I-goobay 60269 izibane zentambo ze-LED ezineTimer
Iinkcukacha
| Inombolo yenqaku | 60269 | 60273 | 60274 | 60332 |
| Ukusebenza ivoltage | 3.0 V  |
|||
| Amanani ee-LED (pcs.) | 10 | 20 | ||
| Umbala okhanyayo | shushu-mhlophe | |||
| Ubushushu bombala | 3000 K | |||
| Ukusetyenziswa kwamandla kwi-LED nganye Ukukhanya okukhanyayo kwi-LED nganye | I-0.04 W 5 lm | |||
| Ubomi obuqhelekileyo | 10000 h | |||
| Umbala | pink enothuli, bomvu, mhlophe, igolide, isilivere |
mhlophe, elubala |
mdaka, luhlaza, obomvu, omnyama obomvu, ubhedu |
elubala, isilivere |
| Izinto eziphathekayo | iplastiki, umqhaphu, ubhedu |
iplastiki, p, ubhedu |
iplastiki, amapolisa ngokwe, ngokwendalo iipine |
iplastiki, ubhedu |
| Inqanaba lokhuseleko | IP20 | |||
| Ubude obupheleleyo betsheyini yokukhanya Ubude bomgca wesondlo Isithuba phakathi kwee-LEDs Imilinganiselo yamacandelo okuhlobisa |
120cm 30cm 10cm 1.1 - 7 cm |
315cm 30cm 15cm 3 x 3 cm |
220cm 30cm 10cm 1.4 - 5 cm |
220cm 30cm 10cm 1.4 x 1.4 cm |
| Imilinganiselo yendawo yebhetri | 80 x 32 x 18 mm | |||
| Ubunzima | 57 g | 62 g | 168 g | 27 g |
| Iibhetri (azifakwanga kumda wokuhanjiswa) | ||||
| Uhlobo lweVoltage | AA (Mignon) | |||
| 1.5 V |
||||
| Ubungakanani | 2 | |||
Iimpawu ezisetyenzisiweyo
| Ukusetyenziswa ngaphakathi kuphela | IEC 60417-5957 |  |
| Ngqo ngoku | IEC 60417-5031 | |
Imiyalelo yokhuseleko
Nje
Incwadi yomsebenzisi yinxalenye yemveliso kwaye iqulethe ulwazi olubalulekileyo lokusetyenziswa ngokuchanekileyo.
- Funda incwadi yomsebenzisi ngokupheleleyo nangenyameko phambi kokuba uyisebenzise.
Incwadi yomsebenzisi kufuneka ifumaneke ngokungaqiniseki kwaye igqithise imveliso.
- Gcina le ncwadana yomsebenzisi.
- Musa ukuyivula indlu.
- Musa ukuguqula imveliso kunye nezixhobo.
Ikhonkco lokukhanya kwe-LED akufuneki liqhagamshelwe ngombane kwamanye amatyathanga okukhanya.
- Musa imidibaniso yeesekethe ezimfutshane kunye neesekethe.
- Sebenzisa imveliso, iinxalenye zemveliso kunye nezixhobo kuphela kwimeko egqibeleleyo.
Ukuba kukho nawuphi na umonakalo, imveliso kufuneka ingasasetyenziswa! Iibhalbhu zeli khonkco lokukhanya azinakutshintshwa!
- Kulumkele uxinzelelo olunjengobushushu nokubanda, ukufuma kunye nelanga elithe ngqo, ii-microwaves, ii-vibrations kunye noxinzelelo lomatshini.
- Kwimeko yemibuzo, iziphene, umonakalo womatshini, inkathazo kunye nezinye iingxaki, ezingenakuhlawuleka ngamaxwebhu, qhagamshelana nomthengisi okanye umvelisi wakho.
Ayenzelwanga abantwana. Imveliso ayikho into yokudlala!
- Ukupakishwa okukhuselekileyo, iindawo ezincinci kunye nokugquma ngokuchasene nokusetyenziswa ngengozi.
Le nto ayifanelekanga ukukhanya kwegumbi. Yenzelwe iinjongo zokuhlobisa kuphela.
- Gcina ikhonkco lokukhanya le-LED kude nezinto ezibukhali.
- Musa ukufaka naziphi na izinto kumtya wokukhanya we-LED.
- Musa ukusebenzisa intambo yokukhanya kwe-LED ngaphakathi kwepakethe.
Musa ukuvumela nawaphina amalungu eyunithi ukuba adibane nobushushu okanye ilangatye.
- Qinisekisa ukuba iintambo zikhululekile kwaye azisolulwanga.
Ngaphandle koko kukho umngcipheko wokuqhekeka kwentambo.
- Hambisa intambo ngokukhuselekileyo.
Umngcipheko wokwenzakala ngokukhubeka kunye nokuwa.
Iibhetri
- Musa ukuxuba iibhetri ezindala kunye ezintsha.
- Sebenzisa kuphela iibhetri zohlobo olufanayo okanye olulinganayo njengoko kucetyiswa.
- Musa ukuxuba i-alkaline, i-carbon zinc okanye ibhetri ye-nickel cadmium.
- Susa iibhetri ezivuzayo, ezonakeleyo okanye ezidlekileyo kwimveliso kwaye uzilahle ngokhuseleko olufanelekileyo.
- Musani ukuphosa emlilweni.
Inkcazo kunye nomsebenzi
Imveliso
Itsheyini yokukhanya ye-LED esebenza ngebhetri njengokuhombisa umoya wokusetyenziswa ngaphakathi.
