formlabs Grey Resin V5 Paleni Sili O le Saosaoa Lomi Lomi
Fa'amatalaga o oloa
Resin Fuafuaga Lautele – Resin Grey V5
Ose Resin Grey sili ona paleni mo fa'aoga eseese.
Grey Resin V5 e ofoina atu le paleni o le saoasaoa lolomi vave, maualuga saʻo, faʻaaliga-sauni foliga, malosi faʻainisinia, ma se galuega faigofie, faatuatuaina. Fausia ni vaega malo ma malolosi ma se fa'ai'uga e fa'atusa i le fa'ameamea o tui. O le fa'atulagaina o meafaitino e fa'aogaina ai le Form 4 ecosystem mo le lomitusi vave.
Meatotino Meatotino
| Meatotino | metric | Imperial | Metotia |
|---|---|---|---|
| Malosi'i Sili | 62 MPa | 8992 psi | ASTM D638-14 |
| Tensile Modulus | 2675 MPa | 388 ksi | ASTM D638-14 |
Meatotino vevela
- Vevela Su'ega vevela @ 1.8 MPa: ASTM D648-16
- Vevela Su'ega vevela @ 0.45 MPa: ASTM D648-16
Fesoasoani Solvent
Fa'atupu pasene o le mamafa i luga ole 24 itula mo se kupita 1 x 1 x 1 cm ua uma ona lolomi ma fa'amuta ua fa'atofuina i so'o so'o:
- Acetic Acid 5%: 0.9%
- Acetone: 4.9%
Fa'atonuga o le Fa'aaogaina o Mea
Taiala Lomitusi
Ia mautinoa ua fa'avasega le lomitusi ma ua mama le tane resin a'o le'i amataina le lolomi. Fa'aoga tulaga lolomi fautuaina mo iuga sili ona lelei.
Fa'atonuga
A maeʻa le lolomiina, faʻapipiʻi le vaega e tusa ai ma taimi ma aiaiga mo mea sili ona lelei faʻainisinia.
RESIN FAAMOEMOEGA AO
Ose Resin Grey sili ona paleni mo fa'aoga eseese
Grey Resin V5 o se Resin Fa'atosina sili ona lelei, ofoina atu se paleni sili ona lelei o le saoasaoa lolomi vave, maualuga le sa'o, fa'aaliga-sauni foliga, malosi fa'ainisinia, ma se fa'agaioiga faigofie, fa'atuatuaina.
Fausia ni vaega e malo ma malolosi ma se fa'ai'uga i luga e fa'atusa i le fa'ameamea o tui. Grey Resin V5 o lo'o i ai se lanu mauoa, matte e pu'eina sa'o foliga lelei.
Grey Resin V5 ose mea fou fa'apipi'i e fa'aogaina ai le Form 4 ecosystem e lolomi faatolu vave nai lo le lomiga muamua.
Fua ma fetaui fa'ata'ita'iga
Faʻataʻitaʻiga saunia faʻataʻitaʻiga ma foliga lelei ma faʻamatalaga lavelave
Fa'ata'ita'iga nifo lautele
Jigs ma mea fa'apipi'i
Sauniuni 20/03/2024
Faaa 01 20/03/2024
E tusa ai ma lo matou iloa o faʻamatalaga o loʻo i totonu e saʻo. Ae ui i lea, e le faia e Formlabs, Inc. se faʻamaoniga, faʻaalia pe faʻaalia, e uiga i le saʻo o nei taunuuga e maua mai le faʻaaogaina.
