CrowPanel ESP32 Display LCD Touch Screen e tsamaellana
Litlhaloso
- Boholo: 2.4″, 2.8″, 3.5″, 4.3″, 5.0″, 7.0″
- Qeto: E fapana ka boholo
- Mofuta oa ho ama: Resistive Touch (2.4″, 2.8″, 3.5″), Capacitive Touch (4.3″, 5.0″, 7.0″)
- Main processor: E fapana ho ea ka mohlala
- Hangata: 240 MHz
- Flash: 4MB
- SRAM: 520KB - 512KB
- ROM: 448KB - 384KB
- PSRAM: 8MB, 2MB
- Hlahisa Driver: ILI9341V, ILI9488, NV3047,\ ILI6122 & ILI5960, EK9716BD3 & EK73002ACGB
- Mofuta oa skrine: TFT
- Sehokelo: E fapana ka boholo
- Sebui Jack: EE
- Slot ea TF Card: EE
- Sebaka se sebetsang: E fapana ka boholo
Litaelo tsa Tšebeliso ea Sehlahisoa
1. Package Tse ka Hare:
Netefatsa hore sephutheloana se na le: ESP32 Display, Bukana ea Mosebelisi, USB-A\ ho ea ho Cable ea Type-C, Crowtail/Grove to 4pin DuPont Cable, Resistive Touch Pen (ha e kenyelelitsoe le 5-inch le 7-inch).
2. Likonopo tsa skrine le li-interfaces:
Sheba skrineng sa silika se ngotsoeng li-interfaces le likonopo tsa sehlahisoa sa sebele bakeng sa litšupiso.
3. Litaelo tsa Polokeho:
- Qoba ho pepesa skrine khanya ea letsatsi kapa mehloling e matla ea khanya.
- Qoba ho tobetsa kapa ho sisinya skrine ka matla nakong ea ts'ebeliso.
- Haeba u e-na le bothata ba ho sebetsa skrineng, batla setsebi\ tokiso.
- Koala motlakase 'me u hakolle sesebelisoa pele u lokisa kapa u fetola likaroloana.
Lipotso Tse Botsoang Hangata
P: Na mehlala eohle e tla le pene e thibelang ho ama?
A: Che, ke mefuta e ka tlase ho lisenthimithara tse 5 feela e sa tleng le pene ea ho ama e hanyetsang.
Re leboha ha o rekile sehlahisoa sa rona. Ka kopo bala bukana ena ea mosebelisi ka hloko pele u e sebelisa 'me u e boloke ka nepo bakeng sa tšebeliso ea nako e tlang
Lethathamo la Liphutheloana
Setšoantšo se latelang sa lethathamo ke sa litšupiso feela. Ka kopo sheba sehlahisoa sa 'nete ka har'a sephutheloana bakeng sa lintlha
Ponahalo ea skrine e fapana ho ea ka mohlala, 'me litšoantšo ke tsa litšupiso feela. Li-interface le likonopo li ngotsoe skrineng sa silika, sebelisa sehlahisoa sa 'nete e le litšupiso
ESP32 Pontšo ea 2.4 inch
ESP32 Pontšo ea 2.8 inch
ESP32 Pontšo ea 3.5 inch
ESP32 Pontšo ea 4.3 inch
ESP32 Pontšo ea 5.0 inch
ESP32 Pontšo ea 7.0 inch
Mekhahlelo
| Boholo | 2.4″ | 2.8″ | 3.5″ |
| Qeto | 320*240 | 320*240 | 480*320 |
| Mofuta oa Thepa | Resistive tšoara | Resistive tšoara | Resistive tšoara |
| Main processor | ESP32-WROOM-32-N4 | ESP32-WROOM-32-N4 | ESP32-MOHLAPI-B |
|
Khafetsa |
240 MHz |
240 MHz |
240 MHz |
|
Khanya |
4MB |
4MB |
4MB |
|
SRAM |
520 KB | 520 KB | 520 KB |
| ROM | 448 KB | 448 KB | 448 KB |
| PSRAM | / | / | 8MB |
| Hlahisa Mokhanni | ILI9341V | ILI9341V | ILI9488 |
|
Mofuta oa skrine |
TFT | TFT | TFT |
| Sehokedi | 1*UART0, 1*UART1,
