cell2 SDP212H Eto Siren Amplifier System pẹlu 15 Button Amusowo Adarí User Afowoyi
cell2 SDP212H Eto Siren Amplifier System pẹlu 15 Bọtini amusowo Adarí

IKILO

  1. Fifi sori ẹrọ daradara ti ọja nbeere olutẹtisi lati ni oye ti o dara ti ẹrọ itanna, awọn ọna ṣiṣe ati awọn ilana. O ṣe pataki lati fi ẹrọ naa sori ẹrọ daradara lati rii daju iṣẹ ailewu ati igbẹkẹle.
  2. Jọwọ ka nipasẹ gbogbo awọn ilana daradara ati farabalẹ ṣaaju fifi sori ẹrọ naa.
  3. Ikuna lati tẹle awọn ilana wọnyi le ja si ibajẹ nla si ẹyọ tabi ọkọ ati o le sọ awọn atilẹyin ọja di ofo.
  4. Iṣagbesori ti o tọ ati onirin jẹ bọtini si imunadoko ti SDP212H.
  5. Awọn olupilẹṣẹ gbọdọ ka ati tẹle awọn itọnisọna ati awọn ikilọ ninu iwe afọwọyi lati ọdọ olupese atilẹba.
  6. Oṣiṣẹ yẹ ki o rii daju pe ẹrọ siren ti wa ni ṣinṣin si ọkọ ni aabo ati pe o n ṣiṣẹ daradara. Ikuna lati tẹle gbogbo awọn iṣọra ailewu ati awọn itọnisọna le fa ibajẹ ohun-ini, ipalara, tabi iku.
  7. Rii daju pe eyikeyi nronu iṣakoso iyipada wa ni agbegbe ti o fun laaye mejeeji ọkọ ati nronu iṣakoso lati ṣiṣẹ lailewu ni eyikeyi ipo awakọ.

IKILO

Awọn aami
Ohun ewu - Ipele ohun lati ọdọ agbọrọsọ siren (109dB ni 2M) le fa ibajẹ igbọran. Maṣe ṣiṣẹ siren laisi aabo igbọran pipe fun iwọ ati ẹnikẹni ti o wa ni agbegbe lẹsẹkẹsẹ .n (Ref. OSHA 1910.95 fun awọn itọnisọna ifihan ariwo iṣẹ)

Awọn akoonu tọju
1 Àkóónú
2 AWỌN NIPA
3 WIRING
4 PC ETO
5 Fifi sori ẹrọ
6 Awọn iwe aṣẹ / Awọn orisun
6.1 Awọn itọkasi
7 jẹmọ Posts

Àkóónú

  1. Siren amplifier x 1 pc
    Àkóónú
  2. 4-PIN agbara ijanu x 1 pc
  3. 4-PIN ga lọwọlọwọ igbejade ijanu x 1 pc
  4. 4-PIN agbọrọsọ ijanu x 1 pc
  5. 8-PIN awọn igbewọle ijanu x 1 pc
  6. 10-PIN aarin/kekere lọwọlọwọ awọn iyọrisi ijanu x 1 pc
    Àkóónú
  7. Awọn skru irin dì x 4 awọn kọnputa (ø4 x 16mm)
    Àkóónú
  8. Adarí x 1 pc
    Àkóónú
  9. Agekuru oludari x 1 pc
    Àkóónú
  10. Awọn skru irin dì x 2 awọn kọnputa (ø4 x 16mm)
    Àkóónú
  11. Decal x 1 ṣeto
  12. Afowoyi x 1 pc
    Àkóónú

