Mataupu lalafi
1 STMicroelectronics UM2406 Le RF-Flasher Utility Software Package
2 Fa'atonuga o le Fa'aaogaina o Mea
3 Folasaga
4 Fa'amatalaga lautele
5 Amataina
6 Fa'aoga meafaigaluega
7 SWD faamalama autu
8 Polokalame tuatusi MAC
9 RF-Flasher faʻaoga faʻaoga
10 Toe iloilo tala'aga
11 Pepa / Punaoa
11.1 Fa'asinomaga
12 Fa'amatalaga Fa'atatau

STMicroelectronics-LOGO

STMicroelectronics UM2406 Le RF-Flasher Utility Software Package

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package-PRODUCT

Fa'amatalaga

  • Lagolago BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ma BlueNRG-2 masini
  • Fesootaiga: UART mode ma SWD mode
  • Fa'aaliga: Polokalame fa'amanatu fa'afoma'i, faitau, solo tele, fa'amaoniga o mea
  • Manaoga Faiga: 2 GB o le RAM, uafu USB, Adobe Acrobat Reader 6.0 pe mulimuli ane

Fa'atonuga o le Fa'aaogaina o Mea

Amataina
O lenei vaega o loʻo tuʻuina atu ai faʻamatalaga e uiga i mea e manaʻomia e le polokalama ma le setiina o pusa polokalama.

System Manaoga:

  • Le itiiti ifo i le 2 GB o le RAM
  • Uafu USB
  • Adobe Acrobat Reader 6.0 pe mulimuli ane
  • Fautuaina fa'aaliga fua ma fa'atulagaga e o'o atu i le 150%

Seti o Paketi Polokalama:
Ina ia faʻaogaina le aoga, kiliki i luga o le RF-Flasher utility icon o loʻo i le [Amata] > [ST RF-Flasher Utility xxx] > [RFFlasher Utility].

Toolbar Interface
I le vaega o meafaigaluega o le RF-Flasher faʻamalama autu, e mafai e tagata faʻaoga ona faʻatino gaioiga nei:

  • Tu'u se .bin po'o le .hex o iai file: [File] > [Tatala file…]
  • Faasaoina le ata manatua o iai nei: [File] > [Faasao File E pei…]
  • Tapuni se .bin po'o le .hex file: [File] > [Tapuni file]
  • Seti le ala ST-LINK: [Meafaigaluega] > [Fa'atonu...]
  • Fa'amalo pe tape le ogalaau file fatuga: [Meafaigaluega] > [Fa'atonu...]

FAQ

  • O a masini o lo'o lagolagoina e le RF-Flasher utility software package?
    O lo'o lagolagoina nei e le polokalame polokalame BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ma BlueNRG-2 masini.
  • O le a le mea e mana'omia mo le fa'aogaina o le RF-Flasher?
    O mea la'ititi e mana'omia e aofia ai le itiiti ifo i le 2 GB o le RAM, USB ports, ma le Adobe Acrobat Reader 6.0 pe mulimuli ane.
  • E fa'afefea ona ou fa'asaoina le ata manatua o lo'o iai nei ile fa'aoga RF-Flasher?
    Ina ia teu le ata manatua o lo'o i ai nei, alu i le [File] > [Faasao File As…] ma filifili le vaega e manatua e teu i se .bin file.

UM2406
Fa'aoga tusi lesona

Le RF-Flasher fa'apipi'i polokalama fa'aoga

Folasaga

O lenei pepa o loʻo faʻamatalaina ai le RF-Flasher utility software package (STSW-BNRGFLASHER), lea e aofia ai le RF-Flasher utility PC application.
O le aoga RF-Flasher o se talosaga PC tutoʻatasi, lea e mafai ai e le BlueNRG-1, BlueNRG-2, BlueNRG-LP, ma le BlueNRG-LPS Bluetooth® Low Energy system-on-chip flash memory ona faitau, tape tele, tusia, ma faapolokalameina.
O loʻo lagolagoina nei le faʻaoga i le BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ma le BlueNRG-2 flash memory e ala i le UART mode e faʻaaoga ai le masini UART bootloader i totonu. O loʻo lagolagoina nei foʻi le faʻaoga i le BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ma le BlueNRG-2 flash memory e ala i le SWD mode e ala i le faʻaogaina o le SWD faʻataʻitaʻiga masani e ala i mea faʻapipiʻi faʻapipiʻi / debugging meafaigaluega (CMSIS-DAP, ST-LINK. , ma le J-Link).
E le gata i lea, e mafai ai foi ona teuina se tuatusi MAC i totonu o se nofoaga e manatua ai le moli e filifilia e le tagata faʻaoga i le UART ma le SWD modes.
O le RF-Flasher software package o loʻo tuʻuina atu ai foʻi se faʻaoga tuʻufaʻatasia mo le faʻamalama uila, faʻatagaina polokalame e manatua ai le flash, faitau, tape tele, ma faʻamaonia mea. E mana'omia e le fa'aogaina o le flasher se fa'amalama PC DOS.

Fa'aaliga:
Ole upu RF ile taimi nei ole BlueNRG-LP, BlueNRG-LPS, BlueNRG-1, ma BlueNRG-2 masini. So'o se eseesega fa'apitoa e fa'amamafa pe a mana'omia.

Fa'amatalaga lautele

Lisi o acronyms

Laulau 1. Lisi o acronyms

Vaitaimi Uiga
RF Leitio taimi
SWD Debug uaea fa'asologa
UART Universal asynchronous receiver-transmitter
USB pasi fa'asologa lautele

Pepa fa'asinomaga

Laulau 2. Pepa fa'asinomaga

Fa'asinomaga Ituaiga Ulutala
DS11481 BlueNRG-1 fa'amaumauga Polokalama Bluetooth® Low Energy SoC uaealesi
DS12166 BlueNRG-2 fa'amaumauga Polokalama Bluetooth® Low Energy SoC uaealesi
DB3557 STSW-BNRGFLASHER faʻamatalaga puʻupuʻu Fa'amatalaga puupuu mo le RF-Flasher software package
DS13282 BlueNRG-LP fa'amaumauga Polokalama Bluetooth® Low Energy SoC uaealesi
DS13819 Pepa pepa BlueNRG-LPS Polokalama Bluetooth® Low Energy SoC uaealesi

Amataina

O lenei vaega o lo'o fa'amatala uma ai mana'oga mo le fa'agaoioia o le RF-Flasher fa'aoga PC fa'aoga ma le fa'asologa o le fa'apipi'iina o pusa polokalama.

Mana'oga fa'aoga
Ole fa'aoga RF-Flasher o lo'o i ai tulaga mana'omia pito i lalo:

  • PC fa'atasi ai ma le Intel® po'o le AMD processor o lo'o fa'agaoioia le faiga fa'aoga Microsoft® nei:
    • Windows® 10
  • Le itiiti ifo i le 2 GB o le RAM
  • Uafu USB
  • Adobe Acrobat Reader 6.0 pe mulimuli ane
  • Fautuaina fa'aaliga fua ma fa'atulagaga e o'o atu i le 150%.

Seti o pusa polokalame
E mafai e le tagata fa'aoga ona fa'agaoioia lenei fa'aoga e ala i le kiliki i le RF-Flasher utility icon ([Amata]>[ST RF-Flasher Utility xxx]>[RF-Flasher Utility]).

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (1)

Fa'aoga meafaigaluega

I le vaega o meafaigaluega o le RF-Flasher faʻamalama autu, e mafai e le tagata faʻaoga ona faʻatino gaioiga nei:

  • La'u se .bin po'o le .hex (Intel fa'alautele) file, fa'aaogaina [File]>[Tatala file…]
  • Faasaoina le ata manatua o loo i ai nei i totonu o se .bin file, fa'aaogaina [File]>[Faasaoina File E pei…]. Le tuatusi amata ma le tele o le vaega manatua e teu i le file e mafai ona filifilia mai le mea e manatua ai masini.
  • Tapuni se .bin po'o le .hex file, fa'aaogaina [File]>[Tapuni file]
  • Seti le laina ST-LINK, fa'aaoga [Meafaigaluega]>[Seti…]
  • Fa'amalo pe tape le ogalaau file fatuga ile faiga UART/SWD, fa'aoga [Meafaigaluega]]>[Seti...]. Afai ogalaau files ua faasaoina, e mafai ona seti le tulaga o debug faamatalaga e faasaoina (mo SWD naʻo). Ogalaau uma files o lo'o fa'asaoina ile {install llation path}\ST\RF-Flasher Utility xxx\Logs\.
  • Aveese tele, fa'aaoga [Meafaigaluega]>[Mass tape].
  • Fa'amaonia mea e manatua ai le moli [Meafaigaluega]]>[Fa'amaonia mea fa'amalama].
  • Maua le lomiga o talosaga, faaaoga [Fesoasoani]>[About].
  • La'u mai a file, fa'aaoga [Meafaigaluega]>[Flash].
  • Aveese vaega o masini, fa'aaoga [Meafaigaluega]>[Tape Itulau...]
  • Faatusatusa le manatua o le masini ma le ata ua filifilia file, fa'aaoga [Meafaigaluega]]>[Faatusatusa le Mea Manaomia ma file]. O le ata e lua files o loʻo faʻaalia i totonu o le Faʻatusatusaga o Meafaigaluega ma le Ata File tab ma eseesega e fesootai o loo faailogaina i le mumu.
  • Faatusatusa le lua files, fa'aaoga [File]>[Faatusatusa le lua files]
  • Faitau le vaega o le uta uta (na'o le SWD mode), fa'aaoga [Meafaigaluega]]>[ Faitau le Vaega o le Bootloader (SWD)].
  • Faitau le vaega o le OTP (na'o le SWD mode), fa'aaoga [Meafaigaluega]>[Faitau le OTP Area (SWD)].
  • Fa'asao vaega fa'apipi'i po'o vaega OTP i totonu o le .bin file, fa'aaogaina [File]>[Faasaoina File E pei…].

