V2403C Series
Isikhokelo sokuFakela ngokukhawuleza
IiKhompyutha ezizinzisiweyo
Uguqulelo 1.2, May 2022
Ngaphezuluview
Iikhomputha ezifakwe kwi-V2403C Series zakhiwe malunga ne-Intel® Core™ i7/i5/i3 okanye i-Intel® Celeron® yokusebenza okuphezulu kwaye iza ne-32 GB RAM, i-slot enye ye-mSATA, kunye ne-HDD / SSD ezimbini zokwandisa ukugcinwa. Iikhompyuter ziyahambelana ne-EN 50121-4, uphawu lwe-E1, kunye nemigangatho ye-ISO-7637-2 ezenza zilungele indawo kaloliwe.
kunye nezicelo zemoto.
iikhompyutha V2403C baxhotyiswe iseti osisityebi ujongano kuquka 4 izibuko Ethernet gigabit, 4 RS-232/422/485 izibuko serial, 4 DIs, 4 DOs, kunye 4 USB 3.0 izibuko. Ukongeza, zikwabonelelwa nge-1 DisplayPort output kunye ne-1 HDMI imveliso kunye nesisombululo se-4K. Uqhagamshelo oluthembekileyo kunye nolawulo olufanelekileyo lwamandla lungundoqo kwizicelo zemoto. Iikhompyutha zibonelelwa ngeendawo zokubeka ezi-2 ze-mPCIe ezingenazingcingo kunye neendawo zokubeka iiSIM khadi ezi-4 ukuseka ukuqhagamshelwa kwe-LTE/Wi-Fi okungafunekiyo. Ngokubhekiselele kulawulo lwamandla, ukuqalisa kunye neendlela zokulibazisa ukuvalwa kunceda ukuphepha ukungasebenzi kakuhle kwenkqubo kunye nomonakalo.
Uluhlu lokuKhangela lwepakethi
Ipakethe nganye yomfuziselo wenkqubo esisiseko ithunyelwa ngezi zinto zilandelayo:
- V2403C Series ifakwe kwikhompyuter
- Ikhithi yokufaka udonga
- Ipakethe yetreyi yediski yokugcina
- HDMI isitshixa intambo
- Isikhokelo sokufakela ngokukhawuleza (sishicilelwe)
- Ikhadi lewaranti
Ufakelo lweHardware
Ngaphambili View
Ngasemva View
Imilinganiselo
Izalathisi ze-LED
Le theyibhile ilandelayo ichaza izikhombisi ze-LED ezibekwe ngaphambili nangasemva kwi-V2403C yekhompyuter.
| Igama le-LED | Ubume | Umsebenzi |
| Amandla (kwiqhosha lamandla) |
Luhlaza | Amandla avuliwe |
| Cimile | Akukho galelo lamandla okanye nayiphi na enye impazamo yamandla | |
| I-Ethernet (100 Mbps) (1000 Mbps) |
Luhlaza | I-Steady On: I-100 Mbps Ethernet ikhonkco Ukuqhwanyaza: Ukuhanjiswa kwedatha kuyaqhubeka |
| Lubhelu | I-Steady On: I-1000 Mbps Ethernet ikhonkco Ukuqhwanyaza: Ukuhanjiswa kwedatha kuyaqhubeka | |
| Cimile | Isantya sokuhanjiswa kwedatha kwi-10 Mbps okanye intambo ayixhunyiwe |
| Igama le-LED | Ubume | Umsebenzi |
| Uthotho (TX/RX) | Luhlaza | Tx: Ugqithiso lwedatha luyaqhubeka |
| Lubhelu | Rx: Ukufumana iDatha | |
| Cimile | Akukho msebenzi | |
| Ugcino | Lubhelu | Idatha iyafikelelwa nokuba yimSATA okanye kwiidrive zeSATA |
| Cimile | Idatha ayifikelelwa kwiidrive zokugcina |
Ukufakela i-V2403C
Ikhompyuter yeV2403C iza nezibiyeli ezimbini zodonga. Qhoboshela izibiyeli kwikhompyuter usebenzisa izikrufu ezine kwicala ngalinye. Qinisekisa ukuba izibiyeli zokunyuswa zincanyathiselwe kwikhompyuter ye-V2403C kwicala eliboniswe kulo mfanekiso ulandelayo.
