LINQ8ACM Series Network Access Power Controller, 8 PTC Umyalelo Manual

Ngaphezuluview

I-Altronix LINQ8ACM(CB) zi-UL ezidweliswe kabini abalawuli bamandla okufikelela kwinethiwekhi ezinokuthi zifakwe kwi-Altronix eludongeni kunye ne-rack mount ezivalekileyo ukuququzelela ukusasazwa kolawulo lokufikelela. Uyilo lwegalelo loMlawuli wokuFikelela kabini luvumela amandla ukuba alawulwe ukusuka kwenye (1) okanye ezimbini (2) ezizimeleyo zevolthi ephantsi.tage 12 okanye 24 VDC Altronix unikezelo amandla ukuya ezisibhozo (8) ngokuzimeleyo fuse elawulwa (LINQ8ACM) okanye PTC (LINQ8ACMCB) iziphumo ezikhuselweyo. Iziphumo zivulwe sisinki yomqokeleli evulekileyo, evulwe ngokuqhelekileyo (NO), ivalwe ngesiqhelo (NC) igalelo letrigger eyomileyo, okanye imveliso emanzi evela kwiNkqubo yoLawulo loFikelelo, isiFundi seKhadi, iPhedi yezitshixo, iqhosha lokutyhala, iPIR, njalo njalo. LINQ8ACM(CB) iya amandla omzila ukuya kwiintlobo ngeentlobo zezixhobo zolawulo lwe-hardware ezibandakanya ukutshixa kweMag, Ukubetha koMbane, abaPhathi beMagnetic Door, njl njl. Iziphumo ziya kusebenza kuzo zombini iindlela zokuFail-Safe kunye/okanye uFail-Secure. Ujongano lweFACP lunika amandla uPhumo oluNgxamisekileyo, ukuJonga iAlarm, okanye ingasetyenziselwa ukuqalisa ezinye izixhobo ezincedisayo. Isixhobo sokuqhawula isivusi somlilo sikhethwa ngokwaso nasiphi na okanye zonke ezisibhozo (8) iziphumo. Izihlanganisi umhlakulo ikuvumela ukuba daisy chain amandla kwiimodyuli ezininzi LINQ8ACM(CB). Eli nqaku likuvumela ukuba usasaze amandla ngaphezulu kwemveliso yeenkqubo ezinkulu. Eyakhelwe ngaphakathi LINQTM Network Power Management iququzelela ukubeka iliso, ukunika ingxelo kunye nolawulo lwamandla / ukuxilongwa.

Iinkcukacha

Uluhlu lweearhente:

• UL 294 7th Edition: IiYunithi zeNkqubo yoLawulo lokuFikelela.*
• UL 294 Ushicilelo lwesi-7 Amanqanaba okuSebenza: Uhlaselo: Mna, Unyamezelo: IV, Ukhuseleko lomgca: Mna, Amandla okuma: I.

Igalelo Voltage Ukhetho:

• Igalelo elinye:
  Igalelo1: 12 okanye 24 VDC ukusuka eFlow series unikezelo lwamandla.
• Ukhetho lokuFaka kabini:
  • Igalelo 1: 12 okanye 24 VDC ukusuka eFlow series unikezelo lwamandla.
  • Igalelo 2: a – 12 okanye 24 VDC ukusuka eFlow series unikezelo lwamandla.
  • 5 okanye 12 VDC ukusuka VR6 voltagUmlawuli.
• UKhetho lokuFaka kabini: i-2 kunye ne-24 VDC esuka kwi-Tango12B PoE Driven Power Supply.
• Igalelo langoku:
  LINQ8ACM: 20A iyonke
  LINQ8ACMCB: 16A iyonke.
• Ukusetyenziswa kwamandla angaphakathi: 300mA @24VDC okanye 600mA@ 12VDC
• Ezisibhozo (8) amagalelo e-trigger:
  • Ngesiqhelo ukuvula (NO) amagalelo (abafowunelwa owomileyo).
  • Ngokuqhelekileyo kuvalwe (NC) amagalelo (abafowunelwa abomileyo).
  • Vula amagalelo edinki yomqokeleli.
  • Igalelo elimanzi (5VDC - 24VDC) kunye ne-resistor ye-10K.
  • Nayiphi na indibaniselwano engasentla.

Iziphumo:

• I-LINQ8ACM: Iziphumo ezikhuselweyo ze-Fuse zilinganiswe @ 2.5A ngemveliso nganye, engenamandla alinganiselweyo. Isiphumo esipheleleyo 20A max.
  I-LINQ8ACMCB: Iziphumo ezikhuselweyo ze-PTC zilinganiswe @ 2A ngemveliso nganye, i-Class 2 amandla alinganiselwe. Isiphumo esipheleleyo 16A max.
  Musa ukudlula ireyithingi zobonelelo lwamandla lomntu ngamnye.
  Jonga iNgeniso/Imveliso Voltage Iireyithingi, p. 6.
  Jonga iMphumo ePhezulu ye-Altronix Power Supplies.
• Iziphumo ezisibhozo (8) ezikhethiweyo ezilawulwa ngokuzimeleyo (jonga ngezantsi ukulinganisa):
  • Ukungaphumeleli-uKhuseleko kunye/okanye ukungaphumeleli-Khusela iziphumo zamandla.
  • Imveliso yamandla ancedisayo (engatshintshiyo).
  • Nayiphi na indibaniselwano engasentla.
• Iimveliso zomntu ngamnye zinokusetwa OFF indawo yonikezelo lwenkonzo (i-output jumper isetelwe kwindawo ephakathi).
• Nayiphi na kwezisibhozo (8) imveliso yamandla ekhuselweyo ye- fuse/PTC ikhethwa ukulandela amandla Igalelo 1 okanye iNgeniso 2.
  Iziphumo voltagi-e yemveliso nganye iyafana nomthamo wokufakatage yegalelo elikhethiweyo.
  Jonga iNgeniso/Imveliso Voltage Iireyithingi, p. 6.
• Uxinzelelo loxinzelelo.

Ukalisho lweFuse:

• I-LINQ8ACM: Iifusi zegalelo eziphambili zilinganiswe nge-15A/32V nganye. Iifusi zemveliso zilinganiswe 3A/32V.
• I-LINQ8ACMCB: Igalelo eliphambili lePTCs zilinganiswe nge-9A nganye. Ii-PTC zemveliso zithelekelelwa kwi-2A.

Iimpawu ezicwangcisekileyo:

• Zisibhozo (8) iziphumo ezicwangcisekileyo:
  • Ukungaphumeleli-ukhuseleko, ukungaphumeleli-ukhuseleko okanye iziphumo ezincedisayo.
  • Igalelo lilawulwa okanye lilawulwa ngesandla ngesoftware.
  • Iphezulu (ngaphezulu) kwaye iphantsi (phantsi) umthamotage kunye nokujongwa kwangoku ngemveliso.
  • Iziphumo ezininzi zinokucwangciswa ukuba zivuswe ngegalelo elinye.
  • Ugcino lwebhetri ngokwemveliso.
• Ezisibhozo (8) amagalelo esixhobo sokuxhokonxa:
  • Ngokuqhelekileyo ivuliwe (HAYI).
  • Ngokuqhelekileyo i-colsed (NC).
  • Vula amagalelo edinki yomqokeleli.
  • Igalelo elimanzi (5VDC - 24VDC) kunye ne-10k resistor.
  • Nayiphi na indibaniselwano engasentla.
• Ii-ID zezibuko ezicwangcisekileyo.
• Jonga unikezelo lwamandla (ies) igalelo lomthamotage kunye nemida echanekileyo (phezulu / ephantsi).
• Igalelo kunye nemveliso ulungelelwaniso lwangoku.
• Iziganeko zamaxesha ezicwangcisekileyo.
• Amanqanaba omsebenzisi anokucwangciswa.
• Yenza okanye uvale izivuseleli ngokohlobo.
• Ukulibaziseka kwengxelo yesivuseleli esicwangcisekileyo

NONE

• Ukuqhawulwa kweAlam yoMlilo (Ayisebenziyo, ibamba okanye ayibambeki) ikhethwa ngokukodwa kuzo naziphi na okanye kuzo zonke ezisibhozo (8) iziphumo.
  Iinketho zongeniso zeAlarm yoMlilo:
  • Ukulawulwa Ngokuqhelekileyo Vula [NO] okanye Ngokuqhelekileyo kuvalwe [NC] igalelo elomileyo loqhagamshelwano.
  • Igalelo lokubuyisela umva kwe-polarity ukusuka kwisekethe yomqondiso we-FACP.
• Igalelo le-FACP i-WET inikwe i-5-30VDC 7mA.
• I-FACP igalelo elomileyo i-EOL idinga i-10K ekupheleni kwe-resistor yomgca.
• I-FACP ye-relay ye-relay ye-relay [NC]: Okanye i-Dry 1A / 28VDC, i-0.6 Power Factor okanye i-10K yokuchasana ne- [EOL JMP] eqinile.