E mafai foi e le tagata faaaoga ona filifili ata e lua files ma faatusatusa i latou. Le ata e lua files o loʻo faʻaalia i le Faatusatusa Lua Files tab ma eseesega e fesootai o loo faailogaina i le mumu. .bin ma .hex file e lagolagoina fomu.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (2)

I le vaega pito i luga o le RF-Flasher utility main window, e mafai e le tagata faʻaoga ona filifili le ata file e ala i le [Filifili Ata File] faamau. E mafai e le tagata fa'aoga ona filifili le ituaiga o manatua: flash memory, bootloader, po'o le vaega OTP. Mo le vaega e manatua ai le moli, e mafai e le tagata fa'aoga ona seti le tuatusi amata (na'o le talone file)
O nei filifiliga uma e maua ile UART ma le SWD mode.
E manaʻomia e le tagata faʻaoga le avanoa i le auala filifilia (UART poʻo SWD). E mafai ona latou faia lenei mea e ala i le tatalaina o le COM uafu fesoʻotaʻi mo le UART mode, poʻo le faʻafesoʻotaʻi o se SWD hardware programming / debugging meafaigaluega i le masini SWD laina.

UART faamalama autu
I le UART main window tab o le RF-Flasher utility main window, e mafai e le tagata faʻaoga ona filifili le COM port e faʻaoga e faʻaoga ai le masini e ala i le Lisi o COM Ports vaega.
Ole fua fa'atatau ole laina ole fa'aogaina mo le komiti su'esu'e masini RF e 460800 bps.
STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (3)

UART mode: faʻafefea ona tamoe
Ata file filifiliga
Le utaina o se .bin po'o le .hex file, faaaoga le [Filifili Ata File] faamau i luga o le itulau autu, fa'asaga i le [File]>[Tatala File…], pe alu i le Ata File laupepa. Le ala atoa o le filifiliga file o lo'o fa'aalia i tafatafa o le fa'amau ma le [Flash] fa'amau e fa'agaoioia pe a file ua utaina.
O le lisi o COM Ports tab o loʻo faʻaalia uma masini fesoʻotaʻi i luga o pusa USB USB. O fa'amau [Filifili Uma], [Le Filifili Mea Uma], ma le [Va'i Mea Uma] e mafai ai e le tagata fa'aoga ona fa'amatala po'o fea masini feso'ota'i (uma, leai, po'o nisi o ia mea) e tatau ona fa'atatau i galuega fa'aoga. I lenei auala, o le gaioiga lava lea e tasi (o lona uiga, polokalame flash memory) e mafai ona faia i le taimi e tasi i luga o masini e tele. O le [Refresh] button e mafai ai e le tagata fa'aoga ona fa'afouina le lisi o masini feso'ota'i.
Ona o le faaletonu, o le filifiliga [Mass erase] i le vaega [Actions] e le o siakiina, ma na o itulau manatua e manaʻomia e tape ma tusia i le file anotusi. A siaki lenei filifiliga, o le solo atoa o le tele e muamua atu i le vaega o polokalame o le flash memory programming.
O le filifiliga [Verify] e fa'amalosia ai se siaki e fa'amautinoa ai ua sa'o le tusiaina o mea e manatua.
Siaki le filifiliga [Update Device Memory] e fa'afou ai le laulau e manatua ai masini pe a uma se ta'otoga i le flash memory.
O le filifiliga mo le puipuiga o le faitau e mafai ai ona puipuia le faitau tusi o le masini pe a uma le polokalame o manatuaga moli.
Siaki le filifiliga [Auto Baudrate] pe afai e faia se toe setiina o meafaigaluega i luga o le laupapa e faamalosia ai le [Auto Baudrate]. Ona o le faaletonu, o le filifiliga [Auto Baudrate] e le o siakiina.

O le Ata File laupepa
O le filifilia file igoa, lapopoa, ma mea o lo'o fa'avasegaina e fa'apolokalameina i le masini manatua flash e mafai viewed i le Ata File laupepa.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (4)

O le mea e manatua ai masini
Filifili le lisi lea e view o mea e manatua i totonu o se masini feso'ota'i (e ala i le [Faitau] faamau) ma le ogalaau o lo'o iai fa'agaioiga e faia i luga o le masini filifilia.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (5)

Kiliki i luga o le [Faitau] faamau e fesiitai ai le vaega o le manatua ua faamatalaina e le [Amata Tuatusi ma le Tele] i totonu o le laulau.
Ina ia faitau atoa le manatuaga moli, siaki le filifiliga [Entire Memory].
O le koluma muamua o loʻo tuʻuina atu ai le tuatusi faʻavae o le 16 paita o loʻo mulimuli mai i se laina (mo le example, laina 0x10040050, koluma 4 o loʻo i ai le tau o le hexadecimal byte ile 0x10040054. E mafai e le tagata fa'aoga ona suia le tau o le byte e ala i le kiliki-lua o se cell ma ulufale i se tau hexadecimal fou. O paita ua fa'asa'oina e aliali mai i le mumu.
Kiliki i le [Tusi] faamau e fa'apolokalame ai le itulau atoa ma fa'atauga fou byte i totonu o le masini flash memory.
O le faamau [Flash] e mafai ai ona amata se polokalame e manatua ai le flash i le filifiliga ua filifilia. Afai e siaki le pusa siaki [MAC Address], e mafai e le tagata faʻaoga ona faʻamaonia le tuatusi manatua o loʻo teuina ai le tuatusi MAC filifilia. A kiliki le [Flash] ki, o le tuatusi MAC e faʻapipiʻiina pe a uma le ata file.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (6)

O le Fa'atusatusaga o le Meafaigaluega ma le Ata File laupepa
E mafai e le tagata faʻaoga ona faʻatusatusa le manatuaga masini o loʻo iai nei ma le ata filifilia file. O le ata e lua files o loʻo faʻaalia ma soʻo se eseesega e faʻamaonia i le mumu. .bin ma .hex files format e lagolagoina.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (6) Fa'aaogā le fa'aoga RF-Flasher ma isi laupapa
O le aoga RF-Flasher e otometi lava ona iloa le BlueNRG-1, BlueNRG-2, BlueNRG-LP, ma BlueNRG-LPS laupapa iloiloga (fa'aalia e pei o le STDK) e feso'ota'i i le PC USB ports. E faʻaaogaina se fesoasoani STM32 (faʻatonuina e le GUI) e toe setiina le masini ma tuʻu i le UART bootloader mode.
O loʻo galue foi le talosaga i laupapa faʻapitoa, tuʻuina atu faigofie UART avanoa i le masini fesoʻotaʻi, ae tatau i le tagata faʻaoga ona tuʻu le masini i le bootloader mode ma le lima. I luga o le filifilia o soʻo se ports e le o STEVAL COM, o le pop-up lea e aliali mai:

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (8)

A faʻaalia lenei pop-up ma faʻalagolago i le ituaiga masini, o loʻo faʻagaoioia le mode bootloader e pei ona taua i lalo:

  • Mo masini BlueNRG-LP ma BlueNRG-LPS, e tatau i le tagata faʻaoga ona seti le PA10 pine i se tau maualuga ma faʻatino se toe setiina o le masini (tausia PA10 i se tau maualuga).
  • Mo masini BlueNRG-1 ma BlueNRG-2, e tatau i le tagata faʻaoga ona seti le DIO7 pine i se tau maualuga ma toe faʻafoʻi le masini (tausia DIO7 i se tau maualuga).

E mafai fo'i e le tagata fa'aoga ona fa'atulaga se fua fa'atatau mo le UART i le fa'amalama fa'apopole ona oomi lea o le OK e toe fo'i i le GUI.

Fa'aaliga:
E tatau i le tagata faʻaoga ona aloese mai le toe setiina o le masini aʻo faʻaogaina le RF-Flasher aoga, seʻi vagana ua faʻagaoioia le ComPort Set pop-up. Afai e toe setiina le masini, e tatau i le tagata faʻaoga ona sui le COM port e toe faʻaoga ai le faʻaogaina o le Flasher.

Fa'aaliga:
Pe a faʻaaogaina laupapa faʻapitoa e ala i le tuʻuina atu o le UART avanoa i le BlueNRG-1, BlueNRG-2, BlueNRG-LP, ma BlueNRG-LPS masini e ala i le USB FTDI interface, e tatau i le tagata faʻaoga ona faʻalua le siakiina o le latency e fesoʻotaʻi ma le USB FTDI PC avetaʻavale. O lenei mea e mafai ai ona iloa le taulaga fesoʻotaʻi o se USB virtual COM. I luga o le USB-FTDI PC aveta'avale masani, siaki fa'alua le masini feso'ota'i fa'atulagaina ta'avale USB i totonu [Properties]>[Port
Fa'atonu]>[Atua]. Ia mautinoa ua seti le tau o le taimi o le latency i le 1 ms. O lenei fa'atulagaga e matua fautuaina lava e fa'avavevave ai fa'agaioiga flash memory i luga o laupapa fa'apitoa.

