M4-E , M4-C
DMX/RDM rhoqo voltagkunye nedekhowuda

Intshayelelo yeMveliso

• Ujongano olusemgangathweni lweDMX/RDM; Seta idilesi ngescreen seLCD kunye namaqhosha;
• Imowudi ye-DMX kunye nemowudi eyenziwe ngokwezifiso inokutshintshwa;
• Iinketho ze-PWM frequency: 300/600/1200/1500/1800/2400/3600/7200/10800/14400/18000Hz (engagqibekanga yi-1800Hz);
• I-16bit (amanqanaba angama-65536)/8bit (amanqanaba angama-256) isikali esingwevu xa sikhethwa;
• Iinketho ezimbini zemowudi yobumnyama: umgangatho kunye nobumnyama obugudileyo;
• Cwangcisa i-1/2/3/4 imveliso yetshaneli ye-DMX (engagqibekanga yi-4 ye-channel output);
• Ukubonelela ngeziphumo zokukhanyisa ezili-10, amanqanaba e-8 esantya semowudi eguqukayo, amanqanaba okukhanya angama-255;
• Cwangcisa ixesha lokuphuma kwesikrini, isikrini se-LCD sihlala sivuliwe, kunye nokucima isikrini emva kwe-30s yokungasebenzi;
• Isiphaluka esifutshane, iqondo lokushisa elingaphezulu, ukhuseleko lwangoku kunye nokubuyisela ngokuzenzekelayo;
• I-M4-C ine-terminal eluhlaza ye-DMX ujongano, i-M4-E ine-RJ-45 DMX ujongano.
• Iprothokholi ye-RDM; Khangela kwaye usete iiparamitha, tshintsha idilesi ye-DMX, kwaye uqaphele izixhobo nge-RDM master;

IiParameters zeMveliso

Umzekelo	M4-E	M4-C
Isiginali yokuNgena	DMX512, RDM	DMX512, RDM
Igalelo Voltage	12-48V	12-48V
Igalelo Voltage	Ubuninzi.8A/CH Ubukhulu.24A(4CH)	Ubuninzi.8A/CH  Ubukhulu.24A(4CH)
Amandla emveliso	0-96W…384W/CH… Max.1152W(4CH)	0-96W…384W/CH… Max.1152W(4CH)
Uluhlu lokufiphala	0-100%	0-100%
Izibuko leSignali ye-DMX	RJ45	Ithemina eluhlaza
ITemp yokuSebenza.	-30°C-55°C	-30°C-55°C
Ubungakanani bepakethi	L175×W46×H30mm	L175×W46×H30mm
Imilinganiselo	L187×W52×H36mm	L187×W52×H36mm
Ubunzima (GW)	325g±5g	325g±5g
Ukhuseleko	Isiphaluka esifutshane, ngaphezu kweqondo lokushisa, ngaphezu kokukhuselwa kwangoku, ukubuyisela ngokuzenzekelayo.

Layisha iiparamitha

I-Frequency yangoku/amandla Voltage	300Hz (F=0)	600Hz (F=1)	1.2kHz (F=2)	1.5kHz (F=3)	1.8kHz (F=4)	2.4kHz (F=5)
12V	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W	6A×4CH/288W
24V	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W	6A×4CH/576W
36V	6A×4CH/864W	6A×4CH/864W	6A×4CH/864W	6A×4CH/864W	6A×4CH/864W	5A×4CH/720W
48V	6A×4CH/1152W	6A×4CH/1152W	6A×4CH/1152W	6A×4CH/1152W	6A×4CH/1152W	5A×4CH/960W
I-Frequency yangoku/amandla Voltage	3.6kHz (F=6)	7.2kHz (F=7)	10.8kHz (F=8)	14.4kHz (F=9)	18kHz (F=A)	/
12V	6A×4CH/288W	4A×4CH/192W	3.5A×4CH/168W	3A×4CH/144W	2.5A×4CH/120W
24V	5A×4CH/480W	3.5A×4CH/336W	3A×4CH/288W	2.5A×4CH/240W	2.5A×4CH/240W
36V	4.5A×4CH/648W	3A×4CH/432W	2.5A×4CH/360W	2.5A×4CH/360W	2A×4CH/288W
48V	4A×4CH/768W	3A×4CH/576W	2.5A×4CH/480W	2.5A×4CH/480W	2A×4CH/384W

