Studio Multi Gym
“
Product Specifications:
- Locking Frame: 1 unit
- Pulley: 1 unit
- Bracket: 2 units
- HEX Bolt: 1 unit
- Allen Wrench (6#): 2 units
- Allen Wrench (5#): 1 unit
- Allen Wrench (4#): 1 unit
- Allen Wrench (3#): 1 unit
Product Usage Instructions:
Assembly:
- Identify all parts listed in the manual.
- Start by attaching the Locking Frame to the Bracket using the
provided HEX Bolt. - Secure the Pulley to the assembled frame using the appropriate
Allen Wrench. - Ensure all connections are tight and secure before use.
Operation:
- Place the product in the desired location for use.
- Adjust the Locking Frame as needed for your specific
application. - Engage the Pulley with the desired equipment for
operation. - Follow all safety guidelines and precautions during use.
Frequently Asked Questions (FAQ):
Q: How do I adjust the Locking Frame?
A: To adjust the Locking Frame, use the provided Allen Wrench to
loosen the bolts, position the frame as needed, and then tighten
the bolts securely.
Q: What maintenance is required for the product?
A: Regularly check all connections and moving parts for wear or
damage. Lubricate moving components as needed to ensure smooth
operation.
Q: Can additional parts be ordered for this product?
A: Yes, additional parts can be ordered directly from our
customer service department. Contact us for more information.
“`
Page: 1
Page: 2
Page: 3
Page: 4
Page: 5
Page: 6
Page: 7
Page: 8
Page: 9
Page: 10
Page: 11
Page: 12
Page: 13
Page: 14
Page: 15
Page: 16
Page: 17
Page: 18
Page: 19
KEY NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
PART DESCRIPTION
Base Frame Rear Base Frame Front Stand Vertical Frame Front Butterfly Support Upper Frame Support Rear Guide Rod Rear Top Frame Front Press Base Front Press Support Front Seat Support Leg Developer Foam Frame Top Connecting Frame Base Connecting Frame Backrest Support Butterfly L Butterlfy R Pulley Case Front Press Base Adjustable Shiver Bar Foam Rod Pulley Bracket Adjustable Pulley Bracket Bushing Seat Pad Backrest Board Adjustable Backrest Board Decorative Plate Decorative Plate Decorative Plate D Washer Silk Shaft Silk Shaft Front Cover Weight Stack Cover Upper Cable Connectable Cable Butterfly Cable Lock Knob Lat Bar Shiver Bar Lock Knob Cover Cap Pin Axle Spring Chain Joint Lock Knob Rack Liner Foam Roll Bar End Selector Rod Top Weight Plate Weight Plate Weight Plate Sticker Weight Selector Pin Nylon Strap Iso-Handle Ankle Strap 6-Joint Chain 10-Joint Chain 15-Joint Chain Hook Decorative Wheel Small Pulley with Bearing Pulley Bearing Bearing
SPEC
236x101x3 Ø30xØ25.5×3 360x250x430x65 366x520x65 R290xR240x6 R287xR243x1.5 R125xR80x1.5 R85xR45x1.5 Ø38×3 Ø12x131xM8 Ø10x30xM8 272x107x90x2 1793xR91.5×1 L=4305 L=3580 L=5600
21xM18x1.5×18 Ø16×106 Ø12.4xØ1.2×38.2 08A(12.7) M18xØ10 90x45x5 Ø125xØ22×215 Ø38xØ9×8 Ø25×563 (19+1) 230x65x72 250x100x25.4 (10LB) 10LB – 200LB L=245mm 6 10 15 Ø8 Ø37.5×6.5×19 Ø27×24 Ø72xØ10 Ø96 6004 61905
Page: 20
QTY
1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 4 2 1 1 1 1 1 2 2 2 2 1 2 1 1 1 1 1 1 1 2 2 2 2 1 1 6 2 1 1 19 1 1 2 1 2 1 1 8 4 3 5 20 4 4
KEY NO.
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 103 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138
PART DESCRIPTION
Hole Circlip Brushing Brushing Brushing Handle Handle Small Pulley with Bearing End Cap End Cap End Cap End Cap Slide Guide Rubber Stopper Rubber Stopper Rubber Stopper Floor End Cap Foam Baffle Foam Inner Baffle End Cover Spring Washer Spring Washer Washer Washer Washer Washer Nut Nut Nut HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt HEX Bolt Allen Bolt Allen Bolt Allen Bolt Allen Bolt Allen Bolt Allen Bolt Hexagon Socket Countersunk Head Screws Hexagon Socket Countersunk Head Screws Philips Screw Set Screw Philips Screw Allen Bolt Floor End Cap Foot Plate Rack Liner Magnet Bushing Philips Screw Philips Screw Allen Bolt Upper Frame Lower Frame Plate Regulating Shaft Cable Spacer Sleeve Retaining Ring
SPEC 25 Ø25xØ10.5×12 Ø25xØ20Ø12.2×10 Ø38xØ34xØ25×22 Ø20×114 Ø27.5x3x135 Ø50xØ10 25 Ø32 Ø50 PT50x100 PT50x100/PT40x80x147 Ø30xØ25×30 Ø62xØ24.5×25 Ø45×40 PT145x95x9 Ø68×5.7 Ø70xØ26×9.5 Ø50×5.7 10/336HV 12 8 10 12 Ø25x11x2 M8 M10 M12 M10x25 M10x45 M10x65 M10x70 M10x75 M10x90 M10x115 M10x125 M10x140 M10x145 M12x20 M12x30 M12x130 M12x145 M8x16 M8x25 M8x45 M10x16 M10x30 M10x95 M8x20 M6x10 M4x6 M6x6 M6x16 Ø20xM8x12 PT170x107x15
70x45x5 Ø25xØ5×4 Ø25xØ16×12.2×5 M5x12 M4x10 M10x55
30x14x3xM4 Ø25×75 L=1180 Ø30x2x8 Ø38xØ29.2×14.5xM6
Page: 21
QTY
2 10 6 4 4 4 1 4 4 2 2 1 1 4 1 4 6 6 4 2 4 18 98 15 1 3 43 6 4 13 11 5 2 1 3 2 6 5 1 2 2 2 8 6 3 4 1 2 10 6 8 4 1 4 2 1 2 2 2 8 6 1 2 2 4 1 1 2 4
KEY NO. 139 140 141
PART DESCRIPTION
Locking Frame Pulley Bracket HEX Bolt Allen Wrench Allen Wrench Allen Wrench Allen Wrench
M12x135 6# 5# 4# 3#
SPEC
QTY 1 1 2 1 2 1 1
Page: 22
Documents / Resources
 |
XPEED Studio Multi Gym [pdf] Installation Guide Studio Multi Gym, Multi Gym, Gym |