SWD faamalama autu

Ina ia fa'aogaina le fa'amalama fa'amalama autu a le SWD i le fa'amalama autu o le RF-Flasher, e tatau i le tagata fa'aoga ona fa'afeso'ota'i le SWD hardware programming/debugging tool i le masini SWD laina (BlueNRG-1, BlueNRG-2, BlueNRG-LP, ma BlueNRG-LPS masini. ).
O feso'ota'iga fa'akomepiuta a le SWD o lo'o mulimuli mai o lo'o lagolagoina, fa'apea o masini filifilia ma mea faigaluega fa'akomepiuta e feso'ota'i e lagolagoina le masini feso'ota'i:

  1. CMSIS-DAP
  2. ST-LINK
  3. J-So'otaga

Manatua
Ina ia faʻaogaina le J-Link e fai ma faʻapipiʻi faʻapipiʻi, e manaʻomia le suia o le avetaavale USB mai le avetaʻavale J-Link i le WinUSB. E mafai ona faigofie lenei mea e ala i le faʻaaogaina o le meafaigaluega HYPERLINK Zadig (https://zadig.akeo.ie) e pei ona taua i lalo:

  • Filifili J-Link mai le lisi o masini
  • Filifili "WinUSB" e avea ma avetaavale
  • Kiliki i luga [Install Driver] e faʻapipiʻi le avetaavale WinUSB

Fa'aaliga:
Va'ai ile HYPERLINK J-Link OpenOCD webnofoaga (https://wiki.segger.com/OpenOCD) mo nisi faamatalaga.

Fa'aaliga:
LAPATA'IGA: A uma loa ona sui le J-Link USB aveta'avale, e leai se SEGGER software mai le J-Link software package e mafai ona feso'ota'i ma J-Link. Ina ia toe fa'aogaina le SEGGER J-Link software, e mana'omia ona toe sui le aveta'avale USB i lona faaletonu.
STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (8)

SWD mode: fa'afefea ona tamo'e
Ata file filifiliga
Fa'aoga le [Filifili Ata File] faamau i le itulau autu pe alu i le [File]>[ Tatala File…] e utaina se .bin po o .h ex file. Le ala atoa o le filifiliga file o lo'o fa'aalia i tafatafa o le ki ma o le [Flash] o lo'o fa'agaoioia i le pito o le file utaina.
I le Fa'asagaga tab, e mafai e le tagata fa'aoga ona filifili filifiliga nei:

  • [Fa'amaonia]: fa'amalosi se siaki e fa'amautinoa ai ua sa'o le tusiaina o mea e manatua
  • [Puipuiga o le faitau]: e mafai ai e le masini le puipuiga o le faitau pe a uma le polokalame o le ata ua filifilia file
  • [Mass tape]: fa'ataga le tape tele o le masini e fa'atino a'o le'i fa'apolokalame le ata filifilia file
  • [Fa'afou le Manatu o Meatotonu]: fa'ataga le laulau e manatua ai masini e fa'afou pe a mae'a se fa'agaioiga fa'apolokalame manatua
  • [Plug&Play mode]: fa'ataga le polokalame fa'apolokalame fa'apipi'i-ma-ta'alo e mafai ona fa'agaoioi/fa'aletonu pe a na'o le tasi le meafaigaluega polokalame SWD e maua. I lenei tulaga, o laupapa e faʻapipiʻiina taʻitasi. A maeʻa le faʻaogaina o polokalame i luga o le tasi laupapa, e mafai ona tatala ma faʻapipiʻi le isi laupapa.

Ona o le faaletonu, o le filifiliga [Mass erase] i tafatafa o le [Flash] button e le o siakiina, ma na o itulau manatua e manaʻomia e tape ma tusia i le file anotusi.
O le [Lisi o feso'ota'iga feso'ota'iga] e fa'aalia uma feso'ota'iga SWD feso'ota'i (CMSIS-DAP,ST-LINK, ma le J-Link). Oomi le [Refresh] faamau e faafou ai le lisi o feso'ota'iga feso'ota'i.
E mafai fo'i e le tagata fa'aoga ona filifili po'o fea fa'aoga fa'apitoa SWD hardware e tatau ona fa'aalia e ala i le [Fa'aoga] fanua.
O fa'amau [Filifili Uma], [Le Filifili Mea Uma], ma [Fa'aliliuina Uma] e mafai ai e le tagata fa'aoga ona fa'amalamalama po'o fea feso'ota'iga SWD (uma, leai, po'o nisi o latou) e tatau ona avea ma fa'amoemoega o galuega fa'aoga. I lenei auala, o le gaioiga lava lea e tasi (o lona uiga, polokalame flash memory) e mafai ona faia i le taimi e tasi i le tele o masini.
O le faamau [Flash] e mafai ai ona amata se polokalame e manatua ai le flash i le filifiliga ua filifilia. Afai e siaki le pusa siaki [MAC Address], e mafai e le tagata faʻaoga ona faʻamaonia le tuatusi manatua o loʻo teuina ai le tuatusi MAC filifilia. A kiliki le [Flash] ki, o le tuatusi MAC e faʻapipiʻiina pe a uma le ata file.
'Ata File' tab
O le filifilia file igoa, lapopoa, ma mea o lo'o fa'avasegaina e fa'apolokalameina i le masini manatua flash e mafai viewed i le Ata File laupepa.

O le mea e manatua ai masini
Filifili le lisi lea e view o mea e manatua i totonu o se masini feso'ota'i (e ala i le [Faitau] faamau) ma le ogalaau o lo'o iai fa'agaioiga e faia i luga o le masini filifilia.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (10)

Kiliki le [Fa'atau] faamau e fa'afeiloa'i ai le vaega o manatua e fa'amatalaina e le [Amata Tuatusi ma le Tele] i totonu o le laulau.
Ina ia faitau atoa le manatuaga moli, siaki le filifiliga [Entire Memory].
O le koluma muamua o loʻo tuʻuina atu ai le tuatusi faʻavae o le 16 paita o loʻo mulimuli mai i se laina (mo le example, laina 0x10040050, koluma 4 o loʻo i ai le tau o le hexadecimal byte ile 0x10040054. E mafai e le tagata fa'aoga ona suia tulaga o le byte e ala i le kiliki-lua o se sela ma ulufale i se tau hexadecimal fou. O paita ua fa'asa'oina e aliali mai i le mumu.
Kiliki i le [Tusi] faamau e fa'apolokalame ai le itulau atoa ma fa'atauga fou byte i totonu o le masini flash memory.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (11)

Fa'aaliga:
[Faatusatusa masini Manatua i File] o loʻo lagolagoina foʻi i le SWD mode, faʻatasi ai ma foliga tutusa e pei ona faʻamatalaina i le Vaega 4.1: UART mode: faʻafefea ona tamoe.

Faiga SWD: faitau vaega fa'apipi'i
E mafai e le tagata fa'aoga ona faitau le vaega fa'apipi'i o le masini fa'afeso'ota'i e ala i le SWD hardware programming interface e ala i le filifili [Meafaigaluega]]> [Read Bootloader Sector (SWD)]. O lo'o fa'aalia le vaega fa'apipi'i i le fa'ailoga Bootloader/OTP.

Fa'aaliga:
O lenei vaega e lagolagoina na'o le SWD mode ma na'o le GUI e mafai ona maua.STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (12)

Faiga SWD: faitau vaega OTP
E mafai e le tagata fa'aoga ona faitau le masini feso'ota'i o le OTP (pe a lagolagoina) e ala i le SWD hardware programming interface e ala i le filifili [Meafaigaluega]>[Faitau le OTP Area (SWD)]. O loʻo faʻaalia le mea o loʻo i totonu ole OTP i le Bootloader/OTP tab.
E le lagolagoina lenei vaega ile faiga UART.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (13)

SWD Plug&Play faiga polokalame
O le SWD Plug&Play polokalame polokalame e mafai ai e le tagata fa'aoga ona ulufale i se fa'apolokalame matasele e ala i le fa'afeso'ota'i o se masini fou e fa'apolokalameina. A o le ata manatua flash file ma ua filifilia gaioiga faʻapolokalame, ole talosaga Flasher PC ole tagata faʻaoga e faʻafesoʻotaʻi se masini i le SWD interface (o loʻo faʻaalia le faʻatali mo le masini N. 1 savali).
A faʻafesoʻotaʻi e le tagata faʻaoga le masini, o loʻo faʻaalia se savali fesoʻotaʻi Device N. 1, ma o le talosaga e amata faʻapipiʻi le masini ma le ata filifilia. file ma filifiliga. A maeʻa le faʻaogaina o le polokalame, o le Flasher application e faʻaalia le feʻau Faʻamolemole vavae le masini N. 1. A faʻateʻaina e le tagata faʻaoga le masini, o loʻo faʻaalia le feʻau Faʻatali mo le masini N. 2. E mafai e le tagata fa'aoga ona taofi lenei faiga otometi e ala i le oomiina o le [Stop] button.
Pe a faʻaogaina le faʻaogaina o le Plug&Play, e tatau i le tagata faʻaoga ona filifili le faʻaoga e faʻaaogaina (CMSIS-DAP, ST-LINK, poʻo le J-Link).

