LTECH M4-E DMX/RDM Constant Voltage Decoder User Manual

M4-E , M4-C
DMX/RDM kamehla voltage decoder

Litaba pata

1 Kenyelletso ea Sehlahisoa

2 Lihlahisoa tsa lihlahisoa

3 Laola liparamente

4 Boholo ba Sehlahisoa

5 Tlhaloso ea Karolo e ka Sehloohong

6 OLED Display Interface

7 Setšoantšo sa M4-E Wiring

8 Tumellano ea Waranti

9 Litokomane / Lisebelisoa

9.1 Litšupiso

Kenyelletso ea Sehlahisoa

Mekhoa e tloaelehileng ea DMX/RDM; Beha aterese ka skrine ea LCD le likonopo;
Mokhoa oa DMX le mokhoa o hlophisitsoeng o ka fetoloa;

PWM likhetho tsa maqhubu: 300/600/1200/1500/1800/2400/3600/7200/10800/14400/18000Hz (kameho ke 1800Hz);
16bit (maemo a 65536)/8bit (maemo a 256) ka boikhethelo;

Likhetho tse peli tsa dimming mode: ho fifala ho tloaelehileng le ho boreleli;
Beha tlhahiso ea 1/2/3/4 ea mocha oa DMX (ka ho feletseng ke tlhahiso ea mocha oa 4);

Fana ka litlamorao tse 10 tsa mabone, maemo a 8 a lebelo la mokhoa o matla, maemo a khanya a 255;
Beha nako ea ho tima skrineng, skrine ea LCD e lula e bulehile, 'me skrine e tima ka mor'a lilemo tse 30 tsa ho se sebetse;

Potoloho e khuts'oane, mocheso o feteletseng, ts'ireletso ea morao-rao le ho hlaphoheloa ha koloi;
M4-C e na le li-interface tsa DMX tse tala, M4-E e na le li-interfaces tsa RJ-45 DMX.

RDM protocol; Batla le ho seta liparamente, fetola aterese ea DMX, 'me u lemohe lisebelisoa ka master ea RDM;

Lihlahisoa tsa lihlahisoa

Mohlala	M4-E	M4-C
Pontšo ea ho kenya	DMX512, RDM	DMX512, RDM
Keletso Voltage	12-48V	12-48V
Keletso Voltage	Max.8A/CH Max.24A(4CH)	Max.8A/CH Max.24A(4CH)
Matla a Output	0-96W…384W/CH… Max.1152W(4CH)	0-96W…384W/CH… Max.1152W(4CH)
Range Range	0-100%	0-100%
DMX Signal Port	RJ45	Botala bo botala
Mocheso o sebetsang.	-30°C-55°C	-30°C-55°C
Boholo ba Sephutheloana	L175×W46×H30mm	L175×W46×H30mm
Litekanyo	L187×W52×H36mm	L187×W52×H36mm
Boima (GW)	325g±5g	325g±5g
Tshireletso	Potoloho e khuts'oane, ho feta mocheso, ho feta ts'ireletso ea hajoale, ho hlaphoheloa ha koloi.

Laola liparamente

Frequency Current/matla Moqtage	300Hz (F=0)	600Hz (F=1)	1.2kHz (F=2)	1.5kHz (F=3)	1.8kHz (F=4)	2.4kHz (F=5)
12V	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W 8A×3CH/288W	6A×4CH/288W	6A×4CH/288W
24V	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W 8A×3CH/576W	6A×4CH/576W	6A×4CH/576W
36V	6A×4CH/864W	6A×4CH/864W	6A×4CH/864W	6A×4CH/864W	6A×4CH/864W	5A×4CH/720W
48V	6A×4CH/1152W	6A×4CH/1152W	6A×4CH/1152W	6A×4CH/1152W	6A×4CH/1152W	5A×4CH/960W
Frequency Current/matla Moqtage	3.6kHz (F=6)	7.2kHz (F=7)	10.8kHz (F=8)	14.4kHz (F=9)	18kHz (F=A)	/
12V	6A×4CH/288W	4A×4CH/192W	3.5A×4CH/168W	3A×4CH/144W	2.5A×4CH/120W
24V	5A×4CH/480W	3.5A×4CH/336W	3A×4CH/288W	2.5A×4CH/240W	2.5A×4CH/240W
36V	4.5A×4CH/648W	3A×4CH/432W	2.5A×4CH/360W	2.5A×4CH/360W	2A×4CH/288W
48V	4A×4CH/768W	3A×4CH/576W	2.5A×4CH/480W	2.5A×4CH/480W	2A×4CH/384W

Boholo ba Sehlahisoa

Yuniti: mm

Tlhaloso ea Karolo e ka Sehloohong

Tlhophiso ea phihlello: Tobetsa konopo ea M nako e telele ho feta 2s.

Fetola Boleng: Tobetsa nakoana or konopo.
Tsoa ho Menu: Tobetsa nako e telele konopo ea M bakeng sa 2s hape ho boloka litlhophiso, ebe o tsoa ho menu.

Tobetsa nako e telele M , Vand konopo ka nako e le 'ngoe bakeng sa 2s. Ha skrini se bonts'a RES, se se se hlophisitsoe hape hore se be maemong a feme.
Pontšo e ikhitla ka bo eona kamora metsotsoana e 15 ea ho se sebetse.

Tlhophiso ea phihlello: Tobetsa konopo ea M nako e telele ho feta 2s.
Fetola Boleng: Tobetsa nakoana or konopo.

Tsoa ho Menu: Tobetsa nako e telele konopo ea M bakeng sa 2s hape ho boloka litlhophiso, ebe o tsoa ho menu.
Tobetsa nako e telele M, le ∨ konopo ka nako e le 'ngoe bakeng sa 2s. Ha skrini se bonts'a RES, se se se hlophisitsoe hape hore se be maemong a feme.

Pontšo e ikhitla ka bo eona kamora metsotsoana e 15 ea ho se sebetse.

OLED Display Interface

Mokhoa oa "decoder" oa DMX

Tobetsa nako e telele M le konopo ka nako e le nngwe. Ha skrini se hlahisa “L-1”, se kena mokhoeng oa decoder oa DMX. Tobetsa nako e telele konopo ea M bakeng sa 2s ho kenya menu.

Litlhophiso tsa liaterese tsa DMXTobetsa ∧ kapa ∨ konopo ho seta aterese ea DMX.
Sebaka sa liaterese tsa DMX: 001~512

QetoTobetsa konopo ea M hakhutšoanyane ho fetolela menyu ho "r".
Tobetsa ∧ kapa ∨ konopo ho khetha qeto 'me boleng ba boraro skrineng bo tla hlahisa 1 kapa 2.
Khetho: r-1 (8bit)
r-2 (16bit)
Khafetsa PWMTobetsa konopo ea M hakhutšoanyane ho fetolela menyu ho "F".
Tobetsa ∧ kapa ∨ konopo ho khetha maqhubu a PWM 'me boleng ba boraro skrineng bo tla hlahisa H kapa L.

Likhetho: F-4 (1800Hz) F-0 (300Hz) F-1 (600Hz) F-2 (1200Hz)

F- 3 (1500Hz) F-5(2400Hz) F-6(3600Hz) F-7(7200Hz)

F- 8 (10800Hz) F-9 (14400Hz) FA (18000Hz)

Mokhoa oa ho fifalaTobetsa konopo ea M hakhutšoanyane ho fetolela menyu ho "d".
Tobetsa ∧ kapa ∨ konopo ho khetha mokhoa oa ho fifala 'me boleng ba boraro skrineng bo tla hlahisa 1 kapa 2.
Khetho: d-1 (Dimming e boreleli)
d-2 (Dimming e tlwaelehileng)
Dikanale tsa DMXTobetsa konopo ea M ho fetolela menyu ho "C".
Tobetsa ∧ kapa ∨ konopo ho khetha likanale 'me boleng ba boraro skrineng bo tla hlahisa 1, 2, 3 kapa 4.
Likhetho: C-4 (4 channel output e nka liaterese tse 4 tsa DMX)
C-1 (4 channel output e nka aterese ea DMX 1)
C-2 (sehlahisoa sa 1 le sa 3 se na le aterese ea DMX 1, 2 le 4 ea channel e nka aterese ea DMX 2)
C-3 (sehlahisoa se le seng se nka aterese ea DMX 1, tlhahiso ea 1 ea mocha e lula
Aterese ea 2, 3 le 4 ea DMX e na le aterese ea 3 ea DMX)

Nako ea skrine e felileTobetsa konopo ea M hakhutšoanyane ho fetolela menyu ho "n".
Tobetsa ∧ kapa ∨ konopo ho khetha nako ea ho tima skrineng 'me boleng ba boraro bo hlahang skrineng bo tla hlahisa 1 kapa 2.
Likhetho: n-1 (Screen e lula e bulehile)
n-2 (Screen e tima ka mor'a metsotsoana e 30 ea ho se sebetse)

Mokhoa o ikhethileng

Tobetsa nako e telele M le konopo ka nako e le nngwe. Ha skrineng se hlahisa "L-2", e kena . Tobetsa nako e telele konopo ea M bakeng sa 2s ho kenya menu. Mokhoa o ikhethileng

Liphello tsa maboneTobetsa konopo ea M ho fetola menu ho "E".
Tobetsa or konopo ea ho khetha phello ea mabone 'me boleng ba boraro skrineng bo tla hlahisa 1, 2, 3, 4, 5, 6, 7, 8, 9 kapa A.
Likhetho:

E-1 (ha ho na phello ea mabone) E-6 (Pherese)

E-2 (Khubelu) E-7 (Cyan)

E-3 (Botala) E-8 (Tšweu)

E-4 (Boputsoa) E-9 (ho tlola ka mebala e 7)

E-5 (Tšehla) EA (7-color gradient)
Lebelo le fetolang mmalaTobetsa konopo ea M hakhutšoanyane ho fetolela menyu ho "S".
Tobetsa kapa ∨ konopo ho khetha lebelo mme boleng ba boraro skrineng bo tla hlahisa 1, 2, 3, 4, 5, 6, 7 kapa 8.
Kamehla: S-5
Khetho: S-1 / S-2 ······S-7 / S-8
KhanyaTobetsa konopo ea M hakhutšoanyane ho fetolela menyu ho "B".
Tobetsa ∧ kapa ∨ konopo ho khetha boemo ba khanya 'me boleng ba boraro skrineng bo tla hlahisa 1, 2, 3, 4, 5, 6, 7 kapa 8.
B00-BFF, maemo a 255, boholo bo sa feleng ke 255
Likhetho:
B00 / B01 ······ BFF
Nako ea skrine e felileTobetsa konopo ea M hakhutšoanyane ho fetolela menyu ho "n".
Tobetsa ∧ kapa ∨ konopo ho khetha nako ea ho tima skrineng 'me boleng ba boraro bo hlahang skrineng bo tla hlahisa 1 kapa 2.
Likhetho: n-1 (Screen e lula e bulehile)
n-2 (Screen e tima ka mor'a metsotsoana e 30 ea ho se sebetse)

Setšoantšo sa M4-E Wiring

* Ha li-decoder tse fetang 32 tsa DMX li hokahantsoe, lets'oao la DMX amplifiers lia hlokahala le pontšo amplification ha ea lokela ho feta makhetlo a 5 ka ho tsoelang pele. Haeba o hloka ho fetola litlhophiso tsa paramente ea li-decoder tsa DMX/RDM tse hokahantsoeng tse fetang 32, o ka eketsa lets'oao le le leng la RDM. ampmoqhobi. Kapa o ka eketsa lets'oao la 1-5 DMX ampLifiers ka mor'a ho qeta litlhophiso tsa parameter.
* Haeba phello ea ho khutlisa e etsahala ka lebaka la mohala o molelele oa mats'oao kapa lithapo tsa boleng bo tlase, ka kopo leka ho hokela sehanyetsi sa 0.25W 90-120Ω qetellong ea mohala ka mong.* Ha li-decoder tse fetang 32 tsa DMX li hokahantsoe, lets'oao la DMX amplifiers lia hlokahala le pontšo amplification ha ea lokela ho feta makhetlo a 5 ka ho tsoelang pele. Haeba o hloka ho fetola litlhophiso tsa paramente ea li-decoder tsa DMX/RDM tse hokahantsoeng tse fetang 32, o ka eketsa lets'oao le le leng la RDM. ampmoqhobi. Kapa o ka eketsa lets'oao la 1-5 DMX ampLifiers ka mor'a ho qeta litlhophiso tsa parameter.
* Haeba phello ea ho khutlisa e etsahala ka lebaka la mohala o molelele oa mats'oao kapa lithapo tsa boleng bo tlase, ka kopo leka ho hokela sehanyetsi sa 0.25W 90-120Ω qetellong ea mohala ka mong.

Tlhokomelo

Sehlahisoa sena se tlameha ho kenngoa le ho lokisoa ke setsebi se tšoanelehang.
Lihlahisoa tsa LTECH ha li kenele lehalima ha li kenelle metsi (mefuta e khethehileng ntle le eona). Ka kopo qoba letsatsi le pula. Ha li kentsoe ka ntle, ka kopo etsa bonnete ba hore li kentsoe ka har'a sebaka se thibelang metsi kapa sebakeng se nang le lisebelisoa tse sireletsang lehalima.
Ho senya mocheso o motle ho tla lelefatsa bophelo ba sehlahisoa. Ka kopo, kenya sehlahisoa sebakeng se nang le moea o motle.
Ha o kenya sehlahisoa sena, ka kopo qoba ho ba haufi le sebaka se seholo sa lisebelisoa tsa tšepe kapa ho li bokella ho thibela ho kena-kenana le matšoao.
Ka kopo, boloka sehlahisoa se le hole le matla a khoheli a matla, sebaka sa khatello e phahameng kapa sebaka seo ho leng bonolo ho hlaha lehalima.
Ka kopo, hlahloba hore na mosebetsi oa voltage sebelisitsoeng e lumellana le litlhoko tsa parameter ea sehlahisoa.
Pele o kenya matla sehlahisoa, ka kopo etsa bonnete ba hore lithapo tsohle li nepahetse haeba ho ka ba le khokahanyo e fosahetseng e ka bakang potoloho e khuts'oane mme ea senya likarolo, kapa ea baka kotsi.
Haeba ho na le phoso, ka kopo u se ke ua leka ho lokisa sehlahisoa u le mong. Haeba u na le potso, ka kopo ikopanye le mofani oa thepa.

* Bukana ena e ka fetoha ntle le tsebiso e 'ngoe. Mesebetsi ea lihlahisoa e itšetlehile ka thepa. Ka kopo ikutloe u lokolohile ho ikopanya le barekisi ba rona ba semmuso haeba u na le potso.

Tumellano ea Waranti

Linako tsa tiisetso ho tloha ka letsatsi la ho fana : lilemo tse 5.
Litšebeletso tsa mahala tsa tokiso kapa tse ncha bakeng sa mathata a boleng li fanoa ka nako ea tiisetso.
Likhetho tsa Warranty ka tlase:

Ho feta linako tsa waranti.

Tšenyo efe kapa efe ea maiketsetso e bakoang ke matla a phahamengtage, ho tlala, kapa ts'ebetso e sa lokelang.
Ha ho na konteraka e saennoeng ke LTECH.
Lileibole tsa tiisetso le libarcode li senyehile.

Tšenyo e bakoang ke likoluoa tsa tlhaho le force majeure.
Lihlahisoa tse nang le tšenyo e matla ea 'mele.

Ho lokisa kapa ho nkela sebaka ke eona feela pheko bakeng sa bareki. LTECH ha e ikarabelle bakeng sa tšenyo efe kapa efe ea tšohanyetso kapa e bakiloeng ntle le haeba e le ka har'a molao.

LTECH e na le tokelo ea ho fetola kapa ho lokisa lipehelo tsa tiisetso ena, 'me tokollo e ngotsoeng e tla ba teng.

www.ltech.cn
Nako ea Nchafatso: 08/11/2023_A2

Litokomane / Lisebelisoa

LTECH M4-E DMX/RDM Constant Voltage Decoder [pdf] Bukana ea Mosebelisi
M4-E DMX RDM Constant Voltage Decoder, M4-E, DMX RDM Constant Voltage Decoder, RDM Constant Voltage Decoder, Constant Voltage Decoder, Moqtage Decoder, Decoder

Litšupiso

Bukana ea Mosebelisi