Cell2 SDP212H Programmable Siren Amplifier System nrog 15 Nyees khawm Handheld Controller Tus neeg siv phau ntawv

CEEB TOOM

1. Kev txhim kho kom zoo ntawm cov khoom xav kom tus installer muaj kev nkag siab zoo ntawm cov khoom siv hluav taws xob hauv tsheb, tshuab thiab cov txheej txheem. Nws yog ib qho tseem ceeb rau nruab chav tsev kom zoo kom muaj kev nyab xeeb thiab txhim khu kev qha.
2. Thov nyeem tag nrho cov lus qhia kom ntxaws thiab ua tib zoo ua ntej txhim kho chav tsev.
3. Kev ua tsis tau raws li cov lus qhia no yuav ua rau muaj kev puas tsuaj loj rau lub tsev lossis lub tsheb thiab tuaj yeem lav tsis tau.
4. Qhov tseeb mounting thiab xaim yog tus yuam sij rau kev ua tau zoo ntawm SDP212H.
5. Cov neeg tsim khoom yuav tsum nyeem thiab ua raws li cov lus qhia thiab cov lus ceeb toom hauv phau ntawv qhia los ntawm thawj cov chaw tsim khoom.
6. Tus neeg teb xov tooj yuav tsum xyuas kom meej tias lub siren yog fastened rau lub tsheb kom ruaj ntseg thiab ua haujlwm zoo. Kev tsis ua raws li txhua qhov kev tiv thaiv kev nyab xeeb thiab cov lus qhia yuav ua rau muaj kev puas tsuaj, kev raug mob, lossis kev tuag.
7. Xyuas kom meej tias txhua tus tswj vaj huam sib luag nyob rau hauv ib cheeb tsam uas tso cai rau ob lub tsheb thiab cov tswj vaj huam sib luag kom ua tau zoo nyob rau hauv txhua yam kev tsav tsheb.

CEEB TOOM

Suab Hazard - Cov suab nrov ntawm tus hais lus siren (109dB ntawm 2M) tuaj yeem ua rau hnov ​​​​lus puas. Tsis txhob khiav lub siren yam tsis muaj kev tiv thaiv kev hnov ​​lus txaus rau koj thiab ib tus neeg nyob ib puag ncig tam sim .n (Ref. OSHA 1910.95 rau cov lus qhia ua haujlwm rau lub suab nrov)

TSEEM CEEB

1. Siren ampua x1pc
   
2. 4-PIN hwj chim hlua x 1 pc
3. 4-PIN siab tam sim no relay outputs hlua x 1 pc
4. 4-PIN speaker harness x 1 pc
5. 8-PIN inputs hlua x 1 pc
6. 10-PIN mid/low tam sim no relay outputs hlua x 1 pc
   
7. Sheet hlau screws x 4 pcs (ø4 x 16mm)
   
8. Controller x 1 pc
   
9. Controller clip x 1 pc
   
10. Sheet hlau screws x 2 pcs (ø4 x 16mm)
    
11. Decal x 1 set
12. Phau ntawv x 1 pc
    

Cov khoom siv

1. Extension cable x 1 pc (4m)
2. RJ45 txuas
   

SPECIFICATIONS

• Cov lus qhia Voltage: 12 ~ 24VDC
• Siren Output zog: 200W (100W x 2)
• Siren Output Load: 100W-ACR 11Ω
• Siren Zaus: 759Hz - 1592Hz (tej zaum yuav txawv ntawm PC teeb tsa)
• Max. Tam sim no (Siren nkaus xwb): 20A @ 12VDC / 10A @ 24VDC (w / o lub teeb tswj cov zis) Standby Tam sim no: 0 mA (w / o IGN xaim) / <0.35 A (w / IGN hlau)
• Kev khiav hauj lwm qhov kub thiab txias: -30 ~ 65
• Lub teeb Controls Output: 15A x3, 10A x3, 2A x2, 0.25A x4 Fuse Rating:
• Hniav Fuse: 30A x1, 15A x3, 10A x3, 2A x2
• Resettable Fuse: 0.25 x4a
• Dimensions(amplifier): 190mm x 217mm x 45.6mm
• Dimensions (controller): 66.4mm x 134mm x 26.9mm

THAWJ

• Cov kab kos duab:
  
  

4-PIN POWER Harness (J2 Connector)

• Fais fab +VDC & -GND (J2-PIN1 ~PIN3 & J2-PIN4)

1. Txuas peb RED xov hlau mus rau qhov zoo (+) roj teeb lub davhlau ya nyob twg. Fuse txhua xaim ntawm nws tus kheej @30 Amps (tus neeg siv khoom siv). TSIS TXHOB txhim kho cov fuses kom txog thaum cov xaim rau tag nrho cov kab ke ua tiav.
2. Txuas BLACK hlau rau lub tsheb chassis hauv av (feem ntau nyob ib sab ntawm lub roj teeb).
3. Txuas lub Connector rau hauv lub siren amptsev neeg muaj sia nyob.

