I-CrowPanel ESP32 Bonisa i-LCD ye-Touch Screen iyahambelana
Iinkcukacha
- Ubungakanani: 2.4″, 2.8″, 3.5″, 4.3″, 5.0″, 7.0″
- Isigqibo: Iyahluka ngokobukhulu
- Isimbo sokuchukumisa: I-Resistive Touch (2.4″, 2.8″, 3.5″), iCapacitive Touch (4.3″, 5.0″, 7.0″)
- Iprosesa ephambili: Iyahluka ngokwemodeli
- Ukuphindaphinda: 240 MHz
- Ifleshi: 4MB
- I-SRAM: 520KB – 512KB
- I-ROM: 448KB – 384KB
- I-PSRAM: 8MB, 2MB
- Bonisa Umqhubi: ILI9341V, ILI9488, NV3047,\ ILI6122 & ILI5960, EK9716BD3 & EK73002ACGB
- Uhlobo lweSkrini: TFT
- Ujongano: Iyahluka ngokobukhulu
- Isithethi sikaJack: EWE
- Indawo yekhadi le-TF: EWE
- Indawo esebenzayo: Iyahluka ngokobukhulu
Imiyalelo yokusetyenziswa kwemveliso
Iziqulatho zePakethe:
Qinisekisa ukuba iphakheji iqulethe: Isiboniso se-ESP32, Incwadi yoMsebenzisi, i-USB-A\ ukuya kwiCable-C yeCrowtail, iCrowtail/Grove to 4pin DuPont Cable, Resistive Touch Pen (engabandakanywanga ne-5-intshi kunye ne-7-intshi yokubonisa).
2. Amaqhosha eSkrini kunye neNdibaniselwano:
Jonga kwiscreen sesilika esibhalwe ujongano kunye namaqhosha akwimveliso eyiyo ngereferensi.
3. Imiyalelo yoKhuseleko:
- Kuphephe ukuveza isikrini kukukhanya kwelanga okanye imithombo yokukhanya eyomeleleyo.
- Kuphephe ukucofa okanye ukungcangcazelisa isikrini xa usebenzisa.
- Ukuba ufumana ukungasebenzi kakuhle kwesikrini, funa ukulungiswa kwengcali.
- Cima umbane kwaye uqhawule kwisixhobo phambi kokuba ulungise okanye utshintshe izinto.
Imibuzo ebuzwa qho
Umbuzo: Ngaba zonke iimodeli ziza nepeni yokuchukumisa yokuthintela?
A: Hayi, kuphela iimodeli ezingaphantsi kwe-intshi ezi-5 azizi kunye nepeni yokuthintela.
Enkosi ngokuthenga imveliso yethu. Nceda ufunde le ncwadana yomsebenzisi ngononophelo phambi kokuba uyisebenzise kwaye uyigcine ngokufanelekileyo ukuze uyisebenzise kwixesha elizayo
Uludwe Lwephakheji
Olu luhlu lulandelayo lomzobo lwenzelwe ireferensi kuphela. Nceda ubhekisele kwimveliso yokwenene ngaphakathi kwiphakheji ngeenkcukacha
Inkangeleko yesikrini iyahluka ngokwemodeli, kwaye imizobo yeyereferensi kuphela. Ujongano kunye namaqhosha abhalwe isikrini sesilika, sebenzisa imveliso yokwenyani njengereferensi
ESP32 Bonisa 2.4 intshi
ESP32 Bonisa 2.8 intshi
ESP32 Bonisa 3.5 intshi
ESP32 Bonisa 4.3 intshi
ESP32 Bonisa 5.0 intshi
ESP32 Bonisa 7.0 intshi
Iiparamitha
| Ubungakanani | 2.4″ | 2.8″ | 3.5″ |
| Isigqibo | 320*240 | 320*240 | 480*320 |
| Uhlobo lokuchukumisa | Ukubamba okuxhathisayo | Ukubamba okuxhathisayo | Ukubamba okuxhathisayo |
| Iprosesa ephambili | ESP32-WROOM-32-N4 | ESP32-WROOM-32-N4 | ESP32-WROVER-B |
|
Ukuphindaphinda |
240 MHz |
240 MHz |
240 MHz |
|
Flash |
4MB |
4MB |
4MB |
|
SRAM |
520 KB | 520 KB | 520 KB |
| i-ROM | 448 KB | 448 KB | 448 KB |
| I-PSRAM | / | / | 8MB |
| Bonisa Umqhubi | ILI9341V | ILI9341V | ILI9488 |
|
Uhlobo lweSkrini |
TFT | TFT | TFT |
| Ujongano | 1*UART0, 1*UART1,
