VIMAI V10 Wireless Microphone User Manual

Introduction
Thank you for choosing our product.
This product is a smart wireless microphone, which can provide profession- al-level recording output.Plug-and-play, no APP.
Multiple uses: Can be used for live streaming, Video Recording, Interviewing< Online Teaching and others.
The wireless microphone is consist of three parts, one is the Microphone Transmitter and the other one is 3-in-1 multi-function receiver and the other one is charging case. (As below picture).
- (Microphone Transmitter)

- (3-in-1 Multi function Receiver)

- (Charging case)

Packing list
- Microphone transmitter *2
- 3-in-1 multi function receiver *1
- Type-C charging cable *1
- User Manual *1
- 3.5mm adapter cable *1
- Charging case *1
Product Structure Diagram
Charging case specifications
Input voltage: DC4.8~5.4V
Charging time: about 1.5 hours
Weight: about 162.9g
Battery capacity: 600mAh
Recharging times: 2 times
Size: 110.99*81.06*38.00mm
Microphone specifications
Sampling rate: 48KHz
Latency: 25ms
Frequency response range: 20-20KHz
Input voltage: DC4.8~5.4V
Sensitivity: –42 dBFS
SNR: 85dB
Frequency range: 2.4GHz
Battery capacity: 70mAh
Working time: about 6 hours
Charging time: about 1.5 hours
Weight: about 8 g
Size: 62.89 20.14*16.81mm
Receiver specification
Frequency range: 2.4GHz
Latency: 25ms
Frequency response rang: 20-20KHz
Weight: about 18.1g
Input voltage: DC4.8-5.4V
Size: 54.00*46.80*22.60mm.
Microphone transmitter schematic diagram
- Windproof Sponge
- Indicator light
- Type C charging port
- Microphone Clip
- Power button
- Metal contact points

3-in-1 receiver schematic diagram
- Power button
- Volume button
- Indicator light
- Type C receiver
- Lightning receiver
- 3.5mm TRS interface
- 3.5mm monitor interface
- Type C charging port of receiver
- Metal contact points

Charging case schematic diagram
- Charging case
- Indicator light
- Type C charging port of receiver

How to use Lightning/Type-C receiver
Step 1: Open the cover of charging case, receiver automatically turn on and paired, and the green light is on. Plug the Lightning receiver or Type-C receiver into the Lightning port or Type-C port of your phone. (If you manually press the power button to start up, the green light flashes slowly).

Step 2: Open the cover of charging case, microphones are automatically turned on and paired, the green light is always on. (If you manually press the power button to start up, the green light flashes slowly and then go solid green after paired successfully).

Last: When both of the receiver and microphone are paired successfully and the green light is steady on, it can be used normally.

Special Note:
The using method of Number 8, If the mobile phone is in low battery during live streaming, The external power supply directly charges the phone through the Type-C port of the receiver.

How to use 3.5 mm receiver
Step 1: Open the cover of charging case, both microphone and receiver are automatically turned on and paired, the green light is steady on. Connect the receiver with a 3.5 device (such as a camera) with the equipped 3.5mm adapter cable.

Step 2: If the microphone and receiver are powered on manually, please refer to the LIGHTNING/TYPE-C receiver usage method..
Microphone Transmitter
| Function | Operations | Light effect |
| Power on | Press power key 1s/ Open the cover | Green light on |
| Power off | Long press power key 35/ Put in charging case and close the cover/ Auto turn-off if not connected for more than minutes | Green light off |
| Charging | Type-C cable charging | Red light on when charging, Red light off |
| Search for pairing | / | Green light flashed slowly |
| Paired | / | Green light always on |
| Low battery alarm | Battery<20 | Blue light flashes slowly |
| Mute | Single Press | Blue light always on |
| Clear pairing | After turn on quickly press reset key 4 times in 10 seconds | Green light flashes quickly |
About UI
Lightning/Type-C Receiver
| Function Power on |
Operations Plug in the device to power on / Open the cover to power on |
Light effect Green light flashes |
| Power off | Plug off the device | Light off |
| Searching for pairing | / | Green light flashes slowly |
| Paired | / | Green light on |
| Clear pairing | After turn on quickly press reset key 4 times in lOs | Green light flashes quickly |
| Noise reductionlevel, loop control | Single press volume “+” ” – ” key | ANC OFF: Green light flashes once Standard ANC: Green light flashes twice (by default)Strong ANC: Green light flashes three times |
| Monitor volumeup and down, loop control | Double press volume “-F ” „ _ „ke Y | Level 1: red light flashes onceLevel 2: red light flashes twice (by default)Level 3: Red light flashes three times |
| The volume level has a memory function, and the volume level of the last shutdown is defaulted when the power is turned onThe noise reduc ion level has a memory function, and the default noise reduction level of the last shutdown | ||
3.5mm Receiver
| Function | Operations | Light effect |
| Power on | Press power key 1s/ Open the cover | Green Light Flashes |
| Power off | Long press power key 3s/ Put in charging case and close the cover | Light off |
| Searching for pairing | / | Green light flashes slowly |
| Paired | / | Green light on |
| Low Power State | Battery in low power state | Red light flashes |
| Clear pairing | After turn on quickly press reset key 4 times in 1 Os | Green light flashes quickly |
| Noise reductionlevel, loop control | Single press volume “+ ” ” ” key | ANC OFF: Green light flashes once Standard ANC: Green light flashes twice(by default)Strong ANC: Green light flashes three times |
| Monitor volume up and down,loop control | Double press volume “+ ,'” – ” key | Level 1: red light flashes onceLevel 2: red light flashes twice (by default)Level 3: Red light flashes three times |
Charging case function description
| Function | Light effect |
| Charging | Charging: Red light on Fully Charged: red light off |
| Charging the Mic | Charging: blue/green light on Fully Charged: blue/Green light off |
| Charging the receiver | Charging: white light on Fully Charged: White light off |
| Red light Flashes: 35%-13% |
Safety Warning
In order to avoid electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use of the product may cause personal injury or property damage, please read carefully and comply with the following matters before using this product:
- When using the product, please confirm that the connected equipment and the product power match and reasonable adjustment of the volume of the equipment do not exceed the product power and loud volume for a long time, so as not to cause abnormalities in the product.
- If abnormalities are found in use (such as smoke, odor, etc.), please immediately turn off the power switch and turn off the power plug and then send the product to the dealer for repair.
- This product and accessories should be placed in a dry and ventilated place indoors, do not store for a long time in a humid, dusty environment avoid near fire, rain, water, excessive collision, throwing, vibration of the machine and cover the ventilation hole to avoid damage to its function.
- The use of the product must comply with the relevant safety regulations, laws and regulations clearly prohibit the use of the occasion please do not use the product, so as not to cause accidents.
- Please do not disassemble and modify or repair the machine by yourself to prevent personal injury, if you have questions or service needs, please contact your local dealer to follow up.
Symbols



Documents / Resources
![]() | V10 Wireless Microphone |
References
- User Manualmanual.tools