Iimpawu ze-LED:

• I-LED ye-AC eluhlaza: ibonisa imeko yengxaki ye-AC.
• I-LED ye-BAT eluhlaza: ibonisa imeko yengxaki yebhetri.
• I-LED ye-FACP eluhlaza: ibonisa ukuqhawuka kwe-FACP kuqalisiwe.
• I-Flashing Blue Heartbeat LED: ibonisa uqhagamshelwano lwenethiwekhi.
• Umntu ngamnye OUT1 – OUT8 Ii-LED eziBomvu: bonisa ukuba iziphumo ziyavuswa.
• Umntu ngamnye Voltage LEDs: bonisa 12VDC (Green) okanye 24VDC (Red).

Okusingqongileyo:

• Ubushushu bokusebenza: 0ºC ukuya kuma-49ºC ambient.
• Ukufuma: 20 ukuya 93%, non-condensing.

Oomatshini:

• Imilinganiselo yeBhodi (W x L x H eqikelelweyo): 8 "x 4.5" x 1.25" (203.2mm x 114.3mm x 31.8mm).
• Ubunzima bemveliso (malunga.): 0.7 lb (0.32 kg).
• Ubunzima bokuthumela (malunga.): 0.95 lb (0.43 kg).

Imiyalelo yokuFakela

Iindlela zocingo ziya kuhambelana neKhowudi yoMbane yeSizwe NFPA 70/NFPA 72/ ANSI / iKhowudi yoMbane yaseKhanada / CAN/ULC-S524/ULC-S527/ULC-S537, kunye nazo zonke iikhowudi zendawo kunye namagunya anegunya. Imveliso yenzelwe ukusetyenziswa okomileyo kwangaphakathi kuphela.

Jonga kuMyalelo woFakelo lwe-Sub-Assembly yokunyuswa kweRev. MS020119. 

1. Mount LINQ8ACM(CB) kwindawo oyifunayo/indawo ebiyelweyo. Xa unyusela i-LINQ8ACM(CB) yodwa, sebenzisa
   ababhinqileyo/ababhinqileyo kwizithuba (ezibonelelweyo). Xa unyuswa nge-VR6 voltage umlawuli okanye Tango1B PoE
   Ubonelelo lwaMandla oluqhutywayo, sebenzisa izikhewu zabasetyhini/amazi (ezibonelelweyo) phakathi kweLINQ8ACM(CB) kunye neVR6 okanye iTango1B
   (Umfanekiso 3, iphe. 7, umzobo 4, iphe. 8).
2. Qinisekisa ukuba zonke izinto zokutsiba eziphumayo [OUT1] – [OUT8] zibekwe kwindawo OFF (embindini).
3. Qhagamshela umthamo ophantsitage Ubonelelo lwamandla e-DC kwiitheminali eziphawulwe [+ PWR1 –], [+ PWR2 –].
   Phawula: Ngofakelo lweVR6 kunye neTango1B nceda ubhekisele ku-pg. 7, 8.
4. Seta imveliso nganye [OUT1] – [OUT8] kumbane wendlela ukusuka kwi-Power Supply 1 okanye 2 (Fig. 1).
   
   Phawula: Umlinganiselo wemveliso voltage phambi kokudibanisa izixhobo.
   Oku kunceda ukuphepha umonakalo onokwenzeka.
5. Cima umbane ophambili phambi kokudibanisa izixhobo.
6. Ukhetho Lwemveliso (ukhetho lwemveliso yenkqubo ngesoftware yeLINQ):
   I-LINQ8ACM(CB) iya kubonelela ukuya kuthi ga kwisibhozo (8) kwiziphumo zamandla atshintshiweyo kunye nesibhozo (8) kunye neziphumo zamandla ezincedisayo ezingatshintshiyo.
   Iziphumo zaMandla ezitshintshiweyo:
   Qhagamshela igalelo elikhabayo (–) lesixhobo esiqhutywayo kwitheminali ephawulweyo [COM].
   • Kumsebenzi oFail-Safe, qhagamshela igalelo elilungileyo (+) lesixhobo esinikwa amandla kwitheminali ephawulwe [NC].
   • Kumsebenzi oFail-Secure, qhagamshela igalelo elilungileyo (+) lesixhobo esinikwa amandla kwi-terminal ephawulwe [HAYI].
     IziPhumo zaMandla aNcedisayo (azitshintshelwanga):
     Qhagamshela igalelo elivumayo (+) lesixhobo esenziwa amandla kwitheminali ephawulwe [C] kunye nekhabathi (–) yesixhobo esenziwa amandla kwitheminali ephawulwe [COM]. Imveliso ingasetyenziselwa ukunika amandla kubafundi bekhadi, iiphedi zamaqhosha njl.
7. Vula amandla aphambili emva kokuba zonke izixhobo zidityanisiwe.
8. Iinketho Zokufaka Igalelo (inkqubo ibangela iinketho zongeniso nge-LINQ isoftwe):
   Phawula: Ukuba ukuqhawulwa kweAlarm yoMlilo akusetyenziswanga, qhagamshela isixhasi se-10 kOhm kwiitheminali eziphawulwe [GND kunye ne-EOL].
   Igalelo:
   Qhagamshela ulawulo lokufikelela okomileyo (NC/NO) igalelo kwiitheminali eziphawulwe [+ INP1 –] ukuya [+ INP8 –].
   Vula iNgeniso yeSinki yoMqokeleli:
   Qhagamshela igalelo lokucwila elivulekileyo lomqokeleli kwitheminali ephawulwe [+ INP1 –] ku [+ INP8 –].
   Imanzi (Voltage) Uqwalaselo Lwegalelo:
   Ukuqwalasela ngokucophelela i-polarity, qhagamshela i-voltage igalelo iingcingo zokuqalisa kunye ezinikiweyo 10K resistor ukuya
   iitheminali eziphawulwe [+ INP1 –] ukuya [+ INP8 –].
9. Iinketho zoNxibelelwano lweAlarm yoMlilo (iinketho zojongano lwesivusi somlilo ngenkqubo yeLINQ):
   Eqhele ukuvalwa [NC], idla ngokuvula igalelo [NO] okanye igalelo lokubuyisela umva polarity ukusuka kwisekethe yomqondiso weFACP
   izakuvusa iziphumo ezikhethiweyo.
   Ngesiqhelo Vula igalelo:
   Xhuma i-FACP yakho kunye ne-10K yesixhasi ngokunxuseneyo kwiitheminali eziphawulwe [GND] kunye ne [EOL].
   Igalelo Elivalwayo:
   Xhuma i-FACP yakho kunye ne-10K resistor kuthotho kwiitheminali eziphawulwe [GND] kunye ne [EOL].
10. FACP Dry NC imveliso:
    Qhagamshela isixhobo esinqwenelekayo ukuba sivuswe sisiphumo soqhagamshelwano esomileyo seyunithi kwiitheminali eziphawulwe [NC] kunye no [C].
    Xa [EOL JMP] ikwindawo ye-DIS, isiphumo singu-0 Ohm ukuxhathisa kwimeko eqhelekileyo.
    Xa [EOL JMP] ikwindawo ye-EN, ukuxhathisa kwe-10k kuya kudluliselwa kwisixhobo esilandelayo xa ikwimeko eqhelekileyo.

