LINQ8ACM Series Network Access Power Controller, 8 PTC Taelo Manual
LINQ8ACM Series Network Access Power Controller, 8 PTC

Litaba pata
1 Fetileview
2 Litlhaloso
3 Litaelo tsa ho Hloma
4 Boitsebiso ba Terminal/Connector
5 Lisebelisoa tsa LED
6 Moqtage Regulator
7 Litlhaloso:
8 Hokela LINQ8ACM(CB) ho VR6:
9 Setšoantšo se Tloaelehileng sa Tšebeliso:
10 Tlhophiso ea Marang-rang:
11 Litlhophiso tsa Marang-rang:
12 Secure Network Setup (HTTPS):
13 Tlhophiso ea LINQ8ACM(CB):
14 Litšoantšo tsa Hook-Up:
15 Litokomane / Lisebelisoa
15.1 Litšupiso
16 Related Posts

Fetileview

Altronix LINQ8ACM(CB) ke li-control tsa matla a phihlello tsa marang-rang a UL tse ka kengoang leboteng la Altronix le maboteng a rack ho tsamaisa phepelo ea taolo ea phihlello. Moralo o kopanetsoeng oa Access Power Controller o lumella matla ho tsamaisoa ho tloha ho e le 'ngoe (1) kapa tse peli (2) tse ikemetseng tse tlase.tage 12 kapa 24 VDC Altronix phepelo ea matla ho tse robeli (8) e ikemetseng e laoloang fuse (LINQ8ACM) kapa PTC (LINQ8ACMCB) liphetho tse sirelelitsoeng. Dipoelo di kenngwa tshebetsong ke sink e bulehileng ya pokello, eo ka tlwaelo e butsweng (NO), eo hangata e kwalwang (NC) ho kenya trigger e omileng, kapa tlhahiso e metsi ho tswa ho Access Control System, Card Reader, Keypad, Push Button, PIR, jj. LINQ8ACM(CB) e tla matla a tsela ho ea ho lisebelisoa tse fapaneng tsa ho laola lisebelisoa tsa lisebelisoa tse kenyeletsang Mag Locks, Litlhaselo tsa Motlakase, Magnetic Door Holders, joalo-joalo Outputs e tla sebetsa ka mekhoa e 'meli ea Fail-Safe le / kapa Fail-Secure. FACP Interface e nolofalletsa Emergency Egress, Alarm Monitoring, kapa e ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Tšobotsi ea ho khaola alamo ea mollo e ka khethoa ka bonngoe bakeng sa liphetho leha e le life kapa kaofela tse robeli (8). Lihokelo tsa li-spade li u lumella ho kenya matla a ketane ho li-module tse ngata tsa LINQ8ACM(CB). Karolo ena e u lumella ho aba matla holim'a liphetho tse ngata bakeng sa litsamaiso tse kholoanyane. LINQTM Network Power Management e hahiloeng kahare e thusa ho lekola, ho tlaleha le ho laola matla / tlhahlobo.

Litlhaloso

Lethathamo la Setsi:

  • UL 294 7th Edition: Likarolo tsa Tsamaiso ea Phihlello.
  • UL 294 7th Edition Maemo a Tshebetso: Tlhaselo: I, Endurance: IV, Line Security: I, Ema-ka Matla: I.

Keletso Voltage Likhetho:

  • Kenyo e le 'Ngoe:
    Input1: 12 kapa 24 VDC ho tsoa ho eFlow series power supply.
  • Khetho ea 1 ea ho Kenya Habeli:
    • Kenyeletso 1: 12 kapa 24 VDC ho tsoa ho eFlow series power supply.
    • Kenyelletso 2: a – 12 kapa 24 VDC ho tswa ho eFlow series power supply.
    • 5 kapa 12 VDC ho tloha VR6 voltagmolaoli.
  • Khetho ea 2 ea ho Kena habeli: 24 le 12 VDC ho tsoa ho Tango1B PoE Driven Power Supply.
  • Kena Hona Joale:
    LINQ8ACM: 20A kakaretso
    LINQ8ACMCB: 16A kakaretso.
  • Tšebeliso ea matla ka hare: 300mA @24VDC kapa 600mA@12VDC
  • Litlhahiso tse robeli (8):
    • Ka tloaelo ho bula (NO) ho kenya (likhokahano tse omileng).
    • Ka tloaelo ho koetsoe (NC) (likhokahano tse omileng).
    • Bula lisebelisoa tsa sink ea pokello.
    • Keno e Metsi (5VDC - 24VDC) e nang le 10K resistor.
    • Motsoako ofe kapa ofe oa tse ka holimo.

Liphetho:

  • LINQ8ACM: Liphetho tse sirelelitsoeng tsa Fuse li behiloe @ 2.5A ka tlhahiso, ha e na moeli oa matla. Kakaretso ea tlhahiso 20A max.
    LINQ8ACMCB: Liphetho tse sirelelitsoeng tsa PTC li behiloe @ 2A ka tlhahiso, Sehlopha sa 2 se na le matla a fokolang. Kakaretso ea tlhahiso 16A max.
    Se ke oa feta litekanyetso tsa phepelo ea motlakase ka bomong.
    Sheba Input/Output Voltage Litekanyo, leq. 6.
    Sheba Sephetho se Phahameng sa Lisebelisoa tsa Matla a Altronix.
  • Liphetho tse robeli (8) tse ka khethoang ka botsona (sheba ka tlase bakeng sa lintlha):
    • Fail-Sireletsehile le/kapa Fail-Sireletsehile diphetho tsa matla.
    • Lisebelisoa tsa motlakase tse thusang (tse sa fetoheng).
    • Motsoako ofe kapa ofe oa tse ka holimo.
  • Liphetho tsa motho ka mong li ka hlophisoa ho OFF boemo bakeng sa ts'ebeletso (output jumper set to the middle).
  • Leha e le efe ho tse robeli (8) tse hlahisoang ke matla a sirelelitsoeng a fuse/PTC li ka khethoa ho latela Kenyo ea 1 ea matla kapa Input 2.
    Sephetho voltage ea tlhahiso e 'ngoe le e 'ngoe e tšoana le matla a ho kenyatage ea tse kentsoeng.
    Sheba Input/Output Voltage Litekanyo, leq. 6.
  • Khatello e phahameng.

Lintlha tsa Fuse:

  • LINQ8ACM: Li-fuse tsa mantlha tse kentsoeng ke 15A/32V e 'ngoe le e 'ngoe. Li-fuse tse hlahisoang ke 3A/32V.
  • LINQ8ACMCB: Kenyelletso ea mantlha ea li-PTCs li fuoe lintlha tse 9A e 'ngoe le e 'ngoe. Li-PTC tse hlahisoang li fuoe lintlha tse 2A.

Likarolo tse Rerang:

  • Liphetho tse robeli (8) tse ka hlophisehang:
    • Liphetho tse hlolehileng, tse sirelelitsoeng kapa tse thusang.
    • Ketso e laoloa kapa e laoloa ka letsoho ka software.
    • Phahameng (ho feta) le tlase (tlase) voltage le tlhokomelo ea hona joale ka tlhahiso.
    • Liphetho tse ngata li ka hlophisoa hore li hlahisoe ke tlhahiso e le 'ngoe.
    • Backup ea betri ka tlhahiso.
  • Menyetla e robeli (8) ea ho qalisa:
    • Hangata e butsoe (NO).
    • Hangata colsed (NC).
    • Bula lisebelisoa tsa sink ea pokello.
    • Keno e Metsi (5VDC – 24VDC) e nang le 10k resistor.
    • Motsoako ofe kapa ofe oa tse ka holimo.
  • Li-ID tsa boema-kepe tse ka reroang.
  • Lekola tlhahiso ea motlakase (ies) bakeng sa voltage le meeli e nepahetseng (e phahameng / tlase).
  • Kenyelletso le tlhahiso ea hona joale.
  • Liketsahalo tsa sebali sa nako.
  • Maemo a ka lokisehang a basebelisi.
  • Dumella kapa o tima litlhokomeliso ka mofuta.
  • Ho lieha ho fana ka tlaleho ea tlhokomeliso

Khaola Alarm ea Mollo:

  • Ho khaoha ha Alarm ea Mollo (E sa sebetseng, e latching kapa e sa thekeseleng) e ka khethoa ka bonngoe bakeng sa liphetho life kapa life tse robeli (8).
    Likhetho tsa ho kenya Alarm ea Mollo:
    • Tlhokomelo e Tloaelehileng e Bulehile [NO] kapa e Tloaelehileng e Koetsoe [NC] e omileng ea ho kopanya.
    • Kenyelletso ea ho khutlisa polarity ho tsoa ho potoloho ea matšoao a FACP.
  • FACP input WET ke rated 5-30VDC 7mA.
  • FACP dry input EOL e hloka pheletso ea 10K ea mohanyetsi oa mohala.
  • FACP output relay [NC]: Ekaba Dry 1A/28VDC, 0.6 Power Factor kapa 10K ho hanyetsa ka [EOL JMP] e sa fetoheng.

