Awọn akoonu tọju
1 Echo SRM-225 U-mu Konbo Kit
2 Awọn akoonu
3 Fifi sori ẹrọ
4 fi sori ẹrọ irin shield
5 fi sori ẹrọ iyan abẹfẹlẹ
5.1 Dọgbadọgba ati Ṣatunṣe Unit
6 iwoyi ọja atilẹyin ọja
7 Echo SRM-225 U-mu Konbo Kit User Afowoyi
8 Awọn itọkasi
9 jẹmọ Posts

Echo-LOGO

Echo SRM-225 U-mu Konbo Kit

Echo-SRM-225-U-mu-Konbo-Kit-ọja

IKILO

O gbọdọ fi Barrier Bar tabi U-Handle Kit sori ẹrọ ati gbogbo awọn ẹya Iyipada Blade ti o han ni awọn ilana atẹle ṣaaju ṣiṣe ẹyọ yii pẹlu awọn abẹfẹlẹ, bibẹẹkọ ipalara nla le ja si.

PATAKI: Ti a ba lo awọn ori monofilament ti kii ṣe boṣewa, METAL/PLASTIC abe tabi awọn agbẹ ati bẹbẹ lọ, ATUNTẸ CARBUURETOR tabi ibajẹ ẹrọ pataki le ṣẹlẹ. Wo “Atunṣeto Carburetor” ninu Iwe Afọwọkọ oniṣẹ ẹrọ.

SRM/PAS/SB Itọsọna Eto-soke abẹfẹlẹ

 

LATI LO

ASEJE WONYI

 Pro Maxi-Ge Grass / igbo ṣiṣu cutters Kosemi Ṣiṣu Mẹta-Ge

Koriko / igbo Blade

 Irin

Tri-Ge / 8 Eyin Grass / igbo Blade

  

Irin 80T fẹlẹ Blade Irin 22T Clearing ri Blade
 

O gbọdọ fi awọn ẹya wọnyi sori ẹrọ!

  

Mu

 Loop Handle, w/tabi w/o Barrier Bar Imudani Loop pẹlu Pẹpẹ Idena,

tabi U-Imudani

 Imudani Loop pẹlu Pẹpẹ Idena,

tabi U-Imudani

  

U-Imudani
idoti Shield Irin Shield Irin Shield Irin Shield Irin Shield
Ijanu Ijanu ejika Ijanu ejika Ijanu ejika Ijanu ejika****
 

Blade iṣagbesori Hardware

 Oke Awo & Alapin ifoso Oke Awo & Glide Cup Oke/Isalẹ Awo Abẹfẹ** Oke/Isalẹ Awo Abẹfẹ**
Hex Nut Hex Nut Hex Nut Hex Nut
Pin Cotter Tuntun *** Pin Cotter Tuntun *** Pin Cotter Tuntun *** Pin Cotter Tuntun ***

 IKILO

  • MAA ṢE ṢE ṢE ṢE ṢE ORI GT (IKÚN ORI) Àwòṣe TRIMMERS
  • Iwọn ila opin Arbor ti Oke Blade Plate gbọdọ baramu iwọn ila opin arbor ti awọn abẹfẹlẹ irin.
  • PIN titun cotter nilo ni akoko kọọkan ti fi sori ẹrọ abẹfẹlẹ.
  • Awọn olutọpa ju 16.5 lbs (7.5 kg) iwuwo gbigbẹ (iwuwo w/o idana) nilo ijanu ejika meji

Awọn akoonu

Echo-SRM-225-U-mu-Konbo-Kit-FIG-1

  • 1, U-mu ijọ
  • 1, Bọkẹti mimu u-isalẹ (awọn idaji meji)
  • 1, Harness Clamp w/oruka
  • 1, 5 x 12 mm boluti
  • 1, 8 x 55 mm boluti
  • 1, Apoti iyipo
  • 1, Square eso
  • 2, Fifun USB awọn agekuru
  • 3, 5 x 25 mm boluti
  • 1, ibadi paadi
  • 1, Ijanu ejika
  • 1, Oke Awo, 20 mm
  • 1, Awo isalẹ
  • 1, Irin shield
  • 1, akọmọ
  • 3, 5 x 10 mm skru (oke apata)
  • 2, 5 x 8 mm skru (akọmọ si asà)
  • 4 mm eso
  • 4, 5 mm lockwashers
  • 1, M10 x 1.25 LH Eso
  • 10, Pipin Pinni
  • 1, 10 mm kola
  • 2, 5 x 35 mm skru

Fifi sori ẹrọ

Awọn irinṣẹ ti a beere: 8mm x 10mm Ṣii Ipari Wrench, T-wrench, Torx T-27 L-Wrench