Izikrufu ezisibhozo zeebakaki zokukhwela zibandakanyiwe kwiphakheji yemveliso. Zizikrufu eziqhelekileyo ze-IMS_M3x5L kwaye zifuna i-torque ye-4.5 kgf-cm. Jonga lo mfanekiso ulandelayo ngeenkcukacha.
Sebenzisa izikrufu ezimbini (i-M3 * 5L umgangatho unconywa) kwicala ngalinye ukuze unamathele i-V2403C eludongeni okanye kwikhabhinethi. Iphakheji yemveliso ayibandakanyi izikhonkwane ezine ezifunekayo ekufakeni ikiti yokufaka udonga eludongeni; kufuneka zithengwe ngokwahlukeneyo. Qinisekisa ukuba ikhompyutha ye-V2403C ifakwe kwicala eliboniswe kulo mfanekiso ulandelayo.
Ukuqhagamshela Amandla
Iikhomputha ze-V2403C zibonelelwa nge-3-pin igalelo lokudibanisa amandla kwi-terminal block kwiphaneli yangaphambili. Qhagamshela iingcingo zentambo zamandla kwizihlanganisi uze uqinise iziqhagamshelo. Cofa iqhosha lamandla. I-Power LED (kwiqhosha lamandla) iya kukhanya ukubonisa ukuba amandla anikezelwa kwikhompyuter. Kufuneka kuthathe malunga nemizuzwana engama-30 ukuya kwengama-60 ukuze inkqubo yokusebenza igqibezele inkqubo yokuqalisa.
| Iphini | Ingcaciso |
| 1 | V+ |
| 2 | V- |
| 3 | Umlilo |
Inkcazelo yegalelo lamandla inikwe ngezantsi:
- Ukulinganisa komthombo wamandla we-DC yi-12 V @ 5.83 A, 48 V @ 1.46 A, kwaye ubuncinane be-18 AWG.
Ukukhusela i-surge, qhagamshela i-grounding connector engaphantsi kwesidibaniso samandla kunye nomhlaba (umhlaba) okanye umgangatho wesinyithi. Ukongeza, kukho iswitshi yokulawula ukutshisa kwiphaneli yangaphambili, engasetyenziselwa ukulawula igalelo lamandla. Jonga kwiNcwadana yoMsebenzisi we-Hardware ye-V2403C ngeenkcukacha.
Ukuqhagamshela Iziboniso
I-V2403C inesidibanisi sezibuko esinye esiboniswayo kwiphaneli yangasemva. Ukongeza, enye i-HDMI ujongano nayo inikezelwe kwiphaneli yangasemva.
PHAWULA Ukuze ube nokusasazwa kwevidiyo ethembekileyo, sebenzisa i-premium HDMI-certified cables.
Amazibuko e-USB
I-V2403C iza ne-4 USB 3.0 izibuko kwiphaneli yangaphambili. Amazibuko e-USB angasetyenziselwa ukuqhagamshela kwezinye iiperipherals, ezifana nebhodi yezitshixo, imouse, okanye iiflash drives zokwandisa umthamo wogcino lwenkqubo.
Amazibuko othotho
I-V2403C iza ne-software ezine-selectable RS-232/422/485 izibuko ze-serial kwiphaneli yangasemva. Amazibuko asebenzisa i-DB9 izihlanganisi zamadoda.