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (14)

Polokalame tuatusi MAC

O polokalame ole tuatusi MAC e mafai ai ona teuina le tuatusi MAC i se nofoaga e manatua ai moli i luga ole masini.
E mafai e le tagata fa'aoga ona filifili e fa'agaoioia lenei filifiliga pe leai e ala i le siakiina pe fa'a'ese'ese le pusa siaki [MAC address]. O le nofoaga patino e manatua ai moli e seti i le [MAC Flash nofoaga] fanua.
O le [Set MAC address] button e mafai ai e le tagata faʻaoga ona filifili le tuatusi MAC e pei ona taua i lalo:

  1. Siaki le pusa siaki [Range] ma tuu atu le tuatusi amata i le [Tulaga Amata] fanua. O le tuatusi amata o le tuatusi MAC e teuina i luga o le masini fesoʻotaʻi muamua.
    • E mafai ona seti laasaga faʻaopoopo e amata mai i le tau o le [Amata Amata] e ala i le tuʻuina o numera o laupapa e faʻapipiʻiina i le Num. Laupapa laupapa, po'o le fa'aofiina o le tau o le [End Address]:
    • Afai ua filifilia le faiga otometi i le Fa'asagaga tab, o le lisi o tuatusi MAC filifilia e fa'aoga mo le fa'agaioiina o polokalame otometi. Afai e leai, e na'o le tasi le masini e fa'apolokalameina, e fa'aaoga ai le [Tulaga Amata] fanua.
  2. E mafai e le tagata faʻaoga ona tuʻuina atu se lisi o tuatusi MAC e faʻaaogaina e ala i se faʻaoga file:
    • Siaki le [File] pusa fa'ailoga ma filifili le mea e tu'u i totonu file i le [Uta File] fanua.
    • Afai ua filifilia le faiga otometi i le Fa'asagaga tab, o le lisi o tuatusi MAC filifilia e fa'aoga mo le fa'agaioiina o polokalame otometi. Afai e leai, e na'o le tuatusi muamua e fa'aoga mo se fa'agaioiga polokalame e tasi.

O le pusa siaki [Save MAC Address log] e mafai ai ona teuina le lisi o tuatusi MAC fa'aoga i totonu o se file, filifilia i le [File Igoa] fanua.
E mafai ona tuʻufaʻatasia polokalame faʻapipiʻi MAC ma le faiga faʻapipiʻi otometi. Mo masini fesootai taitasi, le ata file ua fa'apolokalame muamua, sosoo ai ma le tuatusi MAC. Le numera o tuatusi MAC filifilia
(fa'aopoopo le tele o le lisi o tuatusi po'o mea fa'aoga file tele) fa'aosoina le fa'ai'uga o fa'agaioiga fa'apolokalame otometi. O tuatusi MAC uma ua fa'apolokalameina o lo'o fa'aalia i le fa'amalama o le Log.
Ole polokalame ole tuatusi MAC e lagolagoina ile UAR ma le SWD mode.

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (15) STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (16) STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (17)

E mafai e le tagata fa'aoga ona filifili pe o se taimi pe leaiamp ua fa'aopoopo i le fa'amaumauga o le tuatusi MAC ua fa'asaoina file igoa (e pei o se suffix).
Afai o le taimiamp e le fa'aopoopoina i le igoa o le ogalaau file, o fa'amatalaga fa'amatalaga uma o lo'o fa'asaoina i le ogalaau e tasi file. Afai o le taimiamp ua fa'aopoopoina, o fa'amatalaga ogalaau mo ta'aloga ta'itasi o lo'o fa'asaoina i se isi ogalaau file.
Le igoa o le ogalaau file e mafai ona faʻamaonia e faʻaaoga ai le [File Igoa] fanua.

RF-Flasher faʻaoga faʻaoga

O le RF-Flasher launcher o se fa'aoga tuto'atasi e mafai ai e le tagata fa'aoga ona fa'atautaia tulafono fa'aoga RF-Flasher e fa'aaoga ai le RF-Flasher utility GUI.
E mana'omia se fa'amalama fa'atonu DOS ma o lo'o lagolagoina uma auala UART ma SWD (fa'aaoga le .bin ma le .hex image files).
O le RF-Flasher launcher utility (RF-Flasher_Launcher.exe) o loʻo aofia i le RF-Flasher utility software package i totonu o le faila talosaga. O le "Fa'asa'oloto faila" i le RF-Flasher aoga polokalama fa'apipi'i polokalame amata lisi
aitema (ST RF-Flasher utility xxx) fa'atagaina le avanoa sa'o i le faila talosaga.

Manaoga
Ina ia faʻaogaina le faʻaogaina o le RF-Flasher launcher i luga o se masini faʻapitoa, e tatau ona faʻamalieina mea nei:

  • UART mode: ole BlueNRG-1, BlueNRG-2, BlueNRG-LP, poʻo le BlueNRGLPS platform e tatau ona fesoʻotaʻi i se PC USB uafu
  • Faiga SWD: e tatau ona feso'ota'i le SWD hardware programming/debugging tool i le BlueNRG-1, BlueNRG-2, BlueNRG-LP, po'o le BlueNRG-LPS SWD laina.

Faatasi ai ma le filifiliga -l, o laasaga uma o galuega e siaki i totonu o le ogalaau files, teuina i totonu o le "Logs" folder, lea e faia i le RF-Flasher utility software package "Application" folder.

RF-Flasher fa'ala'au filifiliga aoga
Ina ia faʻaogaina le faʻaogaina o le RF-Flasher launcher i luga o se masini faʻapitoa, e tatau i le tagata faʻaoga ona tatala se atigi Windows DOS ma faʻalauiloa
RF-Flasher_Launcher.exe faʻatasi ai ma le faʻatonuga talafeagai, ma filifiliga (faʻaaoga -h e maua ai se lisi o filifiliga lagolago uma).
RF-Flasher_Launcher.exe -h:
Fa'aoga: RF-Flasher Launcher [-h] {flash, read, mass_erase, verify_memory, erase_pages, uart, swd, read_OTP,
tusi_OTP}
RF-Flasher fa'alauiloa lomiga xxx
Fa'aupuga e filifili ai:
-h, -fesoasoani: faʻaali lenei feʻau fesoasoani ma alu ese Poloaiga:
{flash, faitau, mass_delete, verify_memory, erase_pages, uart, swd, read_OTP, write_OTP}

  • moli: polokalame se manatuaga moli
  • faitau: faitau se manatuaga moli
  • mass_erase: tape se manatuaga moli
  • verify_memory: faʻamaonia mea o loʻo i totonu o se masini RF ma se file
  • erase_pages: tape se tasi pe sili atu itulau mai se manatuaga
  • uart: fa'aali uma uafu COM feso'ota'i (tulaga UART)
  • swd: fa'aali masini uma e feso'ota'i e ala ile SWD interface: ST-LINK, CMSIS-DAP, J-Link (SWD mode)
  • read_OTP: faitau vaega OTP (na'o le SWD mode)
  • write_OTP: tusi vaega OTP (na'o le SWD mode)

RF-Flasher fa'aoga aoga: UART & SWD auala
O le RF-Flasher launcher utility e lagolagoina ni faiga fa'aoga se lua:

  • UART mode (faʻafesoʻotaʻi le masini filifilia i se PC USB port)
  • Faiga SWD (fa'afeso'ota'i le BlueNRG-1, BlueNRG-2, BlueNRG-LP, po'o le BlueNRG-LPS masini SWD laina ua filifilia i se SWD programming/debugging tool).

RF-Flasher launcher utility: faʻaaoga le uart command e maua ai se lisi o avanoa uma COMx ports (masini e fesoʻotaʻi i PC USB ports):

RF-Flasher_Launcher.exe uart
UA FESOASOANI = COM194 (ST DK), COM160 (ST DK)
RF-Flasher launcher utility: faʻaaoga le swd command e maua ai se lisi o mea uma e fesoʻotaʻi ma fesoʻotaʻiga a le SWD meafaigaluega polokalame / debugging meafaigaluega:
RF-Flasher_Launcher.exe swd
SO'O'I E ST-LINK = LEAI ST-LINK SO'O'I
SO'O'I E CMSIS-DAP (numera fa'asologa o feso'ota'iga CMSIS-DAP):

  1. 07200001066fff333231545043084259a5a5a5a597969908
  2. 07200001066dff383930545043205830a5a5a5a597969908
  3. 07200001066dff333231545043084255a5a5a5a597969908 SO'O'I E J-Link = LEAI J-Link SO'O.

RF-Flasher fa'aoga aoga: fa'atonuga moli
Mo le faʻaogaina o le faʻaogaina o le RF-Flasher launcher e faʻapipiʻi ai se masini faʻapitoa e manatua ai le flash, o loʻo avanoa le faʻatonuga (i matou le -h filifiliga e maua ai se lisi o filifiliga uma e lagolagoina):
RF-Flasher_Launcher.exe moli -h

Fa'aoga fa'atonuga moli
RF-Flasher_Launcher.exe emo [-h] [-tuatusi START_ADDRESS][-f FILE_TO_FLASH
[FILE_TO_FLASH, …]] [-tapēina] [-faʻamaonia] [-rp] [-mac] [-mac_address MAC_ADDRESS][-mac_log_file MAC_LOG_FILE][-mac_start MAC_START_ADDRESS | -mac_file
MAC_FILE_ADDRESS](-uma | -d DEVICE_ID) [-verbose {0, 1, 2, 3, 4}] [-l](-UART |
-SWD) [-teletele {5,15,25,50,100,125,240,480,900,1800,4000}]

