Beijer ELECTRONICS GT-4218 Analog Output Module
Fa'amatalaga o oloa
Fa'amatalaga
- Fa'ata'ita'iga: GT-4218 Analog Output Module
- Auala: 8
- Fuafuaga: 4 – 20 mA
- I'uga: 12 bit
- Ituaiga Terminal: Fale Clamp
- Fa'ato'a Aveesea: 10-point
E uiga i Lenei Tusi Taiala
O lenei tusi lesona o loʻo i ai faʻamatalaga e uiga i mea faʻapipiʻi ma meafaigaluega o le Beijer Electronics GT-4218 Analog Output Module. E tuʻuina atu faʻamatalaga loloto, taʻiala ile faʻapipiʻiina, seti, ma le faʻaogaina o le oloa.
Fa'ailoga o lo'o Fa'aaogaina i Lenei Tusi Lesona
O lenei lomiga e aofia ai le Lapata'iga, Lapata'iga, Fa'amatalaga ma Fa'ailoga Taua pe a talafeagai ai, e fa'asino atu ai le saogalemu, po'o isi fa'amatalaga taua. O fa'ailoga tutusa e tatau ona fa'amatalaina fa'apea:
LAPATAIGA
O le ata o le Lapataiga o loʻo faʻaalia ai se tulaga e ono lamatia ai, afai e le aloese, e ono iʻu ai i le oti poʻo se manuʻa tuga, ma faʻaleagaina tele le oloa.
FAATUATUA
O le ata o le Lapata'iga e fa'ailoa mai ai se tulaga mata'utia, pe a le 'alofia, e ono i'u ai i manu'a la'ititi pe feololo, ma fa'aleagaina ai le oloa.
FAAMANATU
O le fa'ailoga Fa'amatalaga e fa'ailoa ai le tagata faitau i mea moni ma tulaga talafeagai.
TAUA
O le fa'ailoga Taua e fa'ailoa ai fa'amatalaga taua.
Saogalemu
- A'o le'i fa'aogaina lenei oloa, faamolemole faitau ma le faaeteete lenei tusi lesona ma isi tusi lesona talafeagai. Faʻalogo atoatoa i faʻatonuga saogalemu!
- E leai se mea e tupu ai le Beijer Electronics e nafa pe noatia mo mea leaga e mafua mai i le faʻaaogaina o lenei oloa.
- O ata, exampO tusi ma ata i lenei tusi lesona o loʻo aofia ai mo faʻamoemoega faʻataʻitaʻiga. Ona o le tele o fesuiaiga ma manaʻoga e fesoʻotaʻi ma soʻo se faʻapipiʻi faʻapitoa, e le mafai e le Beijer Electronics ona ave le matafaioi poʻo le noataga mo le faʻaaogaina moni e faʻavae i luga o le ex.amples ma ata.
Fa'ailoga o oloa
O le oloa o lo'o i ai tusipasi oloa nei.
Lautele Manaomia Manaomia
LAPATAIGA
- Aua le faʻapipiʻiina oloa ma uaea faʻatasi ma le mana e fesoʻotaʻi ma le masini. O le faia o lea mea e mafua ai se "arc flash", lea e mafai ona tupu ai ni mea mataʻutia e leʻi mafaufauina (mu, afi, mea lele, mamafa o le pa, leo, vevela).
- Aua le pa'i i poloka fa'amau po'o fa'aoga IO pe a fa'agasolo le faiga. O le faia o lea mea e ono te'i ai le eletise, ta'avale pu'upu'u po'o le fa'aletonu ole masini.
- Aua ne'i fa'atagaina meafaitino mai fafo e pa'i i le oloa pe a fa'agasolo le faiga. O le faia o lea mea e ono te'i ai le eletise, ta'avale pu'upu'u po'o le fa'aletonu ole masini.
- Aua le tu'u le oloa i tafatafa o mea e mu. O le faia faapea e ono tupu ai se afi.
- O galuega uma uaea e tatau ona faia e se inisinia eletise.