1*IIC, 1*GPIO, 1*Betri |
1*UART0, 1*UART1,
1*IIC, 1*GPIO, 1*Betri |
2*UART0, 1*IIC,
1*GPIO, 1*Betri |
| Sebui Jack | EE | EE | EE |
| Slot ea TF Card | EE | EE | EE |
| Sebaka se sebetsang | 36.72*48.96mm(W*H) | 43.2*57.6mm(W*H) | 48.96*73.44mm(W*H) |
| Boholo | 4.3″ | 5.0″ | 7.0” |
| Qeto | 480*272 | 800*480 | 800*480 |
| Mofuta oa Thepa | Resistive tšoara | Capacitive Touch | Capacitive Touch |
| Main processor | ESP32-S3-WROOM-1- N4R2 | ESP32-S3-WROOM-1- N4R8 | ESP32-S3-WROOM-1- N4R8 |
|
Khafetsa |
240 MHz |
240 MHz |
240 MHz |
|
Khanya |
4MB |
4MB |
4MB |
|
SRAM |
512 KB | 512 KB | 512 KB |
| ROM | 384 KB | 384 KB | 384 KB |
| PSRAM | 2MB | 8MB | 8MB |
| Hlahisa Mokhanni | NV3047 | ILI6122 & ILI5960 | EK9716BD3 le
EK73002ACGB |
|
Mofuta oa skrine |
TFT | TFT | TFT |
| Sehokedi | 1*UART0, 2*UART1,
2*GPIO, 1*Betri |
2 * UART0, 2 * GPIO,
2*IIC, 1*Betri |
2 * UART0, 2 * GPIO,
2*IIC, 1*Betri |
| Sebui Jack | EE | EE | EE |
| Slot ea TF Card | EE | EE | EE |
| Sebaka se sebetsang | 95.04*53.86mm(W*H) | 108*64.8mm(W*H) | 153.84*85.63mm(W*H) |
Lisebelisoa tsa Katoloso
Bakeng sa tlhaiso-leseling e batsi, ka kopo hlahloba khoutu ea QR ho URL:
https://www.elecrow.com/wiki/CrowPanel_ESP32_HMI_Wiki_Content.html
- Setšoantšo sa Schematic
- Mohloli oa Khoutu
- Lethathamo la lintlha tsa ESP32
- Lilaebrari tsa Arduino
Litaelo tsa Tšireletseho
Ho netefatsa ts'ebeliso e bolokehileng le ho qoba kotsi kapa tšenyo ea thepa ho uena le ba bang, ka kopo latela litaelo tsa polokeho tse ka tlase.
- Qoba ho pepesa skrine khanya ea letsatsi kapa mehloli e matla ea khanya ho thibela ho e ama viewphello le nako ea bophelo.
- Qoba ho tobetsa kapa ho sisinya skrine ka thata nakong ea ts'ebeliso ho thibela ho lokoloha ha likhokahano le likarolo tsa kahare.
- Bakeng sa ho se sebetse hantle ha skrini, joalo ka ho panyang, ho sothofala ha mebala, kapa ponts'o e sa hlakang,\ emisa ho sebelisa 'me u batle tokiso ea litsebi.
- Pele o lokisa kapa o fetola lisebelisoa life kapa life, etsa bonnete ba hore o tima matla le ho hakolla sesebelisoa
Ikopanye
- Lebitso la Khamphani: Elecrow Technology Development Co., Ltd.
- Aterese ea Khampani: No.4832 Ba'an Avenue, Setereke sa Bao'an, Motse oa Shenzhen
- Khampani websebaka: https://www.elecrow.com
- Bakeng sa tlhaiso-leseling e batsi, ka kopo hlahloba khoutu ea QR ho URL:
- https://www.elecrow.com/wiki/CrowPanel_ESP32_HMI_Wiki_Content.html
E entsoe chaena
Litokomane / Lisebelisoa
 |
CrowPanel ESP32 Display LCD Touch Screen e tsamaellana [pdf] Bukana ea Mosebelisi ESP32-WROOM-32, ESP32-WROVER-B, ESP32-S3-WROOM-1-N4R2, ESP32-S3-WROOM-1-N4R8, ESP32 Pontšo ea LCD Touch Screen e Tsamaellana, Pontšo ea LCD e Tšebelisano e Tšoanang, Skrini e Tšoanang E lumellana, E lumellana |