Fa'atonuga flash finauga e filifili ai

  • -tuatusi START_ADDRESS, --tuatusi START_ADDRESS: tuatusi amata.
  • -uma, -uma: masini fesoʻotaʻi uma (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma le J-link ID ile SWD mode).
  • -d DEVICE_ID, –device DEVICE_ID: seti le ID o le meafaigaluega meafaigaluega mo le fesoʻotaʻiga (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma J-Link ID ile SWD mode).
  • -tapē, –-tapē: mafai le [Mass Erase] filifiliga.
  • -f FILE_TO_FLASH [FILE_TO_FLASH …], –fileToFlash FILE_TO_FLASH
    [FILE_TO_FLASH …]: lisi o .bin po'o .hex files e fa'apolokalame le masini RF: se masini BlueNRG-1, BlueNRG-2, BlueNRG-LP, po'o le BlueNRG-LPS.
  • alaea {5,15,25,50,100,125,240,480,900,1800,4000}, –auau {5,15,25,50,100,125,240,480,900,1800,4000}: seti SWD tulaga tau meafaigaluega (na'o le tau STLINK). Ole tau fa'aletonu ole 4000.
  • -h, -fesoasoani: fa'aali le fe'au fesoasoani lea ma alu i fafo.
  • -l, –log: fa'amaumauga fa'amaumauga.
  • -mac, –mac: fa'aaga le filifiliga [Mac Address].
  • -mac_address –MAC_ADDRESS: o le nofoaga e manatua ai le moli e teu ai le tuatusi lautele Bluetooth®.
  • -mac_file MAC_FILE_ADDRESS, –mf MAC_FILE_TUSI: file o lo'o i ai se lisi o tuatusi MAC.
  • -mac_log_file MAC_LOG_FILE, –ml MAC_LOG_FILE: files o loʻo i ai ogalaau o teu / le teuina ma faʻaoga / le faʻaaogaina tuatusi MAC.
  • -mac_start MAC_START_ADDRESS, –ms MAC_START_ADDRESS: tuatusi MAC muamua.
  • -rp, –-readout_protection: fa'atagaina le filifiliga [ReadOut Protection].
  • -SWD, –-swd: SWD auala (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: faiga UART. E tatau ona tuʻuina se laupapa faʻapitoa i le faʻaogaina o le bootloader (maualuga le aofaʻi o le DIO7 aʻo faia se faʻasologa o le BlueNRG-1 poʻo le BlueNRG-2 masini; PA10 pine maualuga aʻo toe setiina se masini BlueNRG-LP poʻo BlueNRG-LPS) aʻo leʻi faia le taotoga .
  • -verbose {0, 1, 2, 3, 4}, –verbose {0, 1, 2, 3, 4}: fa'ateleina le fa'aupuga; seti le debug tulaga e oo atu i le 4 (na'o le SWD auala ma faamaumauga o faamaumauga). Ole tau fa'aletonu ole 2.
  • -faʻamaonia, -faʻamaonia: faʻatagaina le [Verify] filifiliga.

Fa'aaliga:

  • Afai e filifilia le UART mode, e tatau ona fesoʻotaʻi le masini i se PC USB COM port ma e tatau ona faʻaoga le filifiliga -UART. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i PC USB ports, o le -all option e mafai ai ona filifilia uma. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia taʻitasi COM port e faʻaaoga ai le filifiliga -d.
  • Afai e filifilia le SWD mode, e tatau ona faʻafesoʻotaʻi se SWD hardware programming / debugging tool i laina SWD masini filifilia, ma e tatau ona faʻaoga le filifiliga -SWD. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i le PC e ala i le SWD interface, o le -all option e mafai ai ona filifilia uma i latou. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia faʻaoga taʻitasi e faʻaaoga ai le filifiliga -d.
  • Le binary file e utaina o lo'o fa'amaonia e fa'aaoga ai le filifiliga -f. Afai e manaʻo le tagata faʻaoga e faʻapipiʻi le BlueNRG-1, BlueNRG-2, BlueNRG-LP, poʻo le BlueNRG-LPS masini faʻatasi ai ma isi mea faʻalua. files i le taimi o le polokalame polokalame e tasi, e mafai ona latou faʻamaonia ata faʻapitoa taʻitasi e mulimuli i lenei faʻatonuga: BlueNRG-1, BlueNRG-2, BlueNRG-LP, BlueNRG-LPS.
    RF-Flasher_Launcher.exe moli -UART -uma
    – f “C:\{user_path}\BlueNRG-1_2 DK
    3.2.2\Firmware\BlueNRG1_Periph_Examples\Micro\Hello_World\BlueNRG-1\Micro_Hell o_World.bin”
    – f “C:\{user_path}\BlueNRG-1_2 DK
    3.2.2\Firmware\BlueNRG1_Periph_Examples\Micro\Hello_World\BlueNRG-2\Micro_Hell o_World.bin” –l
    – f “C:{user_path}\BlueNRG-LP DK 1.4.0\Firmware
    \ Peripheral_Examples\Examples_MIX\MICRO\MICRO_Talofa_World\STEVAL-
    IDB011V1\Micro_Hello_World.bin”
    – f “C:{user_path}\BlueNRG-LP DK 1.4.0\Firmware
    \ Peripheral_Examples\Examples_MIX\MICRO\MICRO_Talofa_World\STEVAL-
    IDB012V1\Micro_Hello_World.bin”
    Le muamua file o lo'o fa'apolokalameina i masini feso'ota'i BlueNRG-1; lona lua file o lo'o fa'apolokalameina i masini feso'ota'i BlueNRG-2; lona tolu file o lo'o fa'apolokalameina i masini feso'ota'i BlueNRG-LP; lona fa file o lo'o fa'apolokalameina i masini feso'ota'i BlueNRG-LPS.
  • Afai e le faʻaaogaina le filifiliga -f, o ata binary files faʻamaonia i le Application/config_file.conf o loʻo faʻaaogaina:
    #Ata file mo BlueNRG_1 masini
    BLUENRG_1 = “user_path”/bluenrg_1_binary_file.hex
    #Ata file mo BlueNRG_2 masini
    BLUENRG_2 = “user_path”/bluenrg_2_binary.hex
    #Ata file mo le masini BlueNRG_LP
    BLUENRG_LP = “user_path”/bluenrg_lp_binary.hex
    #Ata file mo BlueNRG_LPS masini
    BLUENRG_LPS = “user_path”/bluenrg_lps_binary.hex
    E tatau i le tagata fa'aoga ona fa'amaonia le ala atoa ata fa'atusa mo masini ta'itasi.

RF-Flasher fa'aoga aoga: faitau le poloaiga
Mo le faʻaogaina o le faʻaogaina o le RF-Flasher launcher e faitau ai se masini faʻapipiʻi manatua, o loʻo maua le poloaiga faitau (faʻaaoga -h e maua ai se lisi o filifiliga uma e lagolagoina):
RF-Flasher_Launcher.exe faitau –h
Faitau le fa'aogaina o le fa'atonuga
RF-Flasher_Launcher.exe faitau [-h] [-tuatusi START_ADDRESS][-tele SIZE] [–atoa] [-s] (-uma | -d DEVICE_ID)(-UART | -SWD) [-verbose {0, 1 , 2, 3, 4}] [-l] [-teletele {5,15,25,50,100,125,240,480,900,1800,4000}]

Faitau le fa'atonuga e filifili ai finauga

  • -tuatusi START_ADDRESS, --tuatusi START_ADDRESS: tuatusi amata (o le tau fa'aletonu o le 0x10040000).
  • -uma, -uma: masini fesoʻotaʻi uma (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma le J-link ID ile SWD mode).
  • -d DEVICE_ID, –device DEVICE_ID: seti le ID o le meafaigaluega meafaigaluega mo le fesoʻotaʻiga (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma J-Link ID ile SWD mode).
  • -atoa, –atoa: faitau atoa le manatuaga flash.
  • -avesa {5,15,25,50,100,125,240,480,900,1800,4000}, –avesa
    {5,15,25,50,100,125,240,480,900,1800,4000}: seti le tau o taimi (na'o le SWD auala - ST-LINK hardware). Ole tau fa'aletonu ole 4000.
  • -h, -–fesoasoani: fa'aali le fe'au fesoasoani lea ma alu i fafo.
  • -l, –-log: fa'amaumauga fa'amaumauga.
  • -s, --show: faʻaali le manatuaga moli pe a maeʻa se gaioiga faitau.
  • -Size SIZE, –-size SIZE: tele o le flash memory e faitau (o le tau le aoga o le 0x3000).
  • -SWD, –-swd: SWD auala (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: UART faiga. O laupapa fa'apitoa e tatau ona tu'u i totonu o le bootloader mode a'o le'i faia lenei gaioiga. Mo masini BlueNRG-LP ma BlueNRG-LPS, e tatau i le tagata faʻaoga ona seti le PA10 pine i se tau maualuga ma faʻatino se toe faʻaleleia o le masini, tausia le PA10 i se tau maualuga. Mo masini BlueNRG-1 ma BlueNRG-2, e tatau i le tagata faʻaoga ona seti le DIO7 pine i se tau maualuga ma toe faʻaleleia le masini, tausia le DIO7 i se tau maualuga.
  • -verbose {0, 1, 2, 3, 4}, –verbose {0, 1, 2, 3, 4}: fa'ateleina le fa'aupuga; seti le debug tulaga e oo atu i le 4 (na'o le SWD auala ma faamaumauga o faamaumauga). Ole tau fa'aletonu ole 2.
  • Afai e filifilia le UART mode, e tatau ona fesoʻotaʻi le masini i se PC USB COM port ma e tatau ona faʻaoga le filifiliga -UART. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i PC USB ports, o le -all option e mafai ai ona filifilia uma. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia taʻitasi COM port e faʻaaoga ai le filifiliga -d.
  • Afai e filifilia le SWD mode, e tatau ona faʻafesoʻotaʻi se SWD hardware programming / debugging tool i laina SWD masini filifilia, ma e tatau ona faʻaoga le filifiliga -SWD. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i le PC e ala i le SWD interface, o le -all option e mafai ai ona filifilia uma i latou. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia faʻaoga taʻitasi e faʻaaoga ai le filifiliga -d.

