U PROX PIR Cam Indoor Detectors User Guide

User manual
WIRELESS PET IMMUNE MOTION DETECTOR WITH CAMERA
Is part of the U-PROX security alarm system
Manufacturer: Integrated Technical Vision Ltd.
Vasyl Lypkivsky str. 1, 03035, Kyiv, Ukraine

Contents hide

1 PIR Cam Indoor Detectors

2 TECHNICAL SPECIFICATIONS

3 REGISTRATION

4 INDICATION

5 Documents / Resources

5.1 References

PIR Cam Indoor Detectors

http://www.u-prox.systems/doc_pircam

LLC INTEGRATED TECHNICAL VISION declares, that the U-PROX PIR Cam complies with the Radio Equipment Directive 2014/53/EU and with the Directive 2011/65/EU (RoHS). The original Declaration of Conformity is available on the website www.security.u-prox.systems in the Certiﬁcates section.
U-PROX PIR Cam – is a wireless motion detector. The device is equipped with a PIR-sensor and camera and is designed for the security of any indoor residential or industrial premises. When the thermal balance of the environment changes the device sends an alarm notiﬁcation and photos to the U-PROX control panel. Supports series of photos and photo on demand. For indoor use only.
The device is connected to the control panel and is conﬁgured with the U-PROX Installer mobile application.
Functional parts of the device (see picture)

Device case

Light indicator of the operation modes
Fresnel lens

Сamera lens
Camera ﬂash

Bracket for mounting
Tamper switch

Back of the device
On/Oﬀ switch

TECHNICAL SPECIFICATIONS

Motion detector

Maximum working dista	12 m
Detection angle	0.3 to 3 m/s
PIR target detection spe:	weight up to 20 kg
Optical noise immunity	Camera
Pet immunity	88°

Camera

Maximum distance	daylight – up to 12 m night (with camera ﬂash) – up to 8 m
Resolution	Adjustable – 640480, 320240, 160*120,
Photo transmit time	up to 9 seconds (average quality)
Transferring photos	signal level > -90 dBm, battery charge > 15%
Power	3V, two CR123A lithium batteries included
Service life of battery	up to 3 years
Radio frequency	ISM-band wireless interface with several channels ITU region 1: 868.0 to 868.6 MHz, (EU, UA) 869.0 to 869.4 (MA), bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight); ITU region 3 (AU): 916.5 to 917 MHz, bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight).
Communication	Secure two way communication, sabotage detection, key – 256 bits
Operating temperature	-10°C to +55°C
Permissible humidity	II (according to EN 50131-1)
Environmental class	up to 75%
Security grade	2
Dimensions & weight with a bracket	130 х 70 х 46.5 mm & 210 grams 130 x 70 x 61.6 mm
Case colour	white, black

COMPLETE SET

U-PROX PIR Cam;

Two CR123A batteries (pre-installed);
Bracket;

Mounting kit;
Quick start guide

CAUTION. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS
ATTENTION. U-PROX PIR CAM IS COMPATIBLE WITH U-PROX MPX SERIE OF SECURITY CENTERS ONLY
WARRANTY
Warranty for U-PROX devices (except batteries) is valid for two years after the purchase date.If the device operates incorrectly, please contact support@u-prox.systems at first, maybe it can be solved remotely.