formlabs Grey Resini V5 Ti aipe Iwontunws.funfun Of Yara Print Speed
ọja Alaye
Idi gbogbogbo Resini – Grey Resini V5
Resini Grey ti o ni iwọntunwọnsi ti aipe fun awọn ohun elo wapọ.
Grey Resini V5 nfunni ni iwọntunwọnsi ti iyara titẹ iyara, iṣedede giga, irisi imurasilẹ, awọn ohun-ini ẹrọ ti o lagbara, ati irọrun, ṣiṣan iṣẹ igbẹkẹle. Ṣẹda lile ati awọn ẹya ti o lagbara pẹlu ipari dada ti awọn abanidije mimu abẹrẹ. Iṣagbekalẹ ohun elo n mu ilolupo Fọọmu 4 fun titẹjade yiyara.
Ohun elo Properties
| Ohun ini | Metiriki | Imperial | Ọna |
|---|---|---|---|
| Gbẹhin Fifẹ Agbara | 62 MPa | 8992psi | ASTM D638-14 |
| Modulu fifẹ | 2675 MPa | 388 ksi | ASTM D638-14 |
Gbona Properties
- Ooru Deflection otutu @ 1.8 MPa: ASTM D648-16
- Ooru Deflection otutu @ 0.45 MPa: ASTM D648-16
Ibamu Yiyọ
Ere iwuwo ogorun ju wakati 24 lọ fun titẹjade ati mimu-iwosan 1 x 1 x 1 cm cube ti a baptisi sinu awọn olomi-kọọkan:
- Acid acid 5%: 0.9%
- Acetone: 4.9%
Awọn ilana Lilo ọja
Awọn itọnisọna titẹ sita
Rii daju pe itẹwe ti ni iwọntunwọnsi ati pe ojò resini ti mọ ki o to bẹrẹ titẹ. Lo awọn eto atẹjade ti a ṣeduro fun awọn abajade to dara julọ.
Ifiranṣẹ-Iṣẹ
Lẹhin titẹ sita, ṣe iwosan apakan ni ibamu si awọn akoko ti a sọ ati awọn ipo fun awọn ohun-ini ẹrọ ti o dara julọ.
IDI RESIN GBOGBO
Resini Grey ti o ni iwọntunwọnsi ti aipe fun awọn ohun elo wapọ
Grey Resini V5 jẹ ohun iyasọtọ ti o wapọ Idi gbogbogbo Resini, nfunni iwọntunwọnsi aipe ti iyara titẹ iyara, deede giga, irisi imurasilẹ-ifihan, awọn ohun-ini ẹrọ ti o lagbara, ati irọrun, ṣiṣan iṣẹ igbẹkẹle.
Ṣẹda awọn ẹya ti o ni lile ati ti o lagbara pẹlu ipari dada ti awọn abanidije mimu abẹrẹ. Grey Resini V5 ni ọlọrọ, awọ matte ti o gba awọn ẹya ti o dara ni deede.
Grey Resini V5 jẹ igbekalẹ ohun elo tuntun ti o lo ilolupo Fọọmu 4 lati tẹjade ni igba mẹta yiyara ju ẹya iṣaaju lọ.
Fọọmù ati ki o fit prototyping
Awọn awoṣe ti o ti ṣetan-ifihan pẹlu awọn ẹya ti o dara ati awọn alaye intricate
Awọn awoṣe ehín gbogbogbo
Jigs ati amuse
Ṣetan 20/03/2024
Ìṣí. 01 20/03/2024
Ti o dara julọ ti imọ wa alaye ti o wa ninu rẹ jẹ deede. Bibẹẹkọ, Formlabs, Inc. ṣe atilẹyin ọja kankan, ti a fihan tabi mimọ, nipa deede awọn abajade wọnyi lati gba lati lilo rẹ.