Ubungakanani bemveliso

Iyunithi: mm

INkcazelo yeCandelo eliPhambili

• Uqwalaselo lofikelelo: Cofa ixesha elide iqhosha le-M ngaphezulu kwe-2s.
• Lungisa ixabiso: Ukucinezela okufutshane or iqhosha.
• Phuma kwiMenu: Cofa ixesha elide iqhosha lika-M kwii-2s kwakhona ukugcina isicwangciso, uze uphume kwimenyu.
• Cinezela ixesha elide M , Vand iqhosha ngaxeshanye for 2s. Xa isikrini sibonisa i-RES, isetyenziselwe ukusilela kwasefektri.
• Isibonisi sitshixa ngokuzenzekelayo emva kwemizuzwana eyi-15 yokungasebenzi.
• Uqwalaselo lofikelelo: Cofa ixesha elide iqhosha le-M ngaphezulu kwe-2s.
• Lungisa ixabiso: Ukucinezela okufutshane or iqhosha.
• Phuma kwiMenu: Cofa ixesha elide iqhosha lika-M kwii-2s kwakhona ukugcina isicwangciso, uze uphume kwimenyu.
• Cinezela ixesha elide M, kunye ∨ iqhosha ngaxeshanye kwii-2s. Xa isikrini sibonisa i-RES, isetyenziselwe ukusilela kwasefektri.
• Isibonisi sitshixa ngokuzenzekelayo emva kwemizuzwana eyi-15 yokungasebenzi.

I-OLED Display Interface

Imo yedekhowuda yeDMX

Cinezela ixesha elide uM kunye   iqhosha ngaxeshanye. Xa isikrini sibonisa "L-1", singena kwimodi ye-DMX decoder. Cofa ixesha elide iqhosha le-M kwii-2s ukungena kwimenyu.

1. Useto lwedilesi ye-DMXCofa ∧ okanye ∨ iqhosha ukuseta idilesi ye-DMX.
   Uluhlu lwedilesi ye-DMX: 001~512
2. IsigqiboCinezela kancinane iqhosha lika-M ukuze utshintshe imenyu ibe ngu-“r”.
   Cofa ∧ okanye ∨ iqhosha ukukhetha isisombululo kwaye ixabiso lesithathu kwisikrini liya kubonisa 1 okanye 2.
   Ukhetho: r-1 (8bit)
   r-2 (16bit)
3. Ukuhamba rhoqo kwePWMCinezela kancinane iqhosha lika-M ukutshintshela imenyu ku-“F”.
   Cofa ∧ okanye ∨ iqhosha ukukhetha ifrekhwenzi ye-PWM kwaye ixabiso lesithathu kwisikrini liya kubonisa H okanye L.

   Ukhetho:	F-4 (1800Hz)	F-0 (300Hz)	F-1 (600Hz)	F-2 (1200Hz)
   	F- 3 (1500Hz)	F-5(2400Hz)	F-6(3600Hz)	F-7(7200Hz)
   	F- 8 (10800Hz)	F-9 (14400Hz)	I-F-A (18000Hz)

4. Imowudi yokufiphalaCinezela kancinane iqhosha lika-M ukutshintshela imenyu ku-“d”.
   Cinezela ∧ okanye ∨ iqhosha ukukhetha indlela yobumnyama kwaye ixabiso lesithathu kwisikrini liya kubonisa u-1 okanye u-2.
   Ukhetho: d-1 (Ubumnyama obugudileyo)
   d-2 (ubumnyama obuqhelekileyo)
5. Imijelo ye-DMXCinezela kancinane iqhosha lika-M ukutshintshela imenyu ku-“C”.
   Cofa ∧ okanye ∨ iqhosha ukukhetha amajelo kwaye ixabiso lesithathu kwisikrini liya kubonisa 1, 2, 3 okanye 4.
   Ukhetho: C-4 (4 imveliso yesitishi ithatha iidilesi ezi-4 zeDMX ezihambelanayo)
   I-C-1 (imveliso yesitishi esi-4 ithatha idilesi ye-DMX 1)
   I-C-2 (i-1 kunye ne-3 ye-channel output ithatha idilesi ye-DMX 1, i-2 kunye ne-4 ye-channel output ithatha idilesi ye-DMX 2)
   I-C-3 (i-1 ye-channel output ithatha idilesi ye-DMX 1, i-2 ye-channel output ithatha
   Idilesi ye-DMX 2, 3 kunye ne-4 ye-channel output ithatha idilesi ye-DMX 3)
6. Isikrini siphelileCinezela kancinane iqhosha lika-M ukuze utshintshe imenyu ibe ngu-“n”.
   Cofa ∧ okanye ∨ iqhosha ukukhetha ixesha lokuphuma kwesikrini kwaye ixabiso lesithathu kwisikrini liya kubonisa 1 okanye 2.
   Ukhetho: n-1 (Isikrini sihlala sivuliwe)
   n-2 (Isikrini siyacima emva kwemizuzwana engama-30 yokungasebenzi)