Lipontšo tsa LED:

  • Green AC LED: e bonts'a boemo ba bothata ba AC.
  • Green BAT LED: e bonts'a boemo ba bothata ba betri.
  • Green FACP LED: e bonts'a ho hakolloa ha FACP ho qalile.
  • Flashing Blue Heartbeat LED: e bonts'a khokahano ea marang-rang.
  • Motho ka mong OUT1 - OUT8 Li-LED tse khubelu: li bonts'a hore liphetho li hlahisitsoe.
  • Motho ka mong Voltage LEDs: bontša 12VDC (Green) kapa 24VDC (Red).

Tikoloho:

  • Mocheso o sebetsang: 0ºC ho isa ho 49ºC tikolohong.
  • Mongobo: 20 ho isa ho 93%, e sa fokotseng.

Mechini:

  • Litekanyo tsa Boto (W x L x H hoo e ka bang): 8" x 4.5" x 1.25" (203.2mm x 114.3mm x 31.8mm).
  • Boima ba sehlahisoa (hoo e ka bang): 0.7 lb (0.32 kg).
  • Boima ba ho romella (hoo e ka bang): 0.95 lb (0.43 kg).

Litaelo tsa ho Hloma

Mekhoa ea lithapo e tla ba ho latela Khoutu ea Naha ea Motlakase NFPA 70/NFPA 72/ ANSI / Khoutu ea Motlakase ea Canada / CAN/ULC-S524/ULC-S527/ULC-S537, le ka likhoutu tsohle tsa lehae le ba boholong ba nang le matla. Sehlahisoa se reretsoe tšebeliso e omileng ea ka tlung feela.

Sheba Taelo ea ho Kenyeletsoa ha Kopano e Nyenyane bakeng sa ho kenya Rev. MS020119. 

  1. Thaba ea LINQ8ACM(CB) sebakeng se lakatsehang / sebaka se koaletsoeng. Ha o kenya LINQ8ACM(CB) feela, sebelisa
    li-spacers tsa basali / basali (ho fanoe). Ha o hlongoa ka boikhethelo ba VR6 voltage regulator kapa Tango1B PoE
    Phepelo ea Matla a Khannoang, sebelisa li-spacers tsa basali / basali (tse fanoeng) lipakeng tsa LINQ8ACM(CB) le VR6 kapa Tango1B
    (Setšoantšo sa 3, leqephe la 7, setšoantšo sa 4, leqephe la 8).
  2. Netefatsa hore li-output jumpers tsohle [OUT1] - [OUT8] li behiloe sebakeng sa OFF (bohareng).
  3. Connect low lowtagPhepelo ea motlakase ea DC ho liteminale tse tšoailoeng [+ PWR1 –], [+ PWR2 –].
    Hlokomela: Bakeng sa ho kenya VR6 le Tango1B ka kopo, sheba pg. 7, 8.
  4. Beha tlhahiso e 'ngoe le e 'ngoe [OUT1] - [OUT8] ho tsamaisa matla a tsoang ho Power Supply 1 kapa 2 (Setšoantšo sa 1).
    Taelo ea ho kenya
    Hlokomela: Lekanya tlhahiso voltage pele o kopanya lisebelisoa.
    Sena se thusa ho qoba tšenyo e ka bang teng.
  5. Tima motlakase o moholo pele o hokela lisebelisoa.
  6. Likhetho tsa Output (likhetho tsa tlhahiso ea lenaneo ka software ea LINQ):
    LINQ8ACM(CB) e tla fana ka lisebelisoa tsa motlakase tse ka fihlang ho tse robeli (8) hammoho le lisebelisoa tse robeli (8) tse sa fetoheng tsa motlakase.
    Liphetoho tsa Power tse fetotsoeng:
    Hokela molaetsa o fosahetseng (–) oa sesebelisoa se tsamaisoang ho terminal e tšoailoeng [COM].
    • Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC].
    • Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
      Lisebelisoa tsa Motlakase (ha li sa fetoloa):
      Hokela sesebediswa se nepahetseng (+) se sebediswang ho theminale e ngotsweng [C] le negative (–) ya sesebediswa se tsamaisoang ho theminale e ngotsweng [COM]. Sephetho se ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
  7. Laeta motlakase oa mantlha ka mor'a hore lisebelisoa tsohle li hoketsoe.
  8. Likhetho tsa Input Trigger (lenaneo le qala likhetho tsa ho kenya ka software ea LINQ):
    Hlokomela: Haeba ho khaoha ha Alarm ea Mollo ho sa sebelisoe, hokela sehanyetsi sa 10 kOhm ho litheminale tse tšoailoeng [GND le EOL].
    Kenyo:
    Hokela taolo e ommeng ea phihlello (NC/NO) ho liteminale tse tšoailoeng [+ INP1 –] ho [+ INP8 –].
    Bula Kenyelletso ea Sink ea Collector:
    Hokela sink e bulehileng ea pokello ea metsi ho theminale e tšoailoeng [+ INP1 –] ho [+ INP8 –].
    Metsi (Moqtage) Tlhophiso ea Kenyeletso:
    Ho shebella ka hloko polarity, hokela voltage input trigger wires le 10K resistor e fanoeng ho
    liteishene tse tšoailoeng [+ INP1 –] ho ea ho [+ INP8 –].
  9. Likhetho tsa Sehokelo sa Alarm ea Mollo (likhetho tsa sebopeho sa alamo ea mollo ka software ea LINQ):
    [NC] e koetsoeng ka tloaelo, hangata e buloa [NO] kapa keno e khutlisang polarity ho tsoa ho potoloho ea matšoao a FACP
    e tla hlahisa liphetho tse khethiloeng.
    Ka tloaelo Bula Kenyo:
    Kopanya relay ea hau ea FACP le sehanyetsi sa 10K ka 'moho ho litheminale tse tšoailoeng [GND] le [EOL].
    Kenyelletso e Tloaelehileng:
    Kopanya relay ea hau ea FACP le sehanyetsi sa 10K ho litheminale tse tšoailoeng [GND] le [EOL].
  10. FACP Dry NC tlhahiso:
    Hokela sesebediswa se lakatsehang se tla susumetswa ke yuniti e ommeng ya kgokahano ho ditheminale tse ngotsweng [NC] le [C].
    Ha [EOL JMP] e le boemong ba DIS, tlhahiso ke ea 0 Ohm ho hanyetsa boemong bo tloaelehileng.
    Ha [EOL JMP] e le boemong ba EN, khanyetso ea 10k e tla fetisetsoa sesebelisoa se latelang ha e le boemong bo tloaelehileng.