Awọn ẹya ẹrọ

  1. Okun itẹsiwaju x 1 pc (4m)
  2. Olukọni RJ45
    Àkóónú

AWỌN NIPA

  • Iṣagbewọle Voltage: 12 ~ 24VDC
  • Agbara Ijade Siren: 200W (100W x2)
  • Iṣagbejade Siren: 100W-ACR 11Ω
  • Igbohunsafẹfẹ Siren: 759Hz - 1592Hz (le yatọ nipasẹ eto PC)
  • O pọju. Lọwọlọwọ (Siren nikan): 20A @ 12VDC / 10A @ 24VDC (w/o awọn abajade iṣakoso ina) Imurasilẹ Lọwọlọwọ: 0 mA (w/o waya IGN) / <0.35 A (w/ waya IGN)
  • Iwọn iwọn otutu ti nṣiṣẹ: -30�~65�
  • Ijade Awọn iṣakoso ina: 15A x3, 10A x3, 2A x2, 0.25A x4 Iwọn Fiusi:
  • Blade Fuse: 30A x1, 15A x3, 10A x3, 2A x2
  • Fiusi Tunto: 0.25A x4
  • Awọn iwọn (ampolutọpa): 190mm x 217mm x 45.6mm
  • Awọn iwọn (oluṣakoso): 66.4mm x 134mm x 26.9mm

WIRING

  • Aworan atọka:
    Aworan atọka:

4-PIN AGBARA ijanu (Asopọ J2)

  • Agbara +VDC & -GND (J2-PIN1~PIN3 & J2-PIN4)
  1. So awọn onirin RED mẹta si ebute batiri rere (+). Fi okun waya kọọkan ni ominira @ 30 Amps (olumulo-ipese). MAA ṢE fi awọn fiusi wọnyi sori ẹrọ titi ti ẹrọ onirin fun gbogbo eto ti pari.
  2. So okun waya BLACK pọ si ilẹ chassis ọkọ (eyiti o wa nitosi batiri).
  3. Pulọọgi Asopọ sinu siren amplifier kuro.

4-PIN Agbọrọsọ ijanu (Asopọ J8)

  • Agbọrọsọ 1 Jade (J8-PIN1~PIN2)
    So awọn onirin GRAY (SPK1-) ati BLUE (SPK1+) pọ si ọkan 100W 11-ohm impedance agbọrọsọ.
  • Agbọrọsọ 2 Jade (J8-PIN3~PIN4)
    So awọn WHITE (SPK2+) ati RED (SPK2-) awọn onirin si ọkan 100W 11 ohm impedance agbọrọsọ.

AKIYESI: Ma ṣe gbiyanju lati sopọ awọn agbohunsoke meji ni afiwe tabi jara lori eyikeyi bata ti Agbọrọsọ.

8-PIN INPUTS ijanu (Asopọ J5)

  • Iṣagbewọle ina (J5-PIN5)
    Eyi ṣiṣẹ bi iyipada agbara fun gbogbo ẹyọkan. So okun waya RED yii pọ si iyika rere ti iṣakoso nipasẹ iyipada ina ọkọ lati gba siren laaye amplifier lati wa ni titan & pa pọ. Eto naa ko ṣiṣẹ laisi Iṣiṣẹ Iṣilọ yii. MAA ṢE so okun waya taara si batiri nitori eyi le fa batiri kuro.
  • Awọn igbewọle Iṣalaye Ilana (J5-PIN1~PIN4)
    Awọn igbewọle mẹrin wọnyi le ṣe eto lati mu Bọtini miiran ṣiṣẹ, Input, Ijade, Siren ati/tabi bẹbẹ lọ nipasẹ iyipada rere tabi odi. Nipa aiyipada, wọn ṣiṣẹ bi Horn-Ring, Park Kill ati awọn igbewọle ohun orin Meji:
    • Iṣagbewọle Iwo-Oruka (J5-PIN1)
      So yi input to awọn ọkọ iwo oruka Circuit; lo + VDC nigbagbogbo si okun waya GREEN fun Ohun orin Horn Air. Ohun orin yii yoo fopin si gbogbo Awọn ohun orin Siren miiran ati Redio Rebroadcast fun igba diẹ lakoko ti o ti muu ṣiṣẹ. Ti ipo Ọfẹ Ọwọ ba n ṣiṣẹ, lo + VDC fun igba diẹ lati bẹrẹ Siren, tẹ lẹẹkansi lati yi ohun orin pada ki o tẹ lẹẹmeji lati pari Siren. Iṣagbewọle yii tun mu OUTPUT7 ṣiṣẹ lakoko ti o nṣiṣẹ.
    • Iṣagbewọle Pa Park (J5-PIN2)
      So yi input to awọn ọkọ Park Shift Circuit; lo + VDC lemọlemọ si okun PURPLE fun odi igba diẹ ti gbogbo awọn ohun orin Siren miiran ati Redio Rebroadcast lakoko ti o ti muu ṣiṣẹ. Ni kete ti o ti tu silẹ, gbogbo ohun orin siren ati Rebroadcast yoo bẹrẹ pada (ti o ba wulo).
    • Iṣagbewọle Onirohin 3 (J5-PIN3)
      Waye + VDC nigbagbogbo si okun waya YELLOW lati mu OUTPUT12 ṣiṣẹ.
    • Iṣagbewọle ohun orin meji (J5-PIN4)
      Waye + VDC nigbagbogbo si okun waya GRAY lati mu ohun orin alapọpo ṣiṣẹ fun ipadasilẹ Olona-Speakers lakoko ti ohun orin Siren kan n ṣiṣẹ.
  • Iṣagbewọle Analogue Eto (J5-PIN6)
    Iṣagbewọle afọwọṣe yii le ṣe eto lati mu Bọtini miiran ṣiṣẹ, Input, Ijade, Siren ati/tabi bẹbẹ lọ ti o da lori oriṣiriṣi igbewọle vol.tage (lati 1VDC si 32VDC). Nipa aiyipada, iṣẹ titẹ sii bi agbara backlight ON titẹ sii:
    • Imọlẹ ẹhin LORI Iṣawọle (J5-PIN6)
      Waye + VDC nigbagbogbo si waya bulu lati mu ina ẹhin ṣiṣẹ lori oluṣakoso amusowo.
  • Iṣagbewọle Redio Tun-igbohunsafẹfẹ (J5-PIN7~PIN8)
    So WHITE ati awọn okun BROWN pọ si iṣelọpọ agbọrọsọ ti console redio kan

