I-Beijer ELECTRONICS GT-4218 Imodyuli yokuPhuma yeAnalog
Ulwazi lweMveliso
Iinkcukacha
- Umzekelo: GT-4218 Analog Output Module
- Imijelo: 8
- Imveliso: 4 - 20 mA
- Isigqibo: 12 bit
- Uhlobo lwetheminali: Ikheji Clamp
- Itheminali esuswayo: 10-point
Malunga nale Ncwadana
Le ncwadana iqulethe ulwazi malunga nesoftware kunye nezixhobo zehardware zeBeijer Electronics GT-4218 Imodyuli yokuPhuma yeAnalog. Inika iinkcukacha ezinzulu, isikhokelo sofakelo, ukuseta, kunye nokusetyenziswa kwemveliso.
Iisimboli ezisetyenziswa kule ncwadana
Olu papasho luquka isilumkiso, iSilumkiso, iNqaku kunye neempawu ezibalulekileyo apho kufanelekileyo, ukubonisa ukhuseleko, okanye ezinye iinkcukacha ezibalulekileyo. Iisimboli ezihambelanayo kufuneka zitolikwe ngolu hlobo lulandelayo:
ISILUMKISO
I-ayikhoni yeSilumkiso ibonisa imeko enokuba nobungozi enokuthi, ukuba ayiphetshwa, ingabangela ukufa okanye ukwenzakala okumandundu, kunye nomonakalo omkhulu kwimveliso.
ISILUMKO
I-Caution icon ibonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, ingabangela ukwenzakala okuncinci okanye okuphakathi, kunye nomonakalo ophakathi kwimveliso.
PHAWULA
I-ayikhoni yeNqaku ilumkisa umfundi ngeenyaniso ezifanelekileyo kunye neemeko.
KUBALULEKILEYO
I-ayikhoni ebalulekileyo igxininisa ulwazi olubalulekileyo.
Ukhuseleko
- Ngaphambi kokusebenzisa le mveliso, nceda ufunde le ncwadana kunye nezinye iincwadana ezifanelekileyo ngononophelo. Nika ingqalelo epheleleyo kwimiyalelo yokhuseleko!
- Akukho siganeko siya kuba noxanduva lwe-Beijer Electronics okanye uxanduva lomonakalo obangelwa kukusetyenziswa kwale mveliso.
- Imifanekiso, umzampiiles kunye nemizobo kule ncwadana zibandakanyiwe ngeenjongo zokubonisa. Ngenxa yezinto ezininzi eziguquguqukayo kunye neemfuno ezinxulumene naluphi na ufakelo oluthile, iBeijer Electronics ayinakuthatha uxanduva okanye uxanduva lokusetyenziswa ngokwenyani ngokusekelwe kwi-ex.amples kunye nemizobo.
Izatifikethi zeMveliso
Imveliso ineziqinisekiso zemveliso ezilandelayo.
Iimfuno ngokubanzi zoKhuseleko
ISILUMKISO
- Musa ukudibanisa iimveliso kunye neengcingo ngamandla aqhagamshelwe kwinkqubo. Ukwenza njalo kubangela "i-arc flash", enokubangela iziganeko ezinobungozi ezingalindelekanga (ukutsha, umlilo, izinto ezibhabhayo, uxinzelelo lokuqhuma, ukuqhuma kwesandi, ukushisa).
- Sukuchukumisa iibhloko zeterminal okanye iimodyuli ze-IO xa inkqubo isebenza. Ukwenza oko kunokubangela ukothuka kombane, isekethe emfutshane okanye ukungasebenzi kakuhle kwesixhobo.
- Ungaze uvumele izinto zentsimbi zangaphandle zichukumise imveliso xa inkqubo isebenza. Ukwenza oko kunokubangela ukothuka kombane, isekethe emfutshane okanye ukungasebenzi kakuhle kwesixhobo.
- Musa ukubeka imveliso kufuphi nezinto ezinokutsha. Ukwenjenjalo kunokubangela umlilo.
- Wonke umsebenzi wocingo kufuneka wenziwe yinjineli yombane.
- Xa uphethe iimodyuli, qinisekisa ukuba bonke abantu, indawo yokusebenza kunye nokupakishwa zisekelwe kakuhle. Gwema ukubamba amacandelo okuqhuba, iimodyuli ziqulethe izinto ze-elektroniki ezinokutshatyalaliswa ngokukhutshwa kwe-electrostatic.