Jonga kule theyibhile ilandelayo ukufumana izabelo:
| Iphini | RS-232 | RS-422 | RS-485 (4-wire) | RS-485 (2-wire) |
| 1 | I-DCD | TxDA(-) | TxDA(-) | – |
| 2 | RxD | TxDB(+) | TxDB(+) | – |
| 3 | I-TxD | I-RxDB(+) | I-RxDB(+) | IdathaB(+) |
| 4 | I-DTR | RxDA(-) | RxDA(-) | IdathaA(-) |
| 5 | GND | GND | GND | GND |
| 6 | DSR | – | – | – |
| 7 | RTS | – | – | – |
| 8 | CTS | – | – | – |
Izibuko ze-Ethernet
I-V2403C ine-4 100/1000 Mbps RJ45 Ethernet izibuko kunye nezixhumi ze-RJ45 kwiphaneli yangaphambili. Jonga kule theyibhile ilandelayo ukufumana izabelo:
| Iphini | 10/100 Mbps | 1000 Mbps |
| 1 | ETx+ | I-TRD(0)+ |
| 2 | ETx- | I-TRD(0)- |
| 3 | ERx+ | I-TRD(1)+ |
| 4 | – | I-TRD(2)+ |
| 5 | – | I-TRD(2)- |
| 6 | ERx- | I-TRD(1)- |
| 7 | – | I-TRD(3)+ |
| 8 | – | I-TRD(3)- |
PHAWULA Ngoqhagamshelo oluthembekileyo lwe-Ethernet, sincoma ukuvumela amachweba kumaqondo obushushu aqhelekileyo kwaye uwagcine esebenza kwindawo ephezulu / ephantsi yobushushu.
Iingeniso zeDijithali/Iziphumo zeDijithali
I-V2403C iza namagalelo amane edijithali kunye neziphumo ezine zedijithali kwibhloko ye-terminal. Jonga kula manani alandelayo kwiinkcazo zephini kunye neereyithingi zangoku.
| Iingeniso zeDijithali | Iziphumo zeDijithali |
| Uqhagamshelwano olomileyo Ingqiqo 0: Mfutshane ukuya Umhlaba Ingqiqo 1: Vula Uqhagamshelwano olumanzi (DI ukuya kwiCOM) Ingqiqo 1: 10 ukuya kuma-30 VDC Ingqiqo 0: 0 ukuya ku-3 VDC |
Ukalo lwangoku: 200 mA nge ijelo Umqulutage: 24 ukuya 30 VDC |
Ukufumana iindlela zocingo ezineenkcukacha, jonga kwi-V2403C Hardware User's Manual.
Ukufakela iiDiski zokuGcina
I-V2403C iza kunye neendawo ezimbini zokugcina i-2.5-intshi, evumela abasebenzisi ukuba bafake iidiski ezimbini zokugcina idatha. Landela la manyathelo ukufaka i-hard disk drive.
- Khupha i-tray yediski yokugcina kwiphakheji yemveliso.
- Beka i-disk drive kwi-tray.
- Jika idiski kunye nolungiselelo lwetreyi ngeenxa zonke view icala elingasemva letreyi. Qinisa izikrufu ezine ukuze ukhusele idiski kwitreyi.
- Susa zonke izikrufu kwiphaneli yangasemva yeV2403C yekhompyuter.
- Thatha ikhava yangasemva yekhompyuter kwaye ufumane indawo yokugcina iisokethi zediski. Kukho iziseko ezimbini zedisk tray yokugcina; ungafaka kuyo nayiphi na isokethi.
- Ukubeka i-disk tray yokugcina, faka isiphelo se-tray kufuphi ne-groove kwi-socket.
- Beka i-tray kwi-socket kwaye uqhube phezulu ukwenzela ukuba izixhumi kwi-tray yediski yokugcina kunye ne-socket inokudibaniswa. Gxotha izikrufu ezibini kumzantsi wetreyi.
Ngemiyalelo yokuhlohla ezinye izixhobo zeperipheral okanye iimodyuli ezingenazingcingo, jonga kwi-V2403C Hardware User's Manual.
PHAWULA Le khompyutha yenzelwe ukuba ifakwe kwindawo yofikelelo oluthintelweyo kuphela. Ukongezelela, ngenxa yezizathu zokhuseleko, ikhompyutha kufuneka ifakwe kwaye iphathwe kuphela ngabasebenzi abaqeqeshiweyo nabanamava.
PHAWULA Le khompyutha yenzelwe ukuba ibonelelwe ngezixhobo ezidweliswe kwi-12 ukuya kwi-48 VDC, ubuncinane be-5.83 ukuya ku-1.46 A, kwaye ubuncinane
Tma=70˚C. Ukuba ufuna uncedo ngokuthenga iadaptha yamandla, qhagamshelana neqela lenkxaso yobugcisa beMoxa.
PHAWULA Le khomputha ingasetyenziselwa kwiimoto njengeyunithi yokulawula eqokelela idatha kwii-I / O zezixhobo ezahlukeneyo kwaye idlulisele idatha kumaziko okuthumela izithuthi.
PHAWULA Ukuba usebenzisa i-adapter ye-Class I, i-adapter yentambo yamandla kufuneka idibaniswe kwi-socket outlet kunye nokudibanisa komhlaba okanye intambo yamandla kunye ne-adapter kufuneka ihambelane nokwakhiwa kweKlasi II.
Ukubuyisela ibhetri
I-V2403C iza kunye ne-slot enye yebhetri, efakwe ibhetri ye-lithium ene-3 V / 195 mAh. Ukutshintsha ibhetri, landela la manyathelo angezantsi:
- Ikhava yebhetri ibekwe kwiphaneli yangasemva yekhompyuter.
- Khulula izikrufu ezibini kwikhava yebhetri.
- Susa isiciko; ibhetri incamathele kwikhava.
- Yahlula isinxibelelanisi kwaye ususe izikrufu ezibini kwipleyiti yentsimbi.
- Buyisela ibhetri entsha kwisibambi sebhetri, beka ipleyiti yentsimbi kwibhetri kwaye uqinise izikrufu ezibini ngokuqinileyo.
- Phinda uqhagamshele isinxibelelanisi, beka isibambi sebhetri kwindawo yokubeka, kwaye ukhusele isigqubuthelo sendawo yokubeka ngokuqinisa izikrufu ezibini kwikhava.
PHAWULA
- Qinisekisa ukusebenzisa uhlobo oluchanekileyo lwebhetri. Ibhetri engachanekanga inokubangela umonakalo kwisixokelelwano. Qhagamshelana nabasebenzi benkxaso yobugcisa be-Moxa ukuze bafumane uncedo, ukuba kuyimfuneko.
- Ukunciphisa ingozi yomlilo okanye yokutsha, musa ukuyiqhawula, ukuyityumza okanye ukugqobhoza ibhetri; musa ukulahla emlilweni okanye emanzini, kwaye ungabafutshane unxibelelwano lwangaphandle.
QAPHELA
Ngaphambi kokudibanisa i-V2403C kwigalelo lamandla e-DC, qiniseka ukuba umthombo wamandla we-DC voltage uzinzile.
- I-wiring ye-input terminal block iya kufakwa ngumntu onobuchule.
- Uhlobo locingo: Cu
- Sebenzisa kuphela i-28-18 AWG ubukhulu bocingo kunye nexabiso le-torque ye-0.5 Nm.
- Sebenzisa kuphela umqhubi omnye kwiqelaampindawo ephakathi komthombo wamandla weDC kunye negalelo lamandla.
Ulwazi loQhagamshelwano lweNkxaso yobuGcisa
www.moxa.com/support
Amaxwebhu / Izibonelelo
 |
MOXA V2403C Series Embedded Computers [pdf] Isikhokelo soFakelo V2403C Series Embedded Computers, V2403C Series, Computers embedded |