Boitsebiso ba Terminal/Connector

Setšoantšo sa 2 - LINQ8ACM
Boitsebiso ba Mohokahanyi

Theminale/Legend Tlhaloso
A PWR1 + Motlakase oa pele oa DC.
B PWR2 + Kenyelletso ea phepelo ea motlakase ea bobeli ea DC.
C Leseli la LED Sephetho sa motho ka mong voltagle li-LED. 12VDC (Tala) kapa 24VDC (E khubelu).
D Output Jumper Sephetho sa motho ka mong voltage khetho jumper.
E TLHOKOMELISO - Tloaelehileng Negative H plug bakeng sa lihokelo tsa likharebe.
F Sehlahisoa 1 ka
Sephetho sa 8
NO, C, NC, COM		 Liphetho tse robeli (8) tse ka khethoang ka boikemelo tse laoloang [Fail-Safe (NC) kapa Fail-Secure (NO)].
G - F, + F FACP Signaling Circuit Input terminals. Sehlopha sa 2 se na le matla a fokolang.
H -R, + R FACP Signaling Circuit Return terminals. Sehlopha sa 2 se na le matla a fokolang.
I GND, EOL EOL E hlokometseng liteishene tsa ho Kena tsa FACP bakeng sa ts'ebetso ea polarity ea ho khutlisa FACP. Sehlopha sa 2 se na le matla a fokolang.
J GND, AST FACP segokanyimmediamentsi sa sebolokigolo latching kapa e seng latching. HA HO se kentsoeng se ommeng. Sehlopha sa 2 se na le matla a fokolang. E tla khutsufatsoa bakeng sa sebopeho sa FACP se sa ts'oanelang kapa Latch FACP reset.
K C, NC Phatlalatso ea FACP Dry NC rated 1A/28VDC @ 0.6 Power Factor. Sehlopha sa 2 se na le matla a fokolang. Ka EOL JMP e tiile, e tla fana ka khanyetso ea 10k maemong a tloaelehileng.
L + PS1 - Khokahano ho litheminale tsa [+ BAT —] tsa Phepelo ea Motlakase 1.
M + BAT - Khokahano le batten ba emeng/(ies) bakeng sa Phepelo ea Motlakase 1.
N + PS2 - Khokahano ho litheminale tsa [+ BAT —] tsa Phepelo ea Motlakase 2.
O + BAT - Khokahano ho betri(ies) e emeng bakeng sa Phepelo ea Motlakase 2.
P + INP1 - ka + INP8 - Tse robeli (8) tse laoloang ka boikemelo Normally Open (NO), Ka tloaelo Ho Koetsoe (NC), Open Collector Sink kapa Wet Input Triggers.
Q Tamper Tamper Fetola Input.
R AC / NC, C Hokela lisebelisoa tse nepahetseng tsa tsebiso ho li-terminal ho tlaleha hore AC e hlolehile.
S BAT / NC, C Hokela lisebelisoa tse nepahetseng tsa tsebiso ho litheminale ho tlaleha ho hloleha ha betri.
T E boloketsoe tšebeliso ea nako e tlang.
U Sehokedi sa 8-Pin Bakeng sa ho hokela VR6 kapa Tangos B.
V USB Khokahano ea laptop e nolofalletsa LINO8ACM(CB) ho seta le ho etsa lenaneo.
W RJ45 Ethernet: Khokahano ea LAN kapa ea laptop e thusa LINO8ACM(CB) lenaneo le ho lekola maemo.
X PWR1+, PWR2+ Li-plug [+] tse ntle bakeng sa lihokelo tsa likharafu.
Y Sehokedi sa 2-Pin Khokelo ho litheminale tsa [AC Fail] phepelong ea motlakase.
Z EOL Jumper E sebetsana le 10 kOhm End-of-Line resistor.

Lisebelisoa tsa LED

LED ON TLOA
LED 1- LED 8 (Khubelu) Li-relay li feletsoe ke matla. Li-relay tse hlahisoang li matlafalitsoe.
FACP Ho kenya FACP (boemo ba alamo). FACP e tloaelehileng (boemo boo e seng alamo).
Sephetho se Setala 1-8 12VDC –
Sephetho se Sefubelu 1-8 24VDC –
AC AC E hloleha AC Tloaelehile
BATHO Betri e hlolehile Betri e Tloaelehileng

Kenyeletso/Output Voltage Litekanyetso

Keletso Voltage le Mohloli Khumo Voltage Tekanyetso
5VDC (ho tloha ho VR6 regulator) 5VDC
12V (ho tloha ho VR6 regulator) 12VDC
12VDC (ho tloha phepelong ea matla a kantle) 11.7-12VDC
24VDC (ho tloha phepelong ea matla a kantle) 23.7-24VDC

Phaello e phahameng ka ho fetisisa ea Altronix Power Supplies

Phepelo ea Matla e thathamisitsoeng ka UL kapa e Tsebahalang Khumo Voltage Setting Max. Output Current
eFlow4NB 12VDC kapa 24VDC 4A
eFlow6NB 12VDC kapa 24VDC 6A
eFlow102NB 12VDC 10A
eFlow104NB 24VDC 10A
VR6 5VDC kapa 12VDC 6A

 Tango1B

12VDC le 24VDC

12VDC @ 5.4A le/kapa
24VDC @ 2.7A.
65W kakaretso.

Moqtage Regulator

Fetileview:

VR6 matlatage regulator e fetola tlhahiso ea 24VDC hore e be tlhahiso e laoloang ea 5VDC kapa 12VDC. E etselitsoe ho sebetsa le LINQ8ACM(CB) ka ho lumella ho beha Access Power Controller ka kotloloho holim'a VR6 ho boloka sebaka se koaletsoeng le ho nolofatsa likhokahano. Sheba Tataiso ea Tlhophiso ea VR6 Rev. 050517.

Litlhaloso:

Motlakase / Sephetho:

  • Kenyelletso: 24VDC @ 1.75A – Sephetho: 5VDC @ 6A.
  • Kenyelletso: 24VDC @ 3.5A – Sephetho: 12VDC @ 6A.

Sephetho

  • 5VDC kapa 12VDC e laoloang tlhahiso.
  • Lintlha tse hlahisoang ke 6A max.
  • Khatello e phahameng.

Lipontšo tsa LED:

  • Li-LED tse kenyang le tse hlahisoang.

Motlakase:

  • Mocheso o sebetsang: 0ºC ho isa ho 49ºC tikolohong.
  • Mongobo: 20 ho isa ho 93%, e sa fokotseng.

Mechini:

  • Boima ba sehlahisoa (hoo e ka bang): 0.4 lb (0.18 kg).
  • Boima ba ho romella (hoo e ka bang): 0.5 lb (0.23 kg).

Hokela LINQ8ACM(CB) ho VR6:

  1. Tlamella li-spacers tsa banna / basali (tse fanoeng) ho li-pem tse lumellanang le mohlala oa lesoba la VR6 sebakeng seo u se batlang. Sebelisa spacer ea tšepe bakeng sa lesoba le ntseng le phahama ka mokhoa oa linaleli (setšoantšo sa 3a, leqephe la 7).
  2. Hokela sehokelo sa lipini tse 8 tsa monna ho seketsoana sa 8-pin sa basali holim'a boto ea VR6 (Setšoantšo sa 3, leqephe la 7).
  3. Tlama li-spacers tsa basali / basali ho li-spacers tsa banna / basali (setšoantšo sa 3, leqephe la 7). Sebelisa li-spacers tsa tšepe holim'a sekoti se ntseng se phahama ka mokhoa oa linaleli (setšoantšo sa 3a, leqephe la 7).
  4. Lumellanya sehokelo sa banna ba 8-pin le sepokelo sa basali sa LINQ8ACM/LINQ8ACMCB, ebe u hokela boto ho li-spacers u sebelisa 5/16” likurufu tsa hlooho ea pan (setšoantšo sa 3, leqephe la 7).
  5. Hokela phepelo ea motlakase ea 24VDC ho terminal e tšoailoeng [+ PWR1 -] ea LINQ8ACM/LINQ8ACMCB (setšoantšo sa 3, leqephe la 7).
  6. Khetha bophahamo ba modumotage 5VDC kapa 12VDC e sebelisa switch [S1] ho VR6.
  7. Qetella mehato ea 4-10 (maq. 3-4).