- Pe a taulimaina modules, ia mautinoa o tagata uma, fale faigaluega ma le faʻapipiʻiina o loʻo lelei le eleele. Aloese mai le pa'i atu i vaega fa'atonu, o lo'o iai vaega fa'aeletoroni e mafai ona fa'aumatia e ala i le fa'aleaogaina o le eletise.
FAATUATUA
- Aua ne'i fa'aogaina le oloa ile si'osi'omaga e sili atu ile 60 ℃ le vevela. Aloese mai le tu'u sa'o o le la.
- Aua ne'i fa'aogaina le oloa ile si'osi'omaga e sili atu ile 90% ole susū.
- Fa'aaoga i taimi uma le oloa i totonu o si'osi'omaga o lo'o iai le fa'aleagaina o le tikeri 1 po'o le 2.
- Fa'aoga uaea masani mo uaea.
E uiga i le G-series System
Ua uma le faigaview
- Feso'otaiga Feso'ota'iga Module - O le fesoʻotaʻiga fesoʻotaʻiga module e fausia ai le fesoʻotaʻiga i le va o le pasi fanua ma masini fanua faʻatasi ai ma le faʻalauteleina modules. O le feso'ota'iga i faiga fa'apasi eseese e mafai ona fa'atūina e ta'iala ta'itasi feso'ota'iga feso'otaiga, fa'ata'ita'iga, mo MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Fa'alautele Module - Ituaiga module faʻalautele: Digital IO, Analog IO, ma faʻapitoa faʻapitoa.
- Feau - E lua ituaiga o feʻau e faʻaaogaina e le faiga: Feʻau tautua ma feʻau IO.
IO Fa'asologa o Fa'amaumauga Fa'afanua
E tolu ituaiga o fa'amaumauga o le fa'alauteleina o fa'amaumauga: fa'amaumauga IO, fa'asologa fa'atulagaina, ma le resitala manatua. O le fesuiaiga o faʻamatalaga i le va o le fesoʻotaʻiga fesoʻotaʻiga ma le faʻalauteleina modules e faia e ala ile IO faʻasologa o ata faʻamatalaga e ala ile protocol i totonu.
- Fa'asolo fa'amatalaga i le va o feso'ota'iga feso'ota'iga (63 avanoa) ma fa'aopoopoga fa'aopoopo
- O faʻamatalaga faʻamatalaga faʻapipiʻi ma faʻamatalaga e faʻalagolago i le tulaga o le slot ma le ituaiga faʻamatalaga o le faʻalauteleina o le slot. O le fa'atonuina o fa'amatalaga ata fa'aulu ma fa'aulufalega fa'atatau i le tulaga fa'alautele avanoa. O fa'atusatusaga mo lenei fa'atulagaga o lo'o aofia i totonu o tusi lesona mo feso'ota'iga feso'ota'iga ma polokalame IO e mafai ona fa'apolokalameina.
- Fa'amaumauga fa'amaufa'ailoga aoga e fa'alagolago i modules o lo'o fa'aogaina. Mo example, modules analog ei ai tulaga o le 0-20 mA po o le 4-20 mA, ma modules vevela ei ai tulaga e pei o PT100, PT200, ma PT500. O faʻamaumauga mo module taʻitasi e tuʻuina atu ai se faʻamatalaga o faʻamaumauga faʻamau.