Echo-SRM-225-U-mu-Konbo-Kit-FIG-2

  1. Pa choke kuro ki o yọ àlẹmọ afẹfẹ kuro ati ideri.
  2. Ge asopọ awọn itọsọna iduro iginisonu (A) ati (B).
  3. Yọ nut nut (C) kuro ki o yọ isopopona kuro lati inu akọmọ carburetor (D).
  4. Yọ okun fifẹ inu (E) lati carburetor swivel (F).Echo-SRM-225-U-mu-Konbo-Kit-FIG-3
  5. Tu awọn meji (2) wakọ ọpa clamp boluti (G) ni engine wakọ ọpa clamp.
  6. Fa wiwakọ ọpa ijọ lati idimu idi.Echo-SRM-225-U-mu-Konbo-Kit-FIG-4
  7. Loose meji (2) ru skru mu (H) ki o si fa ru mu lati awọn drive ọpa ijọ.
  8. Ṣii awọn skru mẹrin (4) (I) ki o yọ ọwọ iwaju kuro.Echo-SRM-225-U-mu-Konbo-Kit-FIG-5
  9. Fi square nut (J) ni isalẹ mu biraketi (K) ati ibi akọmọ lori drive ọpa 400 mm (15 3/4 in.) lati engine opin ti wakọ ọpa.
  10. Ni aabo pẹlu kekere mu akọmọ clamp (L) ati mẹta (3) 5 x 25 mm boluti.Echo-SRM-225-U-mu-Konbo-Kit-FIG-6
  11. Ijanu ipo clamp (M) 220 mm (8-5 / 8 ni.) Lati engine opin ti drive ọpa ijọ. Fi 5 x 12 mm boluti sori ẹrọ, ṣugbọn MAA ṢE Mu ni akoko yii.
  12. Ni ifarabalẹ ni ibamu apejọ ọpa awakọ si ẹrọ ti o rii daju pe ọpa awakọ inu n ṣiṣẹ sinu iho idimu.Echo-SRM-225-U-mu-Konbo-Kit-FIG-7
  13. Mu meji (2) wakọ ọpa clamp boluti (G) ni aabo.
  14. Fi sori ẹrọ U-Handle oke ati akọmọ lori akọmọ isalẹ ki o ni aabo pẹlu ọkan (1) 8 x 55 mm boluti (N) ati ifoso ipin nla.
  15. Isomọ ipa ọna ati apejọ asiwaju iginisonu lẹhin U-Handle akọmọ ati agekuru lati wakọ ọpa bi o ṣe han.Echo-SRM-225-U-mu-Konbo-Kit-FIG-8
  16. Gbe akojọpọ finasi USB (E) ni o tobi iho ti carburetor swivel (F).
  17. Loosen nut (C) ati gbe opin asapo ti ọna asopọ finasi ni Iho akọmọ. Ika Mu eso (C).
  18. Ṣayẹwo finasi fun ominira gbigbe ati pe fifẹ ṣiṣi nla / awọn iwọn aiṣiṣẹ kekere ni a ṣatunṣe daradara. Ti atunṣe ko ba le ṣe aṣeyọri pẹlu awọn eso ti n ṣatunṣe (C, O), kan si alagbawo pẹlu Oluṣowo Echo rẹ fun ilana atunṣe to pe. Din eso (C).
  19. So awọn itọsọna iduro ikanni 2 (A,B) lati inu ọpọn okun fifẹ si awọn itọsọna ina 2 (A, B) lori ẹrọ.Echo-SRM-225-U-mu-Konbo-Kit-FIG-9
  20. Awọn itọsọna ina to ni aabo lodi si ile engine pẹlu awọn agekuru (P, Q).
  21. Fi air àlẹmọ ati ideri

Fi Hip Pad sori ẹrọ (Aṣayan)