ISILUMKO
- Ungaze usebenzise imveliso kwindawo ezinobushushu obungaphezulu kwe 60℃. Kuphephe ukubeka imveliso kwilanga elithe ngqo.
- Ungaze usebenzise imveliso kwindawo enokufuma okungaphezulu kwe-90%.
- Ngalo lonke ixesha sebenzisa imveliso kwindawo enongcoliseko degree 1 okanye 2.
- Sebenzisa iintambo eziqhelekileyo zocingo.
Malunga neNkqubo ye-G-series
Inkqubo iphelileview
- Imodyuli yeAptha yeNethiwekhi -Imodyuli ye-adapter yenethiwekhi yenza ikhonkco phakathi kwebhasi yentsimi kunye nezixhobo zentsimi kunye neemodyuli zokwandisa. Uxhulumaniso kwiinkqubo ezahlukeneyo zebhasi yebhasi inokusekwa nganye kwimodyuli ye-adapter yenethiwekhi ehambelanayo, umzekelo, i-MODUS TCP, i-Ethernet IP, i-EtherCAT, i-PROFINET, i-CC-Link IE Field, i-PROFIBUS, i-CANopen, i-DeviceNet, i-CC-Link, i-MODUS / i-Serial njl.
- Ukwandiswa kweModyuli - Iindidi zeemodyuli zokwandiswa: I-IO yeDijithali, i-Analog IO, kunye neemodyuli eziKhethekileyo.
- Ukuthumela imiyalezo -Isistim isebenzisa iindidi ezimbini zemiyalezo: Inkonzo yokuthumela imiyalezo kunye ne-IO yemiyalezo.
Inkqubo ye-IO yeMaphu yedatha
Imodyuli yokwandisa ineentlobo ezintathu zedatha: idatha ye-IO, ipharamitha yoqwalaselo, kunye nerejista yememori. Utshintshiselwano lwedatha phakathi kwe-adapter yenethiwekhi kunye neemodyuli zokwandisa zenziwe nge-IO inkqubo yedatha yomfanekiso ngeprotocol yangaphakathi.
- Ukuhamba kwedatha phakathi kwe-adapter yenethiwekhi (i-63 slots) kunye neemodyuli zokwandisa
- Igalelo kunye nemveliso yedatha yomfanekiso ixhomekeke kwindawo yokubeka kunye nohlobo lwedatha ye-slot yokwandisa. Ukucwangciswa igalelo kunye nemveliso data umfanekiso wenkqubo isekelwe kwindawo slot ukwandiswa. Ubalo lwala malungiselelo lubandakanyiwe kwiincwadana ze-adaptha yenethiwekhi kunye neemodyuli ze-IO ezicwangcisiweyo.
- Idatha yeparameter esebenzayo ixhomekeke kwiimodyuli ezisetyenziswayo. UmzekeloampLe, iimodyuli ze-analog zinezicwangciso ze-0-20 mA okanye 4-20 mA, kwaye iimodyuli zobushushu zineseto ezifana ne-PT100, PT200, kunye ne-PT500. Uxwebhu lwemodyuli nganye lubonelela ngenkcazo yedatha yeparameter.