Fa'amatalaga
Fa'amatalaga Si'osi'omaga
| O le vevela o galuega | -20°C – 60°C |
| UL vevela | -20°C – 60°C |
| Teuga vevela | -40°C – 85°C |
| Susū fa'atusa | 5% - 90% lē faʻapipiʻiina |
| Fa'amauina | DIN nofoaafi |
| Faiga fa'ate'ia | IEC 60068-2-27 (15G) |
| Tete'e tetete | IEC 60068-2-6 (4 g) |
| Alamanuia fa'aoso | EN 61000-6-4: 2019 |
| Puipuiga fa'apisinisi | EN 61000-6-2: 2019 |
| Tulaga fa'apipi'i | Tusa'o ma faalava |
| Fa'ailoga oloa | CE, FCC, UL, cUL |
Fa'amatalaga Lautele
| Malosi'i atu | Max. 30 mA @ 5 VDC |
| Tu'ufua | I/O i le fa'aa'oa'oga: Fa'ato'a fa'atasi
Malosiaga fanua: Le fa'aesea |
| Malosiaga fanua UL | Sapalai voltagu: 24 VDC numera, vasega 2 |
| Malosiaga fanua | Sapalai voltage: 24 VDC nominal Voltage va'aiga: 18 – 30 VDC
Malosi fa'amama: 130 mA @ 24 VDC |
| Uaea | I/O uaea maualuga. 2.0 mm2 (AWG 14) |
| Torque | 0.8 Nm (7Ib-in) |
| mamafa | 58 g |
| Tele module | 12 mm x 99 mm x 70 mm |
Fua
Fua fa'atatau (mm)
Fa'amatalaga Fa'amatalaga
| Tuuina atu i le module | 8 alavai e tasi fa'ai'u, e le fa'aesea i le va |
| Fa'ailoga (itu fa'atatau) | 8 tulaga lanu meamata |
| I'uga i laina | 12 bits: 3.91 uA/bit |
| Faʻasologa o galuega | 4 – 20 mA |
| Fa'asologa o fa'amaumauga | 16 bits integer (2′ fa'afetai) |
| Fa'atonu sese | ±0.1% fua atoa @ 25 ℃
±0.3 % fua atoa @ -40 °C, 60 ℃ |
| Tete'e uta | Max. 250 Ω |
| Su'esu'ega | Pepe le malosi o le fanua: Emo moli
Malosi o le fanua: Fa'aalia le LED |
| Taimi o le liuaina | 0.2 ms / auala uma |
| Fa'avasegaina | E le mana'omia |
| Ituaiga masani | 2 masani, malosi fanua 0 V e masani (AGND) |
Ata uaea
| Pin nu. | Fa'amatalaga fa'ailoga |
| 0 | Alavai fa'atusa fa'atusa 0 |
| 1 | Alavai fa'atusa fa'atusa 1 |
| 2 | Alavai fa'atusa fa'atusa 2 |
| 3 | Alavai fa'atusa fa'atusa 3 |
| 4 | Alavai fa'atusa fa'atusa 4 |
| 5 | Alavai fa'atusa fa'atusa 5 |
| 6 | Alavai fa'atusa fa'atusa 6 |
| 7 | Alavai fa'atusa fa'atusa 7 |
| 8 | Auala fa'aaogā masani (AGND) |
| 9 | Auala fa'aaogā masani (AGND) |
Fa'ailoga LED
| LED Nu. | LED galuega / faʻamatalaga | Lanu LED |
| 0 | Auala OUTPUT 0 | Lanu meamata |
| 1 | Auala OUTPUT 1 | Lanu meamata |
| 2 | Auala OUTPUT 2 | Lanu meamata |
| 3 | Auala OUTPUT 3 | Lanu meamata |
| 4 | Auala OUTPUT 4 | Lanu meamata |
| 5 | Auala OUTPUT 5 | Lanu meamata |
| 6 | Auala OUTPUT 6 | Lanu meamata |
| 7 | Auala OUTPUT 7 | Lanu meamata |
Tulaga Alavai LED
| Tulaga | LED | Fa'ailoga |
| Fa'agaioiga masani | Lanu meamata | Fa'agaioiga masani |
| Fa'aletonu le malosi ole fanua | O ala uma e toe fai lanu meamata ma tape | E le'o feso'ota'i le malosi o le fanua |
Fa'amatalaga Taua / Taimi nei
Ole taimi nei: 4 - 20 mA
| I le taimi nei | 4.0 mA | 8.0 mA | 12.0 mA | 20.0 mA |
| Fa'amatalaga(Hex) | H0000 | H0400 | H0800 | H0FFF |
Fa'afanua Fa'amaumauga Mai le Laulau Ata
Fa'atauga ata
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | Fa'atusa fa'atusa Ch 0 paita maualalo | |||||||
| Byte 1 | Fa'atusa fa'atusa Ch 0 paita maualuga | |||||||
| Byte 2 | Fa'atusa fa'atusa Ch 1 paita maualalo | |||||||
| Byte 3 | Fa'atusa fa'atusa Ch 1 paita maualuga | |||||||
| Byte 4 | Fa'atusa fa'atusa Ch 2 paita maualalo | |||||||
| Byte 5 | Fa'atusa fa'atusa Ch 2 paita maualuga | |||||||
| Byte 6 | Fa'atusa fa'atusa Ch 3 paita maualalo | |||||||
| Byte 7 | Fa'atusa fa'atusa Ch 3 paita maualuga | |||||||
| Byte 8 | Fa'atusa fa'atusa Ch 4 paita maualalo | |||||||
| Byte 9 | Fa'atusa fa'atusa Ch 4 paita maualuga | |||||||
| Byte 10 | Fa'atusa fa'atusa Ch 5 paita maualalo | |||||||
| Byte 11 | Fa'atusa fa'atusa Ch 5 paita maualuga | |||||||
| Byte 12 | Fa'atusa fa'atusa Ch 6 paita maualalo | |||||||
| Byte 13 | Fa'atusa fa'atusa Ch 6 paita maualuga | |||||||
| Byte 14 | Fa'atusa fa'atusa Ch 7 paita maualalo | |||||||
| Byte 15 | Fa'atusa fa'atusa Ch 7 paita maualuga | |||||||
Faʻamatalaga faʻamatalaga faʻapipiʻi - 16 byte faʻamatalaga faʻamatalaga
| Tala fa'atusa Ch 0 |
| Tala fa'atusa Ch 1 |
| Tala fa'atusa Ch 2 |
| Tala fa'atusa Ch 3 |
| Tala fa'atusa Ch 4 |
| Tala fa'atusa Ch 5 |
| Tala fa'atusa Ch 6 |
| Tala fa'atusa Ch 7 |
Fa'amatalaga Parameter
Umi ta'otoga aoga: 4 paita
| Bit leai. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | Fa'aletonu mo le alalaupapa 3 | Fa'aletonu mo le alalaupapa 2 | Fa'aletonu mo le alalaupapa 1 | Fa'aletonu mo le alalaupapa 0 | ||||
| 00: Fa'aletonu le tau / 01: Taofi le tulaga mulimuli / 10: Fa'atapula'a maualalo / 11: Tapula'a maualuga | ||||||||
| Byte 1 | Fa'aletonu mo le alalaupapa 7 | Fa'aletonu mo le alalaupapa 6 | Fa'aletonu mo le alalaupapa 5 | Fa'aletonu mo le alalaupapa 4 | ||||
| 00: Fa'aletonu le tau / 01: Taofi le tulaga mulimuli / 10: Fa'atapula'a maualalo / 11: Tapula'a maualuga | ||||||||
| Byte 2 | Fa'aletonu le tau maualalo paita | |||||||
| Byte 3 | Le fa'aaogaina | Fa'aletonu le tau maualuga byte | ||||||
Seti Meafaigaluega
FAATUATUA
- Faitau i taimi uma lenei mataupu aʻo leʻi faʻapipiʻi le module!
- vevela luga! E mafai ona vevela le pito i luga ole fale ile taimi ole gaioiga. Afai e fa'aoga le masini i le maualuga o le vevela, tu'u pea le masini e mālūlū a'o le'i tago i ai.
- O le galue i masini fa'amalosi e mafai ona fa'aleagaina ai masini! Tape i taimi uma le paoa a'o le'i galue i le masini.
Avanoa Manaomia
O ata nei o lo'o fa'aalia ai avanoa avanoa pe a fa'apipi'i le G-series modules. O le avanoa e maua ai le avanoa mo le fa'avevelaina, ma taofia ai le fa'alavelave fa'aeletise fa'amalosi mai le a'afiaina o le ta'aloga. Tulaga fa'apipi'i e aoga i luga ma fa'alava. O ata e fa'ata'ita'i ma e ono le fa'atatau.
FAATUATUA
LE le mulimulitaia o avanoa e mana'omia e ono i'u ai i le fa'aleagaina o le oloa.
Mauga Module i le DIN Rail
O mataupu o loʻo mulimuli mai o loʻo faʻamatalaina pe faʻafefea ona faʻapipiʻi le module i le DIN rail.