4-PIN Speaker Harness (J8 Connector)

• Speaker 1 Tawm (J8-PIN1 ~ PIN2)
  Txuas GREY (SPK1-) thiab BLUE (SPK1+) cov xov hlau rau ib qho 100W 11-ohm impedance hais lus.
• Speaker 2 Tawm (J8-PIN3 ~ PIN4)
  Txuas lub WHITE (SPK2+) thiab RED (SPK2-) xov hlau rau ib qho 100W 11 ohm impedance hais lus.

CEEB TOOM: Tsis txhob sim txuas ob tus neeg hais lus nyob rau hauv tib lub sijhawm lossis series ntawm ib khub ntawm Speaker outlets.

8-PIN INPUTS hlua (J5 Connector)

• Ignition Input (J5-PIN5)
  Qhov no ua haujlwm raws li lub zog hloov pauv rau tag nrho chav tsev. Txuas lub RED xov hlau no mus rau qhov zoo Circuit Court tswj los ntawm lub tsheb ignition hloov kom tso cai rau lub siren amplifier yuav tsum qhib & tawm ua ke. Lub kaw lus tsis ua haujlwm yam tsis muaj Ignition Activation. TSIS TXHOB txuas cov hlau no ncaj qha rau lub roj teeb vim qhov no yuav ua rau lub roj teeb ntws tawm.
• Programmable Logic Inputs (J5-PIN1 ~ PIN4)
  Plaub qhov kev tawm tswv yim no tuaj yeem raug programmed los qhib lwm Cov Khawm, Tawm tswv yim, Tawm, Siren thiab / lossis lwm yam ntawm kev hloov pauv zoo lossis tsis zoo. Los ntawm lub neej ntawd, lawv ua haujlwm li Horn-Ring, Park Kill thiab Dual Tone inputs:
  • Horn-Nplhaib Transfer Input (J5-PIN1)
    Txuas cov tswv yim no rau lub tsheb horn nplhaib Circuit Court; thov +VDC tsis tu ncua rau GREEN hlau rau Cua Horn Tone. Lub suab no yuav dhau mus ib ntus tag nrho lwm yam Siren Tones thiab xov tooj cua Rebroadcast thaum nws qhib. Yog tias hom Hand-Free ua haujlwm, ib ntus thov +VDC los pib lub Siren, coj mus rhaub dua los hloov lub suab thiab ob npaug kais kom kawg Siren. Cov tswv yim no kuj qhib OUTPUT7 thaum nws ua haujlwm.
  • Park Kill Input (J5-PIN2)
    Txuas cov tswv yim no rau lub tsheb Park Shift Circuit Court; thov +VDC tsis tu ncua rau PURPLE hlau rau ib ntus mute ntawm tag nrho lwm yam Siren Tones thiab xov tooj cua Rebroadcast thaum nws qhib. Thaum tso tawm, tag nrho cov suab nrov thiab xov tooj cua Rebroadcast yuav rov pib dua (yog tias tsim nyog).
  • Logic Input 3 (J5-PIN3)
    Thov +VDC txuas ntxiv mus rau YELLOW hlau kom qhib OUTPUT12.
  • Dual Tone Input (J5-PIN4)
    Thov +VDC tsis tu ncua rau GREY hlau los qhib lub suab sib tov rau kev simulated Multi-Speakers effectwhile Siren Tone tseem ua haujlwm.
• Programmable Analogue Input (J5-PIN6)
  Qhov no analogue input tej zaum yuav programmed mus qhib lwm yam khawm, Input, Output, Siren thiab/los yog lwm yam raws li qhov sib txawv input vol.tage (ntawm 1VDC txog 32VDC). Los ntawm lub neej ntawd, qhov kev tawm tswv yim no ua haujlwm raws li lub zog backlight ON input:
  • Backlight ON input (J5-PIN6)
    Thov +VDC tsis tu ncua rau BLUE hlau los qhib lub teeb rov qab ntawm tus tswj tuav.
• Xov tooj cua Re-broadcast Input (J5-PIN7 ~PIN8)
  Txuas WHITE thiab BROWN xov hlau mus rau cov lus tso tawm ntawm lub xov tooj cua console

4-PIN HIGH CURRENT RELAY OUTPUTS Khawm (J6 Connector)

• OUTPUT1~3 (J6-PIN1~PIN3) Txuas rau cov cuab yeej pab txhawb zog mus txog 15 Amps max.
• NA (J6-PIN4) Tsis siv.