Ukuchongwa kwetheminali/isiqhagamshelo

Umzobo 2 - LINQ8ACM

Itheminali/Legend		Inkcazo
A	- PWR1 +	Ukufakwa kombane wokuqala weDC.
B	- PWR2 +	Okwesibini DC igalelo lombane.
C	Imveliso ye-LED	Isiphumo somntu ngamnyetagii-LEDs. 12VDC (Green) okanye 24VDC (Red).
D	Umtsi wokuPhuma	Isiphumo somntu ngamnyetage ukukhetha jumper.
E	COM -	Iplagi eqhelekileyo ye-Negative ye-H yezihlanganisi umhlakulo.
F	Imveliso 1 nge Iziphumo 8 HAYI, C, NC, COM	Iziphumo ezisibhozo (8) ezikhethiweyo ezilawulwa ngokuzimeleyo [Fail-Safe (NC) okanye Fail-Secure (NO)].
G	-F, + F	Iitheminali zoNgeniso zeSekethe ye-FACP. Udidi lwe-2 lunamandla alinganiselwe.
H	-R, + R	Iitheminali zokuBuyisa iSekethe ye-FACP. Udidi lwe-2 lunamandla alinganiselwe.
I	GND, EOL	I-EOL eLawulweyo ye-FACP yokufaka iitheminali ze-polarity ukubuyisela umva umsebenzi we-FACP. Udidi lwe-2 lunamandla alinganiselwe.
J	GND, AST	I-FACP yojongano lojongano okanye non-latching. AKUKHO igalelo elomileyo. Udidi lwe-2 lunamandla alinganiselwe. Ukuba mfutshane kuba non-latching FACP interface okanye Latch FACP reset.
K	C, NC	FACP Dry NC imveliso rated 1A/28VDC @ 0.6 Power Factor. Udidi lwe-2 lunamandla alinganiselwe. Nge-EOL JMP echanekileyo, iya kubonelela nge-10k ukuxhathisa kwimeko eqhelekileyo.
L	+ PS1 —	Uqhagamshelo [+ BAT —] iitheminali zoBonelelo loMbane 1.
M	+ BAT -	Uqhagamshelo ku-stand-by batten/(ies) kwiSibonelelo soMbane 1.
N	+ PS2 —	Uqhagamshelo [+ BAT —] iitheminali zoBonelelo loMbane 2.
O	+ BAT -	Uqhagamshelo kwibhetri emileyo yoBonelelo ngoMbane 2.
P	+ INP1 — nge + INP8 —	Ezisibhozo (8) zilawulwa ngokuzimeleyo Ngokuqhelekileyo ziVulile (NO), Ngokuqhelekileyo zivaliwe (NC), iSinki yoMqokeleli ovulekileyo okanye i-Wet Input Triggers.
Q	Tamper	Tamper Tshintsha Ungeniso.
R	AC / NC, C	Qhagamshela izixhobo zokwazisa ezifanelekileyo kwiitheminali ukuze uxele ukusilela kwe-AC.
S	BAT / NC, C	Qhagamshela izixhobo zokwazisa ezifanelekileyo kwiitheminali ukuze uchaze ukusilela kwebhetri.
T		Igcinelwe ukusetyenziswa kwixesha elizayo.
U	8-Pin Isiqhagamshelo	Ngoqhagamshelo kwiVR6 okanye kwiTangos B.
V	i-USB	Uqhagamshelo lweLaptop yenza i-LINO8ACM(CB) ukusetwa kokuqala kunye nenkqubo.
W	RJ45	I-Ethernet: Uqhagamshelo lwe-LAN okanye ilaptop yenza i-LINO8ACM (CB) inkqubo kunye nokubeka iliso kwimeko.
X	PWR1+, PWR2+	Iiplagi ezintle [+] zokudibanisa umhlakulo.
Y	2-Pin Isiqhagamshelo	Uqhagamshelo kwiitheminali ze [AC Fail] kubonelelo lombane.
Z	EOL Jumper	Ibandakanya i-10 kOhm End-of-Line resistor.

Uxilongo lwe-LED

I-LED	ON	CIMA
I-LED 1- LED 8 (Bomvu)	Ugqithiso lwemveliso lucinywe amandla.	Ugqithiso lwemveliso lunikwe amandla.
I-FACP	Igalelo le-FACP licushiwe (imeko ye-alarm).	FACP eqhelekileyo (imeko engeyo-alarm).
Imveliso eluhlaza 1-8	12VDC	–
Isiphumo esiBomvu 1-8	24VDC	–
AC	Ukusilela kwe-AC	I-AC eqhelekileyo
BAT	Ibhetri Yokusilela	Ibhetri yesiqhelo

Igalelo/Imveliso Voltage Iireyithingi

Igalelo Voltage kunye noMthombo	Imveliso Voltage Ukuthelekisa
5VDC (ukusuka VR6 umlawuli)	5VDC
I-12V (ukusuka kumlawuli we-VR6)	12VDC
I-12VDC (ukusuka kunikezelo lwamandla lwangaphandle)	11.7-12VDC
I-24VDC (ukusuka kunikezelo lwamandla lwangaphandle)	23.7-24VDC

Esona siphumo siphezulu se-Altronix Power Supplies

Unikezelo lwaMandla oLudwe lwe-UL okanye olwaMkelweyo	Imveliso Voltage Ukucwangcisa	Max. Imveliso yangoku
eFlow4NB	12VDC okanye 24VDC	4A
eFlow6NB	12VDC okanye 24VDC	6A
eFlow102NB	12VDC	10A
eFlow104NB	24VDC	10A
VR6	5VDC okanye 12VDC	6A
Tango1B	I-12VDC kunye ne-24VDC	12VDC @ 5.4A kunye/okanye 24VDC @ 2.7A. 65W iyonke.

UmqulutagUmlawuli

Ngaphezuluview:

VR6 voltagUmlawuli we-e uguqula igalelo le-24VDC kwi-5VDC elawulwayo okanye i-12VDC ephumayo. Yenzelwe ngokukodwa ukusebenza kunye ne-LINQ8ACM(CB) ngokuvumela ukunyuswa koMlawuli waMandla wokuFikelela ngokuthe ngqo phezulu kwe-VR6 ukugcina indawo evaliweyo kunye nokwenza lula ukudibanisa. Jonga kwiSikhokelo sokuFakelo seVR6 uMfundisi 050517.

Iinkcukacha:

Igalelo laMandla / Imveliso:

• Igalelo: 24VDC @ 1.75A – Imveliso: 5VDC @ 6A.
• Igalelo: 24VDC @ 3.5A – Imveliso: 12VDC @ 6A.

Isiphumo

• I-5VDC okanye i-12VDC ephumayo elawulwayo.
• Umlinganiselo wemveliso 6A max.
• Uxinzelelo loxinzelelo.

Iimpawu ze-LED:

• Igalelo kunye nemveliso ye-LEDs.

Umbane:

• Ubushushu bokusebenza: 0ºC ukuya kuma-49ºC ambient.
• Ukufuma: 20 ukuya 93%, non-condensing.

Oomatshini:

• Ubunzima bemveliso (malunga.): 0.4 lb (0.18 kg).
• Ubunzima bokuthumela (malunga.): 0.5 lb (0.23 kg).

Ukuqhagamshela i-LINQ8ACM(CB) kwi-VR6:

1. Qinisa izikhewu zamadoda/amazi (ezibonelelweyo) kwiipem ezihambelana nepateni yomngxuma yeVR6 kwindawo enqwenelekayo/indawo ebiyelweyo. Sebenzisa i-metal spacer kumngxuma wokunyuka kunye nepateni yeenkwenkwezi (Umfanekiso 3a, iphe. 7).
2. Iplagi-in indoda 8-pin isinxibelelanisi kwi female 8-pin isangqa kwibhodi VR6 (Fig. 3, pg. 7).
3. Gxininisa i-spacers yabasetyhini / yabasetyhini kwi-spacers yamadoda / yabasetyhini (Umfanekiso 3, iphe. 7). Sebenzisa izikhewu zentsimbi phezu komngxuma onyukayo kunye nepateni yeenkwenkwezi (Umfanekiso 3a, iphe. 7).
4. Lungelelanisa i-8-pin yesiqhagamshelanisi esiyindoda kunye nesixhobo sabasetyhini se-LINQ8ACM/LINQ8ACMCB, emva koko uqhoboshele ibhodi kwizikhewu usebenzisa i-5/16” yezikrufu zentloko yepani (Umfanekiso 3, iphe. 7).
5. Xhuma i-24VDC unikezelo lwamandla kwi-terminal ephawulwe [+ PWR1 -] ye-LINQ8ACM/LINQ8ACMCB (Umfanekiso 3, iphe. 7).
6. Khetha umthamo wemvelisotage 5VDC okanye 12VDC usebenzisa iswitshi [S1] kwiVR6.
7. Gqibezela amanyathelo 4-10 (pgs. 3-4).

Tango1B – PoE Driven Power Supply

Altronix Tango1B Voltage I-Regulator iguqula igalelo le-IEEE802.3bt le-PoE libe yi-24VDC elawulwayo kunye/okanye i-12VDC ephumayo ukuya kuma-65W. Iphelisa imfuno yomthamo ophezulutage unikezelo lwamandla ngaphakathi kwendawo ebiyelweyo. I-Tango 8-pin ikhonkco ivumela ukupakishwa kunye ne-LINQ8ACM (CB), ukugcina indawo enqabileyo enqabileyo. Jonga kwiSikhokelo soFakelo lweTango1B uMfundisi TANGO-071119.