FAATUATUA
O le module e tatau ona faʻapipiʻi i le DIN rail faʻatasi ai ma le loka loka.
Mauga GL-9XXX poʻo GT-XXXX Module
O fa'atonuga nei e fa'atatau i nei ituaiga module:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
GN-9XXX modules e tolu loka loka, tasi i le pito i lalo ma le lua i le itu. Mo faʻatonuga faʻapipiʻi, vaʻai ile Mount GN-9XXX Module.
Faʻamau i le nofoaafi DIN 
Alu ese mai le nofoaafi DIN
Mauga GN-9XXX Module
E fa'apipi'i pe fa'ae'e se feso'ota'iga feso'ota'iga po'o le module IO e mafai ona fa'apolokalameina ma le igoa oloa GN-9XXX, mo leample GN-9251 poʻo le GN-9371, vaʻai i faʻatonuga nei: 
Faʻamau i le nofoaafi DIN 
Alu ese mai le nofoaafi DIN
Mauga Aveese Aveese Poloka Terminal
Ina ia fa'apipi'i pe fa'ae'e se poloka fa'amau e mafai ona aveese (RTB), va'ai fa'atonuga o lo'o i lalo.
Fa'amau se poloka fa'amau e mafai ona aveese 
Tu'u ese se poloka fa'amau e mafai ona aveese
Fa'afeso'ota'i Uaea ile Poloka Fa'amau e Ave'esea
Ina ia fa'afeso'ota'i/ motusia uaea i/mai le poloka fa'amau e mafai ona aveese (RTB), va'ai fa'atonuga o lo'o i lalo.
LAPATAIGA
Fa'aaoga i taimi uma le sapalai fautuaina voltagu ma taimi e puipuia ai le faaleagaina o meafaigaluega ma mautinoa lelei le faatinoga.
Fesootai uaea 
Momotu uaea
Malosi o fanua ma pine fa'amaumauga
Feso'ota'iga i le va o le feso'ota'iga feso'ota'iga G-series ma le fa'alauteleina o le module, fa'apea fo'i ma le fa'aogaina o le eletise o le fa'aogaina o masini pasi e fa'atinoina e ala i le pasi totonu. E aofia ai 2 Field Power Pins ma 6 Data Pins.
LAPATAIGA
Aua ne'i pa'i i fa'amaumauga ma pine mana o le fanua! O le pa'i e mafai ona i'u ai i le palapala ma le fa'aleagaina e le pisa ESD.
| Pin nu. | Igoa | Fa'amatalaga |
| P1 | VCC faiga | Sapalai faiga voltage (5 VDC) |
| P2 | System GND | Eleele faiga |
| P3 | Token output | Fa'ailoga fa'ailoga uafu o le fa'apipi'i module |
| P4 | Fa'asologa fa'asologa | Transmitter uafu galuega faatino o le module processor |
| P5 | Fa'asinomaga fa'asologa | Receiver input port of processor module |
| P6 | Fa'apolopolo | Fa'apolopolo mo fa'ailoga e pasi |
| P7 | fanua GND | fanua fanua |
| P8 | VCC fanua | Sapalai fanua voltage (24 VDC) |
FAQ
- Q: O le a se mea e tatau ona ou faia pe a ou feagai ma se mea sese i faʻailoga o le gaosiga?
- A: Siaki le feso'ota'iga uaea, fa'amautinoa le fa'avasegaina lelei, ma fa'asino ile tusi fa'aoga mo fa'afitauli la'asaga.
- Q: E mafai ona ou faʻaogaina lenei module i siosiomaga i fafo?
- A: O le GT-4218 Analog Output Module e fetaui ma faʻamatalaga faʻapitoa mo le faʻaogaina i fafo, vaʻai i le tusi lesona mo faʻamatalaga.
Pepa / Punaoa
 |
Beijer ELECTRONICS GT-4218 Analog Output Module [pdf] Tusi Taiala GT-4218 Fa'asologa Fa'asologa Fa'atusa, GT-4218, Fa'asologa Fa'asologa Fa'atusa, Fa'asologa Fa'asologa, Fa'asologa |
