AI Monitor iOS Apps
User Guide
Download and Install the AI Monitor iOS
App
AI Infrared Monitor System All-In-One ULTI-A100 
Tap on Download iOS App
Software Confi guration (iOS)
Connect to ULTI-A100 using the ULTI-
A100’s IP Address
a) Enter the ULTI-A100’s IP address in the IP Address fi eld. If there is a port number, add it at the end of the URL with a prefix.
b) Tap on the Connect button
Log in with Admin Credentials
Type in username admin, password admin123 and click on log in.
Viewing the Live Video Stream of an AI Infrared Monitor ULTI-A100 Unit
a) Tap on Preview to view the live video stream from an AI Infrared Monitor ULTI-A100 units camera, choose the camera from the drop-down menu from the bottom-left set of controls, and tap on the button.
b) Tap on Confi guration to switch from the Preview screen to the Confi guration screen
Revealing the Function Menu
Tap on to reveal the function menu, because the function menu is Tap on to reveal the function menu, because the function menu is hidden by default
Hiding the Function Menu
Tap on the right pane to hide the function menu
Logging out of the Admin Account
Tap on Logout on the upper-right corner to log out of the admin account
Tap on Edit in the upper-right corner to change the IP address needed to connect to the ULTI-A100, if required. If there is a port number, add it at the end of the URL with a prefix.
Software Confi guration (Android)
Open the All-in-One ULTI-A100 Product Page
Enter URL https://tinyurl.com/y6nu4x9w into a Web browsers Address fi eld or scan the QR code above, to quickly access the AI Monitor Product Page
Download and Install the AI Monitor Android App
Tap on Download Android App
Connect to ULTI-A100 using the ULTIA100s IP Address
a) Enter the ULTI-A100s IP address in the IP Address fi eld. If there is a port number, add it at the end of the URL with a prefix.
b) Tap on the Connect button
Log in with Admin Credentials
Type in username admin, password admin123 and click on log in.
Viewing the Live Video Stream of an AI Infrared Monitor ULTI-A100 Unit
a) Tap on Preview to view the live video stream from an AI Infrared Monitor ULTI-A100 units camera, choose the camera from the drop-down menu from the bottom-left set of controls and tap on the button.
b) Tap on Confi guration to switch from the Preview screen to the Confi guration screen
Revealing the Function Menu
Tap on to reveal the function menu, because the function menu is Tap on to reveal the function menu, because the function menu is hidden by default
Hiding the Function Menu
Tap on the right pane to hide the function menu
Logging out of the Admin Account
Tap on Logout in the upper-right corner to log out of the admin account
Optional
Changing the IP Address Needed to Connect to ULTI-A100 
Tap on Edit on the upper-right corner to change the IP address needed to connect to the ULTI-A100, if required. If there is a port number, add it at the end of the URL with a prefix.
The AI Infrared Monitor ULTI-A100 unit is now set up and ready for use Notifi cation
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The distance between user and device should be no less than 20cm. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ULSee Inc.
Address
9F, No.97, June 1st Road, Zhongshan District,
Telephone +886-2-8502-2798
Website https://ulsee.com/#/
E-mail service@ulsee.com
Documents / Resources
 |
ULSee AI Monitor iOS Apps [pdf] User Guide UA100, 2AWAO-UA100, 2AWAOUA100, AI Monitor iOS Apps, AI Monitor iOS, Apps |