RF-Flasher fa'aoga fa'aoga: fa'atonu solo tape
Ina ia fa'aogaina le fa'aogaina o le RF-Flasher launcher e fa'atino ai se solo tele o le manatuaga moli o se masini fa'apitoa, o le
mass_erase poloaiga o loʻo avanoa (faʻaaoga -h e maua ai se lisi o filifiliga lagolago uma):
RF-Flasher_Launcher.exe mass_erase –h
Mass tape le fa'aogaina o le fa'atonuga
RF-Flasher_Launcher.exe mass_tapese [-h] [-s] (-uma | -d DEVICE_ID)(-UART | -SWD) [-verbose {0, 1, 2, 3, 4}] [-l][- taimi
{5,15,25,50,100,125,240,480,900,1800,4000}]

Mass tapē poloa'iga finauga e filifili ai

  • -uma, -uma: masini fesoʻotaʻi uma (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma le J-link ID ile SWD mode).
  • -d DEVICE_ID, –device DEVICE_ID: seti le ID o le meafaigaluega meafaigaluega mo le fesoʻotaʻiga (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma J-Link ID ile SWD mode).
  • -avesa {5,15,25,50,100,125,240,480,900,1800,4000}, –avesa
    {5,15,25,50,100,125,240,480,900,1800,4000}: seti le tau o taimi (na'o le SWD auala - ST-LINK hardware). Ole tau fa'aletonu ole 4000.
  • -h, --fesoasoani: fa'aali le fe'au fesoasoani lea ma alu i fafo.
  • -l, –-log: fa'amaumauga fa'amaumauga.
  • -s, --faʻaalia: faʻaali le manatuaga moli pe a maeʻa se taotoga tele.
  • -SWD, –-swd: SWD auala (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: UART faiga. O laupapa fa'apitoa e tatau ona tu'u i totonu o le bootloader mode a'o le'i faia lenei gaioiga. Mo masini BlueNRG-LP ma BlueNRG-LPS, e tatau i le tagata faʻaoga ona seti le PA10 pine i se tau maualuga ma faʻatino se toe faʻaleleia o le masini, tausia le PA10 i se tau maualuga. Mo masini BlueNRG-1 ma BlueNRG-2, e tatau i le tagata faʻaoga ona seti le DIO7 pine i se tau maualuga ma toe faʻaleleia le masini, tausia le DIO7 i se tau maualuga.
  • -verbose {0, 1, 2, 3, 4}, –verbose {0, 1, 2, 3, 4}: fa'ateleina le fa'aupuga; seti le debug tulaga e oo atu i le 4 (na'o le SWD auala ma faamaumauga o faamaumauga). Ole tau fa'aletonu ole 2.

Manatua

  • Afai e filifilia le UART mode, e tatau ona fesoʻotaʻi le masini i se PC USB COM port ma e tatau ona faʻaoga le filifiliga -UART. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i PC USB ports, o le -all option e mafai ai ona filifilia uma. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia taʻitasi COM port e faʻaaoga ai le filifiliga -d.
  • Afai e filifilia le SWD mode, e tatau ona faʻafesoʻotaʻi se SWD hardware programming / debugging tool i laina SWD masini filifilia, ma e tatau ona faʻaoga le filifiliga -SWD. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i le PC e ala i le SWD interface, o le -all option e mafai ai ona filifilia uma i latou. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia faʻaoga taʻitasi e faʻaaoga ai le filifiliga -d.

RF-Flasher fa'aoga aoga: fa'amaonia le fa'atonuga manatua
Le faʻaogaina o le faʻaogaina o le RF-Flasher launcher e faʻamaonia ai mea e manatua ai le flash o se masini faʻapitoa, le
verify_memory poloaiga o loʻo avanoa (faʻaaoga -h e maua ai se lisi o filifiliga lagolago uma):
RF-Flasher_Launcher.exe verify_memory –h

Fa'amaonia le fa'aogaina o le fa'atonuga manatua
RF-Flasher_Launcher.exe verify_memory [-h] -f FLASH_VERIFY_FILE[-s][-tuatusi START_ADDRESS](-uma | -d DEVICE_ID) [-verbose {0, 1, 2, 3, 4}][-l] (-UART |-SWD)[-auave {5,15,25,50,100,125,240,480,900,1800,4000]XNUMX

Fa'amaonia le fa'atonuga o le manatua o finauga e filifili ai

  • -tuatusi START_ADDRESS, --tuatusi START_ADDRESS: tuatusi amata mo le fa'amaoniga (mo .bin filena'o). Ole tau fa'aletonu ole 0x10040000.
  • -uma, -uma: masini fesoʻotaʻi uma (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma le J-link ID ile SWD mode).
  • -d DEVICE_ID, –device DEVICE_ID: seti le ID o le meafaigaluega meafaigaluega mo le fesoʻotaʻiga (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma J-Link ID ile SWD mode).
  • -f FLASH_VERIFY_FILE,--file FLASH_VERIFY_FILE: file e fa'aaoga e fa'amaonia ai le flash memory
  • -telefoni {5,15,25,50,100,125,240,480,900,1800,4000}, –auau {5,15,25,50,100,125,240,480,900,1800,4000}: seti tulaga tau STLINK (taua masani STLINK). Ole tau fa'aletonu ole 4000.
  • -h, -–fesoasoani: fa'aali le fe'au fesoasoani lea ma alu i fafo
  • -l, -–log: fa'amaumauga o fa'amaumauga.
  • -s, --show: faʻaali le manatuaga moli pe a maeʻa se gaioiga faʻamaonia
  • -SWD, –-swd: SWD mode (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: faiga UART.
  • -verbose {0, 1, 2, 3, 4}, –verbose {0, 1, 2, 3, 4}: fa'ateleina le fa'aupuga; seti le debug tulaga e oo atu i le 4 (na'o le SWD auala ma faamaumauga o faamaumauga). Ole tau fa'aletonu ole 2.
  • Afai e filifilia le UART mode, e tatau ona fesoʻotaʻi le masini i se PC USB COM port ma e tatau ona faʻaoga le filifiliga -UART. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i PC USB ports, o le -all option e mafai ai ona filifilia uma. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia taʻitasi COM port e faʻaaoga ai le filifiliga -d.
  • Afai e filifilia le SWD mode, e tatau ona faʻafesoʻotaʻi se SWD hardware programming / debugging tool i laina SWD masini filifilia, ma e tatau ona faʻaoga le filifiliga -SWD. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i le PC e ala i le SWD interface, o le -all option e mafai ai ona filifilia uma i latou. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia faʻaoga taʻitasi e faʻaaoga ai le filifiliga -d.

RF-Flasher fa'aoga aoga: tape itulau poloaiga
Le fa'aogaina o le RF-Flasher launcher utility e tape ai se itulau e manatua ai flash mai se masini patino, le
E maua le fa'atonuga erase_pages (fa'aoga -h e maua ai se lisi o filifiliga uma e lagolagoina):
RF-Flasher_Launcher.exe erase_pages –h
Aveese itulau fa'atonuga fa'aoga
RF-Flasher_Launcher.exe erase_pages [-h](-UART |-SWD)(-uma | -d DEVICE_ID) [-l] [-verbose {0, 1, 2, 3, 4}] [-teletele {5,15,25,50,100,125,240,480,900,1800,4000, XNUMX}] [-s] (-p ITULAU | -vaega VAEGA VAEGA)

Aveese itulau e fa'atonu ai finauga e filifili ai

  • -uma, -uma: masini fesoʻotaʻi uma (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma le J-link ID ile SWD mode).
  • -d DEVICE_ID, –device DEVICE_ID: seti le ID o le meafaigaluega meafaigaluega mo le fesoʻotaʻiga (COM port i le UART mode; ST-LINK ID, CMSIS-DAP ID, ma J-Link ID ile SWD mode).
  • -h, --fesoasoani: fa'aali le fe'au fesoasoani lea ma alu i fafo.
  • -l, –-log: fa'amaumauga fa'amaumauga.
  • -avesa {5,15,25,50,100,125,240,480,900,1800,4000}, –avesa
    {5,15,25,50,100,125,240,480,900,1800,4000}: seti le tau o taimi (na'o le SWD auala - ST-LINK hardware). Ole tau fa'aletonu ole 4000.
  • -p ITULAU, –itulau ITULAU: lisi o itulau e tape (amata ile 0).
  • -range RANGE RANGE, –range RANGE RANGE: tele o itulau e tape (lea o le RANGE muamua o loʻo faʻaalia ai le numera laʻititi o itulau ma le RANGE lona lua e faʻaalia ai le numera maualuga o itulau).
  • -s, --show: faʻaali le manatuaga moli pe a maeʻa se gaioiga faʻamaonia.
  • -SWD, –-swd: SWD auala (ST-LINK, CMSIS-DAP, J-Link hardware programming/debugging tool).
  • -UART, –-uart: UART faiga. O laupapa fa'apitoa e tatau ona tu'u i totonu o le bootloader mode a'o le'i faia lenei gaioiga. Mo masini BlueNRG-LP ma BlueNRG-LPS, e tatau i le tagata faʻaoga ona seti le PA10 pine i se tau maualuga ma faʻatino se toe faʻaleleia o le masini, tausia le PA10 i se tau maualuga. Mo masini BlueNRG-1 ma BlueNRG-2, e tatau i le tagata faʻaoga ona seti le DIO7 pine i se tau maualuga ma toe faʻaleleia le masini, tausia le DIO7 i se tau maualuga.
  • -verbose {0, 1, 2, 3, 4}, –verbose {0, 1, 2, 3, 4}: fa'ateleina le fa'aupuga; seti le debug tulaga e oo atu i le 4 (na'o le SWD auala ma faamaumauga o faamaumauga). Ole tau fa'aletonu ole 2.
  • Afai e filifilia le UART mode, e tatau ona fesoʻotaʻi le masini i se PC USB COM port ma e tatau ona faʻaoga le filifiliga -UART. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i PC USB ports, o le -all option e mafai ai ona filifilia uma. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia taʻitasi COM port e faʻaaoga ai le filifiliga -d.
  • Afai e filifilia le SWD mode, e tatau ona faʻafesoʻotaʻi se SWD hardware programming / debugging tool i laina SWD masini filifilia, ma e tatau ona faʻaoga le filifiliga -SWD. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i le PC e ala i le SWD interface, o le -all option e mafai ai ona filifilia uma i latou. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia faʻaoga taʻitasi e faʻaaoga ai le filifiliga -d.