Iinkcukacha
Iinkcukacha zokusingqongileyo
| Ubushushu bokusebenza | -20°C – 60°C |
| Ubushushu be-UL | -20°C – 60°C |
| Ubushushu bokugcina | -40°C – 85°C |
| Ubuntu bezizalwane | I-5% -90% ayivali |
| Ukunyuka | DIN kaloliwe |
| Ukothuka ukusebenza | IEC 60068-2-27 (15G) |
| Ukuxhathisa ukungcangcazela | IEC 60068-2-6 (4 g) |
| Ukukhutshwa kwamashishini | I-EN 61000-6-4: 2019 |
| Ukungakhuseleki kwamashishini | I-EN 61000-6-2: 2019 |
| Indawo yokufakela | Ithe nkqo kwaye ithe tye |
| Izatifikethi zemveliso | CE, FCC, UL, cUL |
Iinkcukacha ngokuBanzi
| Ukutshatyalaliswa kwamandla | Max. 30 mA @ 5 VDC |
| Ukubekwa wedwa | I/O ukuya kwingqiqo: Ifotocoupler yodwa
Amandla ommandla: Ukungakhethi |
| UL amandla entsimi | Ukubonelela ngevoltage: 24 VDC igama, iklasi 2 |
| Amandla entsimi | Ukubonelela ngevoltage: 24 VDC nominal Voltage uluhlu: 18 - 30 VDC
Ukutshatyalaliswa kwamandla: 130 mA @ 24 VDC |
| Iintambo | I/O intambo enkulu. 2.0 mm2 (AWG 14) |
| Torque | 0.8 Nm (7Ib-in) |
| Ubunzima | 58 g |
| Ubungakanani bemodyuli | 12 mm x 99 mm x 70 mm |
Imilinganiselo
Imilinganiselo yeemodyuli (mm)
IiNgcaciso zeZiphumo
| Imveliso kwimodyuli nganye | Iitshaneli ezi-8 ziphelile, zingahlukaniswanga phakathi kwetshaneli |
| Iimpawu (icala lengqiqo) | 8 imo yemveliso eluhlaza |
| Isisombululo kwiindidi | amasuntswana ali-12: 3.91 uA/bit |
| Uluhlu lwemveliso | 4 - 20 mA |
| Ifomathi yedatha | I-16 bits integer (2′ ukuncoma) |
| Impazamo yemodyuli | ±0.1 % isikali esipheleleyo @ 25 ℃
±0.3 % isikali esipheleleyo @ -40 °C, 60 ℃ |
| Ukumelana nomthwalo | Max. 250 Ω |
| Uxilongo | Ukucinywa kombane: Ukuqhwanyaza kwe-LED
Amandla ommandla avuliwe: Imveliso ye-LED ivuliwe |
| Ixesha loguqulo | 0.2 ms / onke amajelo |
| Ulungelelwaniso | Ayifuneki |
| Uhlobo oluqhelekileyo | 2 eqhelekileyo, amandla entsimi 0 V ixhaphakile (AGND) |
Umzobo wocingo
| Inombolo yePin. | Inkcazo yomqondiso |
| 0 | Ijelo lemveliso ye-analog 0 |
| 1 | Ijelo lemveliso ye-analog 1 |
| 2 | Ijelo lemveliso ye-analog 2 |
| 3 | Ijelo lemveliso ye-analog 3 |
| 4 | Ijelo lemveliso ye-analog 4 |
| 5 | Ijelo lemveliso ye-analog 5 |
| 6 | Ijelo lemveliso ye-analog 6 |
| 7 | Ijelo lemveliso ye-analog 7 |
| 8 | Ijelo lemveliso eqhelekileyo (AGND) |
| 9 | Ijelo lemveliso eqhelekileyo (AGND) |
Isalathisi se-LED
| Inombolo ye-LED. | Umsebenzi we-LED / inkcazo | Umbala we-LED |
| 0 | I-OUTPUT itshaneli 0 | Luhlaza |
| 1 | I-OUTPUT itshaneli 1 | Luhlaza |
| 2 | I-OUTPUT itshaneli 2 | Luhlaza |
| 3 | I-OUTPUT itshaneli 3 | Luhlaza |
| 4 | I-OUTPUT itshaneli 4 | Luhlaza |
| 5 | I-OUTPUT itshaneli 5 | Luhlaza |
| 6 | I-OUTPUT itshaneli 6 | Luhlaza |
| 7 | I-OUTPUT itshaneli 7 | Luhlaza |
Ubume beSitishi se-LED
| Ubume | I-LED | Isalathiso |
| Ukusebenza okuqhelekileyo | Luhlaza | Ukusebenza okuqhelekileyo |
| Impazamo yamandla ommandla | Onke amajelo aphinda aluhlaza kwaye acime | Amandla ommandla akadityaniswanga |
Ixabiso leDatha / langoku
Uluhlu lwangoku: 4 - 20 mA
| Okwangoku | 4.0 mA | 8.0 mA | 12.0 mA | 20.0 mA |
| Idatha(Hex) | H0000 | H0400 | H0800 | H0FFF |
Imephu yeDatha kwiTheyibhile yoMfanekiso
Imveliso yexabiso lomfanekiso
| Hayi kancinci. | Incinci 7 | Incinci 6 | Incinci 5 | Incinci 4 | Incinci 3 | Incinci 2 | Incinci 1 | Incinci 0 |
