Saukewa: V2403C
Jagorar Shigarwa Mai sauri
Cikakkun Kwamfutoci
Shafin 1.2, Mayu 2022
Ƙarsheview
An gina kwamfutoci na V2403C Series a kusa da Intel® Core™ i7/i5/i3 ko Intel® Celeron® babban na'ura mai sarrafawa kuma sun zo da har zuwa 32 GB RAM, ramin mSATA ɗaya, da HDD/SSD guda biyu don faɗaɗa ajiya. Kwamfutocin sun dace da EN 50121-4, E1 mark, da ka'idodin ISO-7637-2 wanda ya sa su dace da layin dogo.
da aikace-aikace a cikin mota.
Kwamfutocin V2403C suna sanye take da wadatattun hanyoyin sadarwa da suka hada da tashoshin 4 gigabit Ethernet, 4 RS-232/422/485 serial ports, 4 DIs, 4 DOs, da 4 USB 3.0 ports. Bugu da ƙari, ana kuma samar da su tare da fitarwa na 1 DisplayPort da 1 HDMI fitarwa tare da ƙudurin 4K. Haɗin dogara da ingantaccen sarrafa wutar lantarki shine maɓalli ga aikace-aikacen cikin-mota. An samar da kwamfutocin tare da ramukan faɗaɗa mara waya ta mPCIe 2 da ramukan katin SIM guda 4 don kafa haɗin haɗin LTE/Wi-Fi mai yawa. Dangane da sarrafa wutar lantarki, hanyoyin farawa da dakatarwa suna taimakawa wajen guje wa lalacewar tsarin aiki.
Kunshin Dubawa
Ana jigilar kowane fakitin ƙirar tsarin asali tare da abubuwa masu zuwa:
- V2403C Series na'ura mai kwakwalwa
- Kayan girke bango
- Kunshin tire na faifai ma'ajiya
- HDMI na USB makullin
- Jagoran shigarwa mai sauri (buga)
- Katin garanti
Shigar Hardware
Gaba View
Na baya View
Girma
LED Manuniya
Tebu mai zuwa yana bayyana ma'aunin LED dake kan gaba da na baya na kwamfutar V2403C.
| LED Name | Matsayi | Aiki |
| Ƙarfi (A kan maɓallin wuta) |
Kore | An kunna wuta |
| Kashe | Babu shigarwar wuta ko wani kuskuren wuta | |
| Ethernet (100 Mbps) (1000 Mbps) |
Kore | A tsaye A kunne: 100 Mbps hanyar haɗin Ethernet Kiftawa: Ana ci gaba da watsa bayanai |
| Yellow | A tsaye A kunne: 1000 Mbps hanyar haɗin Ethernet Kiftawa: Ana ci gaba da watsa bayanai | |
| Kashe | Gudun watsa bayanai a 10 Mbps ko kebul ba a haɗa shi ba |
| LED Name | Matsayi | Aiki |
| Serial (TX/RX) | Kore | Tx: Ana ci gaba da watsa bayanai |
| Yellow | Rx: Karbar Bayanai | |
| Kashe | Babu aiki | |
| Adana | Yellow | Ana samun damar bayanai daga ko dai mSATA ko na'urorin SATA |
| Kashe | Ba a samun isa ga bayanai daga ma'ajin ajiya |
Saukewa: V2403C
Kwamfutar V2403C ta zo da maƙallan hawa bango biyu. Haɗa maƙallan zuwa kwamfutar ta amfani da sukurori huɗu a kowane gefe. Tabbatar cewa an haɗa maƙallan masu hawa zuwa kwamfutar V2403C ta hanyar da aka nuna a cikin adadi mai zuwa.
An haɗa sukurori takwas don maƙallan hawa a cikin fakitin samfur. Suna daidaitattun IMS_M3x5L sukurori kuma suna buƙatar juzu'i na 4.5 kgf-cm. Dubi misalin da ke gaba don cikakkun bayanai.
Yi amfani da sukurori guda biyu (M3*5L ana bada shawarar) kowane gefe don haɗa V2403C zuwa bango ko hukuma. Kunshin samfurin ba ya haɗa da sukurori huɗu da ake buƙata don haɗa kayan hawan bango zuwa bango; suna buƙatar siyan su daban. Tabbatar cewa an shigar da kwamfutar V2403C ta hanyar da aka nuna a cikin adadi mai zuwa.
