xpr XS Series Mifare Reader and Keypad

Product Specifications

• Product Name: Xsmart Range Mifare Reader & Keypad
• Model Numbers:
  • XS-K-MF-W
  • XS-K-MF-W-X
  • XS-K-MF-RS
  • XS-K-MF-RS-X
  • XS-MF-W
  • XS-MF-W-X
  • XS-MF-RS
  • XS-MF-RS-X
• Mounting: Wall mounting with rubber gasket
• Dimensions: 5 mm thickness, various screw sizes for mounting
• Communication: Micro USB, RS-485 bus configuration
• Cable Type: Multiconductor cable with shielding
• LED Indicators: OFFLINE status indicated by a rapidly blinking red LED

Product Usage Instructions

Mounting Instructions:

1. Place the device on the desired location on the wall.
2. Use the provided rubber gasket to ensure a secure fit.
3. Secure the device using the specified screws and follow the vfront/back indications.

Connection Setup:

Connect the device using the Micro USB port and configure the RS-485 bus according to the provided specifications.

Cable Installation:

Use the recommended multiconductor cable with shielding for proper communication. Ensure correct wiring and distances for optimal performance.

Frequently Asked Questions

Q: What does the rapidly blinking red LED indicate?

A: The red LED blinking rapidly indicates that the device is in an OFFLINE status, meaning it has lost communication with the controller.

Q: How should I address an OFFLINE status on the device?

A: To address an OFFLINE status, check the communication connections, reset the device if necessary, and ensure proper configuration settings.

Q: Can I use a different type of cable for installation?

A: It is recommended to use the specified multiconductor cable with shielding to maintain proper communication and performance of the device.

Xsmart Range: Mifare Reader & Keypad with Mifare

SPECIFICATIONS

MOUNTING

MOUNTING WITH MT-SPACER

FERRITE CORE MOUNTING

TERMINAL BLOCKS AND DIPSWITCH

TERMINALS

CABLING

SIGNALISATION

DEFAULT CONFIGURATIONS

• Online solution: XS-MF-W & XS-K-MF-W factory setting is to read CSN and Wiegand 34 bit. XS-MF-W-X & XS-K-MF-W-X factory setting is to read
  Xsecure credentials and Wiegand 34 bit. In order to change the default settings, please use the PROS CS software.
• Web server solution: XS-MF-RS & XS-K-MF-RS factory setting is to read CSN. XS-MF-RS-X & XS-K-MF-RS-X factory setting is to read Xsecure credentials.
  In order to get the configuration software (Product Manager) and change the default settings, please contact us at: info@xprgroup.com

ACCESSORIES (OPTIONAL)/ ACCESSOIRES (EN OPTION)

www.xprgroup.com

Documents / Resources

xpr XS Series Mifare Reader and Keypad [pdf] Installation Guide XS-K-MF-W, XS-K-MF-W-X, XS-K-MF-RS, XS-K-MF-RS-X, XS-MF-W, XS-MF-W-X, XS-MF-RS, XS-MF-RS-X, XS Series Mifare Reader and Keypad, XS Series, Mifare Reader and Keypad, Reader and Keypad, Keypad

References

• User Manual