| Byte 0 | Imveliso ye-analog Ch 0 ngebhayithi ephantsi | |||||||
| Byte 1 | Imveliso ye-analog Ch 0 ngebhayithi ephezulu | |||||||
| Byte 2 | Imveliso ye-analog Ch 1 ngebhayithi ephantsi | |||||||
| Byte 3 | Imveliso ye-analog Ch 1 ngebhayithi ephezulu | |||||||
| Byte 4 | Imveliso ye-analog Ch 2 ngebhayithi ephantsi | |||||||
| Byte 5 | Imveliso ye-analog Ch 2 ngebhayithi ephezulu | |||||||
| Byte 6 | Imveliso ye-analog Ch 3 ngebhayithi ephantsi | |||||||
| Byte 7 | Imveliso ye-analog Ch 3 ngebhayithi ephezulu | |||||||
| Byte 8 | Imveliso ye-analog Ch 4 ngebhayithi ephantsi | |||||||
| Byte 9 | Imveliso ye-analog Ch 4 ngebhayithi ephezulu | |||||||
| Byte 10 | Imveliso ye-analog Ch 5 ngebhayithi ephantsi | |||||||
| Byte 11 | Imveliso ye-analog Ch 5 ngebhayithi ephezulu | |||||||
| Byte 12 | Imveliso ye-analog Ch 6 ngebhayithi ephantsi | |||||||
| Byte 13 | Imveliso ye-analog Ch 6 ngebhayithi ephezulu | |||||||
| Byte 14 | Imveliso ye-analog Ch 7 ngebhayithi ephantsi | |||||||
| Byte 15 | Imveliso ye-analog Ch 7 ngebhayithi ephezulu | |||||||
Idatha yemodyuli yemveliso - 16 byte data output
| Imveliso ye-analog Ch 0 |
| Imveliso ye-analog Ch 1 |
| Imveliso ye-analog Ch 2 |
| Imveliso ye-analog Ch 3 |
| Imveliso ye-analog Ch 4 |
| Imveliso ye-analog Ch 5 |
| Imveliso ye-analog Ch 6 |
| Imveliso ye-analog Ch 7 |
Idatha yeParameter
Ubude beparameter esebenzayo: 4 bytes
| Kancinci Hayi. | Incinci 7 | Incinci 6 | Incinci 5 | Incinci 4 | Incinci 3 | Incinci 2 | Incinci 1 | Incinci 0 |
| Byte 0 | Isenzo esinempazamo kwitshaneli yesi-3 | Isenzo esinempazamo kwitshaneli yesi-2 | Isenzo esinempazamo kwitshaneli yesi-1 | Isenzo esinempazamo kwitshaneli yesi-0 | ||||
| 00: Ixabiso lempazamo / 01: Bamba imeko yokugqibela / 10: Umda ophantsi / 11: Umda ophezulu | ||||||||
| Byte 1 | Isenzo esinempazamo kwitshaneli yesi-7 | Isenzo esinempazamo kwitshaneli yesi-6 | Isenzo esinempazamo kwitshaneli yesi-5 | Isenzo esinempazamo kwitshaneli yesi-4 | ||||
| 00: Ixabiso lempazamo / 01: Bamba imeko yokugqibela / 10: Umda ophantsi / 11: Umda ophezulu | ||||||||
| Byte 2 | Ixabiso lempazamo liphantsi | |||||||
| Byte 3 | Ayisetyenziswanga | Ixabiso le-byte ephezulu | ||||||
Ukuseta i-Hardware
ISILUMKO
- Soloko ufunda esi sahluko phambi kokufaka imodyuli!
- Umphezulu oshushu! Umphezulu wendlu unokuba shushu ngexesha lokusebenza. Ukuba ifowuni isetyenziswa kumaqondo obushushu aphezulu akwi-ambient, soloko uvumele ifowuni ukuba iphole phambi kokuba uyibambe.
- Ukusebenza kwizixhobo ezinamandla kunokonakalisa izixhobo! Soloko ucima unikezelo lombane phambi kokuba usebenze kwisixhobo.
Iimfuno zesithuba
Imizobo elandelayo ibonisa iimfuno zendawo xa ufaka iimodyuli ze-G-series. Isithuba sidala isithuba sokungena komoya, kwaye sithintela uphazamiseko olwenziwa ngumbane wombane ekubeni luphembelele umsebenzi. Indawo yokuhlohla ilungile ithe nkqo kwaye ithe tye. Imizobo iyimifanekiso kwaye isenokungalingani.
ISILUMKO
UKUNGANI ukulandela iimfuno zendawo kunokubangela ukonakalisa imveliso.
Nyuka iModyuli ukuya kwi-DIN kaloliwe
Izahluko ezilandelayo zichaza indlela yokunyuswa kwemodyuli kwisiporo seDIN.