10-PIN MID/Low CURRENT RELAY OUTPUTS Harness (J7 Connector)

• OUTPUT4~5 (J7-PIN1~PIN2)
  Txuas rau cov cuab yeej pab txhawb zog mus txog 10 Amps max.
• OUTPUT6 (J7-PIN3) & OUTPUT6 Qhuav Hu (J7-PIN4)
  OUTPUT6 tuaj yeem ua haujlwm hauv ib qho ntawm ob qhov xwm txheej hauv qab no raws li nws txoj haujlwm Fuse:
  • FUSE Txoj Haujlwm 1 - Lub Hom Phiaj Tshaj Tawm (Factory Default)  Txuas J7-PIN3 rau cov khoom siv pab txhawb zog txog 10 Amps max.
  • FUSE Txoj Haujlwm 2 - Qhuav Hu Rau Relay
    Txuas J7-PIN3 (RED) thiab J7-PIN4 (ORANGE) txhua tus mus rau ib lub cuab yeej uas ob lub cuab yeej yuav txuas nrog thaum OUTPUT6 qhib.
    
• OUTPUT7~8 (J7-PIN6~PIN7)
  Txuas rau cov cuab yeej pab txhawb zog mus txog 2 Amps max. los yog siv li Lightbar muaj nuj nqi ua kom hloov.
• OUTPUT9~12 (J7-PIN8~PIN10, PIN5)
  Txuas rau cov cuab yeej pab txhawb zog mus txog 0.25 Amps max. los yog siv li Lightbar muaj nuj nqi ua kom hloov.

DEFAULT OUTPUT WIRING
Tshwj tsis yog lwm yam rov programmed ntawm PC software. Los ntawm lub neej ntawd, cov Output xov hlau ua haujlwm raws li Ua raws

• CODE1~CODE3 Output (J6-PIN1~PIN3)
  Txuas txhua qhov ntawm peb qhov tawm mus rau cov khoom siv hluav taws xob uas yuav qhib thiab kaw nrog CODE1, CODE2 thiab CODE3 nyees khawm feem.
• SW12~SW14 Output (J7-PIN1~PIN3)
  Txuas txhua qhov ntawm peb qhov tso tawm rau cov khoom siv hluav taws xob uas yuav qhib thiab kaw nrog SW12, SW13 thiab SW14 khawm raws li.
• Logic Input 3 Output (J7-PIN5)
  Txuas cov zis no rau cov khoom siv hluav taws xob uas yuav qhib thiab kaw nrog Logic Input 3.
• Horn-ring Warning Output (J7-PIN6)
  Txuas cov zis no rau cov khoom siv fais fab uas yuav qhib thiab kaw nrog Horn-Ring Hloov cov tswv yim lossis Air Horn khawm.
• Icon Driver Output (J7-PIN7)
  Txuas cov zis no rau cov khoom siv hluav taws xob uas yuav qhib thiab kaw nrog Siren Tone ua kom (tsis suav nrog MAN Tone).
• Traffic Arrow Outputs (J7-PIN8 ~ PIN10)
  Txuas cov txiaj ntsig no mus rau kev ua kom cov xov hlau ntawm lub tsheb ciav hlau uas yuav qhib thiab kaw nrog TA khawm
  • J7-PIN8 rau Left Arrow activation.
  • J7-PIN9 rau txoj cai xub ua kom.
  • J7-PIN10 rau TA Warning activation

DAIM NTAWV THOV KEV PAB CUAM TSHUAJ TIV THAIV

CEEB TOOM: Tus maub los yog xa tawm yam tsis muaj khawm decals ntsia. Muab qhov xav tau decal rau txhua lub pob.

