectronics UM2406 Apo Software IwUlO RF-Flasher

Awọn ilana Lilo ọja