microtech e-LOOP Ukubonwa kweSithuthi esingenazingcingo

Iinkcukacha

• Ukuphindaphinda: 433.39 MHz
• Ukhuseleko: I-128-bit AES encryption
• Uluhlu: ukuya kuthi ga kwi-50 yeemitha
• Ubomi bebhetri: ukuya kwi-10 iminyaka
• Uhlobo Lwebhetri: Lithium ion 3.6V2700 mA x 4

e-LOOP Fitting Imiyalelo

Inyathelo loku-1 - Ukufakwa kweekhowudi kwi-e-LOOP

Ukhetho 1. Uluhlu olufutshane lwekhowudi kunye nemagnethi
Faka amandla i-e-Trans 50, emva koko ucinezele kwaye ukhulule iqhosha le-CODE.
I-LED eluhlaza okwesibhakabhaka kwi-e-Trans 50 iya kukhanya, ngoku beka imagnethi kwi-CODE recess kwi-e-Loop, i-LED ephuzi iya kudanyaza, kunye ne-LED eluhlaza okwesibhakabhaka kwi-e-Trans 50 iya kudanyaza 3 amaxesha. Iinkqubo ngoku zidityanisiwe, kwaye unako ukususa umazibuthe.

Ukhetho 2. Uluhlu olude lwekhowudi ngemagnethi (ukuya kuthi ga kwi50 yeemitha)
Yandisa i-e-Trans 50, emva koko ubeke umazibuthe kwikhowudi yokuphuma kwe-e-Loop, ikhowudi etyheli i-LED iya kudanya kube kanye ngoku isuse umazibuthe kwaye i-LED ize yomelele, ngoku hamba uye kwi-e-Trans 50 kwaye ucinezele. kwaye ukhulule iqhosha le-CODE, i-LED etyheli iya kudanyaza kwaye i-LED eluhlaza okwesibhakabhaka kwi-e-Trans 50 iya kudanyaza amaxesha ama-3, emva kwemizuzwana eyi-15 ikhowudi ye-e-loop LED iya kucima.

Inyathelo lesi-2 – Ukufaka i-e-LOOP
Beka isixhobo se-e-LOOP kwindawo oyifunayo kwaye ukhuseleke emhlabeni usebenzisa i-2 Dyna bolts. Qinisekisa ukuba isixhobo se-e-LOOP sikhuselekile kwaye asinakususwa xa siphathwa.
QAPHELA : Ungaze ulingane kufuphi nomthamo ophezulutagIintambo ze-e, oku kunokuchaphazela isakhono sobhaqo se-e-LOOP.

Inyathelo lesi-3 – Lungisa i-e-LOOP

1. Shenxisa naziphi na izinto zentsimbi kude ne-e-LOOP.
2. Beka umazibuthe kwi-SET iqhosha lokuphumla kwi-e-LOOP de i-LED ebomvu idanyaze kabini, emva koko ususe umazibuthe.
3. I-e-LOOP iyakuthatha malunga nemizuzwana emi-5 ukulinganisa kwaye xa igqityiwe, i-LED ebomvu iya kudanyaza amaxesha ama-3.

PHAWULA: Emva kolungelelwaniso ungafumana isalathiso sempazamo.
Impazamo 1: Uluhlu lwerediyo oluphantsi – I-LED etyheli idanyaza ka-3.
IPHUTHA2: Noradioconnection-YellowandRedLEDflashes3times.

Inkqubo ngoku ilungile.

Ungalinganisi i-e-LOOP
Beka umazibuthe kwi-SET iqhosha lokuphumla de kube i-LED ebomvu idanyaze amaxesha ama-4, i-e-LOOP ngoku ayilingani.

Ukutshintsha Imo

I-e-LOOP isetelwe ukuba iphume kwimowudi ye-EL00C, kwaye isetelwe kwimowudi yobukho ye-EL00C-RAD njengento ehlala ikho. Ukutshintsha imowudi ukusuka kwimowudi yobukho ukuya kwimowudi yokuphuma kwi-EL00C-RAD e-LOOP, sebenzisa imenyu nge-e-TRANS-200 okanye i-Diagnostics remote.
QAPHELA: Musa ukusebenzisa imo yobukho njengomsebenzi wokhuseleko lomntu.

Imo yokutshintsha usebenzisa umazibuthe (EL00C-RAD Kuphela)

1. Beka umazibuthe kwi-MODE recess de i-yellow iqale ukukhanya kwe-LED ebonisa imowudi yobukho, ukutshintsha kwimowudi yokuphuma beka umazibuthe kwi-SET recess, i-LED ebomvu iya kuqalisa ukudanya, ukutshintsha kwimo yokupaka ibeke umazibuthe kwi-MODE recess, i-LED eYellow iza kuqina.
2. Yima imizuzwana emi-5 kude kube yi-flash ye-LED, ngoku singenile kwimenyu yokuqinisekisa, yiya kwiNyathelo lesi-3 okanye ulinde eminye imizuzwana emi-5 de kube zonke izibane ze-LED zamaxesha ama-3 ukuphuma kwimenyu.
3. Imenyu yoQinisekiso
   Nje ukuba kwimenyu yokuqinisekisa i-LED ebomvu iya kuba kungqinisiso oluluqilima lwentsingiselo, ukwenza ukuba imagnethi ibekwe kwindawo yokuphumla, i-LED etyheli kunye ne-LED ebomvu iya kukhanya, isiqinisekiso ngoku senziwe, linda imizuzwana emi-5 kwaye zombini ii-LED ziya kudanyaza 3. amaxesha abonisa imenyu ngoku iphumile.

FCC isilumkiso

Utshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela elinoxanduva lokuthotyelwa lunokuphelisa igunya lomsebenzisi lokusebenzisa isixhobo. Esi sixhobo sivavanyiwe saza safunyanwa sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana neCandelo le-15 leMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa ukusetyenziswa kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswe ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Esi sixhobo sithobela inxalenye ye-15 yeMithetho yeFCC. Ukusebenza kuxhomekeke kwezi meko zimbini zilandelayo: (1) Esi sixhobo asinakubanga luphazamiseko luyingozi, kwaye (2) esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela usetyenziso olungafunekiyo.

microtechdesigns.com.au

Uyilo lweMicrotech enquiries@microtechdesigns.com.au

Amaxwebhu / Izibonelelo

microtech e-LOOP Ukubonwa kweSithuthi esingenazingcingo [pdf] Incwadi yokusebenzisa I-EL00C, 2A8PC-EL00C, i-e-LOOP yokuFumana iSithuthi esingenazingcingo, i-e-LOOP, ukubonwa kwesithuthi esingenazingcingo, ukubonwa kwesithuthi, ukubonwa

Iimbekiselo

• Incwadi yokusebenzisa