Tango1B - PoE Driven Power Supply

Altronix Tango1B Moqtage Regulator e fetola tlhahiso ea IEEE802.3bt ea PoE hore e be 24VDC e laoloang le/kapa 12VDC tlhahiso ho fihla ho 65W. E felisa tlhoko ea molumo o phahamengtage phepelo ea motlakase ka hare ho sebaka se kampetsoeng. Sehokelo sa Tango 8-pin se lumella ho bokellana ka LINQ8ACM(CB), ho boloka sebaka sa bohlokoa se koaletsoeng. Sheba Tataiso ea Tlhophiso ea Tango1B Moruti TANGO-071119.

Litlhaloso:

Ethernet Input:

  • 802.3bt PoE ho fihla ho 90W kapa 802.3at ho fihla ho 30W kapa 802.3af ho fihla ho 15W.

Motlakase (ha o sebelisa 802.3bt 90W):

  • 12VDC ho fihla ho 5.4A (65W) le / kapa 24VDC ho fihla ho 2.7A (65W). Phaello e kopaneng e se ke ea feta 65W.
  • Ha o tjhaja dibetri: 12VDC ho fihlela ho 4.6A (55W) le / kapa 24VDC ho fihlela ho 2.3A (55W) Phallo e kopantsoeng e sa feteng 55W.

Ethernet Output:

  • Feta ka Ethernet Port (data feela).
  • 100/1G

Tlhokomelo:

  • Tahlehelo ea Kenyeletso ea PoE.
  • Tlhokomelo ea Battery.

Matšoao a bonoang:

  • Kenyelletso e supa phallo ea molumotage teng.
  • Boemo ba betri bo bontša boemo ba betri ea bothata.
  • PoE Class pontshi.
  • Tlholeho ea PoE kapa BAT Fail.

Likarolo tse Eketsehileng:

  • Tšireletso e khutšoanyane ea potoloho le tšireletso e feteletseng.
    Litekanyo tsa Boto (hoo e ka bang L x W x H): 7.625" x 4.125" x 1.25" (193.7mm x 104.8mm x 32.0mm)

E hokela LINQ8ACM(CB) ho Tango1B:

Ha LINQ8ACM(CB) e tsamaisoa ho tsoa ho Tango1B, Matla a phahameng a 90W ho tsoa ho lisebelisoa tsa ho fumana matla a PoE, boholo ba ho kenya letsohotage ho Tango1B ke 60V. Thepa ea ho fumana matla (PSE) e tla lumellana le Tekanyetso ea Lisebelisoa tsa Theknoloji ea Tlhahisoleseding - Tšireletseho - Karolo ea 1: Litlhoko tse Akaretsang, UL 60950-1, le/kapa Standard for Audio/Video, Information and Communication Technology Equipment - Karolo ea 1: Polokeho. Litlhoko, UL 62368-1, thepa e reretsoe ho ikamahanya le likarolo tse latelang tsa Khoutu ea Naha ea Motlakase, ANSI/NFPA 70:

  • Moo matla a fanoeng holim'a thapo ea likhokahano a leng ka tlase kapa a lekana le li-watts tse 60: Article 725.121, Mehloli ea Matla bakeng sa Lipotoloho tsa Sehlopha sa 2 le sa 3;
  • Moo matla a fepeloang holim'a thapo ea likhokahano a fetang 60 watts: Article 725.144, Transmission Power and Data.

Lisebelisoa tsa ho fumana matla ha lia rereloa ho behoa sebakeng sa kantle Sebaka sa PSE ea bohareng kapa ente ea motlakase. PSE ea bohareng kapa ente ea motlakase e ka fumaneha sebakeng leha e le sefe ka har'a mocha o hlophisitsoeng oa cabling o lumellanang le Standard for Balanced Twisted-Pair Telecommunications Cabling and Components, ANSI/ TIA-568-C.2, pakeng tsa sesebelisoa sa marang-rang le sesebelisoa se tsamaisoang ka matla. (PD). Litlhoko tsa li-cabling: Category 5E cabling ke karolo e fokolang ea ts'ebetso e khothaletsoang 'me e tlameha ho bontšoa litaelong tsa ho kenya lihlahisoa. Sehlopha sa ts'ebetso se sebelisitsoeng se lokela ho ts'oana le lebelo la phetisetso le hlokahalang sebakeng sa ho kenya. Bonyane gauge ea conductor e lumelletsoeng ho hokela lipakeng tsa PSE kapa ente ea motlakase le PD e tla ba 26 AWG (0.13 mm2) bakeng sa lithapo tsa patch; 24 AWG (0.21 mm) bakeng sa thapo e tshekaletseng kapa e phahamang. Boholo ba terata bo tla bontšoa litaelong tsa ho kenya. Thepa ea ho fumana matla e tla ba UL 294 le IEEE 802.3BT e tsamaellanang.

  1. Tlamella li-spacers tsa banna / basali (tse fanoeng) ho li-pem tse lumellanang le mohlala oa lesoba la Tango1B sebakeng se lakatsehang / sebaka se koaletsoeng (setšoantšo sa 4, leqephe la 9).
  2. Hokela sehokelo sa lipini tse 8 tsa monna ho seketsoana sa lipini tse 8 tsa basali botong ea Tango1B.
  3. Tlamella liphaephe tse tšehali/tsa basali. Sebelisa li-spacers tsa tšepe holim'a likoti tse ntseng li eketseha ka mokhoa oa linaleli (setšoantšo sa 4a, leqephe la 9).
  4. Lokisetsa sehokelo sa banna ba lipini tse 8 le seketsoana sa basali sa LINQ8ACM(CB), ebe u phahamisa.
  5. Hokela phepelo ea motlakase ea 24VDC ho theminale e tšoailoeng [+ PWR1 –] ea LINQ8ACM(CB). Kahoo Input 1 ea LINQ8ACM(CB) ke 24VDC ho tloha phepelong ea motlakase 'me Input 2 e khethoa ke litlhophiso tsa Tango1B (12VDC kapa 12VDC).
  6. Qetella mehato ea 4-10 (maq. 3-4)

Setšoantšo se Tloaelehileng sa Tšebeliso:

Lintlha tsa bohlokoa tse amanang le khomphutha e hokahaneng le lisebelisoa tsa puisano

Thepa ea ts'ebetso ea data le lisebelisoa tsa ofisi / tsa khoebo tse sebelisoang e le lisebelisoa tsa khomphutha li tla lumellana le Tekanyetso ea Lisebelisoa tsa Theknoloji ea Boitsebiso - Tšireletseho - Karolo ea 1: Litlhoko tse Akaretsang, UL 60950-1, kapa Standard for Audio/Video, Information and Communication Technology Equipment - Karolo ea 1: Litlhoko tsa Polokeho, UL 62368-1.

Tšireletso ea nakoana ea lisebelisoa tsa khomphutha e tlameha ho lumellana le Standard for Transient Voltage Surge Suppressors, UL 1449, e nang le lintlha tse phahameng tse tšoailoeng tsa 330V. Hape ts'ireletso ea nakoana e tlameha ho ikamahanya le Maemo a Basireletsi bakeng sa Khokahano ea Boitsebiso le Lipotoloho tsa Alamo ea Mollo, UL 497b, e nang le lintlha tse holimo tse tšoailoeng tsa 50V.