PATAKI
| Ohun elo Awọn ohun-ini | METRIC 1 | IMPERIAL 1 | Ọ̀nà | ||||
|
Alawọ ewe |
Firanṣẹ-ni arowoto fun awọn iṣẹju 5 ni ibaramu
otutu 2 |
Leyin-ni arowoto fun 15 min
ni 60 °C 3 |
Alawọ ewe |
Firanṣẹ-ni arowoto fun awọn iṣẹju 5 ni ibaramu
otutu 2 |
Leyin-ni arowoto fun 15 min
ni 140 °F 3 |
||
| Awọn ohun-ini fifẹ | METRIC 1 | IMPERIAL 1 | Ọ̀nà | ||||
| Gbẹhin Fifẹ Agbara |
46 MPa |
54 MPa |
62 MPa |
6672psi |
7832psi |
8992psi |
ASTM D638-14 |
| Modulu fifẹ | 2200 MPa | 2500 MPa | 2675 MPa | 319 ksi | 363 ksi | 388 ksi | ASTM D638-14 |
| Elongation ni Bireki | 22% | 15% | 13% | 22% | 15% | 13% | ASTM D638-14 |
| Flexural Properties | METRIC 1 | IMPERIAL 1 | Ọ̀nà | ||||
| Agbara Flexural | 82 MPa | 91 MPa | 103 MPa | 11893psi | 13198psi | 14938psi | ASTM D790-15 |
| Modulu Flexural | 2000 MPa | 2450 MPa | 2750 MPa | 290 ksi | 355 ksi | 399 ksi | ASTM D790-15 |
| Awọn ohun-ini Ipa | METRIC 1 | IMPERIAL 1 | Ọ̀nà | ||||
|
Ogbontarigi Izod |
36 J/m |
34 J/m |
32 J/m |
0.673
ft-lb/in |
0.636
ft-lb/in |
0.598
ft-lb/in |
ASTM D4812-11 |
| Gbona Properties | METRIC 1 | IMPERIAL 1 | Ọ̀nà | ||||
| Ooru Deflection Temp. @ 1.8 MPa |
54 °C |
54 °C |
59 °C |
129 °F |
129 °F |
138 °F |
ASTM D648-16 |
| Ooru Deflection Temp. @ 0.45 MPa |
62 °C |
62 °C |
71 °C |
144 °F |
144 °F |
160 °F |
ASTM D648-16 |
Ibaramu ojutu
Ere iwuwo ni ogorun ju wakati 24 lọ fun titẹjade ati ti a mu-iwosan 1 x 1 x 1 cm cube ti a baptisi sinu olomi-ara kọọkan:
| Yiyan | Ere iwuwo wakati 24,% | Yiyan | Ere iwuwo wakati 24,% |
| Acetic Acid 5% | 0.9 | Epo erupẹ (Eru) | 0.2 |
| Acetone | 4.9 | Epo erupẹ (Imọlẹ) | 0.2 |
| Bìlísì ~ 5% NaOCl | 0.7 | Omi iyọ (3.5% NaCl) | 0.8 |
| Butyl acetate | 0.3 | Skydrol 5 | 0.5 |
| epo Diesel | 0.1 | Ojutu iṣuu soda Hydroxide (0.025% PH 10) |
0.8 |
| Diethyl glycol Monomethyl Eteri | 1.0 | Acid to lagbara (HCl conc) | 0.5 |
|
Epo Epo eefun |
0.2 |
Tripropylene glycol monomethyl ether |
0.3 |
| Hydrogen peroxide (3%) | 0.9 | Omi | 0.8 |
| Isooctane (aka petirolu) | < 0.1 | Xylene | < 0.1 |
| isopropyl Ọtí | 0.3 |
- Awọn ohun-ini ohun elo le yatọ si da lori geometry apakan, iṣalaye titẹjade, awọn eto titẹ, iwọn otutu, ati ipakokoro tabi awọn ọna sterilization ti a lo.
- A gba data lati awọn apakan ti a tẹjade lori itẹwe Fọọmu 4 pẹlu awọn eto 100 μm Grey Resin V5, ti a fo ni Fọọmu Fọọmu fun awọn iṣẹju 5 ni ≥99% Isopropyl Alcohol, ati lẹhin-iwosan ni iwọn otutu yara fun awọn iṣẹju 5 ni Itọju Fọọmu kan.
- A gba data lati awọn apakan ti a tẹjade lori itẹwe Fọọmu 4 pẹlu awọn eto 100 μm Grey Resin V5, ti a fo ni Fọọmu Fọọmu fun awọn iṣẹju 5 ni ≥99% Isopropyl Alcohol, ati lẹhin-iwosan ni 60 ° C fun awọn iṣẹju 15 ni Itọju Fọọmu kan.
Awọn ibeere Nigbagbogbo
Q: Njẹ Grey Resini V5 le ṣee lo fun awọn awoṣe ehín?
A: Bẹẹni, Grey Resini V5 dara fun ṣiṣẹda awọn awoṣe ehín gbogbogbo.
Q: Bawo ni MO ṣe le nu awọn ẹya ti a tẹjade mọ?
A: Mọ awọn ẹya ti a tẹjade nipa lilo ọti isopropyl tabi awọn aṣoju mimọ ibaramu miiran ti a ṣeduro nipasẹ olupese.
Awọn iwe aṣẹ / Awọn orisun
 |
formlabs Grey Resini V5 Ti aipe Iwontunws.funfun Of Yara Print Speed [pdf] Itọsọna olumulo V5 FLGPGR05, Grẹy Resini V5 Iwontunws.funfun Ti o dara julọ Ti Iyara Titẹjade Yara, Resini Grẹy V5, Iwontunws.funfun Ti o dara julọ Ti Iyara Titẹjade Yara, Iyara Titẹjade Yara, Iyara Titẹjade |