Imowudi eyenzelwe wena

Cinezela ixesha elide uM kunye iqhosha ngaxeshanye. Xa isikrini sibonisa "L-2", singena kwi. Cofa ixesha elide iqhosha le-M kwii-2s ukungena kwimenyu. Imowudi eyenzelwe wena

1. Iziphumo zokukhanyisaCinezela kancinane iqhosha lika-M ukutshintshela imenyu ku-“E”.
   Cinezela or iqhosha lokukhetha isiphumo sokukhanyisa kwaye ixabiso lesithathu kwisikrini liya kubonisa 1, 2, 3, 4, 5, 6, 7, 8, 9 okanye A.
   Ukhetho:

   E-1 (akukho siphumo sokukhanyisa)	E-6 (Emfusa)
   E-2 (Bomvu)	E-7 (Cyan)
   E-3 (Green)	E-8 (Mhlophe)
   E-4 (Blue)	E-9 (7-umbala ukutsiba)
   E-5 (Yellow)	I-E-A (i-7-color-gradient)

2. Isantya sokutshintsha umbalaCinezela kancinane iqhosha lika-M ukuze utshintshe imenyu ibe ngu-“S”.
   Cinezela okanye ∨ iqhosha lokukhetha isantya kwaye ixabiso lesithathu kwisikrini liya kubonisa 1, 2, 3, 4, 5, 6, 7 okanye 8.
   Ukuhlala kukho: S-5
   Ukhetho: S-1 / S-2 ······S-7 / S-8
3. UkuqaqambaCinezela kancinane iqhosha lika-M ukuze utshintshe imenyu ibe ngu-“B”.
   Cofa ∧ okanye ∨ iqhosha ukukhetha inqanaba lokukhanya kwaye ixabiso lesithathu kwisikrini liya kubonisa 1, 2, 3, 4, 5, 6, 7 okanye 8.
   I-B00-BFF, amanqanaba angama-255, ubuninzi obungagqibekanga be-255
   Ukhetho:
   B00 / B01 ······ BFF
4. Isikrini siphelileCinezela kancinane iqhosha lika-M ukuze utshintshe imenyu ibe ngu-“n”.
   Cofa ∧ okanye ∨ iqhosha ukukhetha ixesha lokuphuma kwesikrini kwaye ixabiso lesithathu kwisikrini liya kubonisa 1 okanye 2.
   Ukhetho: n-1 (Isikrini sihlala sivuliwe)
   n-2 (Isikrini siyacima emva kwemizuzwana engama-30 yokungasebenzi)

I-M4-E ye-Wiring Diagram

* Xa ngaphezulu kwe-32 iidekhowuda zeDMX ziqhagamshelwe, umqondiso weDMX ampiilifi ziyafuneka kunye nomqondiso ampukunyuswa akufuneki kube ngaphezu kwamaxesha ama-5 ngokuqhubekayo. Ukuba ufuna ukuguqula izicwangciso zeparameter ezidityanisiweyo ze-DMX/RDM decoders ezidlula i-32, unokongeza isignali ye-1 RDM. ampisihlanguli. Okanye unokongeza i-1-5 isignali ye-DMX ampizihlanguli emva kokugqiba izicwangciso zeparameter.
* Ukuba i-recoil effect yenzeka ngenxa yomgca wesignali omde okanye iingcingo ezikumgangatho ophantsi, nceda uzame ukuqhagamshela i-0.25W 90-120Ω i-terminal resistor ekupheleni komgca ngamnye.* Xa ngaphezulu kwe-32 iidekhowuda zeDMX ziqhagamshelwe, umqondiso weDMX ampiilifi ziyafuneka kunye nomqondiso ampukunyuswa akufuneki kube ngaphezu kwamaxesha ama-5 ngokuqhubekayo. Ukuba ufuna ukuguqula izicwangciso zeparameter ezidityanisiweyo ze-DMX/RDM decoders ezidlula i-32, unokongeza isignali ye-1 RDM. ampisihlanguli. Okanye unokongeza i-1-5 isignali ye-DMX ampizihlanguli emva kokugqiba izicwangciso zeparameter.
* Ukuba i-recoil effect yenzeka ngenxa yomgca wesignali omde okanye iingcingo ezikumgangatho ophantsi, nceda uzame ukuqhagamshela i-0.25W 90-120Ω i-terminal resistor ekupheleni komgca ngamnye.

