UH9120C USB Type-C 9-in-1 Hub

Product Information

Specifications

  • USB Type-C 9-in-1 Hub
  • Micro SD and SD card slots
  • USB-C Connector with USB-C PD (Power Delivery) Port
  • USB 3.0 for 5 Gbps data transfer
  • Supports up to 4K@60Hz video output
  • TF (microSD) Card Slot with SD 3.0 support
  • Gigabit Ethernet Port for wired network connection
  • Plug and Play compatibility with various systems

Product Usage Instructions

  1. Plug and Play: Connect the USB-C connector to
    your host device and plug in external peripherals to the hub.
  2. Charging: Use a PD charger to charge your host
    device through the USB-C PD port.
  3. Tips:
    • Unplug external peripherals before removing the hub from your
      host device.
    • For charging with a PD charger, ensure compatibility and
      correct power output.

FAQ

Q: Do I need a PD charger to use this hub?

A: No, the hub supports Plug and Play functionality without
requiring a PD charger. However, you can use a PD charger for
charging purposes.

Q: Can I use this hub with older operating systems?

A: The gigabit Ethernet port may require a driver for certain
older operating systems. Visit our official website for driver
downloads.

Q: How do I ensure proper charging with a PD charger?

A: Use an original or certified PD charger that meets the input
specifications of the USB-C PD port on the hub.

“`

Quick Installation Guide

1 Product Overview

USB Type-C 9-in-1 Hub
Images are for demonstration only. ©2025 TP-Link 1910013881 REV1.0.0

Micro SD

SD

USB-C Connector USB-C PD (Power Delivery) Port*
USB-C Port HDMI® Port

For connecting to your host device.
For unidirectionally charging your host device when connected to a PD charger. PD 3.0; Up to 100W * Does not support data transfer.
USB 3.0; 5 Gbps data transfer
Up to 4K@60Hz (backward compatible)

TF (microSD) Card Slot SD 3.0; UHS-I, 104 MB/s;

Supports simultaneously reading

SD Card Slot

and writing two cards

Gigabit Ethernet Port

For connecting to a wired network provided by a router, modem, etc.

USB-A Ports ×3

USB 3.0; 5 Gbps data transfer

Note: The ports’ actual performance may vary based on your host device specifications.

Input Supported Systems
Plug and Play

PD: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A USB-C Connector: 5V/3A
Windows, macOS, iPadOS, iOS, ChromeOS, Linux, Android
USB-C PD port, USB-C port, HDMI® port, TF (microSD) card slot, SD card slot, USB-A ports, gigabit Ethernet port.*
* The gigabit Ethernet port may require installing a driver for compatibility with certain older operating systems. Please visit our official website at www.tp-link.com to download the necessary driver for these systems:
· Windows 7/8 · Mac OS X 10.9 to 10.15

2 Using the Hub
This hub supports the Plug and Play feature. Plug the USB-C connector into your host device, then plug in your external peripheral into the corresponding port of the hub. Note: A PD charger (not included) is not required. If you wish to use a PD charger to charge your host device, please refer to Tips (2B).
USB-C Connector USB-C Port

Tips:
1. When not in use, please unplug or remove the external peripherals from the hub first, and then unplug the hub from your host device.
2. If you need to connect a PD charger to the hub’s USB-C PD port, please:
A) Notice that it only has the charging function and is input only.
B) Use an original or certified PD charger to charge your host device. The output of the PD charger should meet the input specifications of the USB-C PD port.

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/ TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016. The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/

Safety Information
· When the product has a power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
· Keep the device away from water, fire, humidity or hot environments.
· This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.
Operating Temperature: 0°C~40°C (32°F~104°F), Storage Temperature: -40°C~60°C (-40°F ~140°F)

FCC Compliance Information Statement
Product Name: USB Type-C 9-in-1 Hub Model Number: UH9120C Responsible party: TP-Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2025-01-20
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)

Equipment nameUSB Type-C 9-in-1 Hub Type designation (Type)UH9120C

nit
PCB

Restricted substances and its chemical symbols

Lead (Pb)

Mercury Cadmium Hexavalent Polybrominated Polybrominated

(Hg)

(Cd) chromium biphenyls diphenyl ethers

(Cr+6)

(PBB)

(PBDE)

1. 0.1 wt %0.01 wt % Note 1″Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2″” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The “-” indicates that the restricted substance corresponds to the exemption.

·
·
·
·
·
·

Explanation of the symbols on the product label
Symbols may vary from products. Note: The product label can be on the product and its I.T.E. power supply.
Indoor use only
DC voltage
AC voltage
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Energy efficiency marking (level VI)
Polarity of output terminals
Class II equipment
Caution
Operator’s manual

Documents / Resources

tp-link UH9120C USB Type-C 9-in-1 Hub [pdf] Installation Guide
UH9120C, UH9120C USB Type-C 9-in-1 Hub, UH9120C, USB Type-C 9-in-1 Hub, Hub

References

Leave a comment

Your email address will not be published. Required fields are marked *