Imixholo
fihla
I-Ai-Thinker Ai-M61EVB-S2 Umthombo oVulekileyo we-Hardware WiFi6 iBhodi yoPhuhliso lweMisebenzi emininzi
Ulwazi lweMveliso
| Inguqulelo | Umhla | Uqulunqo/Uhlaziyo | Umbhali | Ivunywe ngu |
|---|---|---|---|---|
| V1.0 | 2023.06.15 | Uhlelo lokuqala | Zekai Qian | – |
Imiyalelo yokusetyenziswa kwemveliso
Ukulungiselela okudanyazayo
- Ukulungiswa kweHardware:
Uluhlu lwezixhobo zokusebenza:- Ibhodi ye-Ai-M61EVB-S2
- USB ukuya kwimodyuli ye-TTL
- Umgca weDuPont (eziliqela)
- Hardware Wiring Umyalelo:
| Hardware | I-Ai-M61EVB-S2 | USB ukuya kwimodyuli ye-TTL |
|---|---|---|
| QTY | 1 | 1 |
| Iintambo | 3V3 GND RXD TXD | USB TTL 3V3 GND TXD RXD |
Ukulungiswa kwesoftware:
- Isoftware yeflash, lungiselela i-firmware:
- Iphakheji yoxinzelelo lwesoftware inikezelwe. Emva koxinzelelo, ulwakhiwo lolawulo luhamba ngolu hlobo lulandelayo:
- Uguqulelo lwesoftware olusetyenziswe kolu vavanyo lwefrikhwensi esisigxina yi-1.8.3. I-firmware inikezelwe.
Ukutsha kweFirmware:
- Ukutshisa i-firmware:
- Qhuba iBLDEvCube.exe
- Khetha i-BL616/618 kudidi lweChip
- Cofa Gqiba
- Ngenisa ujongano lwenkqubo
- Amanyathelo adanyazayo:
- Qhagamshela i-TTL eqhagamshelwe kwimodyuli kwikhompyuter.
- Emva kokuqinisekisa amandla, setha imodyuli kwindlela yokutshisa.
- Inkqubo yokusebenza ethile:
- Cofa ixesha elide iqhosha le-S2 (BURN) ngaphandle kokulikhulula.
- Cinezela iqhosha le-S1 (RST).
- Khupha iqhosha le-S2 (BURN).
- Khetha inombolo yezibuko ye-COM eqhagamshelwe kwitshiphu.
- Khetha i-921600 yexabiso le-Uart.
- Cofa i Yenza kwaye Khuphela iqhosha ukuqala ukukhuphela i-firmware.
- Xa YONKE Impumelelo iboniswa, ithetha ukuba ukukhuphela kwe-firmware kugqityiwe.
Uvavanyo lomsebenzi we-AiPi-Eyes-S2:
- Ukulungiswa kweHardware:
Uluhlu lwezixhobo zokusebenza:- AiPi-Amehlo-S2
- Uhlobo lweC-C
- GC9307N, 3.5inch SPI interface capacitive touch screen
- Isithethi
Qhagamshela isikrini, isithethi, kunye nentambo yohlobo C ebhodini.
- Uvavanyo lwamandla:
Amandla kwimodyuli usebenzisa i-Type-C interface ene-5V yamandla ombane. Emva kokuvula amandla, isikrini sokuqalisa siya kuboniswa. - Lungisa iWiFi:
- Swayipha ezantsi ukusuka phezulu kwesikrini kwaye ucofe iNethiwekhi ukufaka ujongano loqwalaselo lweWiFi.
- Ngenisa igama WiFi kunye negama lokugqitha, kwaye ucofe Qhagamshela.
- Isimo siya kubonisa isimo soqhagamshelwano (Kulungile kuthetha impumelelo, Ukungaphumeleli kuthetha ukungaphumeleli).
- Emva kokuqhagamshelwa ngempumelelo kwi-WiFi, ixesha liya kuhlaziywa ukuya kwixesha laseBeijing ngokuhambelanayo. Qaphela: Ukuqalisa kwakhona imodyuli kuya kufuna ixesha kwakhona, kwaye iWiFi kufuneka iphinde ifakwe.
- Uvavanyo lomsebenzi weqhosha:
Swayipha ezantsi ukusuka phezulu kwesikrini kwaye kuya kubakho amaqhosha amathathu: Inethiwekhi, Buyisela, kunye noLwazi. Imisebenzi ehambelanayo yile ilandelayo:- Inethiwekhi: Qwalasela inethiwekhi
- Buyisela: Qala kwakhona
- Ulwazi: Bonisa ulwazi lwenkqubo
Ukulungiselela okudanyazayo
Ukulungiswa kwehardware
Uluhlu lwezixhobo zokusebenza:
| Hardware | QTY |
| I-Ai-M61EVB-S2 | 1 |
| USB ukuya kwimodyuli ye-TTL | 1 |
| Umgca weDuPont | ezininzi |
Umyalelo wocingo:
| I-Ai-M61EVB-S2 | USB 转 TTL 模块 |
| 3V3 | 3V3 |
| GND | GND |
| RXD | TXD |
| TXD | RXD |
Umzobo wocingo lwebhodi:
Ibhodi iqhagamshela i-TTL:
Ukulungiswa kwesoftware
- Isoftware yeFlash, lungisa i-firmware
- Iphakheji yoxinzelelo lwesoftware imi ngolu hlobo lulandelayo:
- Uluhlu emva koxinzelelo lwesoftware luhamba ngolu hlobo lulandelayo:
- Uguqulelo lwesoftware olusetyenziswe kolu vavanyo lwefrikhwensi esisigxina yi-1.8.3
- I-firmware yile ilandelayo:
- Iphakheji yoxinzelelo lwesoftware imi ngolu hlobo lulandelayo:
- Ukutshisa i-Firmware
Sebenzisa i-BLDevCube.exe, khetha i-BL616/618 kwi-Chip Type, cofa ku-Gqiba, kwaye ufake i-interface yeprogram ngolu hlobo lulandelayo.
Amanyathelo adanyazayo:
- Qhagamshela i-TTL eqhagamshelwe kwimodyuli kwikhompyuter. Emva kokuqinisekisa amandla, kufuneka ubeke imodyuli kwindlela yokutshisa. Inkqubo ethile yokusebenza Cinezela ixesha elide iqhosha le-S2 (BURN) ngaphandle kokuyikhulula, cinezela iqhosha le-S1 (RST), uze ukhulule iqhosha le-S2 (BURN)
- Izibuko le-COM:Khetha inombolo yezibuko ye-COM eqhagamshelwe kwitshiphu (ukuba akukho zibuko leCOM libonisiwe, cofa iqhosha elithi “Hlaziya” ukuhlaziya izibuko le COM ukhetho), khetha 921600 yeUart Rate, cofa iqhosha elithi “Yenza & Khuphela” ukuqalisa ukukhuphela i-firmware, xa "YONKE Impumelelo" iboniswa, Kuthetha ukuba ukhuphelo lwe-firmware lugqityiwe.
- Ujongano lwempumelelo oludanyazayo luloluhlobo lulandelayo:
Uvavanyo lomsebenzi we-AIPi-Eyes-S2
- Ukulungiswa kwehardware
Hardware QTY AIPi-Eyes-S2 1 Uhlobo lweC-C 1 GC9307N, 3.5inch SPI interface capacitive touch screen
1 isithethi 1 - Qhagamshela isikrini, isithethi, Type-C cable ebhodini.
- Uvavanyo lwamandla
- Amandla kwi-interface ye-Type-C enika amandla kwimodyuli, kwaye imodyuli isebenzisa i-5V yokunikezelwa kwamandla. Emva kokuvula amandla, isikrini sokuqalisa simi ngolu hlobo lulandelayo:
- Ujongano oluphambili lulolu hlobo lulandelayo:
- Amandla kwi-interface ye-Type-C enika amandla kwimodyuli, kwaye imodyuli isebenzisa i-5V yokunikezelwa kwamandla. Emva kokuvula amandla, isikrini sokuqalisa simi ngolu hlobo lulandelayo:
- Qwalasela i-WiFi
- Swayipha ezantsi ukusuka phezulu kwesikrini ngomnwe wakho, unokubona amaqhosha amathathu, cofa iNethiwekhi ukufaka ujongano loqwalaselo lweWiFi.
- Ngenisa igama WiFi kunye negama lokugqitha, kwaye ucofe Qhagamshela.
- Emva kokufaka igama elichanekileyo le-WiFi kunye negama lokugqitha, imeko iya kubonisa imeko yoqhagamshelo, KULUNGILE kuthetha impumelelo, kwaye Ukusilela kuthetha ukungaphumeleli.
- Emva kokuqhagamshelwa ngempumelelo kwi-WiFi, ixesha liya kuhlaziywa ukuya kwixesha laseBeijing ngokuhambelanayo. Qaphela: ixesha elifunekayo ukuqalisa kwakhona imodyuli iya kubekwa kwakhona, kwaye i-WiFi idinga ukuphinda ifakwe.
- Swayipha ezantsi ukusuka phezulu kwesikrini ngomnwe wakho, unokubona amaqhosha amathathu, cofa iNethiwekhi ukufaka ujongano loqwalaselo lweWiFi.
- Uvavanyo lomsebenzi weqhosha
- Amaqhosha amabini anikezelwa kwi-interface ephambili, etshintshayo kunye neqhosha. Okwangoku, amaqhosha awanayo imisebenzi engafunekiyo. Isithethi kuphela siphendula kwisimo seqhosha emva kokucofa, kwaye ilizwi lisasaza "vula iswitshi" kwaye "cima iswitshi".
- Xa iqhosha lokulala kwikona esezantsi ekunene licinezelwe, isikrini siya kungena kwindlela yokulala. Isikrini siya kungena ngokuzenzekelayo kwimodi yokulala ukuba akukho nto yokuchukumisa i-30s.
- Kwimo yokulala, ukukhanya kwesikrini kuphantsi kwaye lixesha kuphela eliboniswayo.
- Swayiphela ezantsi ukusuka phezulu kwesikrini ngomnwe wakho kwaye kuya kubakho amaqhosha amathathu, angala iNethiwekhi, Buyisela, kunye noLwazi. Imisebenzi ehambelanayo yile, qwalasela inethiwekhi, qala ngokutsha, kunye nolwazi lwenkqubo. Emva kokucofa ulwazi, ulwazi olulandelayo luvela.
Qhagamshelana nathi
- Igosa webindawo:https://www.ai-thinker.com
- I-DOCS yoPhuhliso:https://docs.ai-thinker.com
- IiForam ezisemthethweni:http://bbs.ai-thinker.com
- Thenga sample:https://ai-thinker.en.alibaba.com/
- Intsebenziswano yeshishini:overseas@aithinker.com
- Inkxaso:support@aithinker.com
- Idilesi yeOfisi:Igumbi 410, Isakhiwo C, Huafeng Intelligence Innovation Port, Gushu, Xixiang, Baoan District, Shenzhen 518126, China
- Umnxeba: 0755-29162996
Amaxwebhu / Izibonelelo
 |
I-Ai-Thinker Ai-M61EVB-S2 Umthombo oVulekileyo we-Hardware WiFi6 iBhodi yoPhuhliso lweMisebenzi emininzi [pdf] Incwadi yokusebenzisa I-Ai-M61EVB-S2 Umthombo oVulekileyo we-Hardware WiFi6 iBhodi yoPhuhliso lweMisebenzi emininzi, i-Ai-M61EVB-S2, i-Open Source Hardware WiFi6 iBhodi yoPhuhliso lweMisebenzi emininzi, iBhodi ye-Hardware WiFi6 yoPhuhliso lweMisebenzi emininzi, iBhodi ye-WiFi6 yoPhuhliso lweMisebenzi emininzi, uPhuhliso lweMisebenzi emininzi. Ibhodi, iBhodi yoPhuhliso, iBhodi |