Ukuqwalaselwa

• Le mveliso kufuneka ifakwe kwaye ilungiswe yingcali eqeqeshiweyo.
• Iimveliso ze-LTECH kwaye azikhuseli umbane ezingenamanzi (iimodeli ezikhethekileyo ngaphandle). Nceda uphephe ilanga nemvula. Xa zifakwe ngaphandle, nceda uqinisekise ukuba zifakwe kwindawo yokukhusela amanzi okanye kwindawo exhotywe ngezixhobo zokukhusela umbane.
• Ukutshatyalaliswa kobushushu obuhle kuya kwandisa ubomi bemveliso. Nceda ufake imveliso kwindawo enomoya olungileyo.
• Xa ufaka le mveliso, nceda ugweme ukusondela kwindawo enkulu yezinto zentsimbi okanye ukupakisha ukuthintela ukuphazamiseka komqondiso.
• Nceda ugcine imveliso kude nentsimi yamagnetic, indawo yoxinzelelo oluphezulu okanye indawo apho umbane uyenzeka khona.
• Nceda ujonge ukuba ingaba voltagI-e esetyenzisiweyo iyahambelana neemfuno zepharamitha yemveliso.
• Ngaphambi kokuba unike amandla kwimveliso, nceda uqinisekise ukuba yonke i-wiring ichanekile kwimeko yoxhulumaniso olungalunganga olunokubangela isiphaluka esifutshane kwaye sonakalise amacandelo, okanye siqalise ingozi.
• Ukuba kukho impazamo, nceda ungazami ukulungisa imveliso wedwa. Ukuba unombuzo, nceda uqhagamshelane nomthengisi.

* Le ncwadana ixhomekeke kutshintsho ngaphandle kwesaziso esongezelelweyo. Imisebenzi yemveliso ixhomekeke kwimpahla. Nceda uzive ukhululekile ukuqhagamshelana nabasasazi bethu abasemthethweni ukuba unombuzo.

Isivumelwano sewaranti

Amaxesha ewaranti ukusuka kumhla wokuhanjiswa : iminyaka emi-5.
Ukulungiswa kwamahhala okanye iinkonzo ezitshintshiweyo zeengxaki ezisemgangathweni zinikezelwa ngexesha lewaranti.
Ukukhutshwa kwewaranti ngezantsi:

• Ngaphandle kwamaxesha ewaranti.
• Nawuphi na umonakalo owenziweyo obangelwa ngumthamo ophezulutage, umthwalo omninzi, okanye imisebenzi engafanelekanga.
• Akukho nasiphi na isivumelwano esisayinwe yi-LTECH.
• Iileyibhile zewaranti kunye neebhakhowudi zonakele.
• Umonakalo obangelwa ziintlekele zendalo kunye ne-force majeure.
• Iimveliso ezinomonakalo omkhulu womzimba.

1. Ukulungiswa okanye ukutshintshwa kunikezelwe kuphela kweyeza kubathengi. I-LTECH ayinaluxanduva lwawo nawuphi na umonakalo onokwenzeka okanye osisiphumo ngaphandle kokuba kusemthethweni.
2. I-LTECH inelungelo lokulungisa okanye ukulungelelanisa imiqathango yesi siqinisekiso, kwaye ukukhululwa ngendlela ebhaliweyo kuya kuphumelela.

www.ltech.cn
Ixesha loHlaziyo: 08/11/2023_A2

Amaxwebhu / Izibonelelo

LTECH M4-E DMX/RDM Constant Voltage Idekhowuda [pdf] Incwadi yokusebenzisa M4-E DMX RDM Constant Voltage iDekhowuda, M4-E, DMX RDM Constant Voltage Idikhowuda, i-RDM Constant Voltage Idikhowuda, Constant Voltage Idikhowuda, Voltage Idikhowuda, iDekhowuda

Iimbekiselo

• Incwadi yokusebenzisa