Haɗa Wutar
Ana ba da kwamfutocin V2403C tare da haɗin shigar da wutar lantarki mai 3-pin a cikin toshe tasha a gaban panel. Haɗa igiyoyin wutar lantarki zuwa masu haɗawa sannan kuma ƙara ƙara masu haɗin. Danna maɓallin wuta. LED Power (a kan maɓallin wuta) zai haskaka don nuna cewa ana ba da wutar lantarki ga kwamfutar. Ya kamata ya ɗauki kusan daƙiƙa 30 zuwa 60 don tsarin aiki don kammala aikin taya.
| Pin | Ma'anarsa |
| 1 | V+ |
| 2 | V- |
| 3 | Kunnawa |
An ba da ƙayyadaddun shigar da wutar lantarki a ƙasa:
- Ma'aunin tushen wutar lantarki na DC shine 12 V @ 5.83 A, 48 V @ 1.46 A, kuma mafi ƙarancin 18 AWG.
Don kariyar karuwa, haɗa mai haɗin ƙasa da ke ƙasa da mai haɗin wuta tare da ƙasa (ƙasa) ko saman ƙarfe. Bugu da ƙari, akwai maɓalli mai sarrafa wuta a gaban panel, wanda za a iya amfani dashi don sarrafa shigar da wutar lantarki. Koma zuwa Littafin Mai Amfani da Hardware V2403C don cikakkun bayanai.
Haɗin Nuni
V2403C yana da mai haɗin tashar tashar nuni guda ɗaya akan ɓangaren baya. Bugu da kari, an kuma bayar da wani haɗin gwiwar HDMI a kan bangon baya.
NOTE Domin samun ingantaccen abin dogaro da yawo na bidiyo, yi amfani da fitattun igiyoyi masu ingancin HDMI.
USB Ports
V2403C ya zo tare da 4 USB 3.0 tashar jiragen ruwa a gaban panel. Ana iya amfani da tashoshin jiragen ruwa na USB don haɗawa da wasu abubuwan da ke kewaye, kamar keyboard, linzamin kwamfuta, ko filasha don faɗaɗa ƙarfin ajiyar tsarin.
Serial Ports
V2403C ya zo tare da RS-232/422/485 serial ports wanda za'a iya zaɓan software guda huɗu akan ɓangaren baya. Tashoshin jiragen ruwa suna amfani da haɗin haɗin maza na DB9.
Koma zuwa tebur mai zuwa don ayyukan fil:
| Pin | Saukewa: RS-232 | Saukewa: RS-422 | RS-485 (4-waya) | RS-485 (2-waya) |
| 1 | D.C.D. | TxDA(-) | TxDA(-) | – |
| 2 | RxD | TxDB(+) | TxDB(+) | – |
| 3 | TXD | RxDB(+) | RxDB(+) | DataB(+) |
| 4 | DTR | RxDA(-) | RxDA(-) | DataA(-) |
| 5 | GND | GND | GND | GND |
| 6 | Farashin DSR | – | – | – |
| 7 | RTS | – | – | – |
| 8 | CTS | – | – | – |
Ethernet Ports
V2403C yana da 4 100/1000 Mbps RJ45 Ethernet tashar jiragen ruwa tare da masu haɗin RJ45 a gaban panel. Koma zuwa tebur mai zuwa don ayyukan fil:
| Pin | 10/100 Mbps | 1000 Mbps |
| 1 | ETx+ | TRD(0)+ |
| 2 | ETx- | TRD (0)- |
| 3 | ERx+ | TRD(1)+ |
| 4 | – | TRD(2)+ |
| 5 | – | TRD (2)- |
| 6 | ERx- | TRD (1)- |
| 7 | – | TRD(3)+ |
| 8 | – | TRD (3)- |
NOTE Don amintaccen haɗin Ethernet, muna ba da shawarar ba da damar tashoshin jiragen ruwa a daidaitattun yanayin zafi da kiyaye su a cikin yanayi mai girma/ƙananan zafi.
Abubuwan Shiga na Dijital/Fitowar Dijital
V2403C yana zuwa tare da abubuwan shigar dijital guda huɗu da abubuwan dijital guda huɗu a cikin toshe tasha. Koma zuwa alkaluman da ke gaba don ma'anar fil da ƙimar halin yanzu.
| Abubuwan Shiga na Dijital | Abubuwan Dijital |
| Busassun Tuntuɓar Hankali 0: Short to Kasa Hankali 1: Buɗe Rigar Tuntuɓa (DI zuwa COM) Hankali 1: 10 zuwa 30 VDC Hankali 0: 0 zuwa 3 VDC |
Ƙididdiga na Yanzu: 200 mA da tashar Voltage: 24 zuwa 30 VDC |
Don cikakkun hanyoyin wayoyi, koma zuwa Littafin Mai amfani na Hardware V2403C.