Li-circuits tsa puisano le likarolo tsa marang-rang tse hokahaneng le marang-rang a likhokahano li tla sireletsoa ke li-security tsa bobeli bakeng sa lipotoloho tsa puisano. Basireletsi bana ba tla ipapisa le Maemo a Basireletsi ba Bobeli ba Lipotoloho tsa Lipuisano, UL 497A. Litšireletso tsena li tla sebelisoa feela ka lehlakoreng le sirelelitsoeng la marang-rang a likhokahano. Ntle le phepelo ea mantlha ea motlakase le phepelo ea motlakase ea bobeli e lokelang ho fanoa seteisheneng se bohareng sa taolo, sistimi e tla fuoa phepelo ea motlakase e sa senyeheng (UPS) e nang le bokhoni bo lekaneng ba ho sebelisa lisebelisoa tsa komporo bonyane metsotso e 15. . Haeba ho hlokahala metsotso e fetang 15 bakeng sa phepelo ea motlakase ea bobeli ho fana ka motlakase oa UPS, UPS e tla khona ho fana ka matla a ho kenya bonyane nako eo. UPS e tla ipapisa le Maemo a Sesebediswa sa Phepelo ya Motlakase a sa Kgaoheng, UL 1778, kapa Tekanyetso ya Disebediswa tsa Matshwao a Tshireletso ya Mollo, UL 1481.

Tlhophiso ea Marang-rang:

Ka kopo etsa bonnete ba hore u etela altronix.com bakeng sa firmware ea morao-rao le litaelo tsa ho kenya.

Lenaneo la Marang-rang ka Khokahano ea USB ea Altronix Dashboard:

Khokahano ea USB ho LINQ8ACM(CB) e sebelisoa ho seta liparamente tsa marang-rang. Ha o hoketsoe ho PC ka thapo ea USB LINQ8ACM(CB) e tla fumana matla ho tsoa koung ea USB e lumellang mananeo a marang-rang a LINQ8ACM(CB) pele a hokeloa phepelong ea motlakase.

  1. Kenya software e fanoeng le LINQ8ACM(CB) ho PC e sebelisetsoang ho etsa mananeo.
    HLOKOMELA: Software ena e lokela ho kengoa lik'homphieutheng tsohle tse tla ba le phihlello ho LINQ8ACM(CB).
  2. Hokela thapo ea USB e fanoeng koung ea USB ho LINQ8ACM(CB) le komporong.
  3. Tobetsa habeli aekhoneng ea Dashboard ho komporo ea komporo ebe u bula Dashboard. Kenya Lebitso la Mosebelisi: admin le Password: admin ho fihlella dashboard.
  4. Tobetsa konopo e tšoailoeng USB Network Setup ka lehlakoreng le ka holimo la dashboard. Sena se tla bula skrine ea USB Network Setup. Skrineng sena Aterese ea MAC ea mojule oa LINQ8ACM(CB) e tla fumanoa hammoho le Litlhophiso tsa Marang-rang.

Litlhophiso tsa Marang-rang:

Sebakeng sa Mokhoa oa Aterese ea IP khetha mokhoa oo Aterese ea IP bakeng sa LINQ8ACM(CB) e tla fumanoa ka eona: "STATIC" kapa "DHCP", ebe u latela mehato e loketseng (ikopanye le molaoli oa marang-rang ho fumana hore na ke mokhoa ofe o tla sebelisoa) .

E tsitsitseng:

  • Aterese ea IP: Kenya aterese ea IP e abetsoeng LINQ8ACM(CB) ke mookameli oa marang-rang.
  • Subnet Mask: Kenya Subnet ea marang-rang.
  • Gateway: Kena heke ea TCP/IP ea sebaka sa phihlello sa marang-rang (router) e sebelisoang.
    HLOKOMELA: Tlhophiso ea heke ea hlokahala ho fumana mangolo-tsoibila hantle ho tsoa sesebelisoa.
  • Inbound Port (HTTP): Kenya nomoro ea boema-kepe e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo.
  • Tobetsa konopo e ngotsoeng Submit Network Settings. Lebokose la puisano le tla bontša "Litlhophiso tse ncha tsa marang-rang li tla qala ho sebetsa ka mor'a hore seva se tsosolosoe". Tobetsa OK

DHCP

  • Ka mor'a ho khetha DHCP tšimong ea Mokhoa oa Aterese ea IP, tobetsa konopo e ngotsoeng Submit Network Settings. Lebokose la puisano le tla bontša "Litlhophiso tse ncha tsa marang-rang li tla qala ho sebetsa ka mor'a hore seva se tsosolosoe". Tobetsa OK. E latelang, tobetsa konopo e ngotsoeng Reboot Server. Kamora ho qala bocha LINQ8ACM(CB) e tla hlophisoa ka mokhoa oa DHCP. Aterese ea IP e tla abeloa ke router ha LINQ8ACM(CB) e hokahane le marang-rang. Ho kgothaletswa ho boloka Aterese ya IP e abetsweng ho netefatsa phihlello e tswelang pele (sheba molaodi wa marang-rang).
  • Subnet Mask: Ha o sebetsa ho DHCP, router e tla abela litekanyetso tsa mask a subnet.
  • Gateway: Kena heke ea TCP/IP ea sebaka sa phihlello sa marang-rang (router) e sebelisoang.
  • Boema-kepe ba HTTP: Kenya nomoro ea boema-kepe ea HTTP e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 80. HTTP ha ea ngolisoa ebile ha ea sireletseha. Leha HTTP e ka sebelisoa bakeng sa phihlello e hole, e khothaletsoa haholo hore e sebelisoe le likhokahano tsa LAN.

Secure Network Setup (HTTPS):

E le ho theha HTTPS bakeng sa Khokahano e Sireletsehileng ea Marang-rang, ho tlameha ho sebelisoe Setifikeiti le Senotlolo se sebetsang. Litifikeiti le Senotlolo li tlameha ho ba ka sebopeho sa ".PEM". Litifikeiti tsa ho Itiisa li lokela ho sebelisoa feela molemong oa tlhahlobo kaha ha ho na netefatso ea 'nete e etsoang. Ka mokhoa oa ho Ikemela, khokahano e ntse e tla bolela hore ha e sireletsehe.

Mokhoa oa ho kenya Setifikeiti le Senotlolo sa ho Seta HTTPS:

  1. Bula Tab e Ngotsoeng Tšireletso.
  2. Khetha Tab e Ngotsoeng Email/SSL.
  3. Tsamaisetsa tlase tlasa Litlhophiso tsa SSL.
  4. Tobetsa Khetha Setifikeiti.
  5. Batla 'me u khethe Setifikeiti se nepahetseng seo u ka se kenyang ho tsoa ho seva.
  6. Tobetsa Kgetha Senotlolo.
  7. Sheba ebe u khetha Senotlolo se nepahetseng seo u ka se kenyang ho tsoa ho seva.
  8. Tobetsa Romela Files.

Hang ha Setifikeiti le Senotlolo li kentsoe ka katleho u ka tsoela pele ka ho theha HTTPS ho Litlhophiso tsa Marang-rang.

  • Boema-kepe ba HTTPS: Kenya nomoro ea boema-kepe ea HTTPS e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 443. Kaha e ngotsoe ka mokhoa o patiloeng ebile e bolokehile haholoanyane, HTTPS e khothaletsoa haholo bakeng sa phihlello e hole.
  • Tobetsa konopo e ngotsoeng Submit Network Settings. Lebokose la puisano le tla bontša "Litlhophiso tse ncha tsa marang-rang li tla qala ho sebetsa ka mor'a hore seva se tsosolosoe". Tobetsa OK.

Ho fihlella LINQ8ACM(CB) ka Altronix Dashboard, sheba Buka ea ho Kenyeletsoa le Lenaneo la Dashboard e fumanehang ho flash drive e fanoeng.

Lenaneo le Via Browser:

Ha o sa sebelise khokahano ea USB ea Altronix Dashboard bakeng sa ho seta Netweke ea pele, LINQ8ACM(CB) e hloka ho hokeloa ho phepelo efe kapa efe ea motlakase ea DC kapa phepelo ea motlakase ea eFlow e behoang leihlo pele ho lenaneo. Sheba Litaelo tsa Tlhophiso tsa LINQ8ACM(CB) leqepheng la 3 la bukana ena.