RF-Flasher fa'aoga aoga: faitau le OTP poloaiga
Mo le faʻaogaina o le faʻaogaina o le RF-Flasher launcher e faitau ai le OTP o se masini faʻapitoa, o loʻo avanoa le read_OTP poloaiga (faʻaaoga -h e maua ai se lisi o filifiliga uma e lagolagoina):
RF-Flasher_Launcher.exe faitau_OTP –h
Faitau le fa'aoga o le OTP
RF-Flasher_Launcher.exe read_OTP [-h] (uma | -d DEVICE_ID) [-tuatusi OTP_ADDRESS][-num NUM] [-auave {5,15,25,50,100,125,240,480,900,1800,4000] [-] s] [-verbose {0,1,2,3,4}]

Faitau le OTP fa'atonuga finauga e filifili ai

  • -tuatusi OTP_ADDRESS, –tuatusi OTP_ADDRESS: tuatusi o le vaega o le OTP (tua: 0x10001800
    – fa'aoga upu).
  • -uma, –uma: masini feso'ota'i uma (ST-LINK ID, CMSIS-DAP ID, ma le J-link ID ile SWD mode).
  • -d DEVICE_ID, –device DEVICE_ID: seti le ID o le meafaigaluega meafaigaluega o loʻo faʻaaogaina mo le fesoʻotaʻiga (ST-LINK ID, CMSIS-DAP ID, ma le J-Link ID ile SWD mode).
  • -telefoni {5,15,25,50,100,125,240,480,900,1800,4000}, –auau {5,15,25,50,100,125,240,480,900,1800,4000}: seti tulaga tau STLINK (taua masani STLINK). Ole tau fa'aletonu ole 4000.
  • -h, --fesoasoani: fa'aali le fe'au fesoasoani lea ma alu i fafo.
  • -l, –-log: fa'amaumauga fa'amaumauga.
  • -num NUM, –numera NUM: numera o upu e faitau i totonu ole vaega ole OTP. Ole tau fa'aletonu ole 256.
  • -s, --faʻaali: faʻaali le vaega OTP.
  • -verbose {0, 1, 2, 3, 4}, –verbose {0, 1, 2, 3, 4}: fa'ateleina le fa'aupuga; seti le debug tulaga e oo atu i le 4 (na'o le SWD auala ma faamaumauga o faamaumauga). Ole tau fa'aletonu ole 2.

Fa'aaliga:
Na'o le fa'atonuga o le read_OTP e galue ile faiga SWD. O le mea lea, e tatau ona feso'ota'i se SWD hardware programming/debugging tool i laina SWD masini filifilia. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i le PC e ala i le SWD interface, o le -all option e mafai ai ona filifilia uma. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia faʻaoga taʻitasi e faʻaaoga ai le filifiliga -d.

RF-Flasher fa'aoga aoga: tusi le OTP poloaiga
Mo le faʻaogaina o le faʻaogaina o le RF-Flasher launcher e faitau ai le OTP o se masini faʻapitoa, o loʻo avanoa le write_OTP poloaiga (faʻaaoga -h e maua ai se lisi o filifiliga uma e lagolagoina):
RF-Flasher_Launcher.exe write_OTP –h

Tusi le fa'aoga o le OTP
RF-Flasher_Launcher.exe write_OTP [-h] (uma | -d DEVICE_ID) -tuatusi OTP_ADDRESS
-taua OTP_VALUE [-vaavaaia {5,15,25,50,100,125,240,480,900,1800,4000}] [-l] [-verbose {0,1,2,3,4}]

Tusi le OTP poloaiga e filifili ai finauga

  • -tuatusi OTP_ADDRESS, -tuatusi OTP_ADDRESS: tuatusi o le vaega o le OTP (tuatau: 0x10001800 – fa'aoga upu).
  • -uma, –uma: masini feso'ota'i uma (ST-LINK ID, CMSIS-DAP ID, ma le J-link ID ile SWD mode).
  • -d DEVICE_ID, –device DEVICE_ID: seti le ID o le meafaigaluega meafaigaluega o loʻo faʻaaogaina mo le fesoʻotaʻiga (ST-LINK ID, CMSIS-DAP ID, ma le J-Link ID ile SWD mode).
  • -telefoni {5,15,25,50,100,125,240,480,900,1800,4000}, –auau {5,15,25,50,100,125,240,480,900,1800,4000}: seti tulaga tau STLINK (taua masani STLINK). Ole tau fa'aletonu ole 4000.
  • -h, --fesoasoani: fa'aali le fe'au fesoasoani lea ma alu i fafo.
  • -l, –-log: fa'amaumauga fa'amaumauga.
  • -s, --show: faʻaali le manatuaga moli pe a maeʻa se gaioiga faʻamaonia.
  • -value OTP_VALUE, –value OTP_VALUE: OTP tau (se upu, pei ole 0x11223344)
  • -verbose {0, 1, 2, 3, 4}, –verbose {0, 1, 2, 3, 4}: fa'ateleina le fa'aupuga; seti le debug tulaga e oo atu i le 4 (na'o le SWD auala ma faamaumauga o faamaumauga). Ole tau fa'aletonu ole 2.

Fa'aaliga:
O le write_OTP poloaiga e galue i le SWD mode. O le mea lea, e tatau ona feso'ota'i se SWD hardware programming/debugging tool i laina SWD masini filifilia. Afai e sili atu ma le tasi le masini e fesoʻotaʻi i le PC e ala i le SWD interface, o le -all option e mafai ai ona filifilia uma i latou. I le isi itu, e mafai e le tagata faʻaoga ona faʻamaonia faʻaoga taʻitasi e faʻaaoga ai le filifiliga -d.
RF-Flasher fa'aaogā fa'alatalata: fa'ataamples
Polokalama se ata fa'alua i luga ole masini BlueNRG-1 ma BlueNRG-2 feso'ota'i ma se meafaigaluega meafaigaluega ST-LINK (i le SWD mode):
RF-Flasher_Launcher.exe moli -SWD -all -f “User_Application.hex” –l
Polokalama se ata fa'alua i masini feso'ota'i Bluetooth® Low Energy e ala ile USB COM ports (i le UART mode):
RF-Flasher_Launcher.exe moli -UART –all -f “User_Application.hex” –l
Polokalama se ata binary i luga o masini fesoʻotaʻi e ala i le CMSIS-DAP auala e faʻaaoga ai le tape, faʻamaonia, ma faʻamaumauga faʻamaumauga (i le SWD mode):

STMicroelectronics-UM2406-Le-RF-Flasher-Utility-Software-Package- (18)

Toe iloilo tala'aga

Laulau 3. Tala'aga o le toe iloiloga o pepa

Aso Fa'aliliuga Suiga
15-Me-2018 1 Fa'asalalauga muamua.
 

  

 

03-Iul-2018

  

 

  

2

 Fa'afou Ata 1. BlueNRG-1, BlueNRG-2 Utility Utility, Ata 2. Fa'aoga Fa'aoga UART fa'amalama autu, Ata 3. Fa'aoga UART mode: ata file , Ata 4. Faiga UART faʻaoga faʻapipiʻi: manatuaga masini , Ata 5. Faiga UART faʻaoga faʻapipiʻi: suiga o fanua manatua, Ata 7. Faʻaoga Faʻamatalaga: SWD faʻamalama autu, Ata 8. Faʻaoga Faʻamatalaga SWD mode: manatua masini , Ata 10.

Fa'aoga Uila: SWD fa'aogaina otometi, Ata 11. Fa'aoga fa'apipi'i: UART fa'aogaina otometi, Ata 12. Fa'aoga fa'amalama: UART polokalama fa'apipi'i ua mae'a ma Ata 13. Fa'aoga Fa'aaliga: SWD MAC filifiliga filifiliga.

O suiga laiti o tusitusiga i totonu o le pepa.
 26-Feb-2019  3 Fa'afou le Vaega Folasaga ma le Vaega 3.1 UART mode: fa'afefea ona tamo'e.
Faʻaopoopo le Vaega 8 Flasher launcher aoga ma ona vaega uma.
 

09-Aper-2019

  

4

 Faʻaopoopo faʻamatalaga i le "Talosaga faila" i le Vaega 8: RF-Flasher faʻaoga faʻaoga.

Fa'afou Vaega 8.4: RF-Flasher fa'aoga aoga: fa'atonuga moli.
 