• PTT - PA tshaj tawm (BTN-PTT)
  Nias thiab tuav kom qhib Microphone rau PA tshaj tawm los ntawm tus neeg hais lus siren. Lub khawm no overrides tag nrho lwm yam acoustic functions (ie Air Horn, Siren Tone thiab Xov tooj cua Rebroadcast) thaum nws qhib.
• C1 - CODE1 (BTN1)
  Nias ib zaug kom qhib lossis de-activate OUTPUT1.
• C2 - CODE2 (BTN2)
  Nias ib zaug kom qhib lossis tshem tawm OUTPUT2 thiab [C1].
• C3 - CODE3 (BTN3)
  Nias ib zaug kom qhib lossis tshem tawm OUTPUT3, [C2], [C1] thiab [T1]. Yog tias [T2] thiab [T3] ua haujlwm thaum de-activate [C3], de-activate [T2] thiab [T3].
• MAN (BTN4)
  • Thaum Siren Tone tsis ua haujlwm:
    Qhib lub sijhawm MAN WIL tone thaum nias. Lub suab no yuav ramp mus txhawb nqa ib lub suab kom txog thaum tso tawm (tso tseg tam sim ntawd).
  • Thaum Siren Tone ua haujlwm:
    Nias ib zaug los hloov Primary Siren Tone rau Override Tone (Raws li lub suab nrov tam sim no, Override Tone yuav txawv); nias dua kom rov qab mus rau Thawj Siren Tone.
  • Thaum HF Hom (Hand-Free) ua haujlwm:
    Nias ib zaug kom pib Siren Tone; nias rov mus rau lub voj voog ntawm txhua HF Tone List; ob npaug nias kom xaus Siren Tone. Default HF Tone List: WAIL > YELP > PHASER > HILO > …
• AH - HUV (BTN5)
  Tam sim no qhib lub suab AIR HORN thiab OUTPUT7 thaum nws nias. Lub suab no yuav hla tag nrho lwm yam Siren Tones thiab Xov Tooj Cua Rebroadcast thaum nws qhib.
• HF - HAND-DAWB (BTN6)
  Nias [HF] ib zaug kom nkag mus rau HF hom Standby; Thaum nyob rau hauv standby, nias [MAN] khawm lossis [Horn-Ring Hloov] Input (J5-PIN1) ib zaug pib Siren Tone; nias rov mus rau lub voj voog ntawm txhua HF Tone List; ob npaug nias kom xaus Siren Tone. Default HF Tone List: WAIL > YELP > PHASER > HILO > … Thaum [HF] ua haujlwm (hauv standby lossis hauv suab nrov), nias [HF] dua kom tawm HF hom. Cov khawm no yuav de-activate [T1], [T2], [T3] thiab [RAD] thaum ua kom.
• T1 - WAIL (BTN7)
  Nias ib zaug kom qhib lossis tshem tawm WAIL suab thiab OUTPUT8. Thaum nyob hauv WAIL lub suab, nias [MAN] ib zaug los hloov Lub Sij Hawm Siren Tone rau Tshaj Tawm hauv YELP; nias [MAN] dua kom rov qab mus rau WIL tone. Cov khawm no yuav de-activate [HF], [T2], [T3] thiab [RAD] thaum ua kom.
• T2 – YELP (BTN8)
  Nias ib zaug los qhib lossis de-activate YELP suab thiab OUTPUT8. Thaum nyob hauv YELP suab, nias [Tus txiv neej] ib zaug los hloov Primary Siren Tone rau Override Tone hauv PHASER (aka PIERCER); nias [MAN] dua kom rov qab mus rau YELP suab. Cov khawm no yuav de-activate [HF], [T1], [T3] thiab [RAD] thaum ua kom.
• T3 - PHASER/PIERCER (BTN9)
  Nias ib zaug kom qhib lossis tshem tawm PHASER tone (aka PIERCER) thiab OUTPUT8. Thaum nyob hauv PHASER suab, nias [Tus txiv neej] ib zaug los hloov Primary Siren Tone rau Override Tone hauv HILO; nias [MAN] dua kom rov qab mus rau PHASER tone. Lub khawm no yuav qhib lub [HF], [T1], [T2] thiab [RAD] thaum ua kom.
• RAD - Xov tooj cua REBROADCAST (BTN10)
  Nias ib zaug kom qhib lossis tshem tawm xov tooj cua Rebroadcast suab. Lub khawm no yuav de-activate [HF], [T1], [T2] thiab [T3] thaum ua kom.
• TA - TRAFFIC ARROW (BTN11)
  Nias ib zaug kom qhib OUTPUT9 thiab LED qhov taw qhia mus rau sab laug; nias dua kom qhib OUTPUT10 thiab LED qhov taw qhia mus txoj cai; nias dua kom qhib OUTPUT9, OUTPUT10 thiab LED qhov taw qhia mus rau sab laug-txoj cai; nias dua kom qhib OUTPUT11 thiab LED qhov taw qhia flashing randomly; nias dua rau OFF.
• TSW 12 ~ 14 (BTN 12 ~ 14)
  Nias ib zaug kom qhib lossis tshem tawm OUTPUT4, OUTPUT5, OUTPUT6.
• BACKLIGHT OFF (BTN15)
  Nias ib zaug kom de-activate lossis qhib Green backlight; kuj dim Red backlight thaum nws qhib. Cov khawm no yuav de-activate tag nrho cov nyees khawm tam sim no thaum ua kom tiav.
• QUICK REFERENCE