Litlhophiso tsa kamehla tsa feme:

  • IP Aterese: 192.168.168.168
  • Lebitso la mosebelisi: admin
  • Password: admin
  1. Beha aterese ea IP e sa fetoheng bakeng sa laptop e tla sebelisoa bakeng sa ho etsa mananeo ho aterese ea IP ea marang-rang joalo ka LINQ8ACM(CB), ke hore 192.168.168.200 (aterese ea kamehla ea LINQ8ACM(CB) ke 192.168.168.168).
  2. Hokela pheletsong e 'ngoe ea thapo ea marang-rang ho jack ea marang-rang ho LINQ8ACM(CB) le e' ngoe ho khokahanyo ea marang-rang ea laptop.
  3. Bula sebatli khomphuteng 'me u kenye "192.168.168.168" kahare ea aterese. Lebokose la lipuisano lea Hlokahala le tla hlaha le kopa lebitso la mosebelisi le password. Kenya litekanyetso tsa kamehla mona. Tobetsa konopo e ngotsoeng Log In.
  4. Leqephe la boemo la LINQ8ACM(CB) le tla hlaha. Leqephe lena le bonts'a boemo ba nako ea 'nete le bophelo bo botle ba phepelo e' ngoe le e 'ngoe ea motlakase e hokahantsoeng le LINQ8ACM(CB).

Ho kenya li-parameter tse ncha tsa marang-rang, ea ho Network Setup tlas'a karolo ea LINQ8ACM(CB) Configuration ea bukana ena.

Tlhophiso ea LINQ8ACM(CB):

Sebaka sa ID se sebelisetsoa ho khetholla sebaka le tlhaloso ea sesebelisoa se shebiloeng.

  1. Tobetsa tab ya Boemo ho fihlella leqephe la boemo.
  2. Tobetsa ho Setsi sa ID ka holimo ka ho le letšehali, lebokose la puisano le tla buleha.
  3. Kenya sebaka le tlhaloso ea sesebediswa leihlo.
  4. Tobetsa romela.

Nako le Letsatsi li tlameha ho behoa molemong oa ho nepahala stamp lintlha tsa tsamaiso le litlhokomeliso tsa imeile.

  1. Tobetsa tab ya Boemo ho fihlella leqephe la boemo.
  2. Tobetsa nako le letsatsi ka holimo ka ho le letšehali, lebokose la puisano le tla buleha.
  3. Tobetsa ho "SYNC DATE LE NAKO".

Tlhophiso ea Hardware:

Tobetsa tabeng ea Litlhophiso ho bula skrine ea Hardware Setup. Kenya / Output Setapo:

  1. Tobetsa ho tab ea INPUT / OUTPUT holimo skrineng.
  2. Output ID: Kenya lebitso le hlalosang bakeng sa sesebelisoa se amanang le tlhahiso e amanang.
  3. Taolo ea Liphetho: ho sebelisa menu ea ho hula, khetha hore na tlhahiso e tla laoloa ka ho kenya taolo ea phihlello ho li-terminals tsa trigger kapa software e laoloang.
    • Taolo ea ho Kena: liphetho li laoloa ka Trigger Input,
    • Taolo ea .Manual: liphetho li laoloa ka letsoho ka software ea LINQ. Lintho tse hlahisoang li tla laoloa ka sesebelisoa se qaliloeng ke software.
  4. E qalile: Ho hlahloba kapa ho hlakola lebokose le amanang le tlhahiso ho tla fetola tlhahiso ha konopo ea Submit e tobetse. Liphetho tse ngata li ka fetoloa ka nako e le 'ngoe.
    HLOKOMELA: Ts'ebetso ena haeba e sebelisoa ho Taolo ea Manual feela.
  5. Kenyelletso: tlhahiso e ka hlophisoa ho laola tlhahiso e le 'ngoe kapa lihlahisoa tse ngata.
    • Taolo e le 'ngoe ea tlhahiso: ho sebelisa lenane la ho hula la tlhahiso e tsamaellanang (ke hore Input1 g Output1), khetha mofuta oa taolo ea phihlello NO E buloa kapa NC e koetsoe ka tloaelo.
    • Taolo e ngata ea tlhahiso: ho sebelisa lenane la ho hulela fatše la liphetho tsohle tse lokelang ho laoloa (ke hore Input1 g Output1 g Output4 g Output7) khetha mofuta oa taolo ea phihlello NO Ka tloaelo e buloa kapa NC e koetsoe ka tloaelo. Liphetho tsohle tse khethiloeng li tla fetola boemo ha tlhahiso e qala.
  6. Mofuta oa tlhahiso: u sebelisa thebo ea ho hula, khetha hore na tlhahiso e tla sebelisoa joang: Fail-Safe (lisebelisoa tse hlokang ho notleloa), Fail-Sireletsehile (sesebelisoa se hloka matla a ho lokolla), kapa Thuso (lisebelisoa tse hlokang matla a sa fetoheng a sa fetoheng).
  7. FACP: u sebelisa tab ea ho hula, khetha hore na tlhahiso e tla itšoara joang ha alamo ea mollo e tlosoa: Ha e sebetse (sehlahisoa se tla lula se le teng), se sa ts'oarehe (se hlahisoang se tla lokolloa ha FACP e tsosolosoa), Latching (sehlahisoa se tla lula se le teng). ha FACP e seta bocha 'me e lula e ts'oaroa ho fihlela e lokolloa ka letsoho ho li-terminals tsa reset).
  8. Boloka Battery: khetha hore na tlhahiso e tla tšehetsoa ha ho ka etsahala hore motlakase o hlolehe. Tlosa lebokose le amanang le lona ho tima betri bakeng sa tlhahiso eo.
  9. Holimo/ Tlas'a Hona Joale: Kenya meeli ea hona joale ea Holimo le e Tlase bakeng sa tlhahiso e amanang. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
  10. Over/Under Voltage: Kena ka bobeli High le Tlase voltage meeli bakeng sa tlhahiso e amanang. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
  11. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso.

Litlhophiso tsa mocheso:

  1. Tobetsa tabeng ea Temperature holimo skrineng.
  2. Kenya moeli oa mocheso o phahameng ka Celsius.
  3. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso.

Letsatsi(ma)tshebeletso ea Betri:

Haeba libeteri li sa sebelisoe, hlakola lebokose le tlas'a Present ho tima betri ea leihlo.

  1. Tobetsa ho "Libetri" tab e ka holimo ho skrine.
  2. Kenya letsatsi leo libeteri li kentsoeng ka tlas'a Letsatsi la Kemiso bakeng sa phepelo e 'ngoe le e 'ngoe e hokeletsoeng.
  3. Kenya letsatsi la ts'ebeletso ea betri tlasa Letsatsi la Ts'ebeletso bakeng sa phepelo e 'ngoe le e 'ngoe e hoketsoeng.
    HLOKOMELA: Libetri li lokela ho hlahlojoa bonyane hang ka selemo. Leha ho lebeletsoe hore bophelo ba betri ke lilemo tse hlano (5) ho khothaletsoa ho khutlisa libeteri lilemo tse ling le tse ling tse nne (4).
  4. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso

Litlhophiso tsa Phepelo ea Matla:

Haeba ho sebelisoa phepelo ea motlakase e le 'ngoe feela (1) hlakola lebokose le tlas'a Present haufi le phepelo ea motlakase e sa sebelisoeng ho tima ho beha leihlo.

  1. Tobetsa ho "Power Supplies tab" e kaholimo ho skrine.
  2. Over/Under Voltage: Kenya bobeli ba Holimo le Tlasetage meeli bakeng sa ho kenya letsoho. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
  3. Holimo / Tlas'a Hona Joale: Kenya meeli ea hona joale e Phahameng le e Tlase bakeng sa kenyeletso e amanang. Haeba e 'ngoe ea meeli ena e fetisitsoe molaetsa oa tlhokomeliso le/kapa tsebiso ea lengolo-tsoibila e tla hlahisoa.
  4. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso

Phetoho ea Hona Joale:

Nakong ea tlhophiso ea pele, liphetho tsohle li hloka ho lekanyetsoa ho netefatsa hore na ho baloa ho nepahetseng hona joale.

