Connector Manuals & User Guides

GUARDIAN 00370 D-Bolt Anchorage Connector Instruction Manual

October 1, 2026

D-BOLT Anchorage Connector The D-BOLT anchorage connector is used to support fall protection systems in designated applications. Select and install the connector using compatible equipment and follow all installation, inspection, and safety requirements in this manual. Specifications Part # Minimum…

Brand: GUARDIAN

OBDSTAR M001A Main Test Cable Auto Diagnostic Connector Instruction Manual

September 29, 2026

OBDSTAR M001A Main Test Cable Auto Diagnostic Connector Overview The OBDSTAR M001A Main Test Cable is an original connecting harness for the OBDSTAR PAD auto diagnostic scanner series. It links the diagnostic host to a vehicle’s OBD port for stable…

Brand: OBDSTAR

INFICON IFCBT-Dongle Connector User Manual

September 19, 2026

INFICON IFCBT-Dongle Connector About This Manual This document applies to IFCBT-Dongle with the specified software version see title page. Product names may occur in the document, which are added for identification purposes only and belong to the respective owner of…

Brand: INFICON

Durvela WAGO 221 Fuse Connector User Guide

September 11, 2026

Durvela WAGO 221 Fuse Connector Specifications Item Specification Power source (adapter) Regulated 12 VDC, center-positive, rated 1 A or more Fuse bridge component RUEF110 (two leads) WAGO connectors One WAGO on each side of the fuse (WAGO 1 and WAGO…

Brand: Durvela

VEVOR HT-04 Railing Connector User Manual

September 5, 2026

VEVOR HT-04 Railing Connector This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please…

Brand: VEVOR

Panasonic MX0205 Hand Blender Set User Manual

August 22, 2026

Panasonic MX0205 Hand Blender Set Specifications Model MX0205 (4 in 1 Hand Blender) Rated input 220–240V, 50/60Hz Rated power 1200W (CLASSF) Power cord Plug: UE-212, AC250V; 16A; Wire: H03VVH2-F 2×0.75mm²; Total exposed length 1.2m (excluding plug) Working environment Temperature range:…

Brand: Panasonic

TED MANUFACTURING BNC Male Connector Instruction Manual

August 19, 2026

BNC Male Connector Instruction Manual REVISIONS SYM. DESCRIPTION DATE APPROVAL A  1/2/15 SW Layout and identify all parts as shown above. Cut cable off square do not deform. Slide cable nut, busing, cable clamp, washer and v-groove gasket over cable…

Brand: TED Manufacturing

2UUL SC96 Gold Plated FPC Connector User Manual

July 31, 2026

2UUL SC96 Gold Plated FPC Connector Quick Setup Screw one SC96 needle tightly onto a matching desoldering pen handle (handle sold separately). Heat the solder joint with a soldering iron or hot air gun until the solder is fully melted.…

Brand: 2UUL

Paxton10 Alarm Connector Instruction Manual

July 28, 2026

Paxton10 - I/O Connector APN-0066-AE Overview The Paxton10 - I/O Connector is an expansion module designed to provide additional input and output capability to a Paxton10 system. It allows installers to integrate external devices such as lighting, HVAC, lift control,…

Brand: Paxton

Paxton10 APN-0066-US I-O Connector User Guide

July 28, 2026

Paxton10 APN-0066-US I-O Connector Specifications Device type Expansion module (additional I/O) Purpose Provide additional input and output capability to a Paxton10 system Available variants 3 variants available (details provided only for one variant in the source) Variant: I/O Connector 8…

Brand: Paxton10