Tag Archives: Detectors

Honeywell Fire Sentry SS4 Fire and Flame Detectors Owner’s Manual

Honeywell Fire Sentry SS4 Fire and Flame Detectors Fire Sentry SS4-A and SS4-AS Features Multi-Spectrum™: senses ultraviolet, visible, and Wide Band Infrared™ Built-in test for optical “through the lens” testing False alarm immunity Detects hydrocarbon and non-hydrocarbon-based fires Wide field-of-view and solar-blind Adjustable detector sensitivity Microprocessor-based algorithms: FirePic™, Snapshot™ and Tri-Mode Plot™ Wide temperature range …

Continue reading “Honeywell Fire Sentry SS4 Fire and Flame Detectors Owner’s Manual”

NOTIFIER BEAM1224(A) and BEAM1224S(A) Conventional Beam Smoke Detectors Instructions

NOTIFIER BEAM1224(A) and BEAM1224S(A) Conventional Beam Smoke General The System Sensor BEAM1224 and BEAM1224S are four-wire conventional reflected beam smoke detectors. They are uniquely suited for protecting open areas with high ceilings where spot-type smoke detectors are difficult to install and maintain. BEAM1224 and BEAM1224S are to be used with UL Listed compatible fire alarm …

Continue reading “NOTIFIER BEAM1224(A) and BEAM1224S(A) Conventional Beam Smoke Detectors Instructions”

NOTIFIER 30-2021-24 and 30-2021E-24 Ultraviolet Flame Detectors Owner’s Manual

NOTIFIER 30-2021-24 and 30-2021E-24 Ultraviolet Flame Detectors Owner’s Manual General The Pyrotector Model 30-2021-24 and Model 30-2021E-24 Ultraviolet (UV) Flame Detectors are highly sensitive to the ultraviolet radiation given off by all types of flames, including those produced by flammable liquids and gases. Since the detector does not respond to normal ambient light conditions such …

Continue reading “NOTIFIER 30-2021-24 and 30-2021E-24 Ultraviolet Flame Detectors Owner’s Manual”

SYSTEM SENSOR BEAMMMK Multi-Mounting Kit for use with Reflective Projected Beam Smoke Detectors Instruction Manual

SYSTEM SENSOR BEAMMMK Multi-Mounting Kit for use with Reflective Projected Beam Smoke Detectors INSTALLATION AND MAINTENANCE INSTRUCTIONS BEAMMMK Multi-mounting Kit for use with Reflective Projected Beam Smoke Detectors 3825 Ohio Avenue, St. Charles, Illinois 60174 800/736-7672, FAX: 630/377-6495 www.systemsensor.com Notice: This manual should be left with the owner/user of this equipment. GENERAL DESCRIPTION The BEAMMMK …

Continue reading “SYSTEM SENSOR BEAMMMK Multi-Mounting Kit for use with Reflective Projected Beam Smoke Detectors Instruction Manual”

SIEMENS Cerberus Pyrotronics AD-3XRI and AD-3XRILP Air Duct Detectors Instruction Manual

SIEMENS Cerberus Pyrotronics AD-3XRI and AD-3XRILP Air Duct Detectors Instruction Manual Installation/Wiring Instructions CERBERUS PYROTRONICSTM Wodels AD-3XRI and AD-3XRILP Air Duct Detectors INTRODUCTION CERBERUS PYROTRONICSTM Model AD-3XRI and AD-3XRILP Detectors are System IXL (ICON-1), System XL3, and MXL Control Panel compatible air duct detectors with an auxiliary relay. They are designed for use in heating, …

Continue reading “SIEMENS Cerberus Pyrotronics AD-3XRI and AD-3XRILP Air Duct Detectors Instruction Manual”

ADEMCO 652EX Passive Infrared Motion Detectors Instruction Manual

INSTALLATION INSTRUCTIONS SUPPLEMENT Nos. 6520(, 653EX PASSIVE INFRARED MOTION DETECTORS 652EX Passive Infrared Motion Detectors These Instructions supplement, and should be used in conjunction with, the “basic” Installation Instructions for the Nose 652-12 and 65312 Passive infrared Motion Detectors (Men Except as described below, all information in the “basic” installation instructions for the Not 652-12 …

Continue reading “ADEMCO 652EX Passive Infrared Motion Detectors Instruction Manual”

GE Security 700 SERIES Commercial Self-Diagnostic Smoke Detectors Instruction Manual

GE Security 700 SERIES Commercial Self-Diagnostic Smoke Detectors Instruction Manual Installation Instructions The ESL 700 Series self-diagnostic detectors provide field-replaceable optical chambers, and rate-of-rise heat detectors with fast response algorithms in some models (711UT, 721UT, and 741UT). Electrical Compatibility The two-wire units are compatible with a wide range of UL Listed control panels. For information on …

Continue reading “GE Security 700 SERIES Commercial Self-Diagnostic Smoke Detectors Instruction Manual”

Honeywell 1701M5000HL Series Flame Detectors and associated Test Lamps User Guide

1701M5000HL Series Flame Detectors and associated Test Lamps User GuideQUICK REFERENCE GUIDE for Hazardous Location Installation Series Flame Detectors and associated Test Lamps 1701M5000HL Series Flame Detectors and associated Test Lamps The Honeywell® Analytics Flame Detectors and Test Lamps are hazardous area products. They are factory calibrated, and the robust sealed design with no moving …

Continue reading “Honeywell 1701M5000HL Series Flame Detectors and associated Test Lamps User Guide”

POTTER Thermotech 302 Series Heat Detectors Owner’s Manual

POTTER Thermotech 302 Series Heat Detectors Features Hermetically sealed and explosion-proof options Horizontal or vertical mounting ability Select models available for indoor and outdoor use Aluminum tubing with silver contact points Description Each model is a normally open device designed especially for fire detection and alarm systems. These rate compensation type detectors are available in …

Continue reading “POTTER Thermotech 302 Series Heat Detectors Owner’s Manual”

POTTER IPA Series Addressing PAD Detectors and Modules Owner’s Manual

POTTER IPA Series Addressing PAD Detectors and Modules Owner’s Manual Addressing PAD Protocol Detectors & Modules  All PAD detectors’ and modules’ addresses are set by changing the dip switches located on each device. An address must be set prior to connection. PAD Addresses  PAD addresses are comprised of a seven (7) position dip switch used …

Continue reading “POTTER IPA Series Addressing PAD Detectors and Modules Owner’s Manual”