1*IIC, 1*GPIO, 1*Ibhetri |
1*UART0, 1*UART1,
1*IIC, 1*GPIO, 1*Ibhetri |
2*UART0, 1*IIC,
1*GPIO, 1*Ibhetri |
| Isithethi sikaJack | EWE | EWE | EWE |
| Indawo yeKhadi le-TF | EWE | EWE | EWE |
| Indawo esebenzayo | 36.72*48.96mm(W*H) | 43.2*57.6mm(W*H) | 48.96*73.44mm(W*H) |
| Ubungakanani | 4.3″ | 5.0″ | 7.0” |
| Isigqibo | 480*272 | 800*480 | 800*480 |
| Uhlobo lokuchukumisa | Ukubamba okuxhathisayo | Capacitive Touch | Capacitive Touch |
| Iprosesa ephambili | ESP32-S3-WROOM-1- N4R2 | ESP32-S3-WROOM-1- N4R8 | ESP32-S3-WROOM-1- N4R8 |
|
Ukuphindaphinda |
240 MHz |
240 MHz |
240 MHz |
|
Flash |
4MB |
4MB |
4MB |
|
SRAM |
512 KB | 512 KB | 512 KB |
| i-ROM | 384 KB | 384 KB | 384 KB |
| I-PSRAM | 2MB | 8MB | 8MB |
| Bonisa Umqhubi | NV3047 | ILI6122 & ILI5960 | EK9716BD3 &
EK73002ACGB |
|
Uhlobo lweSkrini |
TFT | TFT | TFT |
| Ujongano | 1*UART0, 2*UART1,
2*GPIO, 1*Ibhetri |
2*UART0, 2*GPIO,
2*IIC, 1*Ibhetri |
2*UART0, 2*GPIO,
2*IIC, 1*Ibhetri |
| Isithethi sikaJack | EWE | EWE | EWE |
| Indawo yeKhadi le-TF | EWE | EWE | EWE |
| Indawo esebenzayo | 95.04*53.86mm(W*H) | 108*64.8mm(W*H) | 153.84*85.63mm(W*H) |
Izixhobo zoKwandiswa
Ngolwazi oluthe vetshe, nceda uskene ikhowudi ye-QR kwi URL:
https://www.elecrow.com/wiki/CrowPanel_ESP32_HMI_Wiki_Content.html
- Umzobo weSchematic
- Ikhowudi yonikezo
- ESP32 iModyuli yeenkcukacha zedatha
- Amathala eencwadi eArduino
Imiyalelo yoKhuseleko
Ukuqinisekisa ukusetyenziswa ngokukhuselekileyo kwaye uthintele ukwenzakala okanye umonakalo kuwe nakwabanye, nceda ulandele imiyalelo yokhuseleko engezantsi.
- Kuphephe ukuveza isikrini ekukhanyeni kwelanga okanye kwimithombo yokukhanya eyomeleleyo ukuthintela ukuchaphazela viewisiphumo kunye nobomi.
- Kuphephe ukucinezela okanye ukushukumisa isikrini ngamandla ngexesha lokusetyenziswa ukunqanda ukukhulula uqhagamshelo lwangaphakathi kunye namalungu.
- Ngokungasebenzi kakuhle kwesikrini, okufana nokuqhwanyaza, ukugqwetheka kombala, okanye umboniso ongacacanga,\ Yeka ukusetyenziswa kwaye ufune ukulungiswa kwengcali.
- Ngaphambi kokuba ulungise okanye utshintshe naziphi na izixhobo zesixhobo, qiniseka ukuba ucima umbane kwaye uqhawule uqhagamshelo kwisixhobo
Qhagamshelana
- Igama leNkampani: Elecrow Technology Development Co., Ltd.
- Idilesi yeNkampani: No.4832 Ba'an Avenue, kwiSithili saseBao'an, kwisiXeko saseShenzhen
- Inkampani webindawo: https://www.elecrow.com
- Ngolwazi oluthe vetshe, nceda uskene ikhowudi ye-QR kwi URL:
- https://www.elecrow.com/wiki/CrowPanel_ESP32_HMI_Wiki_Content.html
Yenziwe etshayina
Amaxwebhu / Izibonelelo
 |
I-CrowPanel ESP32 Bonisa i-LCD ye-Touch Screen iyahambelana [pdf] Incwadi yokusebenzisa ESP32-WROOM-32, ESP32-WROVER-B, ESP32-S3-WROOM-1-N4R2, ESP32-S3-WROOM-1-N4R8, ESP32 Bonisa LCD Touch Screen Iyahambelana, Bonisa LCD Touch Screen Iyahambelana, Touch Screen Iyahambelana, Screen Iyahambelana, Iyahambelana |