CrowPanel ESP32 Display LCD Touch Screen Compatible
Specifications
- Size: 2.4″, 2.8″, 3.5″, 4.3″, 5.0″, 7.0″
- Resolution: Varies by size
- Touch Type: Resistive Touch (2.4″, 2.8″, 3.5″), Capacitive Touch (4.3″, 5.0″, 7.0″)
- Main Processor: Varies by model
- Frequency: 240 MHz
- Flash: 4MB
- SRAM: 520KB – 512KB
- ROM: 448KB – 384KB
- PSRAM: 8MB, 2MB
- Display Driver: ILI9341V, ILI9488, NV3047,\ ILI6122 & ILI5960, EK9716BD3 & EK73002ACGB
- Screen Type: TFT
- Interface: Varies by size
- Speaker Jack: YES
- TF Card Slot: YES
- Active Area: Varies by size
Product Usage Instructions
1. Package Contents:
Ensure the package contains: ESP32 Display, User Manual, USB-A\ to Type-C Cable, Crowtail/Grove to 4pin DuPont Cable, Resistive Touch Pen (not included with 5-inch and 7-inch display).
2. Screen Buttons and Interfaces:
Refer to the silk screen labeled interfaces and buttons on theactual product for reference.
3. Safety Instructions:
- Avoid exposing the screen to sunlight or strong light sources.
- Avoid pressing or shaking the screen hard during use.
- If you experience screen malfunctions, seek professional\ repair.
- Turn off the power and disconnect from the device before repairing or replacing components.
Frequently Asked Questions
Q: Do all models come with a resistive touch pen?
A: No, only the models below 5 inches do not come with a resistive touch pen.
Thank you for purchasing our product. Please read this user manual carefully before use and keep it properly for future reference
Package List
The following list diagram is for reference only. Please refer to the actual product inside the package for details
Screen appearance varies by model, and diagrams are for reference only. Interfaces and buttons are silk screen labeled, use actual product as reference
ESP32 Display 2.4 Inch
ESP32 Display 2.8 Inch
ESP32 Display 3.5 Inch
ESP32 Display 4.3 Inch
ESP32 Display 5.0 Inch
ESP32 Display 7.0 Inch
Parameters
| Size | 2.4″ | 2.8″ | 3.5″ |
| Resolution | 320*240 | 320*240 | 480*320 |
| Touch Type | Resistive Touch | Resistive Touch | Resistive Touch |
| Main Processor | ESP32-WROOM-32-N4 | ESP32-WROOM-32-N4 | ESP32-WROVER-B |
|
Frequency |
240 MHz |
240 MHz |
240 MHz |
|
Flash |
4MB |
4MB |
4MB |
|
SRAM |
520KB | 520KB | 520KB |
| ROM | 448KB | 448KB | 448KB |
| PSRAM | / | / | 8MB |
| Display Driver | ILI9341V | ILI9341V | ILI9488 |
|
Screen Type |
TFT | TFT | TFT |
| Interface | 1*UART0, 1*UART1,
1*IIC, 1*GPIO, 1*Battery |
1*UART0, 1*UART1,
1*IIC, 1*GPIO, 1*Battery |
2*UART0, 1*IIC,
1*GPIO, 1*Battery |
| Speaker Jack | YES | YES | YES |
| TF Card Slot | YES | YES | YES |
| Active Area | 36.72*48.96mm(W*H) | 43.2*57.6mm(W*H) | 48.96*73.44mm(W*H) |
| Size | 4.3″ | 5.0″ | 7.0” |
| Resolution | 480*272 | 800*480 | 800*480 |
| Touch Type | Resistive Touch | Capacitive Touch | Capacitive Touch |
| Main Processor | ESP32-S3-WROOM-1- N4R2 | ESP32-S3-WROOM-1- N4R8 | ESP32-S3-WROOM-1- N4R8 |
|
Frequency |
240 MHz |
240 MHz |
240 MHz |
|
Flash |
4MB |
4MB |
4MB |
|
SRAM |
512KB | 512KB | 512KB |
| ROM | 384KB | 384KB | 384KB |
| PSRAM | 2MB | 8MB | 8MB |
| Display Driver | NV3047 | ILI6122 & ILI5960 | EK9716BD3 &
EK73002ACGB |
|
Screen Type |
TFT | TFT | TFT |
| Interface | 1*UART0, 2*UART1,
2*GPIO, 1*Battery |
2*UART0, 2*GPIO,
2*IIC, 1*Battery |
2*UART0, 2*GPIO,
2*IIC, 1*Battery |
| Speaker Jack | YES | YES | YES |
| TF Card Slot | YES | YES | YES |
| Active Area | 95.04*53.86mm(W*H) | 108*64.8mm(W*H) | 153.84*85.63mm(W*H) |
Expansion Resources
For more detailed information, please scan the QR code to the URL:
https://www.elecrow.com/wiki/CrowPanel_ESP32_HMI_Wiki_Content.html
- Schematic Diagram
- Source Code
- ESP32 Module Datasheet
- Arduino Libraries
Safety Instructions
To ensure safe use and avoid injury or property damage to yourself and others, please follow the safety instructions below.
- Avoid exposing the screen to sunlight or strong light sources to prevent affecting its viewing effect and lifespan.
- Avoid pressing or shaking the screen hard during use to prevent loosening of internal connections and components.
- For screen malfunctions, such as flickering, color distortion, or unclear display,\ stop use and seek professional repair.
- Before repairing or replacing any equipment components, make sure to turn off the power and disconnect from the device
Contact
- Company Name: Elecrow Technology Development Co., Ltd.
- Company address: No.4832 Ba’an Avenue, Bao’an District, Shenzhen City
- Company website: https://www.elecrow.com
- For more detailed information, please scan the QR code to the URL:
- https://www.elecrow.com/wiki/CrowPanel_ESP32_HMI_Wiki_Content.html
Made in China
Documents / Resources
 |
CrowPanel ESP32 Display LCD Touch Screen Compatible [pdf] User Manual ESP32-WROOM-32, ESP32-WROVER-B, ESP32-S3-WROOM-1-N4R2, ESP32-S3-WROOM-1-N4R8, ESP32 Display LCD Touch Screen Compatible, Display LCD Touch Screen Compatible, Touch Screen Compatible, Screen Compatible, Compatible |