Werkzeugbox 7381SA2 Toolbox
Specifications
- Product Name: Werkzeugbox
- Model Number: 41601-000
Product Information
This Werkzeugbox includes a toolbox, cover, protective cap, thread locking fluid, clamping washer, and various screws for assembly.
Toolbox
The colors are for illustrating purposes only.
KEY
With the box locked, the seal will have adjusted itself optimally after 1-2 days. The shim is used for fine adjustment, removing it increases the tension of the striker plate.
Assembly Steps
- Place the toolbox on a flat surface.
- Attach the cover securely to the toolbox using the provided screws.
- Install the protective cap at the designated location.
- Apply the thread-locking fluid as needed during assembly.
- Use the clamping washer for additional support.
Maintenance Tips
- For optimal sealing, lock the box for 1-2 days to allow the seal to adjust.
- Use the shim for fine adjustments; removing it increases tension on the striker plate.
FAQs
Q: How long does it take for the seal to adjust optimally?
A: The seal will adjust optimally after 1-2 days when the box is locked.
Q: What is the purpose of the shim provided with the toolbox?
A: The shim is used for fine adjustment; removing it increases tension on the striker plate.
Wunderlich GmbH I Joseph-von-Fraunhofer-Str. 6-8 I DE·53501
Grafschaft-Ringen www.wunderlich.de I Tel.: +492641 3082-0
Documents / Resources
 |
Werkzeugbox 7381SA2 Toolbox [pdf] Installation Guide 41601-000, 7381SA2, 7381SA2 Toolbox, 7381SA2, Toolbox |