Iinkcukacha:

Ungeniso lwe-Ethernet:

• 802.3bt PoE ukuya ku-90W okanye 802.3at ukuya kuthi ga kwi-30W okanye 802.3af ukuya kuthi ga kwi-15W.

IsiPhumo saMandla (xa usebenzisa i-802.3bt 90W):

• I-12VDC ukuya kwi-5.4A (65W) kunye / okanye i-24VDC ukuya kwi-2.7A (65W). Isiphumo esidityanisiweyo singadluli kwi-65W.
• Xa utshaja iibhetri: I-12VDC ukuya kwi-4.6A (55W) kunye / okanye i-24VDC ukuya kwi-2.3A (55W) Imveliso edibeneyo ingadluli kwi-55W.

I-Ethernet Output:

• Ukudlula kwi-Ethernet Port (idatha kuphela).
• 100/1G

Ukongamela:

• Ilahleko yeNgeniso yePoE.
• Ulongamelo lwebhetri.

Iimpawu ezibonakalayo:

• Igalelo libonisa umthamo wegalelotage ikhona.
• Ubume bebhetri bubonisa imeko yengxaki yebhetri.
• Isalathisi seKlasi yePoE.
• Ukungaphumeleli kwePoE okanye ukusilela kwe-BAT.

Iimpawu ezongezelelweyo:

• Isiphaluka esifutshane kunye nokhuseleko lomthwalo ogqithisiweyo.
  Imilinganiselo yeBhodi (malunga ne-L x W x H): 7.625” x 4.125” x 1.25” (193.7mm x 104.8mm x 32.0mm)

Iqhagamshela i-LINQ8ACM(CB) kwi-Tango1B:

Xa i-LINQ8ACM(CB) inikwe amandla kwi-Tango1B, Amandla aphezulu angama-90W ukusuka kwisixhobo sokufumana amandla e-PoE, igalelo elikhulu lomthamotage ukuya eTango1B yi-60V. Isixhobo sokunika amandla (PSE) siya kuthobela uMgangatho weSixhobo soLwazi lweTekhnoloji – uKhuseleko – iSahlulo 1: IiMfuno ngokuBanzi, UL 60950-1, kunye/okanye uMgangatho weZixhobo zoLwazi/iVidiyo, uLwazi kunye noNxibelelwano lweTekhnoloji – iCandelo 1: uKhuseleko. Iimfuno, UL 62368-1, isixhobo senzelwe ukuthobela la macandelo alandelayo eKhowudi yoMbane yeSizwe, ANSI/NFPA 70:

• Apho umbane obonelelwe ngentambo yonxibelelwano ungaphantsi okanye ulingana neewatts ezingama-60: Inqaku le-725.121, iMithombo yaMandla yeKlasi 2 kunye neeSekethe zeKlasi yesi-3;
• Apho umbane obonelelwe ngentambo yonxibelelwano mkhulu kuneewatts ezingama-60: iSiqendu 725.144, Amandla oThutho kunye neDatha.

Izixhobo zokukhangela amandla azenzelwanga ukuba zibe kwindawo engaphandle Indawo ye-PSE ephakathi okanye i-injector yamandla. I-PSE ephakathi okanye i-injector yamandla inokufumaneka nakweyiphi na indawo ngaphakathi kwetshaneli yecabling echaziweyo echaziweyo ethobela uMgangatho we-Balanced Twisted-Pair Telecommunications Cabling kunye ne-Components, ANSI/ TIA-568-C.2, phakathi kokutshintsha kwenethiwekhi kunye nesixhobo esinamandla (PD). Iimfuno zekhebhuli yodidi 5E lolona didi lusezantsi lokusebenza olucetyiswayo kwaye kufuneka luboniswe kwimiyalelo yokufakela imveliso. Udidi lokusebenza olusetyenzisiweyo kufuneka luhambelane nesantya sothumelo esifunekayo kwindawo yofakelo. Ubuncinci begeyiji yomqhubi ovunyelweyo ukudibanisa phakathi kwe-PSE okanye i-injector yamandla kunye nePD iya kuba yi-26 AWG (0.13 mm2) kwiintambo zokubopha; I-24 AWG (0.21 mm) yentambo ethe tye okanye yokunyuka. Ubungakanani begeyiji yocingo buya kuboniswa kwimiyalelo yokufakela. Izixhobo zokukhangela amandla ziya kuba yi-UL 294 kunye ne-IEEE 802.3BT ehambelanayo.

1. Qinisa izijukujuku zamadoda/amazi (ezibonelelweyo) kwiipem ezihambelana nepateni yomngxuma weTango1B kwindawo enqwenelekayo/indawo ebiyelweyo (umzobo 4, iphe. 9).
2. Iplagi yokudibanisa indoda ene-8-pin ukuya kwisixhobo sokwamkela esinamaphini ayi-8 kwibhodi yeTango1B.
3. Qinisa izikhewu zabasetyhini/abasetyhini. Sebenzisa izikhewu zentsimbi phezu kwemingxuma yokukhwela ngepateni yeenkwenkwezi (Umfanekiso 4a, iphe. 9).
4. Lungelelanisa i-8-pin yesidibanisi sendoda kunye nesixhobo sabasetyhini se-LINQ8ACM(CB), emva koko ukhwele.
5. Qhagamshela unikezelo lwamandla lwe-24VDC kwitheminali ephawulwe [+ PWR1 –] ye-LINQ8ACM(CB). Ngaloo ndlela i-Input 1 ye-LINQ8ACM(CB) yi-24VDC ukusuka kubonelelo lwamandla kunye ne-Input 2 igqitywe ngoseto lwe-Tango1B (12VDC okanye 12VDC).
6. Gqibezela amanyathelo 4-10 (iphe. 3-4)

Idayagram yosetyenziso oluqhelekileyo:

Amanqaku abalulekileyo anxulumene nekhompyuter edibeneyo kunye nezixhobo zonxibelelwano

Izixhobo zokusetyenzwa kwedatha kunye nesixhobo seofisi/izixhobo zoshishino ezisetyenziswa njengezixhobo zekhompyutha ziya kuthobela uMgangatho weZixhobo zobuChwepheshe boLwazi – uKhuseleko – iSahlulo soku-1: IiMfuno ngokuBanzi, UL 60950-1, okanye uMgangatho weZixhobo zoLwazi/Ividiyo, iNgcaciso noNxibelelwano lobuChwepheshe – Icandelo 1: IiMfuno zoKhuseleko, UL 62368-1.

Ukhuseleko lwexeshana lomgca lwesixhobo sekhompyutha kufuneka luhambelane noMgangatho weVoltage Surge Suppressors, UL 1449, kunye nomlinganiselo ophawulweyo ophezulu we-330V. Kwakhona ukhuseleko lwethutyana lomgca kufuneka luhambelane noMgangatho wabaKhuseli boNxibelelwano lweDatha kunye neeSekethe zeAlarm zoMlilo, UL 497b, ezinomlinganiselo ophawulweyo omkhulu we-50V.

Iisekethe zonxibelelwano kunye namacandelo othungelwano aqhagamshelwe kuthungelwano lonxibelelwano luya kukhuselwa ngabakhuseli besibini kwiisekethe zonxibelelwano. Aba bakhuseli baya kuthobela uMgangatho wabaKhuseli beSekondari kwiiSekethe zoNxibelelwano, UL 497A. Aba bakhuseli baya kusetyenziswa kuphela kwicala elikhuselweyo lothungelwano lonxibelelwano. Ukongeza kubonelelo lombane oluphambili kunye nombane wesibini ekufuneka unikezelwe kwisikhululo solawulo esiphakathi, inkqubo iya kubonelelwa ngobonelelo lwamandla olungaphazamisekiyo (UPS) olunomthamo owaneleyo wokusebenzisa izixhobo zekhompyuter ubuncinci bemizuzu eli-15. . Ukuba kufuneka ngaphezu kwemizuzu eli-15 kunikezelo lwamandla lwesibini ukunika amandla egalelo le-UPS, i-UPS iya kuba nako ukunika amandla igalelo ubuncinane kweso sixa sexesha. I-UPS iyakuthobela uMgangatho weSixhobo soBonelelo saMandla esingaphazamisekiyo, UL 1778, okanye uMgangatho weZixhobo zokuSawula eziKhusela uMlilo, UL 1481.

