Quick Start Guide for
Connector Mini Bridge
Model: DD1554E
Product Certification 
Mini Bridge allows user to link their motorized shutters, blinds, and curtains into Wi-Fi network, enabling control via smart APP and interaction with other IoT products.
Step 1 Download APP
Please scan below QR code.
Step 2
Please scan below QR code to learn more about link up Mini Bridge with home Wi -Fi router, setup Connector APP, and establish connection with other IoT applications.
- Program Button
- Indicator
Program / Pairing:
Press and hold program button for about 2 seconds, then release until the LED blinks purple.
Reset:
Press and hold program button for about 10 seconds, then release until the LED blinks red.
Product Parameter
Indoor use only Wi-Fi : 2.4GHz (802.11b/n/g)
Power Input: DC 5V/1A (USB Type-A)
Radio frequency: 433, 92MHz
Working temperature: 0°C ~ 40°C
Dimension(mm): L83.8 * W30.7* H13.9
Status Indicator
| Color | Meaning | Duration |
 Constant Blue |
Working fine | Constant |
 Slow Flashing Red |
Wi-Fi is disconnected | Continuously till status change |
 Slow Flashing Yellow |
Wi-Fi is connected | Continuously till status change |
 Quick Flashing Red |
Bridge reset | 5 times |
 Slow Flashing Purple |
Pairing underway | Continuously till status change |
 Slow Flashing Green |
Upgrade in progress | Continuously till status change |
Caution:
This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: Connector (FCC ID: 2BA3XDD1554E) has also been tested against this SAR limit. SAR information can be viewed on‐line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 5mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
Documents / Resources
 |
UBLOCKOUT DD1554E Connector [pdf] User Guide 2BA3XDD1554E, 2BA3XDD1554E, dd1554e, DD1554E, Connector Mini Connector, DD1554E Connector Mini Connector, Mini Connector, Connector |