ISILUMKO
Imodyuli kufuneka ilungiswe kwi-DIN kaloliwe kunye nezixhobo zokutshixa.
Nyuka i-GL-9XXX okanye i-GT-XXXX Imodyuli
Le miyalelo ilandelayo iyasebenza kwezi ntlobo zemodyuli:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Iimodyuli ze-GN-9XXX zineentsimbi zokutshixa ezintathu, enye isezantsi kwaye ezimbini ecaleni. Ngemiyalelo yokunyuswa, jonga kwiModyuli ye-Mount GN-9XXX.
Nyuka kwi-DIN kaloliwe 
Ukwehla kwi-DIN kaloliwe
Nyuka i-GN-9XXX Imodyuli
Ukunyuka okanye ukuhlisa iadaptha yenethiwekhi okanye imodyuli yeIO ecwangcisekileyo enegama lemveliso GN-9XXX, ye ex.ample GN-9251 okanye GN-9371, bona le miyalelo ilandelayo: 
Nyuka kwi-DIN kaloliwe 
Ukwehla kwi-DIN kaloliwe
Nqaba iBhlokhi yeSitena esiSukayo
Ukunyuka okanye ukuhlisa ibhloko yeterminal esusekayo (RTB), bona le miyalelo ingezantsi.
Nyusa ibhloko yetheminali esusekayo 
Yehlisa ibhloko yeterminal esusekayo
Qhagamshela iiCables kwiBhloko yeSitena esiSukayo
Ukuqhagamshela/ukukhupha iintambo ukuya/ukusuka kwibhloko yetheminali esusekayo (RTB), bona le miyalelo ingezantsi.
ISILUMKISO
Soloko usebenzisa umthamo wonikezelo olucetyiswayotage kunye nobuninzi bokuthintela umonakalo kwisixhobo kunye nokuqinisekisa ukusebenza kakuhle.
Intambo yokudibanisa 
Nqamula intambo
Amandla oMmandla kunye nezikhonkwane zeDatha
Unxibelelwano phakathi kwe-adapter yenethiwekhi ye-G-series kunye nemodyuli yokwandisa, kunye nenkqubo / ukunikezelwa kwamandla entsimi yeemodyuli zebhasi zenziwa ngebhasi yangaphakathi. Iqulethwe ngamaPini aMandla oMmandla we-2 kunye neePini zeDatha ezi-6.
ISILUMKISO
Sukuchukumisa idatha kunye nezikhonkwane zamandla endle! Ukuchukumisa kunokubangela ukungcoliswa kunye nomonakalo yingxolo ye-ESD.
| Inombolo yePin. | Igama | Inkcazo |
| P1 | Inkqubo yeVCC | Unikezelo lwenkqubo voltage (5 VDC) |
| P2 | Inkqubo ye-GND | Umhlaba wenkqubo |
| P3 | Isiphumo sophawu | Umqondiso wemveliso yemodyuli yeprosesa |
| P4 | Iziphumo zothotho | Ugqithiso lwemveliso yemodyuli yeprosesa |
| P5 | Igalelo lothotho | Umamkeli wegalelo lemodyuli yomqhubekekisi |
| P6 | Igciniwe | Igcinelwe uphawu lokugqitha |
| P7 | Ummandla we-GND | Umhlaba wentsimi |
| P8 | Indawo yeVCC | Unikezelo lommandla voltage (24 VDC) |
FAQ
- Q: Ndingenza ntoni xa ndidibana nempazamo ngeempawu zemveliso?
- A: Jonga ukudityaniswa kweengcingo, uqinisekise ulungelelwaniso olululo, kwaye ubhekisele kwincwadana yomsebenzisi ngamanyathelo okusombulula ingxaki.
- Q: Ndingayisebenzisa le modyuli kwindawo engaphandle?
- A: Imodyuli ye-GT-4218 ye-Analog Output idibana neenkcukacha zokusingqongileyo kusetyenziso oluthile lwangaphandle, jonga kwincwadana ngeenkcukacha.
Amaxwebhu / Izibonelelo
 |
I-Beijer ELECTRONICS GT-4218 Imodyuli yokuPhuma yeAnalog [pdf] Incwadi yokusebenzisa Imodyuli ye-GT-4218 ye-Analog Output, GT-4218, imodyuli ye-Analog Output, iModyuli yokuPhuma, iModyuli |