PC PROGRAMMING

Tag nrho cov nyees khawm tswj thiab cov xov hlau ua haujlwm tuaj yeem raug kho thiab rov ua haujlwm rau cov neeg siv khoom nyiam

Khawm hom, Hloov hom,

• Nias ON, tso OFF
• Nias ON, Nias OFF
• Nias ON, Ob npaug nias OFF
• Nias ON, Tuav OFF
• Nias ON, Timer OFF
• Ob npaug nias ON, Timer OFF

Shut Down Txuag Status, Ua kom / Deactivation ntawm,

• Txhua lub pob / tawm tswv yim / tso zis / buzzer / suab / LED taw qhia / backlight

Tone Settings, 

• Thawj Tone / Override Tone / Tone Tone
• HF Tone List
• Ua tiav cov style

Volume, Function precedence (priority), Tsawg voltage tiv thaiv hom, Shut Down ncua, thiab lwm yam.

Yog xav paub ntxiv txog PC programming thiab Software, thov mus saib Software Manual lossis hu rau koj tus neeg muag khoom.

INSTALLATION

Mounting

• Siren ampua neej nyob

1. Xaiv qhov chaw uas tsis raug ncaj qha rau cov huab cua, xws li tus tsav tsheb lub qhov hluav taws xob, hauv qab lub rooj zaum, lossis hauv lub cev; zam kev cuam tshuam ntawm kev xa cov hnab pa tawm.
2. Siv lub siren amplifier raws li ib tug template, kos plaub mounting qhov yuav tsum tau drilled.
3. Laum plaub qhov mounting qhov rau cov ntawv hlau ntsia hlau.
4. Nruab lub siren amplifier nrog muab cov ntawv hlau screws.
   

Controller clip

1. Xaiv qhov chaw uas yooj yim rau tus neeg teb xov tooj; zam kev cuam tshuam ntawm kev xa cov hnab pa tawm.
2. Siv lub mounting clip raws li ib tug template, kos ob lub qhov yuav tsum tau drilled.
3. Laum ob lub qhov mounting rau cov ntawv hlau ntsia hlau.
4. Txhim kho lub microphone clip nrog muab cov ntawv hlau ntsia hlau.
   

CEEB TOOM

PINCH HAZARD - Hlau, hlau thiab / lossis lwm yam khoom siv ferrous tuaj yeem nyiam tam sim ntawd thiab quab yuam rau cov hlau nplaum, tsim kom muaj kev pheej hmoo ntawm kev raug mob pinch. Khaws tag nrho cov hlau me me thiab cov cuab yeej hlau thiab cov khoom siv kom deb ntawm cov hlau nplaum txhua lub sijhawm.

TSEEM CEEB! - Nco ntsoov khaws tus tswj kom deb ntawm qhov chaw txuas mus txog thaum koj tau ntxuav cov hlau shavings lossis lwm cov khib nyiab

Cov ntaub ntawv / Cov ntaub ntawv

Cell2 SDP212H Programmable Siren Amplifier System nrog 15 Khawm Handheld Controller [ua pdf] Tus neeg siv phau ntawv SDP212H, Programmable Siren Amplifier System nrog 15 Khawm Handheld Controller, SDP212H Programmable Siren Amplifier System nrog 15 Khawm Handheld Controller, SDP212H Programmable Siren Amplifier System, Programmable Siren Amplifier System, Siren AmpLifier System, Amplifier System

Cov ntaub ntawv

• Cov neeg siv phau ntawv