4-PIN Ijanu Ijanu isọdọtun giga lọwọlọwọ (Asopọ J6)

  • OUTPUT1~3 (J6-PIN1~PIN3) Sopọ si awọn ẹrọ iranlọwọ agbara to 15 Amps o pọju.
  • NA (J6-PIN4) Ko Lo.

10-PIN agbedemeji/kekere lọwọlọwọ Ijanu Ijanu (Asopọ J7)

  • OUTPUT4~5 (J7-PIN1~PIN2)
    Sopọ si awọn ẹrọ iranlọwọ agbara to 10 Amps o pọju.
  • OUTPUT6 (J7-PIN3) & OUTPUT6 Olubasọrọ Gbẹ (J7-PIN4)
    OUTPUT6 le ṣiṣẹ ni ọkan ninu awọn oju iṣẹlẹ meji ni isalẹ da lori Ipo Fuse rẹ:
    • Ipo FUSE 1 - Ijade Idi Gbogbogbo (Iyipada Factory)  So J7-PIN3 pọ si agbara awọn ẹrọ iranlọwọ to 10 Amps o pọju.
    • Ipo FUSE 2 - Yiyi Olubasọrọ Gbẹ
      So J7-PIN3 (RED) ati J7-PIN4 (ORANGE) kọọkan si ẹrọ kan nibiti awọn ẹrọ meji yoo ti sopọ nigbati OUTPUT6 ti mu ṣiṣẹ.
      LOSIYI
  • OUTPUT7~8 (J7-PIN6~PIN7)
    Sopọ si awọn ẹrọ iranlọwọ agbara to 2 Amps max. tabi lo bi Iyipada imuṣiṣẹ iṣẹ Lightbar.
  • OUTPUT9~12 (J7-PIN8~PIN10, PIN5)
    Sopọ si awọn ẹrọ iranlọwọ agbara to 0.25 Amps max. tabi lo bi Iyipada imuṣiṣẹ iṣẹ Lightbar.