FAAMATALAGA
| Mea Meatotino | Metotia 1 | IMPERIAL 1 | METOGA | ||||
|
Lanu meamata |
Fa'amuta mo le 5 min i le si'osi'omaga
vevela 2 |
Fa'amālōlōina mo 15 min
i le 60 °C 3 |
Lanu meamata |
Fa'amuta mo le 5 min i le si'osi'omaga
vevela 2 |
Fa'amālōlōina mo 15 min
i le 140 °F 3 |
||
| Meatotino Tensile | Metotia 1 | IMPERIAL 1 | METOGA | ||||
| Malosi'i Sili |
46 MPa |
54 MPa |
62 MPa |
6672 psi |
7832 psi |
8992 psi |
ASTM D638-14 |
| Tensile Modulus | 2200 MPa | 2500 MPa | 2675 MPa | 319 ksi | 363 ksi | 388 ksi | ASTM D638-14 |
| Elongation i le malologa | 22% | 15% | 13% | 22% | 15% | 13% | ASTM D638-14 |
| Meatotino Fesuiaiga | Metotia 1 | IMPERIAL 1 | METOGA | ||||
| Malosi Fa'asusu | 82 MPa | 91 MPa | 103 MPa | 11893 psi | 13198 psi | 14938 psi | ASTM D790-15 |
| Fa'asa'oga Fa'aola | 2000 MPa | 2450 MPa | 2750 MPa | 290 ksi | 355 ksi | 399 ksi | ASTM D790-15 |
| Meatotino Aafiaga | Metotia 1 | IMPERIAL 1 | METOGA | ||||
|
Notched Izod |
36 J/m |
34 J/m |
32 J/m |
0.673
ft-lb/in |
0.636
ft-lb/in |
0.598
ft-lb/in |
ASTM D4812-11 |
| Meatotino vevela | Metotia 1 | IMPERIAL 1 | METOGA | ||||
| Su'ega vevela Temp. @ 1.8 MPa |
54 °C |
54 °C |
59 °C |
129 °F |
129 °F |
138 °F |
ASTM D648-16 |
| Su'ega vevela Temp. @ 0.45 MPa |
62 °C |
62 °C |
71 °C |
144 °F |
144 °F |
160 °F |
ASTM D648-16 |
SOLVENT FEAGAIGA
Fa'atupu pasene o le mamafa i luga atu o le 24 itula mo se kupita 1 x 1 x 1 cm ua uma ona lolomi ma fa'amālōlōina i so'o so'o:
| Solvent | 24 itula fa'ateleina le mamafa,% | Solvent | 24 itula fa'ateleina le mamafa,% |
| Acetic Acid 5% | 0.9 | Suau'u minerale (Mamafa) | 0.2 |
| Acetone | 4.9 | Suau'u minerale (Malamalama) | 0.2 |
| Pisitusi ~5% NaOCl | 0.7 | Suavai Masima (3.5% NaCl) | 0.8 |
| Butyl Acetate | 0.3 | Skydrol 5 | 0.5 |
| Suau'u Diesel | 0.1 | Fofo ole Sodium Hydroxide (0.025% PH 10) |
0.8 |
| Diethyl glycol Monomethyl Eter | 1.0 | Acid Malosi (HCl conc) | 0.5 |
|
Suau'u Haidrau |
0.2 |
Tripropylene glycol monomethyl eter |
0.3 |
| Hydrogen peroxide (3%) | 0.9 | Vai | 0.8 |
| Isooctane (pesini) | <0.1 | Xylene | <0.1 |
| Isopropyl Alcohol | 0.3 |
- O meafaitino e mafai ona fesuisuiaʻi e faʻatatau i vaega geometry, faʻatonuga lolomi, tulaga lolomi, vevela, ma le faʻamaʻi poʻo le faʻamaʻiina o metotia faʻaaogaina.
- Na maua faʻamatalaga mai vaega na lolomi i luga o le Pepa 4 lomitusi ma le 100 μm Grey Resin V5 faʻapipiʻi, fufulu i se Fua Fua mo le 5 minute i le ≥99% Isopropyl Alcohol, ma faʻamuta i le vevela o le potu mo le 5 minute ile Fomu Faʻamalolo.
- Na maua faʻamaumauga mai vaega na lolomi i luga o le Pepa 4 lomitusi ma 100 μm Grey Resin V5 faʻapipiʻi, fufulu i totonu o le Fuga Fuga mo le 5 minute i le ≥99% Isopropyl Alcohol, ma faʻamuta i le 60 ° C mo le 15 minute i se Fomu Faʻamalolo.
Fesili e Fai soo
Q: E mafai ona fa'aoga Grey Resin V5 mo fa'ata'ita'iga nifo?
A: Ioe, Grey Resin V5 e talafeagai mo le fatuina o faʻataʻitaʻiga masani nifo.
Q: E tatau faapefea ona ou faamamaina vaega lolomi?
A: Fa'amama vaega lolomi e fa'aaoga ai le isopropyl alcohol po'o isi vaila'au fa'amama talafeagai e fautuaina e le gaosi oloa.
Pepa / Punaoa
 |
formlabs Grey Resin V5 Paleni Sili O le Saosaoa Lomi Lomi [pdf] Taiala mo Tagata Fa'aoga V5 FLGPGR05, Gray Resin V5 Paleni Sili o le Saosaoa Lomi Lomi, Gray Resin V5, Paleni Sili o le Saosaoa Lomi Lomi, Saosaoa Lomi Lomi, Saosaoa Lolomi |