- Ngomsebenzi wesibali-xesha-iiyure ezi-6 zivuliwe/iiyure ezili-18 zivaliwe, tshintsha ngezithuba ezi-3- IVULIWE/YIVILE/I-Timer
- Ibhetri iyasebenza (2 x AA, ayiqukwanga)
Ubungakanani bonikezelo
60269: Izibane zeSilivere zocingo "Iibhola kunye neeRibhoni" ezine-LED ze-10, Incwadi yoMsebenzisi
60273: Izibane zentambo "Ibhola leqhwa" elinee-LED ze-20, Incwadi yoMsebenzisi
60274: Izibane zocingo zeSilver “Pine Cones & Red Berries” ezine-20 LEDs, Incwadi Yomsebenzisi
60332: Izibane zeSilver Wire "Iinkwenkwezi" ezinee-LED ezingama-20, Incwadi Yomsebenzisi
Izinto zokusebenza
- Indawo yebhetri
- TIMER/ON/OFF iswitshi
Ukusetyenziswa okucetywayo
Le mveliso ilungiselelwe kuphela ukusetyenziswa kwangasese kunye nenjongo yayo. Le mveliso ayenzelwanga ukusetyenziswa kwezorhwebo. Asikuvumeli ukusebenzisa isixhobo ngezinye iindlela ezichazwe kwisahluko "Inkcazo kunye noMsebenzi" okanye "kwiMiyalelo yoKhuseleko". Sebenzisa imveliso kuphela kumagumbi angaphakathi owomileyo. Ukungahoyi le migaqo kunye nemiyalelo yokhuseleko kunokubangela iingozi ezibulalayo, ukwenzakala, nomonakalo ebantwini nakwimpahla.
IP20: Le mveliso ikhuselwe kwizinto zangaphandle ezinobungakanani obuphakathi, kodwa hayi ngokuchasene nokungena kwamanzi.
Ukulungiselela
- Jonga umda wokuhanjiswa kokugqibelela kunye nokuthembeka.
Uqhagamshelwano kunye nokusebenza
Ugunyaziso
- Ukusabalalisa imveliso ngokupheleleyo.
- Slayida indawo yebhetri ivule kwicala lotolo.
- Faka iibhetri ezi-2 ezintsha kwindawo yebhetri, ujonge i-polarity ye-plus kunye ne-minus.
- Shelelisela isigqubuthelo sendawo yebhetri umva kwindawo yebhetri ngokuchasene necala lotolo.
- Lixhome ikhonkco lokukhanya.
Isibali-xesha
- Slayida i-TIMER/ON/OFF iswitshi (2) kwindawo ethi "Isibali-xesha".
Ukuba isibali-xesha siyasebenza, ikhonkco lokukhanya le-LED licima ngokuzenzekelayo emva kweeyure ezi-6 kwaye livule kwakhona emva kwezinye iiyure ezili-18. Ukuba isibali-xesha esisetiweyo asitshintshwanga, ikhonkco lokukhanya le-LED livula kwaye licime ngaxeshanye yonke imihla.
Ukuvula nokuvala
- Slayidela i-TIMER/ON/OFF iswitshi (2) kwindawo ethi "ON" ukuze uvule isibane sesibane se-LED.
- Slayida isitshixo se-TIMER/ON/OFF (2) kwindawo ethi "Cima" ukuze ucime isibane sesibane se-LED.
ULondolozo, uKhathalelo, uGcino kunye noThutho
Imveliso ayinakugcinwa.
ISAZISO! Umonakalo wezinto eziphathekayo
- Sebenzisa kuphela ilaphu elomileyo nelithambileyo xa ucoca.
- Musa ukusebenzisa izinto zokucoca okanye iikhemikhali.
- Gcina imveliso kwindawo engafikelelekiyo ebantwaneni nakwindawo eyomileyo nekhuselwe ngothuli xa ingasetyenziswa.
- Susa iibhetri / iibhetri ezinokutshajwa kwakhona xa zingasetyenziswa.
- Gcina upholile kwaye womile.
- Gcina kwaye usebenzise ipakethe yokuqala yokuthutha.
Imiyalelo yokulahla
Ngokomyalelo we-WEEE yaseYurophu, izixhobo zombane neze-elektroniki akufunekanga zilahlwe yinkunkuma yabathengi. Amalungu ayo kufuneka ahlaziywe okanye alahlwe ngokwahlukileyo omnye komnye. Kungenjalo izinto ezingcolisayo neziyingozi zingonakalisa impilo kwaye zingcolise okusingqongileyo. Njengomthengi, uzibophelele ngokomthetho ukulahla izixhobo zombane neze-elektroniki kumvelisi, umthengisi, okanye iindawo zokuqokelela zikawonke-wonke ekupheleni kwesixhobo kubomi bonke simahla. Iinkcukacha zilawulwa ngamalungelo esizwe. Isimboli kwimveliso, kwincwadi yomsebenzisi, okanye kwipakethe ibhekisa kule migaqo. Ngolu hlobo lokwahlulwa kwenkunkuma, ukusetyenziswa, kunye nokulahlwa kwenkunkuma yezixhobo ezisetyenzisiweyo ufezekisa isabelo esibalulekileyo kukhuseleko lokusingqongileyo. Inombolo ye-WEEE: 82898622
Amaxwebhu / Izibonelelo
 |
I-goobay 60269 izibane zentambo ze-LED ezineTimer [pdf] Incwadi yokusebenzisa Izibane ze-60269 ze-LED ezineTimer, 60269, izibane ze-LED ezineTimer, izibane zeentambo ezineTimer, izibane ezineTimer. |