WIRING o wu aipe
Ayafi bibẹẹkọ tun ṣe eto nipasẹ sọfitiwia PC. Nipa aiyipada, awọn onirin Ijade wọnyi ṣiṣẹ bi Tẹle

  • CODE1~CODE3 Output (J6-PIN1~PIN3)
    So ọkọọkan awọn ọnajade mẹta pọ si awọn ẹrọ agbara ti yoo tan-an ati PA pẹlu awọn bọtini CODE1, CODE2 ati CODE3 lẹsẹsẹ.
  • SW12~SW14 Output (J7-PIN1~PIN3)
    So ọkọọkan awọn ọnajade mẹta pọ si awọn ẹrọ agbara ti yoo tan-an ati PA pẹlu SW12, SW13 ati SW14 bọtini lẹsẹsẹ.
  • Iṣagbewọle Logic 3 Ijade (J7-PIN5)
    So iṣelọpọ yii pọ si awọn ẹrọ agbara ti yoo tan ati PA pẹlu Input Logic 3.
  • Iṣẹjade Ikilọ oruka iwo (J7-PIN6)
    So iṣelọpọ yii pọ si awọn ẹrọ agbara ti yoo wa ni TAN ati PA pẹlu titẹ sii Gbigbe Iwo-Oruka tabi Bọtini Horn Air.
  • Ijade Iwakọ Aami (J7-PIN7)
    So iṣelọpọ yii pọ si awọn ẹrọ agbara ti yoo tan ati PA pẹlu imuṣiṣẹ ohun orin Siren (laisi MAN Tone).
  • Awọn abajade itọka opopona (J7-PIN8~PIN10)
    So awọn abajade wọnyi pọ si awọn onirin imuṣiṣẹ ti ẹrọ itọka Ijabọ ti yoo wa ni titan ati PA pẹlu bọtini TA
    • J7-PIN8 si imuṣiṣẹ itọka osi.
    • J7-PIN9 si imuṣiṣẹ itọka ọtun.
    • J7-PIN10 to TA Ikilọ ibere ise

IṢẸ ALAIKỌRỌ AWỌN ỌWỌWỌ
ỌWỌ ALAIGBỌ
ỌWỌ ALAIGBỌ

AKIYESI: Oluṣakoso naa ti wa ni gbigbe laisi awọn bọtini bọtini eyikeyi ti fi sori ẹrọ. Gbe decal ti o fẹ sori bọtini kọọkan.

  • PTT – PA Broadcast (BTN-PTT)
    Tẹ mọlẹ lati mu Gbohungbohun ṣiṣẹ fun Broadcast PA nipasẹ agbọrọsọ siren. Bọtini yii dojuiwọn gbogbo awọn iṣẹ akositiki miiran (ie Air Horn, Siren Tone ati Rebroadcast) lakoko ti o ti muu ṣiṣẹ
  • C1 – CODE1 (BTN1)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu ṣiṣẹ OUTPUT1.
  • C2 – CODE2 (BTN2)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu ṣiṣẹ OUTPUT2 ati [C1].
  • C3 – CODE3 (BTN3)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu ṣiṣẹ OUTPUT3, [C2], [C1] ati [T1]. Ti [T2] ati [T3] ba ṣiṣẹ nigbati o ba n ṣiṣẹ [C3], mu ṣiṣẹ [T2] ati [T3].
  • OKUNRIN (BTN4)
    • Nigbati Siren Tone ko ṣiṣẹ:
      Mu ohun orin MAN WAIL fun igba diẹ ṣiṣẹ nigbati o ba tẹ. Eleyi ohun orin yoo ramp soke lati fowosowopo ipolowo kan pato titi ti o fi tu silẹ (duro lẹsẹkẹsẹ).
    • Nigbati Siren Tone nṣiṣẹ:
      Tẹ lẹẹkan lati yi Ohun orin Siren akọkọ pada si Ohun orin Yipada (Da lori ohun orin ti nṣiṣe lọwọ lọwọlọwọ, Ohun orin Yipada le yatọ); tẹ lẹẹkansi lati yi pada si Ohun orin Siren akọkọ.
    • Nigbati Ipo HF (Ọfẹ Ọwọ) nṣiṣẹ:
      Tẹ lẹẹkan lati bẹrẹ Siren Tone; tẹ lẹẹkansi lati yika nipasẹ gbogbo Akojọ ohun orin HF; tẹ lẹmeji lati pari ohun orin Siren. Atokọ ohun orin HF aiyipada: WAIL> YELP> PHASER> HILO>…
  • AH – Iwo Ofurufu (BTN5)
    Ni akoko diẹ mu ohun orin HORN AIR ṣiṣẹ ati OUTPUT7 nigbati o ba tẹ. Ohun orin yii yoo bori gbogbo Awọn ohun orin Siren miiran ati Rebroadcast lakoko ti o ti muu ṣiṣẹ.
  • HF – Ọ̀FẸ́ (BTN6)
    Tẹ [HF] lẹẹkan lati tẹ Imurasilẹ Ipo HF sii; Lakoko ti o wa ni imurasilẹ, tẹ bọtinni [MAN] tabi [Gbigbe Gbigbe Iwo-iwo] Input (J5-PIN1) ni ẹẹkan lati bẹrẹ Ohun orin Siren; tẹ lẹẹkansi lati yika nipasẹ gbogbo Akojọ ohun orin HF; tẹ lẹmeji lati pari ohun orin Siren. Akojọ ohun orin HF aiyipada: WAIL > YELP > PHASER > HILO > … Lakoko ti [HF] n ṣiṣẹ (ni imurasilẹ tabi ni ohun orin siren), tẹ [HF] lẹẹkansi lati jade ni Ipo HF. Bọtini yii yoo mu [T1], [T2], [T3] ati [RAD] mu ṣiṣẹ.
  • T1 – WAIL (BTN7)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu ṣiṣẹ ohun orin WAIL ati OUTPUT8. Lakoko ti o wa ni ohun orin WAIL, tẹ [MAN] lẹẹkan lati yi Ohun orin Siren akọkọ pada si Ohun orin Yipada ni YELP; tẹ [MAN] lẹẹkansi lati yi pada si ohun orin WAIL. Bọtini yii yoo mu [HF], [T2], [T3] ati [RAD] mu ṣiṣẹ lori imuṣiṣẹ.
  • T2 – YELP (BTN8)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu ohun orin YELP ṣiṣẹ ati OUTPUT8. Lakoko ti o wa ni ohun orin YELP, tẹ [MAN] lẹẹkan lati yi Ohun orin Siren akọkọ pada si Ohun orin Yipada ni PHASER (aka PIERCER); tẹ [MAN] lẹẹkansi lati yi pada si ohun orin YELP. Bọtini yii yoo mu-ṣiṣẹ [HF], [T1], [T3] ati [RAD] ṣiṣẹ lori imuṣiṣẹ.
  • T3 – PHASER/PIERCER (BTN9)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu ohun orin PHASER ṣiṣẹ (aka PIERCER) ati OUTPUT8. Lakoko ti o wa ni ohun orin PHASER, tẹ [MAN] ni ẹẹkan lati yi Ohun orin Siren akọkọ pada lati Yipada ohun orin ni HILO; tẹ [MAN] lẹẹkansi lati yi pada si ohun orin PHASER. Bọtini yii yoo mu [HF], [T1], [T2] ati [RAD] ṣiṣẹ lori imuṣiṣẹ.
  • RAD – REBROADCAST RADIO (BTN10)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu-ṣiṣẹ ohun orin Atunsọ Redio. Bọtini yii yoo mu ṣiṣẹ [HF], [T1], [T2] ati [T3] nigbati o ba mu ṣiṣẹ.
  • TA – itọka Ijabọ (BTN11)
    Tẹ lẹẹkan lati mu OUTPUT9 ṣiṣẹ ati Atọka LED ti nlọ si apa osi; tẹ lẹẹkansi lati mu OUTPUT10 ṣiṣẹ ati Atọka LED ti n lọ si ọtun; tẹ lẹẹkansi lati mu OUTPUT9 ṣiṣẹ, OUTPUT10 ati afihan LED ti n lọ pipin apa osi-ọtun; tẹ lẹẹkansi lati mu OUTPUT11 ṣiṣẹ ati Atọka LED ti nmọlẹ laileto; tẹ lẹẹkansi lati PA.
  • SW12 ~14 (BTN12~14)
    Tẹ lẹẹkan lati mu ṣiṣẹ tabi mu ṣiṣẹ OUTPUT4, OUTPUT5, OUTPUT6.
  • PAA ẹhin (BTN15)
    Tẹ lẹẹkan lati mu-ṣiṣẹ tabi mu ṣiṣẹ ina backlight Green; tun ṣe baìbai Red backlight nigba ti o ti wa ni mu ṣiṣẹ. Bọtini yii yoo mu gbogbo awọn bọtini ti nṣiṣe lọwọ lọwọlọwọ ṣiṣẹ lori imuṣiṣẹ.
  • IKỌRỌ NIPA

PC ETO

Gbogbo awọn bọtini iṣakoso ati awọn okun waya iṣẹ le jẹ adani ati tun ṣe eto si ayanfẹ olumulo fun

Awọn ipo bọtini, Awọn oriṣi Yipada,

  • Tẹ ON, Tu silẹ
  • Tẹ ON, Tẹ PA
  • Tẹ ON, Double Tẹ PA
  • Tẹ ON, Duro PA
  • Tẹ ON, Aago PA
  • Double Tẹ ON, Aago PA

Tii Ipo Fipamọ silẹ, Muu ṣiṣẹ / Muu ṣiṣẹ ti,

  • Bọtini kọọkan / titẹ sii / iṣelọpọ / buzzer / ohun orin / Atọka LED / ina ẹhin

Eto ohun orin, 

  • Ohun orin akọkọ / Ohun orin Daju / Ohun orin alapọpo
  • HF ohun orin Akojọ
  • Pari ara

Iwọn didun, Iṣaaju iṣẹ ( ayo ), Low voltage ipo aabo, Pa idaduro, ati be be lo.

Fun alaye diẹ sii nipa siseto PC ati Software, jọwọ tọka si Afowoyi Software tabi kan si aṣoju tita rẹ.

Fifi sori ẹrọ

Iṣagbesori

  • Siren ampitanna
  1. Yan ipo ti ko fara han taara si awọn eroja oju ojo, gẹgẹbi ogiriina ti awakọ, labẹ ijoko, tabi ninu ẹhin mọto; yago fun eyikeyi kikọlu ti air apo imuṣiṣẹ.
  2. Lilo siren amplifier bi awoṣe, samisi mẹrin iṣagbesori ihò lati wa ni ti gbẹ iho.
  3. Lu mẹrin iṣagbesori ihò fun dì irin skru.
  4. Fi sori ẹrọ siren amplifier pẹlu pese dì irin skru.
    Iṣagbesori

agekuru adarí

  1. Yan ipo kan nibiti o rọrun si oniṣẹ; yago fun eyikeyi kikọlu ti air apo imuṣiṣẹ.
  2. Lilo agekuru iṣagbesori bi awoṣe, samisi awọn ihò meji ti yoo lu.
  3. Lu meji iṣagbesori ihò fun dì irin skru.
  4. Fi agekuru gbohungbohun sori ẹrọ pẹlu awọn skru irin dì ti a pese.
    Iṣagbesori

Aami Ikilọ IKILO

EWU FUNFUN - Irin, irin ati/tabi awọn ohun elo irin miiran le ni ifamọra lojiji ati ni agbara si awọn oofa, ṣiṣẹda eewu ti awọn ipalara iru-pọn. Jeki gbogbo irin kekere ati irin irinṣẹ ati ẹrọ daradara kuro lati awọn oofa ni gbogbo igba.

PATAKI! - Rii daju lati tọju oludari kuro ni ipo iṣagbesori titi ti o fi sọ di mimọ eyikeyi awọn irun irin tabi idoti miiran

Awọn iwe aṣẹ / Awọn orisun

cell2 SDP212H Eto Siren Amplifier System pẹlu 15 Bọtini amusowo Adarí [pdf] Afowoyi olumulo
SDP212H, Siren siseto Amplifier System pẹlu 15 Bọtini amusowo Adarí, SDP212H Programmable Siren Amplifier System pẹlu 15 Bọtini amusowo Adarí, SDP212H Programmable Siren Amplifier System, Siren siseto Amplifier System, Siren AmpEto alafin, Amplifier System

Awọn itọkasi

jẹmọ Posts

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *