VIMAR 19467 Connected NFC/RFID Switch Grey
Product Specifications:
- Power Supply: 100-240 V~, 50/60 Hz
- Power Consumption: 1.1 W
- RFID Frequency: 13.56 MHz
- Operating Frequency: 13,553-13,567 MHz
- Sound Level: < 60 dBA/m
- IP Rating: IP20
- Wireless Frequency: 2400-2483.5 MHz
- Wireless Power: < 100 mW (20 dBm)
- Max Current: 16 A (3.5 A for relay output)
- Max Power: 100 W – 240 V~, 30 W – 120 V~
Product Usage Instructions
Installation:
- Ensure the power supply matches the product requirements.
- Mount the device in a location with good wireless signal reception.
- Connect the necessary wires following the provided wiring diagram.
- Securely fasten the device in place.
Configuration:
- Press the configuration button to enter setup mode.
- Follow the user manual instructions for configuring settings.
- Test the device to ensure proper functionality.
Usage:
Once installed and configured, the device can be used to control various functions wirelessly via a compatible smartphone or tablet.
Frequently Asked Questions
Q: How do I reset the device to factory settings?
A: To reset the device, press and hold the configuration button for 10 seconds until the LED indicator flashes rapidly.
Q: What should I do if the wireless connection is unstable?
A: Ensure there are no physical obstructions between the device and the wireless router. You may also try relocating the device closer to the router for a stronger signal.
Download the View Wireless App from the stores onto the tablet/smartphone you will be using for configuration
You will need
| Gateway | Art.
30807.x – 20597 – 19597 – 14597 |
FRONT VIEW AND CONNECTIONS
| A | Illuminated pocket |
| B | Configuration button |
| L | Phase |
| N | Neutral |
| IN | Input (not used) |
| NO | Relay output |
INSTALLATION
COVER REMOVAL
COVER REMOVAL
FEATURES
| Rated supply voltage | 100-240 V~, 50/60 Hz |
| Max. power absorption from the mains | 1,1 W |
| RFID technology @ 13.56 MHz, ISO14443A Mifare standard | |
| RF transmission power | 13,553-13,567 MHz |
| Frequency range | < 60 dBμA/m |
| Operating temperature: -5 °C – +45 °C (inside) | |
| Configuration via View Wireless App for Bluetooth technology system | |
| Protection degree | IP20 |
| Frequency range | 2400-2483,5 MHz |
| RF transmission power | < 100 mW (20 dBm) |
TERMINALS
| L and N for power supply |
| Relay output 16 A 240 V~ C-NO (NO SELV) |
| IN input (not used) |
CONTROLLABLE LOADS
| Heating 16(3,5) A (100.000 cycles | |
| Resistive loads | 16 A |
| Cos ø 0.6 motors | 3,5 A |
| Cycles | ||
 Incandescent lamps |
5 A | 20.000 |
 Fluorescent lamps |
0,5 A | 20.000 |
 LED lamps |
100 W-240 V~
30 W-120 V~ |
20.000 |
 Electronic transformers |
4 A | 20.000 |
INSTALLATION RULES
Do not connect a SELV circuit to the C-NO terminals as there is no double insulation with on the L-N terminals
- The device and the load controlled must be protected against overloads by installing a device,fuse or automatic 1-way switch, with a rated current not exceeding 16 A
- Do not install two access control devices in the same mounting frame
Important: The length of the cable for connection with the inputs must be no more than 30 m.
The full text of the EU declaration of conformity is on the product sheet available at the following Internet address: www.vimar.com
DEVICE DETAILS, CONFIGURATION AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT
FROM THE PRODUCT DATA SHEET ON www.vimar.com (the QR code opens the data sheet of art.
30813.B, which shares the same instructions sheet as art. 30813.x-20467-19467-14467).
Viale Vicenza, 14
36063 Marostica VI – Italy
49401771A0 03 2501 www.vimar.com
Documents / Resources
 |
VIMAR 19467 Connected NFC/RFID Switch Grey [pdf] Instruction Manual 20467, 14467, 19467 Connected NFC RFID Switch Grey, 19467, Connected NFC RFID Switch Grey, NFC RFID Switch Grey, RFID Switch Grey, Switch Grey, Grey |