Umiselo lweNethiwekhi:

Nceda qiniseka ukuba undwendwela i-altronix.com kwi-firmware yamva nje kunye nemiyalelo yokufaka.

Inkqubo yeNethiwekhi nge-Altronix Dashboard yoQhagamshelo lwe-USB:

Uqhagamshelo lwe-USB kwi-LINQ8ACM(CB) lusetyenziselwa ukuseta iiparamitha zenethiwekhi. Xa uqhagamshelwe kwiPC ngentambo ye-USB i-LINQ8ACM(CB) iya kufumana amandla kwizibuko le-USB elivumela inkqubo yenethiwekhi ye-LINQ8ACM(CB) phambi kokuba iqhagamshelwe kunikezelo lombane.

1. Faka isoftware enikezelwe ngeLINQ8ACM(CB) kwiPC esetyenziselwa inkqubo.
   PHAWULA: Le software kufuneka ifakwe kuzo zonke iikhompyuter eziya kuba nokufikelela kwi-LINQ8ACM(CB).
2. Qhagamshela intambo ye-USB enikezelweyo kwizibuko le-USB kwi-LINQ8ACM(CB) kunye nekhompyuter.
3. Cofa kabini kwiDashboard icon kwidesktop yekhompyuter kwaye uvule iDashboard. Ngenisa igama lomsebenzisi: admin kunye nePassword: admin ukufikelela kwideshibhodi.
4. Cofa kwiqhosha eliphawulwe Ukuseta iNethiwekhi ye-USB kwicala eliphezulu ledeshibhodi. Oku kuya kuvula i-USB Network Setup screen. Kwesi sikrini idilesi ye-MAC ye-LINQ8ACM(CB) imodyuli iya kufunyanwa kunye neSetingi zeNethiwekhi.

Iisetingi zeNethiwekhi:

Kwinkalo yeNdlela yedilesi ye-IP khetha indlela apho idilesi ye-IP ye-LINQ8ACM(CB) iya kufumaneka: “STATIC” okanye “DHCP”, emva koko ulandele amanyathelo afanelekileyo (qhakamshelana nomlawuli wothungelwano ukumisela ukuba yeyiphi indlela eza kusetyenziswa) .

NONE

• Idilesi ye-IP: Ngenisa idilesi ye-IP eyabelwe i-LINQ8ACM(CB) ngumlawuli wothungelwano.
• IMaski engaphantsi: Ngena iSubnet yenethiwekhi.
• Isango: Ngena isango le-TCP/IP lendawo yofikelelo lwenethiwekhi (i-router) esetyenziswayo.
  PHAWULA: Ubumbeko besango luyafuneka ukuze ufumane ngokufanelekileyo ii-imeyile ezivela kwisixhobo.
• I-Port Inbound (HTTP): Faka inombolo yezibuko eyabelwe imodyuli ye-LINQ8ACM (CB) ngumlawuli wothungelwano ukuvumela ukufikelela okude kunye nokubeka iliso.
• Cofa iqhosha elinombhalo Ngenisa Izicwangciso zeNethiwekhi. Ibhokisi yencoko yababini iya kubonisa "Useto olutsha lwenethiwekhi luya kusebenza emva kokuba umncedisi eqalwe ngokutsha". Cofa u-Kulungile

I-DHCP

• Emva kokukhetha i-DHCP kwindawo yedilesi ye-IP cofa iqhosha elibhalwe Thumela Iisetingi zeNethiwekhi. Ibhokisi yencoko yababini iya kubonisa "Useto olutsha lwenethiwekhi luya kusebenza emva kokuba umncedisi eqalwe ngokutsha". Cofa u-Kulungile. Okulandelayo, cofa kwiqhosha elibhalwe Reboot Server. Emva kokuqalisa kwakhona i-LINQ8ACM(CB) iya kusekwa kwimo ye-DHCP. Idilesi ye-IP iya kwabelwa ngumzila xa LINQ8ACM(CB) iqhagamshelwe kwinethiwekhi. Kuyacetyiswa ukuba ube nedilesi ye-IP eyabelweyo igcinelwe ukuqinisekisa ukufikelela okuqhubekayo (bona umlawuli wenethiwekhi).
• I-Subnet Mask: Xa usebenza kwi-DHCP, i-router iya kunika ixabiso le-subnet mask.
• Isango: Ngena isango le-TCP/IP lendawo yofikelelo lwenethiwekhi (i-router) esetyenziswayo.
• I-HTTP Port: Faka inombolo ye-HTTP yezibuko eyabelwe imodyuli ye-LINQ8ACM (CB) ngumlawuli wothungelwano ukuvumela ukufikelela okude kunye nokubeka iliso. Ucwangciso lwezibuko lwangaphakathi olungagqibekanga ngama-80. I-HTTP ayintsonkothanga kwaye ayikhuselekanga. Nangona i-HTTP ingasetyenziselwa ukufikelela kude, iyacetyiswa ukuba isetyenziswe ngoqhagamshelo lwe-LAN.

Khusela uSeto lweNethiwekhi (HTTPS):

Ukuze usete i-HTTPS yoQhagamshelwano oluKhuselekileyo lweNethiwekhi, iSatifikethi esiKhokelelekileyo kunye nesitshixo kufuneka sisetyenziswe. Izatifikethi kunye neSitshixo kufuneka zibe kwifomathi ".PEM". Izatifikethi zakho kufuneka zisetyenziselwe iinjongo zovavanyo kuphela njengoko kungekho ngqinisiso lokwenene lwenziwayo. Kwimowudi yokuZiqinisekisa, umdibaniso useza kuthetha ukuba awukhuselekanga.

Usifaka njani iSatifikethi kunye nesitshixo sokuSeta i-HTTPS:

1. Vula iThebhu ebhalwe uKhuseleko.
2. Khetha iTabhu Ebhalwe I-imeyile/SSL.
3. Skrolela ezantsi phantsi kwe-SSL Useto.
4. Cofa Khetha iSatifikethi.
5. Khangela kwaye ukhethe iSatifikethi esisebenzayo sokulayisha kwiseva.
6. Cofa Khetha iqhosha.
7. Khangela kwaye ukhethe iqhosha elisebenzayo elinokulayisha kwiseva.
8. Cofa Thumela Files.

Nje ukuba iSatifikethi kunye nesitshixo silayishwe ngempumelelo ungaqhubeka nokuseta i-HTTPS kwiiSetingi zeNethiwekhi.

• I-HTTPS Port: Faka inombolo ye-HTTPS ye-port eyabelwe imodyuli ye-LINQ8ACM (CB) ngumlawuli wothungelwano ukuvumela ukufikelela okude kunye nokubeka iliso. Isetingi yezibuko yangaphakathi engagqibekanga yi-443. Kuba iguqulelwe ngokuntsonkothileyo kwaye ikhuseleke ngakumbi, i-HTTPS iyanconywa kakhulu ukufikelela kude.
• Cofa iqhosha elinombhalo Ngenisa Izicwangciso zeNethiwekhi. Ibhokisi yencoko yababini iya kubonisa "Useto olutsha lwenethiwekhi luya kusebenza emva kokuba umncedisi eqalwe ngokutsha". Cofa u-Kulungile.

Ukufikelela kwi-LINQ8ACM(CB) usebenzisa i-Altronix Dashboard jonga kwiDashboard yokuFakela kunye ne-Programming Manual efumaneka kwi-flash drive.

Udweliso lwenkqubo ngeBhrawuza:

Xa ungasebenzisi iAltronix Dashboard uqhagamshelo lwe-USB kulungiselelo lokuqala lweNethiwekhi, i-LINQ8ACM(CB) idinga ukuqhagamshelwa kulo naluphi na unikezelo lombane lwe-DC okanye unikezelo lwamandla e-eFlow (ies) esweni phambi kocwangciso. Jonga kwi-LINQ8ACM(CB)'s Imiyalelo yokuFakelo kwiphepha lesi-3 lale ncwadana.

Imimiselo eMiselweyo yasefektri:

• Idilesi yeIP: 192.168.168.168
• Igama lomsebenzisi: admin
• Password: admin

1. Cwangcisa idilesi yeIP engatshintshiyo yelaptop ukuba isetyenziswe kudweliso lwenkqubo kuthungelwano idilesi ye IP njenge LINQ8ACM(CB), okt 192.168.168.200 (idilesi emiselweyo ye-LINQ8ACM(CB) yi-192.168.168.168).
2. Qhagamshela enye isiphelo sentambo yothungelwano kwi-network jack kwi-LINQ8ACM(CB) kunye nenye kuqhagamshelwano lwenethiwekhi yelaptop.
3. Vula isikhangeli kwikhompyuter kwaye ufake "192.168.168.168" kwibha yedilesi. Ibhokisi yencoko yababini Ukuqinisekisa kuyafuneka izakuvela icela zombini igama lomsebenzisi kunye negama lokugqitha. Ngenisa amaxabiso angagqibekanga apha. Cofa iqhosha elibhalwe Ngena.
4. Iphepha lemeko ye-LINQ8ACM(CB) liza kuvela. Eli phepha libonisa ubume bexesha lokwenyani kunye nempilo yonikezelo lwamandla ngalunye oluqhagamshelwe kwi-LINQ8ACM(CB).