Echo-SRM-225-U-mu-Konbo-Kit-FIG-10

  1. So ibadi paadi si ijanu bi o ṣe han.

fi sori ẹrọ irin shield

Awọn irinṣẹ ti a beere

  • 8 x 10 mm Ṣiṣii-ipari Wrench, Torx T-27 L-Wrench, T-wrench, Ohun elo Titiipa

Awọn ẹya ti a beere: Apata Irin, Akọmọ Aabo,

  • 3 - 5 x 10 mm skru (irin shield to ile jia).
  • 2 – 5 x 8 mm skru, 2 – 5 mm eso, 2 – 5 mm titiipa-foso, (akọmọ to shield).
  • 2 – 5 x 35 mm skru, 2 – 5 mm eso, 2 – 5 mm lockwashers (biraketi si ile jia)
  1. Ti o ba fi sori ẹrọ yọ ori laini ọra kuro, awo ti n ṣatunṣe oke, awo apata, ati apata ṣiṣu.Echo-SRM-225-U-mu-Konbo-Kit-FIG-11
    1. Ṣe deede iho titiipa ni awo oke pẹlu ogbontarigi ni eti ile jia ati fi ohun elo titiipa ori (A).
    2. Yọ ori laini kuro (B) nipa titan ni ọna aago titi ti ori yoo fi kuro patapata.
    3. Yọ ohun elo titiipa kuro.
    4. Yọ mẹta skru dani shield awo (D) ati ṣiṣu shield (C) to jia ile.
    5. Idaduro ori laini (B), awo atunṣe oke (E), awo apata, ati apata ṣiṣu (C) fun iyipada pada si iṣẹ ori laini ọra.Echo-SRM-225-U-mu-Konbo-Kit-FIG-12
  2. Sopọ mọ akọmọ (F) si aabo (G) ati so apata si isalẹ ti ile jia (H) pẹlu ohun elo ti a pese.
  3. Yọ gearcase clamping skru (I) ati loosely so akọmọ (F) to gearcase (H) pẹlu 2 – 5x35mm skru, eso ati lockwashers pese ni kit.
  4. Mu gbogbo shield hardware.

fi sori ẹrọ iyan abẹfẹlẹ

Awọn irinṣẹ ti a beere

  • Titiipa Ọpa, T-Wrench.

Awọn ẹya ti a beere: Oke Awo w/ 20 mm awaoko, Isalẹ Plate, 10 mm Nut, 2 x 25 mm Pipin Pin, Blade.

Echo-SRM-225-U-mu-Konbo-Kit-FIG-13

  1. Fi sori ẹrọ kola ọpa (A) lẹhinna awo atunṣe oke (B) sori ọpa PTO.
  2. Fi Blade (C) sori awaoko awo oke. Awọn abẹfẹlẹ gbọdọ wa ni fi sori ẹrọ ki itọka iyipo lori oju abẹfẹlẹ dojukọ apoti jia. Secure abẹfẹlẹ pẹlu Isalẹ ojoro awo (D), ati 10 mm nut (E). Yipada nut nut ni ọna aago si ọna PTO lati mu.
  3. So iho pọ si ni awo oke pẹlu ogbontarigi ni ile jia, ati fi ohun elo titiipa sii (F) lati ṣe idiwọ ọpa splin lati yiyi. Ọfà lori awọn aaye ile jia si ogbontarigi. Mu 10 mm nut ni aabo.
  4. Fi pin pin (G) sinu iho ni ọpa PTO, ki o si tẹ awọn ẹsẹ pin ni ayika ọpa ni ọna aago lati ṣe idaduro nut 10 mm.
    • PATAKI: Maṣe tun lo pin pin - fi pin pin titun sii ni igbakugba ti a ba fi abẹfẹlẹ sori ẹrọ tabi rọpo.
  5. Yọ ohun elo titiipa kuro.
Dọgbadọgba ati Ṣatunṣe Unit
  1. Tu ijanu clamp dabaru.
  2. Fi lori ijanu ati ki o so ẹyọkan si ijanu.
  3. Ifaworanhan ijanu clamp (H) soke tabi isalẹ titi awọn iwọntunwọnsi ẹyọkan pẹlu ori isunmọ 50-75 mm (2 -3 in.) lati ilẹ.Echo-SRM-225-U-mu-Konbo-Kit-FIG-14
  4. Mu ijanu clamp dabaru.
  5. Loose oke U-Handle clamp skru (I), ati ipo U-Handle fun itunu isẹ.
  6. Mu U-Imudani clamp skru ati 8 mm clamp boluti labeabo.

Echo-SRM-225-U-mu-Konbo-Kit-FIG-15

AKIYESI: Ni ọran ti Pajawiri, gige gige / brushcutter le jẹ idasilẹ lati inu ijanu nipa gbigbe soke lori kola itusilẹ iyara.

iwoyi ọja atilẹyin ọja

Ti o ba nilo iranlowo tabi ni awọn ibeere nipa ohun elo, isẹ tabi itọju ọja yi o le pe Ẹka Atilẹyin Ọja Olumulo ECHO ni 1-800-673-1558 lati 8:30 emi to 4:30 pm (Central Standard Time) Monday nipasẹ Friday. Ṣaaju pipe, jọwọ mọ awoṣe ati nọmba ni tẹlentẹle ti ẹyọ rẹ lati ṣe iranlọwọ fun Aṣoju Atilẹyin Ọja Olumulo rẹ.

ECHO, NIPA

Echo SRM-225 U-mu Konbo Kit User Afowoyi

View Fullscreen

Awọn itọkasi

jẹmọ Posts

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *