I-ESP8266 8 Imodyuli ye-WiFi yokudlulisa
Incwadi Yemiyalelo

Isingeniso sehardware kunye nenkcazo

1, Ubungakanani bebhodi: 150100mm
Ubunzima: 284g

Intshayelelo Intshayelelo

Ichweba lokuCwangcisa: I-GND, i-RX, i-TX, i-5V ye-ESP8266 ngokulandelanayo ixhunywe kwi-GND yemodyuli ye-serial port ye-TTL yangaphandle, i-TX, i-RX, i-5V, i-00 idinga ukuxhunywa kwi-GND xa ikhuphela, qhawula uxhumano phakathi kwe-I00 kunye ne-GND emva kokukhuphela;
edluliselwe imveliso
I-NC: I-terminal eqhelekileyo ivaliwe, i-relay i-short-circuited kunye ne-COM ngaphambi kokuba itsalwe ngaphakathi, kwaye ishiywe emoyeni emva kokuba ipuliwe;
I-COM: i-terminal kawonke-wonke;
Hayi: Ngokuqhelekileyo ivuliwe, i-relay imisiwe ngaphambi kokuvalwa, kwaye ifutshane-ijikelezwe nge-COM emva kokuvala.

Intshayelelo yezibuko elikhokelayo leGPIO

Adn ukuseta uphuhliso lwemekobume

I-ESP32 ixhasa i-Eclipse/Adn IDE kunye nezinye izixhobo zophuhliso. ilula ngokwentelekiso touseAdn __. Oku kulandelayo yindlela yokwakha imekobume yophuhliso lweAdn

1. Faka i-ide1.89 okanye inguqulelo yamva nje
2. Vula i-ide, cofa File-Okukhethwa kukho kwibar yemenyu, kwaye emva kokufaka izinto ozikhethayo, cofa Yongeza URL
   http://arduino.esp8266.com/stable/packageesp8266comindex.json kuMphathi weBhodi yoPhuhliso oloNgezelelweyo URLs”
3. Cofa kwiZixhobo zoPhuhliso lwe-Soard-Development Manager kwi-menu bar, uze ukhangele "ESP8266" ukufaka iphakheji yenkxaso ye-Ad n ye-ESP8266 2.5.2 okanye inguqulelo yamva nje.Phawula: Ukusukela ukukhuphela URL isuka phesheya, isantya sofikelelo sicotha noko, kwaye kunokubakho iimpazamo zokukhuphela. Zama nje amaxesha ambalwa xa inethiwekhi ilungile.
4. Ukhuphelo lwenkqubo
   1. Sebenzisa i-jumper cap ukudibanisa }00 kunye ne-GND izikhonkwane, lungiselela uthotho lwemodyuli ye-TTL yezibuko (ye example: FT232) kwaye uyiplage kwi-USB yekhompyuter, indlela yoqhagamshelo phakathi kothotho lwemodyuli yezibuko kunye nebhodi yophuhliso imi ngolu hlobo lulandelayo lwemodyuli yezibuko ye-TTL.
      

      Imodyuli yesiriyali ye-TTL yezibuko	Ibhodi yophuhliso ye-ESP8266
      GND	GND
      TX	RX
      RX	TX
      5V	5V

   2. Cofa izixhobo - IBhodi yoPhuhliso kwibar yemenyu kwaye ukhethe ibhodi yophuhliso njenge-Espino (imodyuli ye-ESP-12)
   3. Vula inkqubo eza kukhutshelwa, cofa i-Tools-Port kwibar yemenyu ukukhetha inombolo yezibuko echanekileyo
   4. Emva kokucofa "Layisha", inkqubo iya kuqulunqwa ngokuzenzekelayo kwaye ikhutshelwe kwibhodi yophuhliso, ngolu hlobo lulandelayo:
5. Ekugqibeleni qhawula uxhulumaniso phakathi kwe-00 kunye ne-GND, amandla kwibhodi yophuhliso kwakhona okanye ucinezele iqhosha lokuseta kwakhona ukuqhuba inkqubo.

Amaxwebhu / Izibonelelo

TARJ ESP8266 8 Relay WiFi Module [pdf] Incwadi Yomyalelo I-ESP8266 8 Imodyuli ye-WiFi yokudlulisa, i-ESP8266, iModyuli ye-WiFi edluliselwe kwi-8, iModyuli yeWiFi, iModyuli

Iimbekiselo

• Incwadi yokusebenzisa