Ukufaka iiparamitha ezintsha zothungelwano, yiya kuSeto lweNethiwekhi phantsi kwe-LINQ8ACM(CB) icandelo loqwalaselo lale ncwadana.

Uqwalaselo lwe-LINQ8ACM(CB):

I-ID yesayithi isetyenziselwa ukuchonga indawo kunye nenkcazo yesixhobo esibekwe esweni.

1. Cofa kwiNdawo yesithuba ukufikelela kwiphepha lobume.
2. Cofa kwiSazisi yeSiza phezulu ngasekhohlo, ibhokisi yencoko yababini iya kuvula.
3. Ngenisa indawo kunye nenkcazo yesixhobo esweni.
4. Cofa ungenise.

Ixesha kunye noMhla kufuneka zibekwe ukuze ngokuchanekileyo stamp ushicilelo lwenkqubo kunye nezilumkiso ze-imeyile.

1. Cofa kwiNdawo yesithuba ukufikelela kwiphepha lobume.
2. Cofa ixesha kunye nomhla phezulu ekhohlo, ibhokisi yencoko yababini iya kuvula.
3. Cofa ku-“SYNC DATE AND TIME”.

Umiselo lwezixhobo zokusebenza:

Cofa kwi Useto tab ukuvula i-Hardware Setup screen. Igalelo / Umiselo Lwemveliso:

1. Cofa kwi INPUT / OUTPUT isithuba phezulu kwesikrini.
2. I-ID yesiphumo: Faka igama elichazayo lesixhobo esiqhagamshelwe kwisiphumo esihambelanayo.
3. Ulawulo Lwemveliso: usebenzisa imenyu yokutsalela phantsi khetha ukuba imveliso iya kulawulwa ngegalelo lolawulo lofikelelo kwiitheminali zokuqalisa okanye isoftware elawulwayo.
   • Ulawulo lwegalelo: iziphumo zilawulwa ngeInput Trigger,
   • .Ulawulo lweManuwali: iziphumo zilawulwa ngesandla ngesoftware yeLINQ. Iziphumo ziya kulawulwa kusetyenziswa i-software-initiated trigger.
4. Iyaqhutywa: Ukukhangela okanye ukungaqwalaseli ibhokisi yemveliso enxulumeneyo iyakutshintsha imveliso xa iNgenisa iqhosha licofa. Iziphumo ezininzi zinokutshintshwa ngexesha elinye.
   PHAWULA: Lo msebenzi ukuba usetyenziswa kuLawulo lweManuwali kuphela.
5. Izimvo: igalelo lingacwangciswa ukulawula imveliso enye okanye iziphumo ezininzi.
   • Ulawulo lwemveliso enye: usebenzisa imenyu yokutsalwa kwemveliso ehambelanayo (okt Igalelo1 g Imveliso1), khetha uhlobo lwegalelo lolawulo lofikelelo HAYI Ivulwa ngesiqhelo okanye i-NC ivalwa ngesiqhelo.
   • Ulawulo lwemveliso ezininzi: usebenzisa imenyu yokutsalela-phantsi yazo zonke iziphumo eziza kulawulwa (okt Igalelo1 g Imveliso1 g Imveliso4 g Imveliso7) khetha uhlobo lwegalelo lolawulo lofikelelo HAYI Iqhele ukuvula okanye i-NC iqhele ukuvalwa. Zonke iziphumo ezikhethiweyo ziya kutshintsha imeko xa igalelo liqhutywa.
6. Uhlobo Lwemveliso: usebenzisa isithuba sokutsalela-phantsi khetha indlela imveliso eza kusetyenziswa ngayo: I-Fail-Safe (izixhobo ezifuna ukutshixa), Akuphumelelanga-Khusela (isixhobo sifuna amandla okukhulula), okanye iNcedisa (izixhobo ezifuna amandla angatshintshiyo rhoqo).
7. I-FACP: usebenzisa ithebhu yokutsalela-phantsi, khetha indlela imveliso eya kusabela ngayo xa isivusi somlilo siqhawulwa: Ayisebenzi (imveliso iya kuhlala isebenza), i-non-latching (imveliso iya kukhulula xa i-FACP iphinda isetyenzisiwe), iLatching (imveliso iya kuhlala isenziwa). xa i-FACP iphinda isetyenzisiwe kwaye ihlala iqhutywa de ikhutshwe ngesandla ngegalelo kwi-reset terminals).
8. Ugcino lwebhetri: khetha ukuba ngaba imveliso izakugcinwa ixhaswe kwimeko yokusilela kwamandla. Sukukhangela ibhokisi ehambelanayo ukuvala ibhetri emva kweso siphumo.
9. Ngaphantsi/Ngaphantsi Kwangoku: Ngenisa yomibini imida yangoku ePhakamileyo nePhantsi yesiphumo esinxulumeneyo. Ukuba enye yale mida igqithiwe kumyalezo wesilumkiso kunye/okanye isaziso se-imeyile siya kwenziwa.
10. Ngaphezulu/Ngaphantsi Komqulutage: Ngenisa zombini ivolumu ephezulu kunye nePhantsitage imida yesiphumo esinxulumeneyo. Ukuba enye yale mida igqithiwe kumyalezo wesilumkiso kunye/okanye isaziso se-imeyile siya kwenziwa.
11. Cofa iqhosha elinombhalo Ngenisa ukugcina izicwangciso.

Useto lobushushu:

1. Cofa kwindawo yobushushu isithuba phezulu kwesikrini.
2. Faka iqondo lobushushu obuphezulu kwiCelsius.
3. Cofa iqhosha elinombhalo Ngenisa ukugcina izicwangciso.

Umhla wenkonzo yebhetri:

Ukuba iibhetri azisetyenziswa susa ukukhangela ibhokisi ephantsi kwePresent ukuyekisa ukubeka iliso kwebhetri.

1. Cofa kwi iibhetri thebhu phezulu kwesikrini.
2. Faka umhla ezifakelwe ngawo iibhetri phantsi koMhla woFakelo kubonelelo lombane ngalunye oluqhagamshelweyo.
3. Faka umhla wenkonzo yebhetri phantsi koMhla weNkonzo kubonelelo lwamandla ngalunye oluqhagamshelweyo.
   PHAWULA: Iibhetri kufuneka zihlolwe ubuncinane kanye ngonyaka. Nokuba ubomi bebhetri obulindelekileyo yiminyaka emihlanu (5) kuyacetyiswa ukuba kutshintshe iibhetri rhoqo emva kweminyaka emine (4).
4. Cofa iqhosha elinombhalo Ngenisa ukugcina izicwangciso

Iisetingi zoBonelelo lwaMandla:

Ukuba mnye kuphela (1) unikezelo lombane olusetyenziswayo sukukhangela ibhokisi ephantsi kwe Present ecaleni konikezelo lombane olungasetyenziswanga ukuvala ukubeka iliso.

1. Cofa kwi Ubonelelo lwamandla ithebhu phezulu kwesikrini.
2. Ngaphezulu/Ngaphantsi Komqulutage: Faka zombini ivolumu ephezulu kunye nePhantsitage imida yegalelo elinxulumeneyo. Ukuba enye yale mida igqithiwe kumyalezo wesilumkiso kunye/okanye isaziso se-imeyile siya kwenziwa.
3. Ngaphezulu/Ngaphantsi Kwangoku: Faka yomibini imida yangoku ePhakamileyo nePhantsi yegalelo elihambelanayo. Ukuba enye yale mida igqithiwe kumyalezo wesilumkiso kunye/okanye isaziso se-imeyile siya kwenziwa.
4. Cofa iqhosha elinombhalo Ngenisa ukugcina izicwangciso

Imveliso yoLungiso lwangoku:

Ngexesha lokuseta okokuqala zonke iziphumo kufuneka zilinganiswe ukuqinisekisa ufundo lwangoku oluchanekileyo.