 

 

 

 

14-Iul-2020

  

  

5

 Suia le BlueNRG-1 ma le BlueNRG-2 ile BlueNRG-X Flasher software package

Fa'aopoopo fa'amatalaga ile masini BlueNRG-LP.

Fa'afou Ata 1. Fa'aoga RF-Flasher, Ata 3. Fa'amalama fa'amalama UART fa'amalama autu, Ata 5. Fa'aoga UART fa'aoga fa'apipi'i: Fa'amatalaga Fa'amatalaga Meafaigaluega, Ata 6. Fa'aoga UART fa'apipi'i: suia nofoaga manatua,

Ata 9. Fa'aoga moli: SWD faʻamalama autu, Ata 10. Faʻaoga faʻapipiʻi SWD mode: Faʻamaumauga o Mea Faʻapipiʻi, Ata 14. Faʻaoga faʻapipiʻi: SWD Plug&Play mode, Ata 15. Faʻaoga moli: Filifiliga tuatusi MAC ma le Ata 18. RF-Flasher launcher: fa'atonuga fa'amalama fa'atasi ai ma le – tape, -l, -fa'amaonia le filifiliga
 

 

 

 

05-Tes-2020

  6 Faʻafouina Vaega Folasaga, Vaega 2.1: Manaʻoga faʻaoga, Vaega 4.1: UART mode: faʻafefea ona tamoʻe, Vaega 5: SWD main window, Vaega 5.1: SWD mode: auala e tamoe ai, Vaega 8.1: Manaoga,

Vaega 8.2: RF-Flasher fa'aaoga filifiliga, Vaega 8.3: RF-Flasher fa'aoga fa'aoga: UART & SWD modes, Vaega 8.4: RF-Flasher fa'aoga fa'aoga: faʻatonuga moli, Vaega 8.5: RF-Flasher faʻamalo aoga: faitau poloaiga, Vaega 8.6 : RF-Flasher fa'aoga aoga: fa'atonuga tape'a,

Vaega 8.7: RF-Flasher fa'aoga aoga: fa'amaonia le fa'atonuga manatua.

Fa'aopoopo le Vaega 8.8: RF-Flasher fa'aoga aoga: tape itulau poloaiga.
 

 

 

 

 

 

04-Oke-2021

  

 

 

 

 

 

7

 Faaopoopo Vaega 5.2: SWD mode: faitau vaega bootloader ma Vaega 5.3: SWD mode: faitau vaega OTP.

Fa'afou le ulutala, Fa'atomuaga Vaega, Vaega 2: Amataina, Vaega 2.1: Mana'oga fa'akomepiuta, Vaega 2.2: Fa'atulagaina o pusa polokalama,

Vaega 3: Fa'aoga meafaigaluega, Vaega 4: UART fa'amalama autu, Vaega 8: RF- Flasher fa'aoga fa'aoga, Vaega 8.1: Mana'oga, Vaega 8.2: RF-Flasher fa'aogaina filifiliga fa'aoga, Vaega 8.3: RF-Flasher fa'aoga fa'aoga: UART & SWD modes , Vaega 8.4: RF-Flasher fa'aoga aoga: fa'atonuga moli,

Vaega 8.5: RF-Flasher fa'aoga aoga: faitau le poloaiga, Vaega 8.6: RF- Flasher fa'aoga fa'aoga: tele tape poloaiga, Vaega 8.7: RF-Flasher fa'aoga fa'aoga: fa'amaonia le fa'atonuga manatua, Vaega 8.8: RF-Flasher fa'amalo aoga: tape itulau poloaiga , Vaega 1.1: Lisi o acronyms ma le Vaega 1.2: Fa'asinomaga pepa.
Aso Fa'aliliuga Suiga
Fa'afou Ata 1. RF-Flasher aoga, Ata 2. Fa'atusatusa Lua Files tab,

Ata 3. UART fa'amalama fa'amalama fa'amalama, Ata 4. UART fa'aoga fa'amalama: Ata File fa'amaufa'ailoga, Ata 5. Fa'aoga UART fa'aoga fa'amalama: Fa'amaumauga o Mea Fa'atonu, Ata 6. Faiga UART fa'aoga fa'amalama: suia nofoaga manatua,

Ata 7. Faiga UART fa'aoga fa'amalama: Fa'atusatusa le Manatu o Mea ma Ata File tab, Ata 9. Faʻaoga faʻapipiʻi: SWD faʻamalama autu, Ata 10. Faʻaoga faʻapipiʻi SWD mode: Faʻamatalaga Faʻamatalaga Meafaigaluega, Ata 16. Faʻaoga faʻapipiʻi: UART MAC polokalame faʻapipiʻi, Ata 17. Faʻamatalaga faʻapipiʻi: SWD MAC polokalame faʻapipiʻi ma Ata 18. RF-Flasher launcher: faʻatonuga moli ma - tape, -l, -faʻamaonia filifiliga.
 

06-Aper-2022

  

8

 Fa'aopoopo le fa'amatalaga BlueNRG-LPS i totonu o le pepa.

Fa'afou Vaega 8.3: RF-Flasher fa'aoga aoga: UART & SWD modes ma Vaega 8.4: RF-Flasher fa'aoga fa'aoga: fa'atonuga moli.
 

 

 

 

 

 

 

 

 

 

 

 

 

10-Iul-2024

  

 

 

 

 

 

 

 

 

 

 

 

 

9

 Fa'afouina:
  • Igoa o pepa
  • Vaega Folasaga
  • Vaega 1.1: Lisi o acronyms
  • Vaega 1.2: Pepa fa'asinomaga
  • Ata 1. RF-Flasher aoga
  • Vaega 3: Fa'aoga meafaigaluega
  • Ata 3. Fa'amalama fa'amalama autu UART fa'aoga Flasher
  • Vaega 4.1: UART mode: fa'afefea ona tamoe
  • Vaega 5: SWD faamalama autu
  • Vaega 5.1: SWD mode: fa'afefea ona tamoe
  • Fa'ata 12. Fa'aaogā fa'amalama SWD fa'aoga: faitau le fa'apipi'i
  • Vaega 5.3: SWD mode: faitau vaega OTP
  • Ata 14. Fa'aaogā fa'amuila: SWD Plug&Play mode
  • Vaega 7: polokalame tuatusi MAC
  • Vaega 8.1: Manaoga
  • Vaega 8.2: RF-Flasher fa'ala'ala filifiliga aoga
  • Vaega 8.3: RF-Flasher fa'aoga fa'aoga: UART & SWD auala
  • Vaega 8.4: RF-Flasher fa'aoga aoga: fa'atonuga moli
  • Vaega 8.5: RF-Flasher fa'aoga aoga: faitau le fa'atonuga
  • Vaega 8.6: RF-Flasher fa'aoga aoga: fa'atonu solo tape
  • Vaega 8.7: RF-Flasher fa'aoga aoga: fa'amaonia le fa'atonuga manatua
  • Vaega 8.8: RF-Flasher fa'aoga aoga: tape itulau poloaiga
  • Vaega 8.9: RF-Flasher fa'aoga aoga: faitau le OTP poloaiga
  • Vaega 8.10: RF-Flasher fa'alatalata aoga: tusi le poloaiga OTP

FA'AALIGA TAUA – FAITAU MA LE FA'AMANATU
STMicroelectronics NV ma ona lala ("ST") fa'aagaga le aia e fai ai suiga, fa'asa'oga, fa'aleleia, fa'aleleia, ma fa'aleleia atili i oloa ST ma/po'o lenei pepa i so'o se taimi e aunoa ma se fa'aaliga. E tatau i tagata fa'atau ona maua fa'amatalaga talafeagai lata mai i oloa ST a'o le'i tu'uina atu oka. O oloa ST o lo'o fa'atau atu e tusa ai ma tu'utu'uga ma aiaiga a le ST o lo'o fa'atau atu i le taimi e fa'ailoa ai le oka.
E na'o le au fa'atau le filifiliga, filifiliga, ma le fa'aogaina o oloa ST ma e leai se noataga a le ST mo fesoasoani talosaga po'o le mamanu o oloa a tagata fa'atau.
Leai se laisene, fa'aalia pe fa'aalia, i so'o se aia tatau tau le atamai ua fa'atagaina e ST i totonu.
Toe fa'atauina atu oloa ST ma aiaiga e ese mai fa'amatalaga o lo'o fa'ailoa mai i inei e tatau ona fa'aleaogaina ai so'o se fa'ataga na tu'uina atu e ST mo ia oloa.
ST ma le logo ST o fa'ailoga fa'ailoga a ST. Mo fa'amatalaga fa'aopoopo e uiga i fa'ailoga tau ST, va'ai ile www.st.com/trademarks. O isi igoa uma o oloa po'o auaunaga o le meatotino a latou lava tagata.
O fa'amatalaga i totonu o lenei pepa e suitulaga ma suia fa'amatalaga na tu'uina atu muamua i so'o se lomiga muamua o lenei pepa.
© 2024 STMicroelectronics – Ua taofia aia tatau uma
UM2406 – Faaaliga 9

Pepa / Punaoa

STMicroelectronics UM2406 Le RF-Flasher Utility Software Package [pdf] Tusi Taiala
UM2406, UM2406 O le RF-Flasher Utility Software Package, O le RF-Flasher Utility Software Package, RF-Flasher Utility Software Package, Utility Software Package, Software Package, Package

Fa'asinomaga

Fa'amatalaga Fa'atatau

Tuu se faamatalaga

E le fa'asalalauina lau tuatusi imeli. Fa'ailogaina fanua mana'omia *