UNITRONICS UAC-01EC2 EtherCAT Master Module
UAC-01EC2
Unitronics offer EtherCAT™ Master module for UniStream PLC series that need to be updated on new firmware release.
Firmware Update Procedure
- Download the latest UAC-01EC2 firmware version from Unironic website (www.unitronicsplc.com)
- Make sure the system is idle.
- Extract the ZIP compressed file content to root folder of your flash drive (DOK), the flash drive must be FAT32 formatted.
- Plug the USB flash drive into the UAC-01EC2 USB port.
- Using the PLC UniApps menu, System tab, Upgrade, access the Ether CAT section.
- If previous version displayed, ex. 1.0.36500.0, press the Upgrade button. Otherwise, press Force Upgrade.
- When finish, reboot the system completely and validate the Ether CAT master menu again using the Uni Apps menu.
Documents / Resources
 | UAC-01EC2 EtherCAT Master Module |
 | UAC-01EC2 EtherCAT Master Module |
References
- Unitronics- Programmable Logic Controller + Built-in HMIwww.unitronicsplc.com
- Unitronics- Programmable Logic Controller + Built-in HMIwww.unitronicsplc.com
- User Manualmanual.tools
Published: October 12, 2022