1.  Cofa kwi-Calibration ithebhu phezulu kwesikrini.
2. Ngayo yonke imithwalo evaliweyo, nqakraza kwisithuba esibhalwe Lungiselela Zonke Zero Offset Currents ukuseta yonke imisinga yemveliso ibero.
3.  Ukuqhagamshela imveliso nganye ngexesha, linganisa umzobo wangoku kwaye ufake eli xabiso lale mveliso phantsi kweEyiyo.
4. Cofa kwiqhosha elinombhalo othi Calibrate Gain ukugcina useto.
5.  Phinda amanyathelo 3 & 4 kuzo zonke iziphumo eziseleyo.

Xa ufaka enye indawo okanye usongeza isixhobo esitsha imveliso kufuneka ihlaziywe.

1. Cofa kwi-Calibration ithebhu phezulu kwesikrini.
2. Ngomthwalo okhutshiweyo kwimveliso, nqakraza kwisithuba esinombhalo othi Calibrate Offset kwimveliso ukuseta yangoku ukuya kwiqanda.
3. Qhagamshela imveliso, linganisa umzobo wangoku kwaye ufake eli xabiso phantsi kweEyiyo.
4. Cofa kwiqhosha elinombhalo othi Calibrate Gain ukugcina useto.
5. Phinda amanyathelo 3 & 4 kuzo zonke iziphumo eziseleyo.

Umiselo lwesibali-xesha:

Cofa kwi-Timer tab ukuze ufikelele kwiscreen sokuseta izibali-xesha.

1. Cofa kwi Yongeza ibha yesibali-xesha esitsha.
2. Ileyibhile yesibali-xesha: Faka igama elichazayo lomsebenzi wesibali-xesha.
3. Isibali-xesha Umhla wokuqalisa: Faka umhla apho umsebenzi wexesha oza kuqala ngawo (okt 10/09/2019).
4. Isithuba sexesha: Ukusebenzisa imenyu yokutsalela phantsi khetha ikhefu ixesha eliza kusebenza ngalo.
5. Ixesha lokuQalisa isibali-xesha: faka ixesha oza kuqalisa ngalo isiganeko sesibali-xesha.
6. Iintshukumo zesibali-xesha: Khetha umsebenzi wesiphumo ngasinye esiya kwenzeka ngexesha lesiganeko sesibali-xesha.
7. Cofa iqhosha elinombhalo Ngenisa ukugcina izicwangciso.
   Ukongeza imicimbi yesibali-xesha esongezelelweyo, phinda amanyathelo 1-7.

Umiselo lweNethiwekhi:

1. Cofa kwi-TCP/IP ithebhu ukuze ufikelele kwiscreen sokuseta IP.
2. Cofa kwi Cwangcisa Useto lwe IP ithebhu phezulu kwesikrini ukufikelela kwi-IP setup.
3. Kwintsimi yeNdlela sebenzisa imenyu yokutsalela phantsi khetha indlela eya kufumaneka idilesi ye-IP ye-LINQ8ACM (CB): "Static" okanye "DHCP", emva koko ulandele amanyathelo afanelekileyo angezantsi.

NONE

• Idilesi yeIP: Ngenisa idilesi ye-IP eyabelwe i-LINQ8ACM(CB) ngumlawuli wothungelwano.
• Subnet Vuvu: Ngenisa iSubnet yenethiwekhi.
• Isango: Ngenisa isango le-TCP/IP yendawo yokufikelela kwinethiwekhi (i-router) esetyenziswayo. Ubumbeko besango luyafuneka ukuze ufumane ngokufanelekileyo ii-imeyile ezivela kwisixhobo.
• Isiqhagamshelanisi seHTTP: Ngenisa inombolo ye-HTTP yezibuko eyabelwe imodyuli ye-LINQ8ACM(CB) ngumlawuli wothungelwano ukuvumela ufikelelo olukude kunye nokubeka iliso. Ucwangciso lwezibuko lwangaphakathi olungagqibekanga ngama-80. I-HTTP ayintsonkothanga kwaye ayikhuselekanga. Nangona i-HTTP ingasetyenziselwa ukufikelela kude, iyacetyiswa ukuba isetyenziswe ngoqhagamshelo lwe-LAN.
• Izibuko le-HTTPS: Ngenisa inombolo yezibuko ye-HTTPS eyabelwe imodyuli ye-LINQ8ACM(CB) ngumlawuli wothungelwano ukuvumela ukufikelela okude kunye nokubeka iliso. Isetingi yezibuko yangaphakathi engagqibekanga yi-443. Kuba iguqulelwe ngokuntsonkothileyo kwaye ikhuseleke ngakumbi, i-HTTPS iyanconywa kakhulu ukufikelela kude. Xa i-HTTPS isetyenziswa kucetyiswa ukuba ungayikhangeli ibhokisi ecaleni kweHTTP ukuyekisa ukusetyenziswa kwayo.
• Xa yonke imimandla igqityiwe cofa iqhosha elinombhalo othi Thumela.
• Cofa iqhosha elinombhalo othi Qalisa kwakhona ukugcina useto.

I-DHCP

• Emva kokukhetha i-DHCP kwindawo yeNdlela cofa iqhosha elinombhalo othi Thumela. Okulandelayo, cofa kwiqhosha elinombhalo othi Qalisa kwakhona ukugcina useto. Emva kokuqalisa kwakhona i-LINQ8ACM(CB) iya kusekwa kwimo ye-DHCP. Idilesi ye-IP iya kwabelwa ngumzila xa LINQ8ACM(CB) iqhagamshelwe kwinethiwekhi. Jonga umlawuli wenethiwekhi yeeparamitha zeDHCP.
• I-Subnet Mask: Xa usebenza kwi-DHCP umzila uya kwabela ixabiso le-subnet mask.
• Isango: Isango leTCP/IP lendawo yofikelelo lwenethiwekhi (i-router) esetyenziswayo iya kuboniswa.
• I-HTTP Port: Faka inombolo ye-HTTP ye-port eyabelwe imodyuli ye-Linq8ACM ngumlawuli wenethiwekhi ukuvumela ukufikelela okude kunye nokubeka iliso. Ucwangciso lwezibuko lwangaphakathi olungagqibekanga ngama-80. I-HTTP ayintsonkothanga kwaye ayikhuselekanga. Nangona i-HTTP ingasetyenziselwa ukufikelela kude kuyacetyiswa ukuba isetyenziswe ngoqhagamshelo lwe-LAN.
• I-HTTPS Port: Faka inombolo ye-HTTPS yezibuko eyabelwe imodyuli ye-LINQ8ACM (CB) ngumlawuli wothungelwano ukuvumela ukufikelela okude kunye nokubeka iliso. Ukusetwa kwe-port yangaphakathi engagqibekanga yi-443.Ukubethelwa kunye nokukhuseleka ngakumbi, i-HTTPS inconywa kakhulu ukufikelela kude.
• Xa yonke imimandla eyongezelelweyo igqityiwe cofa iqhosha elinombhalo othi Thumela.
• Cofa iqhosha elinombhalo othi Qalisa kwakhona ukugcina useto.

Izicwangciso zamafu:

Inkxaso yelifu ye-LINQ8ACM(CB) ivaliwe ngokungagqibekanga. Xa inkxaso yefu ivuliwe, i-LINQ8ACM (CB) iya kusebenzisa inkxaso yefu ukubonelela ngezaziso ze-imeyile kunye nokubonelela ngohlaziyo xa lukhona. Khangela ibhokisi esecaleni kwe Vulela ukuvumela umsitho wezaziso ze-imeyile ngenkxaso yelifu.

Iisetingi ezikwinqanaba eliphezulu:

Itrafikhi yothungelwano lwamafu inokuphinda iqondiswe kwiiseva zasekhaya ukuba ziyafuneka.

1. Ngenisa idilesi ye-IP yomncedisi welifu kwindawo yendawo yedilesi ye-IP.
2. Ngenisa i-ID yepro kwibala leZibuko.
3. Khangela kwibhokisi esecaleni kwe Vulela.
4. Cofa iqhosha elinombhalo Ngenisa ukugcina isicwangciso.
   Xa usebenzisa umncedisi wasekuhlaleni kwaye i-SSL/TLS iyasebenza, kuya kufuneka ukuba kufakwe isatifikethi esitsha.

Ukulayishwa kwesatifikethi:

1.  Cofa kwiSitifiketi sesithuba phezulu kwesikrini.
2. Cofa ku Khetha iSatifikethi File kwaye ufumane isatifikethi esitsha.
3. Layisha isatifikethi.
4. Cofa iqhosha elinombhalo Ngenisa ukugcina i file.