  1.  Tobetsa tabeng ea Calibration holimo skrineng.
  2. Ha mejaro eohle e khaotsoe, tlanya ho tab e ngotsoeng Calibrate All Zero Offset Currents ho beha maqhubu ohle ho zero.
  3.  Ho hokela tlhahiso e 'ngoe le e 'ngoe ka nako, lekanya toro ea hona joale 'me u kenye boleng bona bakeng sa tlhahiso ena tlasa Actual.
  4. Tobetsa konopo e ngotsoeng Calibrate Gain ho boloka litlhophiso.
  5.  Pheta mehato ea 3 & 4 bakeng sa liphetho tsohle tse setseng.

Ha o kenya kapa o kenya sesebelisoa se secha, tlhahiso e hloka ho lekanyetsoa bocha.

  1. Tobetsa tabeng ea Calibration holimo skrineng.
  2. Ha mojaro o khaotsoe ho tsoa, ​​tobetsa ho tab e ngotsoeng Calibrate Offset hore tlhahiso e behe ea hona joale ho zero.
  3. Hokela sephetho, lekanya palo ea hajoale 'me u kenye boleng bona tlasa 'Nete.
  4. Tobetsa konopo e ngotsoeng Calibrate Gain ho boloka litlhophiso.
  5. Pheta mehato ea 3 & 4 bakeng sa liphetho tsohle tse setseng.

Tlhophiso ea Nako:

Tobetsa ho "Timers tab" ho fihlella skrineng sa ho seta nako.

  1. Tobetsa ho Add New Timer bar.
  2. Leibole ea Nako: Kenya lebitso le hlalosang bakeng sa ts'ebetso ea nako.
  3. Letsatsi la ho Qala la Nako: Kenya letsatsi leo tšebetso ea nako e tla qala ka lona (ke hore, 10/09/2019).
  4. Nako ea nako: U sebelisa menyetla ea ho hula, khetha nako eo nako e tla sebetsa ka eona.
  5. Nako ea ho Qala Nako: kenya nako eo ketsahalo ea nako e tla qala.
  6. Liketso tsa Nako: Khetha mosebetsi bakeng sa tlhahiso e 'ngoe le e' ngoe e tla etsahala nakong ea ketsahalo ea nako.
  7. Tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso.
    Ho eketsa liketsahalo tse ling tsa nako, pheta mehato ea 1-7.

Tlhophiso ea Marang-rang:

  1. Tobetsa ho TCP/IP tab ho fihlella skrineng sa litlhophiso tsa IP.
  2. Tobetsa ho "Configure IP Settings" tab ya ka holimo ho skrine ho fihlella ho seta IP.
  3. Sebakeng sa Method sebelisa menu ea ho hula khetha mokhoa oo Aterese ea IP bakeng sa LINQ8ACM(CB) e tla fumanoa: "Static" kapa "DHCP", ebe u latela mehato e nepahetseng e ka tlase.

E tsitsitseng:

  • Aterese ea IP: Kenya aterese ea IP e abetsoeng LINQ8ACM(CB) ke molaoli oa marang-rang.
  • Subnet Shorts: Kenya Subnet ea marang-rang.
  • Gateway: Kenya monyako oa TCP/IP oa sebaka sa phihlello sa marang-rang (router) e sebelisoang. Tlhophiso ea heke ea hlokahala ho fumana mangolo-tsoibila hantle ho tsoa sesebelisoa.
  • Boema-kepe ba HTTP: Kenya nomoro ea boema-kepe ea HTTP e abetsoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 80. HTTP ha ea ngolisoa ebile ha ea sireletseha. Leha HTTP e ka sebelisoa bakeng sa phihlello e hole, e khothaletsoa haholo hore e sebelisoe le likhokahano tsa LAN.
  • Port ea HTTPS: Kenya nomoro ea boema-kepe ea HTTPS e abetsoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 443. Kaha e ngotsoe ka mokhoa o patiloeng ebile e bolokehile haholoanyane, HTTPS e khothaletsoa haholo bakeng sa phihlello e hole. Ha HTTPS e sebelisoa ho khothaletsoa ho hlakola lebokose le haufi le HTTP ho thibela tšebeliso ea eona.
  • Ha likarolo tsohle li phethiloe, tobetsa konopo e ngotsoeng Submit.
  • Tobetsa konopo e ngotsoeng Reboot ho boloka litlhophiso.

DHCP

  • Kamora ho khetha DHCP tšimong ea Method, tobetsa konopo e ngotsoeng Submit. E latelang, tobetsa konopo e ngotsoeng Reboot ho boloka litlhophiso. Kamora ho qala bocha LINQ8ACM(CB) e tla hlophisoa ka mokhoa oa DHCP. Aterese ea IP e tla abeloa ke router ha LINQ8ACM(CB) e hokahane le marang-rang. Sheba molaoli oa marang-rang bakeng sa liparamente tsa DHCP.
  • Subnet Mask: Ha o sebetsa ho DHCP router e tla abela boleng ba mask a subnet.
  • Khoro: Khoro ea TCP/IP ea sebaka sa phihlello sa marang-rang (router) e sebelisoang e tla hlahisoa.
  • HTTP Port: Kenya nomoro ea boema-kepe ea HTTP e fuoeng mojule oa Linq8ACM ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Litlhophiso tsa kamehla tsa boema-kepe ke 80. HTTP ha ea ngolisoa ebile ha ea sireletseha. Leha HTTP e ka sebelisoa bakeng sa phihlello e hole, e khothaletsoa haholo hore e sebelisoe le likhokahano tsa LAN.
  • Boema-kepe ba HTTPS: Kenya nomoro ea boema-kepe ea HTTPS e fuoeng mojule oa LINQ8ACM(CB) ke molaoli oa marang-rang ho lumella ho fihlella le ho beha leihlo. Boemo bo sa feleng ba boema-kepe bo kentsoeng ke 443. Kaha e patiloe ebile e sireletsehile haholoanyane, HTTPS e khothaletsoa haholo bakeng sa phihlello e hole.
  • Ha likarolo tsohle tsa tlatsetso li phethiloe, tobetsa konopo e ngotsoeng Submit.
  • Tobetsa konopo e ngotsoeng Reboot ho boloka litlhophiso.

Litlhophiso tsa Cloud:

Tšehetso ea leru ea LINQ8ACM(CB) e emisitsoe ka ho sa feleng. Ha tšehetso ea leru e lumelletsoe, LINQ8ACM(CB) e tla sebelisa tšehetso ea leru ho fana ka litsebiso tsa lengolo-tsoibila le ho fana ka lintlafatso ha li le teng. Tšoaea lebokose le haufi le Numella ho lumella litemoso tsa lengolo-tsoibila tsa ketsahalo ka tšehetso ea leru.

Litlhophiso tse tsoetseng pele:

Sephethephethe sa marang-rang sa Cloud se ka fetisetsoa ho li-server tsa lehae haeba ho hlokahala.

  1. Kenya aterese ea IP ea seva ea leru sebakeng sa Aterese ea IP.
  2. Kenya pro ID sebakeng sa Port.
  3. Sheba lebokoseng le haufi le Enable.
  4. Tobetsa konopo e ngotsoeng Submit ho boloka setting.
    Ha o sebelisa seva sa lehae mme SSL/TLS e sebetsa, setifikeiti se secha se tla hloka ho kenngoa.

Kemiso ea Setifikeiti:

  1.  Tobetsa tabeng ea Setifikeiti ka holimo ho skrine.
  2. Tobetsa ho Khetha Setifikeiti File le ho fumana setifikeiti se secha.
  3. Kenya setifikeiti.
  4. Tobetsa konopo e ngotsoeng Submit to save the file.