Sanya Fayilolin Ajiye
V2403C ya zo tare da kwasfan ajiya mai girman inci 2.5, yana ba masu amfani damar shigar da diski biyu don ajiyar bayanai. Bi waɗannan matakan don shigar da rumbun kwamfutarka.
- Cire tiren faifan ajiya daga fakitin samfur.
- Sanya faifan diski akan tire.
- Juya tsarin faifai da tire kusa da su view gefen baya na tire. A ɗaure sukurori huɗu don amintar da faifan zuwa tire.
- Cire duk sukurori akan sashin baya na kwamfutar V2403C.
- Fitar da murfin baya na kwamfutar kuma nemo wurin ajiyar faifan faifan. Akwai kwasfa biyu don tiren faifan ajiya; za ka iya shigar a kan kowane soket.
- Don sanya tiren faifan ajiya, sanya ƙarshen tiren kusa da tsagi akan soket.
- Sanya tiren akan soket ɗin kuma danna sama domin masu haɗawa akan tire ɗin faifai da soket ɗin za a iya haɗa su. A ɗaure sukurori biyu a ƙasan tiren.
Don umarni kan shigar da wasu na'urori na gefe ko na'urorin mara waya, koma zuwa Littafin Mai amfani na Hardware V2403C.
NOTE Ana nufin shigar da wannan kwamfutar a cikin ƙayyadadden wuri kawai. Bugu da kari, saboda dalilai na tsaro, ya kamata a shigar da kwamfutar kuma a sarrafa ta ta kwararrun ƙwararrun ƙwararrun ƙwararru kawai.
NOTE An tsara wannan kwamfutar don samar da kayan aiki da aka jera waɗanda aka ƙididdige su 12 zuwa 48 VDC, mafi ƙarancin 5.83 zuwa 1.46 A, kuma mafi ƙaranci.
Tma=70˚C. Idan kuna buƙatar taimako tare da siyan adaftar wutar lantarki, tuntuɓi ƙungiyar goyan bayan fasaha ta Moxa.
NOTE Ana iya sanya wannan kwamfutar akan abubuwan hawa a matsayin sashin kulawa da ke tattara bayanai daga na'urorin I/O daban-daban da kuma watsa bayanan zuwa cibiyoyin aika abin hawa.
NOTE Idan ana amfani da adaftan Class I, adaftar igiyar wutar yakamata a haɗa ta zuwa madaidaicin soket tare da haɗin ƙasa ko igiyar wutar lantarki da adaftar dole ne su bi tsarin aikin Class II.
Maye gurbin Baturi
V2403C ya zo tare da rami ɗaya don baturi, wanda aka sanya shi tare da baturin lithium tare da ƙayyadaddun 3 V/195 mAh. Don maye gurbin baturin, bi matakan da ke ƙasa:
- Murfin baturi yana kan sashin baya na kwamfutar.
- Buɗe sukurori biyu akan murfin baturin.
- Cire murfin; an haɗa baturin zuwa murfin.
- Ware mai haɗawa kuma cire sukurori biyu akan farantin karfe.
- Sauya sabon baturi a cikin mariƙin baturi, sanya farantin karfe akan baturin kuma ɗaure sukurori biyu sosai.
- Sake haɗa mai haɗawa, sanya mariƙin baturi a cikin ramin, kuma amintaccen murfin ramin ta ɗaure sukullun biyu akan murfin.
NOTE
- Tabbatar amfani da daidaitaccen nau'in baturi. Batirin da ba daidai ba zai iya haifar da lalacewar tsarin. Tuntuɓi ma'aikatan goyan bayan fasaha na Moxa don taimako, idan ya cancanta.
- Don rage haɗarin wuta ko konewa, kar a tarwatsa, murkushe, ko huda baturin; kar a jefar da shi a cikin wuta ko ruwa, kuma kada ku gajarta tuntuɓar waje.
HANKALI
Kafin haɗa V2403C zuwa abubuwan shigar da wutar lantarki na DC, tabbatar da tushen wutar lantarki voltage ya tabbata.
- ƙwararren mutum ne zai shigar da wayoyi don toshewar tashar shigarwa.
- Waya irin: Ku
- Yi amfani da girman waya 28-18 AWG kawai da ƙimar juzu'i na 0.5 Nm.
- Yi amfani da madugu ɗaya kawai a cikin clampmadaidaicin wuri tsakanin tushen wutar lantarki na DC da shigar da wutar lantarki.
Bayanin Tuntuɓar Tallafin Fasaha
www.moxa.com/support
Takardu / Albarkatu
 |
MOXA V2403C Jerin Kwamfutoci Masu Haɗi [pdf] Jagoran Shigarwa Jerin V2403C Kwamfutoci da aka Haɗa, Jerin V2403C, Kwamfutoci masu haɗaka |