Umiselo lwe-imeyile:

1. Cofa kwindawo ye-imeyile ukuze ufikelele kwiseto lwe-imeyile yesikrini.
2. Cofa ku Ephumayo thebhu ukufikelela kwi ephumayo Izicwangciso imeyile screen.
3. Faka ukuya kuthi ga ezintlanu (5) iidilesi ze-imeyile eziphumayo eziza kufumana izilumkiso ze-imeyile.
4. Nje ukuba zonke ii-imeyile zifakiwe cofa i Faka iqhosha ukugcina useto.

Uvavanyo lwe-imeyile:

1. Cofa kwithebhu yoVavanyo ukufikelela kwiscreen soVavanyo lwe-imeyile.
2. Ukusebenzisa imenyu yokutsala khetha umyalezo wovavanyo oza kuthunyelwa.
3. Cofa i Thumela iqhosha ukuze kuthunyelwe umyalezo wovavanyo.

Imimiselo yoKhuseleko lweNethiwekhi:

1. Cofa kwindawo yoKhuseleko ukuze ufikelele kwiSeto loKhuseleko kwesikrini.
2. Cofa isithuba esifanelekileyo phezulu kwekhusi ukuze imihlaba icwangciswe.

Imigaqo-nkqubo:

Khetha isilumkiso sokhuseleko esiza kuboniswa xa ungena kwisixokelelwano ngokujonga ukubonisa kunye nokungaqwalaseli ukuba ungabonisi umyalezo olumkisayo.

Umiselo Lwesatifikethi Sokuzisayina:

Ukuvelisa iSatifikethi se-SSL esizityikitye kunye nesitshixo:

1. Ilizwe: Ikhowudi yeeleta ezimbini ezimele urhulumente apho umbutho ukhoyo.
2. Indawo: Isixeko apho umbutho ukhoyo.
3.  Umbutho: Igama elisemthethweni lombutho. Oku akufuneki kushunqulelwe, kwaye kufuneka kuquke izimamva ezifana ne-Inc., Corp, okanye i-LLC.
4. Igama leYunithi: Igama lesixhobo.
5. Igama eliqhelekileyo: Igama lesizinda okanye idilesi ye-IP yomncedisi. Oku kunikezelwa ngumlawuli wenethiwekhi.
6. Idilesi ye-imeyile: Idilesi ye-imeyile esetyenziselwa ukuqhagamshelana nombutho.
7. Emva kokuba wonke umhlaba ugqityiwe cofa iqhosha elinombhalo othi Ngenisa ukugcina isicwangciso

PHAWULA: Isatifikethi se-SSL esizityikitye ngokwaso siya kuveliswa ngolwazi olunikezelwe kwiinkalo ze-"SSL Certificate Settings". Isatifikethi siya kusebenza iintsuku ezingama-500, kunye nexesha stamped kunye noseto lwexesha olukhoyo kwimodyuli yeLINQ8ACM(CB). Umhla kunye nexesha kufuneka zingqinelaniswe nekhompyuter yehostele phambi kokwenza isatifikethi se-SSL.

Ukulayishwa kwesatifikethi:

Ukufaka iSatifikethi sabucala kunye neSitshixo.

1. Ngaphantsi kokufakwa kweSitifiketi cofa kuKhetha iSatifikethi File.
2. Khangela isatifikethi esitsha file.
3. Layisha isatifikethi file.
4. Ngaphantsi kokulayisha okungundoqo cofa ku Khetha isitshixo File.
5. Khangela isatifikethi esitsha file.
6. Layisha Isitshixo file.
7. Cofa iqhosha elibhalwe Thumela file gcina se

Iisetingi Zomsebenzisi:

Kukho amanqanaba asebenzayo aliqela akhoyo.

Umlawuli: Inokufikelela kuyo yonke imisebenzi.
Ubume/Umiselo: Inolawulo oluvuliweyo/lucimile kwaye lunokuthiya ngokutsha unikezelo lwamandla.
Network: Le isicwangciso sesabaphathi beIT.
Ugcino: Inokufikelela ekuguquleni izilumkiso kunye nolawulo lwesibali-xesha.

Ukumisela Abasebenzisi:

1. Cofa kwi Abasebenzisi thebhu.
2. Cofa ku Faka iqhosha lomsebenzisi omtsha iFomu yoMsebenzisi oMtsha iya kuvula.
3. Ngenisa igama lomsebenzisi.
4. Ngenisa igama eligqithisiweyo elilodwa phantsi kwegama lokugqithisa elitsha.
5. Phinda ufake igama lokugqitha phantsi koQinisekisa igama lokugqithisa.
6. Khetha uhlobo lomsebenzisi kunye namalungelo umsebenzisi anawo: Funda/Bhala (unokwenza utshintsho) okanye Funda Kuphela (view kuphela). Umsebenzisi unokusetwa njengomlawuli ngokucofa ku YENZA i-ADMIN ngaphezulu kweqhosha elithi Ngenisa.
7. Cofa kwindawo ethi Thumela ukugcina useto.
8. Phinda oku ngasentla ukongeza abasebenzisi abongezelelweyo.

Izilumkiso kunye neNgxelo yoLungiso lokulibazisa:

Izivuseleli zinokwenziwa ukuba zithumele isaziso sokuba isiganeko senzeka okanye sikhutshiwe ukuba singahoyi isiganeko kwaye singathumeli isaziso.

Ukuyekisa isiganeko, sukukhangela i-Vulela ibhokisi ecaleni kwesiganeko eza kuvalwa. Ukuvula isiganeko kwakhona, khangela ibhokisi esecaleni kwe-even

Iziganeko zinokusetwa ukuba zilibaziseke phambi kokuba kuxelwe.

Ukuseta ukulibaziseka kwengxelo faka ixesha lokulibaziseka kwikholamu phantsi kweNgxelo yokuLibazisa kwisiganeko esihambelanayo. Ixesha lokulibazisa libekwe kwimizuzwana. Yonke imisitho ilungiselelwe imizuzwana emi-2. Nje ukuba yonke imimandla igqityiwe cofa iqhosha elinombhalo Ngenisa ukugcina useto lomsitho. Phinda ukuze yonke eminye imisitho icwangciswe.

I-Hook-Up diagrams:

Umzobo 6 – Daisy-chaining enye okanye ngaphezulu LINQ8ACM(CB) iiyunithi.
I-EOL Jumper [EOL JMP] (Umfanekiso 5, iphe. 5, Z) kufuneka ifakwe kwindawo "EN". Ukungaqhawuki.

Isazobe 7- Daisy-chaining enye okanye ngaphezulu LINQ8ACM(CB) iiyunithi. I-EOL Jumper [EOL JMP] (Umfanekiso 5, iphe. 5, Z) kufuneka ifakwe kwindawo "EN". Latching Single Reset.

Umzobo 8 – Daisy ityathanga enye okanye ngaphezulu LINQ8ACM(CB) iiyunithi. I-EOL Jumper [EOL JMP] (Umfanekiso 5, iphe. 5, Z) kufuneka ifakwe kwindawo "EN". UkuLatching Ukusetha kwakhona komntu ngamnye.

Umzobo 9 -I-Polarity reversal input evela kwi-FACP yokubonisa imveliso yesiphaluka (i-polarity ibhekiselele kwimeko ye-alarm). UkungaLatching.

Isazobe 10- I-Polarity reversal input evela kwi-FACP yokubonisa imveliso yesiphaluka (i-polarity ibhekiselele kwimeko ye-alamu). Ukuqhobosha.

Isazobe 11- Ngesiqhelo Ivalwe igalelo letrigger (Ayicikwayo)

Isazobe 12- Ngesiqhelo Ivalwe igalelo letrigger (Latching).

Isazobe 13- Ngesiqhelo Vula igalelo lokuqalisa (AkuLatching).

Isazobe 14- Ngesiqhelo Vula igalelo letrigger (Latching).

I-Altronix ayinaxanduva lwazo naziphi na iimpazamo zokuchwetheza.
140 58th Street, Brooklyn, New York 11220 USA | ifowuni: 718-567-8181 | ifeksi: 718-567 9056
webindawo: www.altron

Amaxwebhu / Izibonelelo

LINQ LINQ8ACM Series Network Access Controller Power, 8 PTC [pdf] Incwadi Yomyalelo LINQ8ACM Series Network Access Power Controller, 8 PTC, LINQ8ACM Series, Network Access Power Controller 8 PTC, Power Controller 8 PTC, Controller 8 PTC

Iimbekiselo

• Incwadi yokusebenzisa