Tlhophiso ea lengolo-tsoibila:

  1. Tobetsa tab ya Imeile ho fihlella skrineng sa di-setting tsa imeile.
  2. Tobetsa ho thebo ea Outgoing ho fihlella skrineng sa Litlhophiso tsa Imeile tse tsoang.
  3. Kenya liaterese tse tsoang ho tse hlano (5) tse tla fumana litemoso tsa lengolo-tsoibila.
  4. Hang ha li-imeile tsohle li kenyelitsoe, tobetsa konopo ea Submit ho boloka litlhophiso.

Teko ea lengolo-tsoibila:

  1. Tobetsa tabeng ea Teko ho fumana skrine ea Tlhahlobo ea Imeile.
  2. U sebelisa menu ea ho hula, khetha molaetsa oa teko o tla romelloa.
  3. Tobetsa konopo ea Submit hore u romelloe molaetsa oa teko.

Litlhophiso tsa Ts'ireletso ea Netweke:

  1. Tobetsa tab ya Tshireletso ho fihlella skrineng sa Litlhophiso tsa Ts'ireletso.
  2. Tobetsa tab e loketseng ka holimo ho skrine bakeng sa libaka tse lokelang ho hlophisoa.

Maano:

Khetha temoso ea ts'ireletso e tla hlahisoa ha u kena ka har'a sistimi ka ho sheba ho bonts'a le ho hlakola ho se hlahise molaetsa oa temoso.

Tlhophiso ea Setifikeiti sa Boithaopo:

Ho hlahisa Setifikeiti le Senotlolo sa SSL se ingoletseng:

  1. Naha: Litlhaku tse peli tse emelang naha eo mokhatlo o leng ho eona.
  2. Sebaka: Motse oo mokhatlo o leng ho oona.
  3.  Mokhatlo: Lebitso la molao la mokhatlo. Sena ha sea lokela ho khutsufatsoa, ​​'me se tlameha ho kenyelletsa li-suffixes tse kang Inc., Corp, kapa LLC.
  4. Unit Name: Lebitso la sesebelisoa.
  5. Lebitso le Tloaelehileng: Lebitso la domain kapa aterese ea IP ea seva. Hangata sena se fanoa ke mookameli oa marang-rang.
  6. Aterese ea lengolo-tsoibila: Aterese ea lengolo-tsoibila e sebelisoang ho ikopanya le mokhatlo.
  7. Ka mor'a hore karolo eohle e phethoe, tobetsa konopo e ngotsoeng " Submit to save setting".

HLOKOMELA: Setifikeiti sa SSL se itekenetseng se tla hlahisoa ka lintlha tse fanoeng libakeng tsa "SSL Certificate Settings". Setifikeiti se tla sebetsa matsatsi a 500, le nako stamped le litlhophiso tsa nako tse teng mojuleng oa LINQ8ACM(CB). Letsatsi le nako li tlameha ho hokahanngoa le komporo ea moamoheli pele o hlahisa setifikeiti sa SSL.

Kemiso ea Setifikeiti:

Ho kenya Setifikeiti sa poraefete le Senotlolo.

  1. Tlas'a Setifikeiti se kentsoeng, tobetsa ho Khetha Setifikeiti File.
  2. Fumana setifikeiti se secha file.
  3. Kenya setifikeiti file.
  4. Tlas'a Key upload, tobetsa ho Khetha Key File.
  5. Fumana setifikeiti se secha file.
  6. Kenya Senotlolo file.
  7. Tobetsa konopo e ngotsoeng Submit file boloka se

Litlhophiso tsa mosebelisi:

Ho na le maemo a 'maloa a ka sebelisoang a fumanehang.

Motsamaisi: E na le phihlello ea lits'ebetso tsohle.
Boemo/Peakanyo: E na le taolo ea ho tima/e tima 'me e ka reha thepa ea motlakase bocha.
Network: Sena tlhophiso ke ea batsamaisi ba IT.
Tlhokomelo: E na le monyetla oa ho fetola Litsebiso le taolo ea nako.

Ho theha Basebelisi:

  1. Tobetsa tab ya Users.
  2. Tobetsa ho Eketsa konopo ea mosebelisi e mocha Foromo e Ncha ea Mosebelisi e tla buleha.
  3. Kenya Lebitso la mosebedisi.
  4. Kenya phasewete e ikhethang tlasa Password e Ncha.
  5. Kenya phasewete hape tlasa Confirm Password.
  6. Khetha mofuta oa mosebelisi le litokelo tseo mosebelisi a nang le tsona: Bala/Ngola (a ka etsa liphetoho) kapa Bala Feela (view feela). Mosebelisi a ka hlophisoa joalo ka molaoli ka ho tobetsa ETSA ADMIN ka holimo ho konopo ea Romela.
  7. Tobetsa ho Submit ho boloka litlhophiso.
  8. Pheta se ka holimo ho eketsa basebelisi ba eketsehileng.

Litlhokomeliso le Litlhophiso tsa ho lieha ho tlaleha:

Litemoso li ka lumelloa ho romella tsebiso ea hore ketsahalo e etsahetse kapa e koetsoe ho iphapanyetsa ketsahalo eo le ho se romelle tsebiso.

Ho thibela ketsahalo, hlakola lebokose la Numella le haufi le ketsahalo e tla tima. Ho bulela ketsahalo hape, sheba lebokose le haufi le bosiu

Liketsahalo li ka hlophisoa hore li liehe pele li tlaleha.

Ho seta tieho ea tlaleho, kenya nako ea tieho kholomong tlasa Delay Report bakeng sa ketsahalo e amanang. Nako ea ho lieha e behiloe ka metsotsoana. Liketsahalo tsohle li reriloe esale pele bakeng sa metsotsoana e 2. Hang ha likarolo tsohle li phethiloe, tobetsa konopo e ngotsoeng Submit ho boloka litlhophiso tsa ketsahalo. Pheta hore liketsahalo tse ling kaofela li hlophisoe.

Litšoantšo tsa Hook-Up:

Setšoantšo sa 6 - Daisy-ketane e le 'ngoe kapa ho feta LINQ8ACM(CB) yuniti.
EOL Jumper [EOL JMP] (Setšoantšo sa 5, leqephe la 5, Z) se lokela ho kenngoa sebakeng sa "EN". Non Latching.

Setšoantšo sa 7- Daisy-chaining yuniti e le 'ngoe kapa ho feta LINQ8ACM(CB). EOL Jumper [EOL JMP] (Setšoantšo sa 5, leqephe la 5, Z) se lokela ho kenngoa sebakeng sa "EN". Latching Single Reset.

Setšoantšo sa 8 - Daisy e kopanya yuniti e le 'ngoe kapa ho feta LINQ8ACM(CB). EOL Jumper [EOL JMP] (Setšoantšo sa 5, leqephe la 5, Z) se lokela ho kenngoa sebakeng sa "EN". Latching Individual Reset.

Setšoantšo sa 9 - Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo). E sa Lateng.

Hokela

Setšoantšo sa 10- Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo). Latching.

Hokela

Setšoantšo sa 11- Ka tloaelo ho Koalehile ho kenya liqhomane (Ha li Latching)

Hokela

Setšoantšo sa 12- Ka tloaelo ho Koetsoe ho kenya trigger (Latching).

Hokela

Setšoantšo sa 13- Ka tloaelo Open trigger input (Non-Latching).

Hokela

Setšoantšo sa 14- Ka tloaelo Open trigger input (Latching).

Hokela

Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical.
140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fekse: 718-567 9056
websebaka: www.altron

Letšoao

Litokomane / Lisebelisoa

LINQ LINQ8ACM Series "Network Access Power Controller", 8 PTC [pdf] Buka ea Taelo
LINQ8ACM Series Network Access Power Controller, 8 PTC, LINQ8ACM Series, Network Access Power Controller 8 PTC, Power Controller 8 PTC, Controller 8 PTC

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *